The ctest application is usually not installed in the dbus build
directory. If an older dbus library is contained in this path, it will
be used instead of the currently built one, which can lead to runtime
errors (e.g.: c0000139) if the internal dbus API differs.
Multi-configuration generators (VS, Xcode) append a per-configuration
subdirectory to the specified CMAKE_xxx_OUTPUT_DIRECTORY} directory.
To use the real output paths in test applications, this subdirectory
must be added to the corresponding cmake variables.
This patch introduces a new cmake macro add_session_test_executable,
which uses dbus-run-session to start a dbus-daemon process with a
temporary session bus in the background and the desired client file.
add_session_test_executable requires additional environment variables
defined in the top level CMakeLists.txt.
Bug: https://gitlab.freedesktop.org/dbus/dbus/issues/135
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
This patch introduces a new cmake macro add_session_test_executable,
which uses dbus-run-session to start a dbus-daemon process with a
temporary session bus in the background and the desired client file.
add_session_test_executable requires additional environment variables
defined in the top level CMakeLists.txt.
Bug: https://gitlab.freedesktop.org/dbus/dbus/issues/135
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Instead of the variables EXECUTABLE_OUTPUT_PATH and
LIBRARY_OUTPUT_PATH, which have become obsolete since
cmake 3.x, CMAKE_xxx_OUTPUT_PATH is now used to define
output paths in the build directory.
This all seems to have been written by Red Hat or by Collabora, so we
have permission to relicense it under the MIT/X11 license, and we
might as well do so.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This means we don't need to distinguish between DBUS_NAME_TEST_EXEC and
DBUS_TEST_EXEC any more, because all test helper executables are in the
same place, both during build and when installed (we don't install
test-privserver since no installed test requires it yet, but in
principle we could).
Signed-off-by: Simon McVittie <smcv@collabora.com>
It's only used in test code. We have to put it in its own translation
unit with no non-libc dependencies so that we can compile a copy of it
without AddressSanitizer support, because in a subsequent commit we will
special-case test-segfault to be compiled without using AddressSanitizer,
which would make linking to an AddressSanitizer-instrumented libdbus fail.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Autotools creates executable applications in the respective
subdirectory of the build directory, while cmake creates
them in <build-root>/bin.
This leads to different paths in the file created
from org.freedesktop.DBus.TestSuite.PrivServer.service.in,
which are fixed by the new variable.
Bug: https://gitlab.freedesktop.org/dbus/dbus/issues/135
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Reviewed-by: Simon McVittie <smcv@collabora.com>
If this variable is set, ctest uses wine to run cross compiled
test applications. Otherwise, they are assumed to run on a native
Windows operating system.
The new cmake variables Z_DRIVE_IF_WINE and TEST_WRAPPER have been
added to support this function.
The case occurred during test-pending-call-dispatch. To avoid further
applications being affected in the future, the manifest is added to
all test applications.
Windows Error 740 is defined as 'The Requested Operation Requires Elevation'
Using xsltproc helps to reduce manual editing of xml doc and avoids
cyclic dependency (kdelibs depends on dbus and dbus depends on kdelibs).
It is available on all platforms (in the opposite to xmlto) and supports
freedesktop CI out of the box.
This commit adds docbook-xml and docbook-xsl as new dependency for cmake
and removes obsolate xmlto support, which depends on xsltproc.
There is now a top-level target "doc" that is always built.
Depending on the detected generators it depends on optional
targets like apidoc' and 'devhelp2'.
va_copy() is a C99 feature, and should be widely supported by now.
gcc in strict C89 mode implements an equivalent __va_copy() instead.
MSVC 2013 implements va_copy(), but at the moment we still aim to support
MSVC 2010 and 2012, which don't have it. However, we know that in
Windows ABIs, va_list is a pointer, so we can use
_DBUS_VA_COPY_ASSIGN. We do not support MSVC for Autotools builds, only
CMake, due to its non-Unixish command-line interface.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We don't know that _DBUS_VA_COPY_ASSIGN is always the right choice.
However, we do know that it's OK on MSVC versions too old to support
va_copy().
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we already have ISO C va_copy() or its non-standard counterpart
__va_copy(), then there's no need to do an AC_RUN_IFELSE or its
CMake equivalent to detect whether "args2 = args1" or "*args2 = *args1"
works. AC_RUN_IFELSE is problematic during cross-compilation, where the
program cannot be run (you have to know in advance that the test program
will be run and what its result will be), so we want to avoid it whenever
possible.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We have considerable anecdotal evidence that every relevant compiler
supports at least the small part of ISO varargs syntax that we need
here, because tools/tool-common.h has contained
#define VERBOSE(...) do {} while (0)
since dbus 1.9.2 (2014) and nobody has complained yet. With that in
mind, let's simplify.
Signed-off-by: Simon McVittie <smcv@collabora.com>
For test case execution, CheckCSourceCompiles is now used instead
of try_compile and the determination of DBUS_VA_AS_ARRAY is
performed with a separate test instead of evaluating the result
of HAVE_VA_COPY and HAVE___VA_COPY.
The tests are performed for all supported compilers. Since older
MSVC compilers (< 2013) do not support va_copy(), the macro
_DBUS_VA_ASSIGN(a1,a2) with the implementation { a1 = a2; } is used
as a fallback.
If in a .pc variable a path is created from another
variable, such as exec_prefix=${prefix}/lib, prefix
must not contain a trailing slash to avoid double
slashes in the generated path.
Instead of hard-coding the lib subdirectory of the installation prefix,
use the ${CMAKE_INSTALL_LIBEXECDIR} provided by the GNUInstallDirs
module, which defaults to the libexec subdirectory of the installation
prefix. This is consistent with the Autotools build system, which
installs to ${exec_prefix}/libexec unless modified with --libexecdir.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Since the cmake build system is located below the cmake/
subdirectory, references to the source files used such as
../../bus or ${CMAKE_SOURCE_DIR}/../dbus etc. are required.
To standardize and simplify this, a cmake variable is now
defined in each of the listed directories, which contains
the corresponding path.
For test case execution, CheckCSourceCompiles is now used instead
of try_compile and the determination of DBUS_VA_AS_ARRAY is
performed with a separate test instead of evaluating the result
of HAVE_VA_COPY and HAVE___VA_COPY.
The tests are performed for all supported compilers. Since older
MSVC compilers (< 2013) do not support va_copy(), the macro
_DBUS_VA_ASSIGN(a1,a2) with the implementation { a1 = a2; } is used
as a fallback.
Reviewed-by: Simon McVittie <smcv@collabora.com>
Bug: https://gitlab.freedesktop.org/dbus/dbus/merge_requests/18
CMake expects a semicolon-separated list of headers, not a
space-separated list. In particular, this meant we failed to detect
getpwnam_r() on Linux, and fell back to getpwnam().
Reviewed-by: Simon McVittie <smcv@collabora.com>
