hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
* bus/connection.c (bus_pending_reply_expired): either cancel or
execute, not both
(bus_connections_check_reply): use unlink, not remove_link, as we
don't want to free the link; fixes double free mess
* dbus/dbus-pending-call.c (dbus_pending_call_block): fix in case
where no reply was received
* dbus/dbus-connection.c (_dbus_pending_call_complete_and_unlock):
fix a refcount leak
* bus/signals.c (match_rule_matches): add special cases for the
bus driver, so you can match on sender/destination for it.
* dbus/dbus-sysdeps.c (_dbus_abort): print backtrace if
DBUS_PRINT_BACKTRACE is set
* dbus/dbus-internals.c: add pid to assertion failure messages
* dbus/dbus-connection.c: add message type code to the debug spew
* glib/dbus-gproxy.c (gproxy_get_match_rule): match rules want
sender=foo not service=foo
* dbus/dbus-bus.c (dbus_bus_get): if the activation bus is the
session bus but DBUS_SESSION_BUS_ADDRESS isn't set, use
DBUS_ACTIVATION_ADDRESS instead
* bus/activation.c: set DBUS_SESSION_BUS_ADDRESS,
DBUS_SYSTEM_BUS_ADDRESS if appropriate
* bus/bus.c (bus_context_new): handle OOM copying bus type into
context struct
* dbus/dbus-message.c (dbus_message_iter_get_object_path): new function
(dbus_message_iter_get_object_path_array): new function (half
finished, disabled for the moment)
* glib/dbus-gproxy.c (dbus_gproxy_end_call): properly handle
DBUS_MESSAGE_TYPE_ERROR
* tools/dbus-launch.c (babysit): support DBUS_DEBUG_OUTPUT to
avoid redirecting stderr to /dev/null
(babysit): close stdin if not doing the "exit_with_session" thing
* dbus/dbus-sysdeps.c (_dbus_become_daemon): delete some leftover
debug code; change DBUS_DEBUG_OUTPUT to only enable stderr, not
stdout/stdin, so things don't get confused
* bus/system.conf.in: fix to allow replies, I modified .conf
instead of .conf.in again.
Added test code that 1) starts an actual bus daemon and 2) uses
DBusGProxy; fixed bugs that were revealed by the test. Lots
more testing possible, but this is the basic framework.
* glib/dbus-gproxy.c (dbus_gproxy_manager_unregister): remove
empty proxy lists from the proxy list hash
* dbus/dbus-message.c (dbus_message_iter_get_args_valist): add a
couple of return_if_fail checks
* dbus/dbus-pending-call.c (_dbus_pending_call_new): use dbus_new0
to allocate, so everything is cleared to NULL as it should be.
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main): pass
source as data to dbus_connection_set_timeout_functions() as the
timeout functions expected
* test/glib/run-test.sh: add a little script to start up a message
bus and run tests using it
* tools/dbus-launch.1: updates
* tools/dbus-launch.c (main): add --config-file option
* tools/dbus-launch.c (main): remove confusing else if (runprog)
that could never be reached.
* dbus/dbus-message.c (dbus_message_new_method_return)
(dbus_message_new_error, dbus_message_new_signal): set the
no-reply-expected flag on all these. Redundant, but may
as well be consistent.
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): rename from
dbus_gproxy_oneway_call
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main)
(dbus_server_setup_with_g_main): fix to allow calling them more
than once on the same args
(dbus_bus_get_with_g_main): new function
* glib/dbus-gproxy.c (struct DBusGProxy): convert to a GObject
subclass. This means dropping the transparent thread safety of the
proxy; you now need a separate proxy per-thread, or your own
locking on the proxy. Probably right anyway.
(dbus_gproxy_ref, dbus_gproxy_unref): nuke, just use g_object_ref
* glib/dbus-gproxy.c (dbus_gproxy_manager_new): start
implementing the proxy manager, didn't get very far.
* dbus/dbus-bus.c (dbus_bus_add_match): new
(dbus_bus_remove_match): new
* glib/dbus-gproxy.c (dbus_gproxy_new_for_service): add a
path_name argument; adjust the other not-yet-implemented
gproxy constructors to be what I think they should be.
