In Unix, the tests listened on both debug-pipe (which is a socketpair,
or a TCP emulation of socketpair on Windows) and a Unix socket.
In the Windows port, the tests were hard-coded to listen on a particular
port, which allowed the dispatch test to connect to that port, as long
as no two tests ran simultaneously (which I don't think was ever guaranteed -
make -j can violate this). That's valid out-of-process, and also
fully-specified, so they only needed one <listen> directive, so the
CMake input only had one.
To make the tests work under CMake on Unix, there was a hack: the string
substituted for the content of the <listen> directive contained
</listen><listen> to get the other address in, which is pretty nasty.
Instead of doing that, I've made both build systems, on both Unix and
Windows, use both debug-pipe and a more normal transport (Unix or TCP).
debug-pipe has a Windows implementation and it's used in
dbus-spawn-win.c, so it'd better work. The use of debug-pipe is now
hard-coded rather than being a configure parameter (there's no reason
to vary it in different builds), and I used TEST_LISTEN as the name of the
Unix/TCP address, because it's a "vague" address (no specific Unix path, no
TCP port), that you can listen on but not connect to.
This in turn means that we can merge the Autoconf .in and CMake .cmake
files, similar to Bug #41033.
You might wonder why I've kept debug-pipe. I did try to get rid of it, but
it turns out that the tests in dispatch.c rely on
dbus_connection_open_private() not blocking, and normal socket
connections block on connect(). Until we fix that by adding an async
version of dbus_connection_open_private(), it won't be safe to have a
test like dispatch.c that "talks to itself", unless it uses a transport
as trivial as debug-pipe in which neither end has to block on the other.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=41222
Also use EXEEXT in all the service files, even in the automake build
system.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=41222
The number of messages is arbitrary; the more messages, the more likely
the crash is. 2000 messages seem to cause it reliably on this laptop,
but I've set it to 10000 to be safe.
Reviewed-by: Colin Walters <walters@verbum.org>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=34393
The excellently-titled commit 197bef8 “Fix test failures on OSX.” broke
the tests on Linux, since there's no wheel group on this side of the
tracks. So here's a group everyone should enjoy.
(If anyone comes along and tells me that DragonflyBSD doesn't have
'nogroup' …)
Recent test configuration files contains 'unix:...'
bus adresses which do not work on windows.
For cross plattform usable test files the whole
listen tag entry has to be set by the build system,
which is available with a new build system variable
named TEST_LISTEN.
To have the client client side definition in sync,
TEST_CONNECTION has been moved from c file into cmake
build system.
A variety of system components have migrated from legacy init into DBus
service activation. Many of these system components "daemonize", which
involves forking. The DBus activation system treated an exit as an
activation failure, assuming that the child process which grabbed the
DBus name didn't run first.
While we're in here, also differentiate in this code path between the
servicehelper (system) versus direct activation (session) paths. In
the session activation path our error message mentioned a helper
process which was confusing, since none was involved.
Based on a patch and debugging research from Ray Strode <rstrode@redhat.com>
* test/data/valid-service-files/org.freedesktop.DBus.TestSuite.PrivServer.service.in:
New service file for PrivServer.
* configure.in: Generate it.
* test/name-test/Makefile.am: Build test-privserver and
test-privserver-client.
* test/name-test/test-privserver.c: Use DBusServer to
serve a private connection.
* test/name-test/test-privserver-client.c: Connect
via session bus and get address of private server,
exercise dbus_shutdown().
* test/name-test/run-test.sh: Run it.
2007-09-13 Ryan Lortie <desrt@desrt.ca>
migrate from cvs to git (cvs2svn -> git-svnimport).
* HACKING: update release/branch/tag instructions
* */.cvsignore: rename to .gitignore
also, clean up tags and branch names to conform to HACKING
* dbus/dbus-string.c (_dbus_string_pop_line): fix this not to
think an empty line is the end of the file.
Also, fix some whitespace.
