As long as we are treating Autotools as a first-class citizen, what we
release will be `make distcheck` output.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The tests are enabled with the embedded tests; the required
low-level functions from the dbus library are decorated with
DBUS_EMBEDDED_TESTS_EXPORT to indicate the appropriate usage.
On Windows, all tests are run; on unix-like operating systems,
individual tests are disabled:
- the tests on #NULL pointers of type DBus[C|R]Mutex, since they
point to a data structure and would cause a segment violation
when accessed.
- the multiple lock test for type DBusCMutex, since it would block
the current thread.
Since the whole point of "rmutex" is to be able to lock multiple
times, the "rmutex double lock" test is enabled on unix-like
operating systems too.
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Using PRId64, etc. to print dbus_int64_t or dbus_uint64_t is not 100%
portable. On platforms where both long and long long are 64-bit (such as
Linux and macOS), we will prefer to define dbus_int64_t as long.
If the operating system has chosen to define int64_t as long long,
which is apparently the case on macOS, then the compiler can warn that
we are passing a long argument to PRId64, which is "lld" and therefore
expects a long long argument (even though that ends up with the same
bit-pattern being used).
We can't necessarily just use int64_t and uint64_t directly, even if all
our supported platforms have them available now, because swapping
dbus_int64_t between long and long long might change C++ name mangling,
causing ABI breaks in third-party libraries if they define C++ functions
that take a dbus_int64_t argument.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Assertions can be disabled; but in test code the assertions are the
entire point, so we don't want to disable them. Use _dbus_test_fatal()
instead.
test-service is actually a test helper rather than a test, so use its
pre-existing die() function instead.
Signed-off-by: Simon McVittie <smcv@collabora.com>
These previously relied on embedding test-specific code in libdbus,
but they actually only need public APIs, private interfaces that get
exported anyway for the benefit of dbus-daemon, and the TAP helpers;
so we can run them even in production builds.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This doesn't verify that they're atomic, but does verify that they
return the right things.
This commit adds a new test function _dbus_test_check (a) to make
writing tests easier. It checks the given boolean expression and
generates a "not ok" test result if the expression is false.
Due to the current design of the test api, the test is only compiled
if embedded tests were enabled at the time of configuration.
It was also necessary to move the test_atomic target definitions in
test/Makefile.am to the --enable-embedded-tests section to avoid a
make distcheck build error.
The test case itself has been authored by smcv.
Co-authored-by: Simon McVittie <smcv@collabora.com>
Instead of exposing _dbus_sha_test() as a private exported symbol,
we can expose _dbus_sha_compute(), which is the only thing called by
the test that isn't already exported.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't actually complete successful authentication, because that
would require us to generate a cookie and compute the correct SHA1,
which is difficult to do in a deterministic authentication script.
However, we do assert that dbus#269 (CVE-2019-12749) has been fixed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This adds a few tests for checking if activation is allowed
for names specified within send_destination_prefix namespaces.
Signed-off-by: Adrian Szyndela <adrian.s@samsung.com>
Change-Id: I7a5a66f82fc08ce6cb46e37de2c3dfae24d9ea67
This adds tests for mostly "send_destination_prefix" cases
and some "send_destination" cases.
The general test case is:
- addressed recipient is running and owns a name;
- a message is sent to the name owner;
- the response is checked for allow/deny (method return/error).
Each test case is executed both for primary and queued ownership.
The tests include:
- checking send allow/deny for names and namespaces, including nesting;
- checking send allow/deny for neighbour names;
- checking send allow/deny for names/namespaces+interface+member.
Signed-off-by: Adrian Szyndela <adrian.s@samsung.com>
Change-Id: If5fcada01601355e7aadefadad79c0b24f8c397f
MSYS2 has enough of a Unixish environment to run Autotools, but
apparently not enough of a Unixish environment to have functional
permissions.
Closes: dbus#216
Traditional activation could be disabled if all services use
SystemdService activation instead. Provide an example of a hardened
DBus systemd service drop-in file for such a setup.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
We need to link the code coverage objects, directly or indirectly,
into every executable and every shared library. The rule I've followed
to make it clear that we do this, without too much repetition, is:
each executable, shared library or convenience library has
CODE_COVERAGE_LIBS in its LDADD or LIBADD, unless it is linked to a
convenience library in the same directory that has CODE_COVERAGE_LIBS
in *its* LIBADD.
Signed-off-by: Simon McVittie <smcv@collabora.com>
AX_CODE_COVERAGE recently changed the way it embedded its Makefile rules
in the output file: instead of using @CODE_COVERAGE_RULES@, users
are now meant to include aminclude_static.am.
The new AX_CODE_COVERAGE is only in the latest autoconf-archive release,
version 2019.01.06, which is inconveniently new, so bundle everything
we need for the moment.
This requires us to stop using the deprecated CODE_COVERAGE_LDFLAGS
(which we still used to support older versions of autoconf-archive)
and replace them with CODE_COVERAGE_LIBS.