Get matching rules mostly working in the bus; only actually
parsing the rule text remains. However, the client side of
"signal connections" hasn't been started, this patch is only the
bus side.
* dbus/dispatch.c: fix for the matching rules changes
* bus/driver.c (bus_driver_handle_remove_match)
(bus_driver_handle_add_match): send an ack reply from these
method calls
* glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of
arguments, reported by Seth Nickell
* bus/config-parser.c (append_rule_from_element): support
eavesdrop=true|false attribute on policies so match rules
can be prevented from snooping on the system bus.
* bus/dbus-daemon-1.1.in: consistently use terminology "sender"
and "destination" in attribute names; fix some docs bugs;
add eavesdrop=true|false attribute
* bus/driver.c (bus_driver_handle_add_match)
(bus_driver_handle_remove_match): handle AddMatch, RemoveMatch
messages
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get
rid of broadcast service concept, signals are just always broadcast
* bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c:
mostly implement matching rules stuff (currently only exposed as signal
connections)
* dbus/dbus-pending-call.c: add the get/set object data
boilerplate as for DBusConnection, etc. Use generic object data
for the notify callback.
* glib/dbus-gparser.c (parse_node): parse child nodes
* tools/dbus-viewer.c: more hacking on the dbus-viewer
* glib/dbus-gutils.c (_dbus_gutils_split_path): add a file to
contain functions shared between the convenience lib and the
installed lib
* glib/Makefile.am (libdbus_glib_1_la_LDFLAGS): add
-export-symbols-regex to the GLib library
* dbus/dbus-object-tree.c (_dbus_object_tree_dispatch_and_unlock):
fix the locking in here, and add a default handler for
Introspect() that just returns sub-nodes.
2003-09-14 Havoc Pennington <hp@pobox.com>
* glib/dbus-gthread.c (dbus_g_thread_init): rename to make g_foo
rather than gfoo consistent
* glib/dbus-gproxy.h: delete for now, move contents to
dbus-glib.h, because the include files don't work right since we
aren't in the dbus/ subdir.
* glib/dbus-gproxy.c (dbus_gproxy_send): finish implementing
(dbus_gproxy_end_call): finish
(dbus_gproxy_begin_call): finish
* glib/dbus-gmain.c (dbus_set_g_error): new
* glib/dbus-gobject.c (handle_introspect): include information
about child nodes in the introspection
* dbus/dbus-connection.c (dbus_connection_list_registered): new
function to help in implementation of introspection
* dbus/dbus-object-tree.c
(_dbus_object_tree_list_registered_and_unlock): new function
2003-09-12 Havoc Pennington <hp@pobox.com>
* glib/dbus-gidl.h: add common base class for all the foo_info
types
* tools/dbus-viewer.c: add GTK-based introspection UI thingy
similar to kdcop
* test/Makefile.am: try test srcdir -ef . in addition to test
srcdir = ., one of them should work (yeah lame)
* glib/Makefile.am: build the "idl" parser stuff as a convenience
library
* glib/dbus-gparser.h: make description_load routines return
NodeInfo* not Parser*
* Makefile.am (SUBDIRS): build test dir after all library dirs
* configure.in: add GTK+ detection
purge DBusObjectID
* dbus/dbus-connection.c: port to no ObjectID, create a
DBusObjectTree, rename ObjectTree to ObjectPath in public API
* dbus/dbus-connection.h (struct DBusObjectTreeVTable): delete
everything except UnregisterFunction and MessageFunction
* dbus/dbus-marshal.c: port away from DBusObjectID,
add DBUS_TYPE_OBJECT_PATH
* dbus/dbus-object-registry.[hc], dbus/dbus-object.[hc],
dbus/dbus-objectid.[hc]: remove these, we are moving to
path-based object IDs
* dbus/dbus-pending-call.c: start on new object that will replace
DBusMessageHandler and ReplyHandlerData for tracking outstanding
replies
* dbus/dbus-gproxy.c: start on proxy object used to communicate
with remote interfaces
* dbus/dbus-gidl.c: do the boring boilerplate in here