* dbus/dbus-string-util.c: add more tests for
_dbus_string_pop_line() revealing that it thinks an empty line is
the end of the file, which broke dbus-auth-script.c so
it didn't really run the scripts
* dbus/dbus-auth.c: add ANONYMOUS mechanism
* dbus/dbus-auth-script.c (_dbus_auth_script_run): fix to detect
an empty/no-op auth script; add commands to check that we have or
don't have the expected credentials
* bus/config-parser.c: add the standard_session_servicedirs element
to the parser
(bus_config_parser_content): process the standard_session_servicedirs
element by getting the standard directories from sysdeps and merging
them into the service directory list
(test_default_session_servicedirs): make sure we get what we expect
* bus/session.conf.in: replace the servicedir tag with the
standard_session_servicedirs tag
* dbus/dbus-list.h: remove the typedef of DBusList and place it in
dbus-sysdeps.h to avoid circular header dependencies
* dbus/dbus-sysdeps.h: add the typedef of DBusList
* dbus/dbus-sysdeps-unix.c (split_paths_and_append): utility function
which takes a string of directories delimited by colons, parses them
out, appends a suffix and puts them in a list ignoring empty elements
(_dbus_get_standard_session_servicedirs): returns the standard
directories for a session bus to look for service activation files
on Unix which includes the XDG_DATA_HOME, XDG_DATA_DIRS and
DBUS_DATADIR directories
* test/data/valid-config-files/many-rules.conf: add the
standard_session_servicedirs tag to the valid config file tests
* python/dbus_bindings.pyx (String, MessageIter): make D-Bus strings
derive from unicode instead of str, and encode/decode UTF-8 when
marshalling/unmarshalling bus messages
* python/introspect_parser.py: encode introspection data as UTF-8
before passing the buffer into libxml2
* test/python/test-client.py: add unicode test strings
* test/data/valid-service-files/.cvsignore, test/python/.cvsignore:
ignore generated python test files
* test/data/auth/fallback.auth-script: we don't
retry the EXTERNAL method when we know its going
to fail anymore.
2005-09-11 Mark McLoughlin <mark@skynet.ie>
* dbus/dbus-connection-internal.h: rename
(add|remove|toggle)_(watch|timeout) to unlocked()
* dbus/dbus-connection.c: ditto.
* dbus/dbus-timeout.c, dbus/dbus-transport-unix.c:
Update some callers for the renaming.
2005-09-10 Mark McLoughlin <mark@skynet.ie>
* dbus/dbus-auth.c: (record_mechanisms): don't
retry the first auth mechanism because we know
we're just going to get rejected again.
* dbus/dbus-keyring.c: (_dbus_keyring_reload):
Fix thinko ... and what a nasty little bugger to
track down you were ...
* dbus/dbus-connection.c:
(_dbus_connection_add_watch),
(_dbus_connection_remove_watch): add note about
these needing the connection to be locked.
(_dbus_connection_get_dispatch_status_unlocked):
set status to DATA_REMAINS when we queue the
disconnected message.
* bus/dispatch.c:
(bus_dispatch): fix warning.
(check_existent_service_no_auto_start):
Expect ChildSignaled error too.
(check_existent_hello_from_self): fix another
couple of warnings.
2005-07-14 John (J5) Palmieri <johnp@redhat.com>
* bus/activation.c: clean up all tabs to be 8 spaces
(bus_activation_activate_service): make sure we clean up
if activation fails
* bus/dispatch.c: clean up all tabs to be 8 spaces
(check_shell_fail_service_auto_start): New function
tests to make sure we get fail properly when trying to auto start a service
with a faulty command line
(check_shell_service_success_auto_start): New function tests to make sure
auto started services get the arguments on the command line
* test/test-shell-service.c: Added service for testing auto-starting with
command line arguments
* test/data/valid-service-files/debug-shell-echo-fail.service.in,
test/data/valid-service-files/debug-shell-echo-success.service.in:
Added service files for testing auto-starting with command line arguments
* */.cvsignore: added a bunch of generated files to various .cvsignore files
2005-07-14 Rodrigo Moya <rodrigo@novell.com>
* dbus/dbus-shell.[ch]: copy/pasted code from GLib.
* dbus/Makefile.am: added new files to build.
* bus/activation.c (bus_activation_activate_service): support
activation commands with parameters.
* test/shell-test.c: added test program for the shell parsing
code.
* configure.in (LT_*): add notes on how the libtool versioning
works to save thinking. Increment soname to indicate protocol
breakage (though really the library interface hasn't changed I
guess)
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated):
verify the GUID received from server matches what we were
expecting, if we had an expectation
* dbus/dbus-auth.c (send_ok): send GUID along with the OK command
(_dbus_auth_get_guid_from_server): new function
(send_begin): parse the OK args
* doc/dbus-specification.xml: add GUID to the auth protocol
* glib/Makefile.am: Generate dbus-glib-bindings.h and
install it.
* bus/print-introspect.c: New file; prints introspection
data for a given name and object path.
* bus/run-with-tmp-session-bus.sh: New file, refactored
from test/glib/run-test.sh. Creates a temporary session
bus and runs another program.
* test/glib/run-test.sh: Refactor to invoke
run-with-tmp-session-bus.sh.
* bus/driver.c (bus_driver_handle_introspect): Fix to print new
introspection format. Also change to use DBUS_TYPE_x_AS_STRING
macros instead of hardcoding.
* glib/.cvsignore, bus/.cvsignore, test/glib/.cvsignore: Update.