Signed-off-by: Simon McVittie <smcv@collabora.com>
dbus-marshal-recursive-util.c contains utility functions used by the
other two, as well as tests. The others are purely test code.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This makes it easier for a developer to run just the fast parts while
debugging some issue reproduced by the faster tests.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Now that there is no code outside test/ that calls into this, we can
move it into test/, reducing the size of libdbus.
dbus-test-tap.[ch] still need to stay in dbus/ as long as there is
code in dbus/ or bus/ relying on them, and also need to be linked into
libdbus as long as there is other code in libdbus relying on them,
so they stay where they are for now. Similarly, dbus-tests.h lists
the tests that are still embedded in libdbus, and must stay where
it is for the moment.
With this move, various tests now need to be linked to the dbus-testutils
convenience library.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The -test suffix does not indicate that this is a test, but rather that
it is for tests (similar to the -unix and -win suffixes on modules like
dbus-sysdeps). This seems unnecessarily confusing, so rename it to end
with -for-tests.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This groups them with the rest of the tests, and enables parts of
the test code to be unembedded from libdbus and moved to test/ too.
Rename the executable to test-misc-internals, not test-dbus. The name
test-dbus made some sense as "the executable that contains the code in
dbus/", but makes a lot less sense in test/: dbus is the name of the
entire project, so this test has no particular special claim to that
name. test-libdbus doesn't seem right either, because all the tests
exercise libdbus one way or another.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This groups them with the other tests, and avoids having them influence
the test coverage stats in bus/.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This test is sufficiently well-separated that there's no real need
to embed it in libdbus. Move it into the test directory instead.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This means we don't need to distinguish between DBUS_NAME_TEST_EXEC and
DBUS_TEST_EXEC any more, because all test helper executables are in the
same place, both during build and when installed (we don't install
test-privserver since no installed test requires it yet, but in
principle we could).
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't want to set these globally via the normal CFLAGS, because if
we did, AddressSanitizer would catch test-segfault deliberately
segfaulting, and "helpfully" turn it into exit status 1, which in turn
makes our test fail because it asserts that the segfault is reported
as a segfault.
A typical use with gcc as compiler, on a reasonably recent Debian,
would be:
./configure SANITIZE_CFLAGS="-fsanitize=address -fsanitize=undefined -fPIE -pie"
Signed-off-by: Simon McVittie <smcv@collabora.com>
It's only used in test code. We have to put it in its own translation
unit with no non-libc dependencies so that we can compile a copy of it
without AddressSanitizer support, because in a subsequent commit we will
special-case test-segfault to be compiled without using AddressSanitizer,
which would make linking to an AddressSanitizer-instrumented libdbus fail.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Autotools creates executable applications in the respective
subdirectory of the build directory, while cmake creates
them in <build-root>/bin.
This leads to different paths in the file created
from org.freedesktop.DBus.TestSuite.PrivServer.service.in,
which are fixed by the new variable.
Bug: https://gitlab.freedesktop.org/dbus/dbus/issues/135
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Reviewed-by: Simon McVittie <smcv@collabora.com>
This simplifies bootstrapping: now you don't have to build dbus,
build dbus-python (with GLib), and use dbus-python to test dbus.
It also avoids test failures when using facilities like
AddressSanitizer. When libdbus is built with AddressSanitizer, but the
system copies of Python and dbus-python were not, dbus-python will exit
the Python interpreter on load, because libasan wasn't already
initialized. The simplest way to avoid this is to not use Python:
the scripts are not *that* hard to translate into C.
Both of these tests happen to be conditionally compiled for Unix only.
test_activation_forking() relies on code in TestSuiteForkingEchoService
that calls fork(), which can only work on Unix; meanwhile,
test_system_signals() tests the system bus configuration, which is
only relevant to Unix because we don't support using dbus-daemon as
a privilege boundary on Windows (and in any case D-Bus is not a Windows
OS feature, so the system bus cannot be used to communicate with OS
services like it can on most Linux systems).
This is also a partial solution to
<https://gitlab.freedesktop.org/dbus/dbus/issues/135>, by reducing the
size of name-test/.
For this to work, we need to build the test-service helper executable
even if embedded tests are disabled.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We might need these to run tests at build-time, so we should build them
whenever either modular or embedded tests are enabled, even if
installed-tests aren't.
We haven't noticed this bug until now because $(installable_helpers)
only contained test-apparmor-activation, which isn't normally needed at
build-time because the AppArmor test can only work when run as root.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Instead of the previous adaptation of the existing template
for the session bus, a separate template is now used, which
can be more easily adapted to the requirements of the test
applications.
Bug: https://gitlab.freedesktop.org/dbus/dbus/issues/57
minimal.conf is a valid config file added to make it obvious why
the new invalid config files are invalid.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107739
Based on code contributed by Manish Narang. This is not included in the
automated test suite, because it isn't reliable on heavily-loaded
automatic test infrastructure like Travis-CI.
Reviewed-by: Philip Withnall <withnall@endlessm.com>
[smcv: Add the test to the CMake build system too, as requested]
[smcv: Convert into a manual test]
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102839
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100317
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Simon McVittie <smcv@collabora.com>
