* dbus/dbus-object-tree.c: modify to allow overlapping paths to be
registered
(struct DBusObjectSubtree): shrink this
a lot, since we may have a lot of them
(_dbus_object_tree_free_all_unlocked): implement
(_dbus_object_tree_dispatch_and_unlock): implement
purge DBusObjectID
* dbus/dbus-connection.c: port to no ObjectID, create a
DBusObjectTree, rename ObjectTree to ObjectPath in public API
* dbus/dbus-connection.h (struct DBusObjectTreeVTable): delete
everything except UnregisterFunction and MessageFunction
* dbus/dbus-marshal.c: port away from DBusObjectID,
add DBUS_TYPE_OBJECT_PATH
* dbus/dbus-object-registry.[hc], dbus/dbus-object.[hc],
dbus/dbus-objectid.[hc]: remove these, we are moving to
path-based object IDs
Just noticed that dbus_message_test is hosed, I wonder when I
broke that. I thought make check was passing earlier...
* dbus/dbus-object-tree.c: add new "object tree" to match DCOP
container tree, will replace most of dbus-object-registry
* dbus/dbus-string.c (_dbus_string_append_printf_valist): fix C99
screwup
* dbus/dbus-message.c (decode_string_field): support FIELD_SENDER
(dbus_message_is_error): fix this function
* bus/dbus-daemon-1.1: clarify logic on when <deny>/<allow> rules
match
* bus/policy.c (bus_client_policy_check_can_receive): fix code to
reflect clarified man page
(bus_client_policy_check_can_send): ditto
* bus/session.conf.in: fixup
* bus/system.conf.in: fixup
* dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix
* dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix
dumb bug created earlier (wrong order of args to
decode_header_data())
* tools/dbus-send.c: port
* tools/dbus-print-message.c (print_message): port
* test/data/*messages: port all messages over
* dbus/dbus-message-builder.c: support including
message type
* bus/driver.c: port over
* bus/dispatch.c: port over to new stuff
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
rename disconnect signal to "Disconnected"
This doesn't compile yet, but syncing up so I can hack on it from
work. What are branches for if not broken code? ;-)
* dbus/dbus-protocol.h: remove DBUS_HEADER_FIELD_NAME, add
DBUS_HEADER_FIELD_INTERFACE, DBUS_HEADER_FIELD_MEMBER,
DBUS_HEADER_FIELD_ERROR_NAME
* dbus/dbus-hash.c: Introduce DBUS_HASH_TWO_STRINGS as hack to use
for the interface+member pairs
(string_hash): change to use g_str_hash algorithm
(find_direct_function, find_string_function): refactor these to
share most code.
* dbus/dbus-message.c: port all of this over to support
interface/member fields instead of name field
* dbus/dbus-object-registry.c: port over
* dbus/dbus-string.c (_dbus_string_validate_interface): rename
from _dbus_string_validate_name
* bus/dbus-daemon-1.1: change file format for the
<deny>/<allow> stuff to match new message naming scheme
* bus/policy.c: port over
* bus/config-parser.c: parse new format
* dbus/dbus-pending-call.c (dbus_pending_call_block): implement
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): factor out internals;
change to convert any error replies to DBusError instead of
returning them as a message
* dbus/dbus-pending-call.c: start on new object that will replace
DBusMessageHandler and ReplyHandlerData for tracking outstanding
replies
* dbus/dbus-gproxy.c: start on proxy object used to communicate
with remote interfaces
* dbus/dbus-gidl.c: do the boring boilerplate in here
* bus/dispatch.c (bus_dispatch): make this return proper
DBusHandlerResult to avoid DBUS_ERROR_UNKNOWN_METHOD
* dbus/dbus-errors.c (dbus_set_error): use
_dbus_string_append_printf_valist
* dbus/dbus-string.c (_dbus_string_append_printf_valist)
(_dbus_string_append_printf): new
* dbus/dbus-errors.h (DBUS_ERROR_UNKNOWN_MESSAGE): change to
UNKNOWN_METHOD
* dbus/dbus-connection.c (dbus_connection_dispatch): handle
DBUS_HANDLER_RESULT_NEED_MEMORY; send default error reply if a
message is unhandled.
* bus/test.c (client_disconnect_handler): change to return
HANDLED (would have been REMOVE_MESSAGE)
* dbus/dbus-object.h (enum DBusHandlerResult): rename to
HANDLED/NOT_YET_HANDLED instead of
REMOVE_MESSAGE/ALLOW_MORE_HANDLERS to make it clearer how it
should be used.
* tools/dbus-send.c (main): add --type argument, for now
supporting only method_call and signal types.