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_DBUS):
Rename to DBUS_SERVICE_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_DBUS): Rename to DBUS_PATH_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_LOCAL): Rename to DBUS_PATH_LOCAL.
(DBUS_INTERFACE_ORG_FREEDESKTOP_DBUS): Rename to DBUS_INTERFACE_DBUS.
(DBUS_INTERFACE_ORG_FREEDESKTOP_INTROSPECTABLE): Rename to
DBUS_INTERFACE_INTROSPECTABLE.
(DBUS_INTERFACE_ORG_FREEDESKTOP_PROPERTIES): Rename to
DBUS_INTERFACE_PROPERTIES.
(DBUS_INTERFACE_ORG_FREEDESKTOP_PEER): Rename to
DBUS_INTERFACE_PEER.
(DBUS_INTERFACE_ORG_FREEDESKTOP_LOCAL):
DBUS_INTERFACE_LOCAL.
All other users of those constants have been changed.
* bus/driver.c (bus_driver_handle_introspect): Use constants.
* glib/dbus-gobject.c (handle_introspect): Use constants.
* doc/dbus-faq.xml, doc/dbus-specification.xml: Update for rename.
* Throughout, grand renaming to strip out the use of "service",
just say "name" instead (or "bus name" when ambiguous). Did not
change the internal code of the message bus itself, only the
programmer-facing API and messages.
* doc/dbus-specification.xml: further update the message bus section
* bus/config-parser.c (all_are_equiv): fix bug using freed string
in error case
* bus/selinux.h: Add bus_selinux_enabled.
* bus/selinux.c (bus_selinux_enabled): Implement it.
* bus/config-parser.c (struct include): Add
if_selinux_enabled member.
(start_busconfig_child): Parse if_selinux_enabled
attribute for include.
(bus_config_parser_content): Handle it.
* bus/session.conf.in, bus/system.conf.in: Add
inclusion of context mapping to default config files;
conditional on SELinux being enabled.
* doc/busconfig.dtd: Add to if_selinux_enabled to default DTD.
* test/data/invalid-config-files/badselinux-1.conf,
test/data/invalid-config-files/badselinux-2.conf:
Test files for bad syntax.
* bus/dbus-daemon-1.1.in:
* test/data/valid-config-files/many-rules.conf: set the
max_match_rules_per_connection limt from the config file.
* doc/busconfig.dtd: update the DTD.
* bus/driver.c: remove some unused variables.
SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/selinux.c, bus/selinux.h: new file encapsulating selinux
functionality
* configure.in: add --enable-selinux
* bus/policy.c (bus_policy_merge): add FIXME to a comment
* bus/main.c (main): initialize and shut down selinux
* bus/connection.c: store SELinux ID on each connection, to avoid
repeated getting of the string context and converting it into
an ID
* bus/bus.c (bus_context_get_policy): new accessor, though it
isn't used
(bus_context_check_security_policy): check whether the security
context of sender connection can send to the security context of
recipient connection
* bus/config-parser.c: add parsing for <selinux> and <associate>
* dbus/dbus-transport.c (_dbus_transport_get_unix_fd): to
implement dbus_connection_get_unix_fd()
* dbus/dbus-connection.c (dbus_connection_get_unix_fd): new
function, used by the selinux stuff
backend for config file loader. Doesn't work with full OOM test yet.
* configure.in: change error when selecting libxml into a warning.
* test/data/invalid-config-files: add two non-well-formed XML files.
* glib/Makefile.am: libdbus_gtool always uses expat, not libxml.
* dbus/dbus-transport-unix.c (unix_handle_watch): do not disconnect in
case of DBUS_WATCH_HANGUP, several do_reading() may be necessary to
read all the buffer. (bug #894)
* bus/activation.c (bus_activation_activate_service): fix a potential
assertion failure (bug #896). Small optimization in the case of
auto-activation messages.
* dbus/dbus-message.c (verify_test_message, _dbus_message_test): add
test case for byte-through-vararg bug (#901). patch by Kimmo
Hämäläinen.
* dbus/dbus-message-builder.c (_dbus_message_data_load): append
random signature when using REQUIRED_FIELDS (this hack won't work
in the long term)
* dbus/dbus-message.c: change the signature to be a header field,
instead of message->signature special-case string. Incremental
step forward. Then we can fix up code to send the signature in the
message, then fix up code to validate said signature, then fix up
code to not put the typecodes inline, etc.
(load_one_message): don't make up the signature after the fact
(decode_header_data): require signature field for the known
message types
* dbus/dbus-marshal.c (_dbus_marshal_string_len): new
* dbus/dbus-protocol.h: add DBUS_HEADER_FIELD_SIGNATURE
* dbus/dbus-auth.c: Rewrite auth protocol handling to use a state
machine approach. A state is implemented as a function that
handles incoming events as specified for that state.