* tools/dbus-print-message.c: print message type
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
init connection->objects
* doc/dbus-specification.sgml: fix sgml
* bus/*.c: port over to object-instance API changes
* test/test-service.c: ditto
* dbus/dbus-message.c (dbus_message_create_header): allow #NULL
name, we will have to fix up the rest of the code to also handle
this
(dbus_message_new): generic message-creation call
(set_string_field): allow appending name field
* dbus/dbus-object-registry.c: implement signal connection
and dispatch
* dbus/dbus-connection.c (_dbus_connection_unref_unlocked): new
* dbus/dbus-internals.c (_dbus_memdup): new function
* dbus/dbus-message.c (dbus_message_get_no_reply)
(dbus_message_set_no_reply): add these and remove
set_is_error/get_is_error
* dbus/dbus-protocol.h, doc/dbus-specification.sgml:
remove the ERROR flag, since there's now an ERROR type
* dbus/dbus-protocol.h (DBUS_MESSAGE_TYPE_*): introduce
a message type enum to distinguish kinds of message
(DBUS_HEADER_FLAG_NO_REPLY_EXPECTED): flag for a message
that need not be replied to
2003-08-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.c: adapt to DBusObjectID changes
(unpack_8_octets): fix no-64-bit-int bug
* dbus/dbus-object-registry.c (validate_id): validate the
connection ID bits, not just the instance ID.
* dbus/dbus-connection.c (_dbus_connection_init_id): initialize
the connection-global 33 bits of the object ID
* dbus/dbus-object-registry.c (info_from_entry): fill in
object ID in the new way
* dbus/dbus-objectid.h: rather than high/low bits, specifically
define server/client/instance bits.
* tools/dbus-launch.c (babysit): close stdout/stderr in the
babysitter process, as suggested by Thomas Leonard, so
an "eval `dbus-launch --exit-with-session`" will actually
return
* configure.in: print out EXPANDED_* variables in the summary at
the end; clean up the code that computes EXPANDED_ variables and
get the ones using exec_prefix right. Should make things work
when you build without --prefix
* dbus/dbus-object-registry.c: implement unit test,
fix bugs discovered in process
* dbus/dbus-connection.c: remove handler_table and
register_handler(), add DBusObjectRegistry usage
* dbus/dbus-objectid.c (dbus_object_id_is_null)
(dbus_object_id_set_null): new functions
* dbus/dbus-object.c: implement some of this
* dbus/dbus-object-registry.c
(_dbus_object_registry_add_and_unlock): fill in the object_id out
param
(_dbus_object_registry_new): handle OOM
* dbus/dbus-object.h: sketch out an API for registering objects
with a connection, that allows us to use as little as 24 bytes
per object and lets application code represent an object in
any conceivable way.
* dbus/dbus-object-registry.c: implement the hard bits of the
DBusConnection aspect of object API. Not yet wired up.
* dbus/dbus-marshal.c (_dbus_marshal_set_object_id): new function
(_dbus_marshal_object_id): new
(_dbus_demarshal_object_id): new
(_dbus_marshal_get_arg_end_pos): support object ID type, and
consolidate identical switch cases. Don't conditionalize handling
of DBUS_TYPE_UINT64, need to handle the type always.
(_dbus_marshal_validate_arg): consolidate identical cases, and
handle DBUS_TYPE_OBJECT_ID
* dbus/dbus-objectid.c: new file with DBusObjectID data type.
* dbus/dbus-protocol.h: add DBUS_TYPE_OBJECT_ID
* mono/Test.cs (class Test): fire up a main loop and run it
* mono/DBus.cs (DBus): don't g_thread_init since it can only be
done once, the app has to do it
2003-06-26 Havoc Pennington <hp@pobox.com>
* mono/Connection.cs: set up connection with the glib main loop
* dbus/dbus-mainloop.c (_dbus_loop_remove_watch)
(_dbus_loop_remove_timeout): Cast function pointers to (void *) for %p
* configure.in: Add -D_POSIX_C_SOURCE=199309L -DBSD_SOURCE to CFLAGS
and disable DBUS_USE_ATOMIC_INT_486 when --enable-ansi is used
* mono/Message.cs: implement Message.Wrap() that ensures we only
have a single C# wrapper per DBusMessage, assuming it works which
it probably doesn't.
* dbus/dbus-message.c (dbus_message_allocate_data_slot): new
(dbus_message_free_data_slot): new
(dbus_message_set_data): new
(dbus_message_get_data): new
* dbus/dbus-dataslot.c (_dbus_data_slot_allocator_unref)
(_dbus_data_slot_allocator_alloc): rework these to keep a
reference count on each slot and automatically manage a global
slot ID variable passed in by address
* bus/bus.c: convert to new dataslot API
* dbus/dbus-bus.c: convert to new dataslot API
* dbus/dbus-connection.c: convert to new dataslot API
* dbus/dbus-server.c: convert to new dataslot API
* glib/dbus-gmain.c: ditto
* bus/test.c: ditto
* bus/connection.c: ditto