* doc/dbus-specification.xml: Update auth protocol state machine
specification to match implementation. Remove some leftover
base64 examples.
* glib/dbus-gidl.c (method_info_add_arg): keep args sorted with
"in" before "out"
* glib/dbus-gobject.c (dbus_type_to_string): move to dbus-gutils.c
* glib/dbus-glib-tool.c (main): set up to have a --self-test
option that runs the tests, and start filling in some code
including for starters just dumping the interfaces to stdout
* glib/Makefile.am (INCLUDES): define DBUS_LOCALEDIR
* test/data/valid-introspection-files/lots-of-types.xml: test of
an example introspection file
* glib/dbus-gparser.c (parser_check_doctype): doctype should be
"node" (I think...)
filter against auth->allowed_mechs; we only add allowed mechs in
record_mechanisms().
* dbus/dbus-auth-script.c (_dbus_auth_script_run): Add an
ALLOWED_MECHS to auth-script format so we can set the list of
allowed mechanisms.
* data/auth/client-out-of-mechanisms.auth-script: New test to
check client disconnects when it is out of mechanisms to try.
* dbus/dbus-auth.c (process_command): Remove check for lines
longer that 1 MB; we only buffer up maximum 16 kB.
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth-script.c, dbus/dbus-auth.c, dbus/dbus-auth.h:
Remove auth state AUTHENTICATED_WITH_UNUSED_BYTES, instead always
assume there might be unused bytes.
* dbus/dbus-auth.c (_dbus_auth_do_work): Remove check for
client-out-of-mechs, it is handled in process_reject(). Move check
for max failures to send_rejected(), as it's a server-only thing.
Remove base64 encoding, replace with hex encoding. Original patch
from trow@ximian.com, added error handling.
* dbus/dbus-string.c (_dbus_string_base64_encode)
(_dbus_string_base64_decode): Remove.
(_dbus_string_hex_decode): Add end_return argument so we can
distinguish between OOM and invalid hex encoding.
(_dbus_string_test): Remove base64 tests and add test case for
invalid hex.
* dbus/dbus-keyring.c, dbus/dbus-auth-script.c, dbus/dbus-auth.c:
Replace base64 with hex.
* test/data/auth/invalid-hex-encoding.auth-script: New test case
for invalid hex encoded data in auth protocol.
* bus/config-parser.c (struct BusConfigParser): Added
included_files field.
(seen_include): Added. Checks whether or not a file has already
been included by any parent BusConfigParser.
(bus_config_parser_new): Copy the parent's included_files.
(include_file): Track which files have been included, and fail on
circular inclusions.
(process_test_valid_subdir): Changed printf to report if we are
testing valid or invalid conf files.
(all_are_equiv): Changed printf to be a bit clearer about
what we are actually doing.
(bus_config_parser_test): Test invalid configuration files.
* bus/config-parser.c (bus_config_parser_new): Added a 'parent'
argument. If non-null, the newly-constructed BusConfigParser will
be initialized with the parent's BusLimits instead of the default
values.
(include_file): When including a config file, pass in
the current parser as the parent and then copy the BusLimits
from the included BusConfigParser pack to the current parser.
(process_test_valid_subdir): Renamed from process_test_subdir.
(process_test_equiv_subdir): Added. Walks through a directory,
descending into each subdirectory and loading the config files
it finds there. If any subdirectory contains two config files
that don't produce identical BusConfigParser structs, fail.
For now, the BusConfigParser's BusPolicies are not compared.
(bus_config_parser_test): Call both process_test_valid_subdir and
process_test_equiv_subdir.
* bus/config-loader-libxml.c (bus_config_load): Take a parent
argument and pass it along to the call to bus_config_parser_new.
Also made a few small changes to allow this code to compile.
* bus/config-loader-expat.c (bus_config_load): Take a parent
argument and pass it along to the call to bus_config_parser_new.
* bus/bus.c (bus_context_new): Load the config file
with a NULL parent argument.
hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
* doc/dbus-specification.sgml: don't require header fields
to be 4-byte aligned and specify that fields should be
distinguished from padding by the fact that zero is not
a valid field name.
* doc/TODO: remove re-alignment item and add item to doc
the OBJECT_PATH type.
* dbus/dbus-message.c:
(HeaderField): rename the original member to value_offset
and introduce a name_offset member to keep track of where
the field actually begins.
(adjust_field_offsets): remove.
(append_int_field), (append_uint_field),
(append_string_field): don't align the start of the header
field to a 4-byte boundary.
(get_next_field): impl finding the next marhsalled field
after a given field.
(re_align_field_recurse): impl re-aligning a number of
already marshalled fields.
(delete_field): impl deleting a field of any type and
re-aligning any following fields.
(delete_int_or_uint_field), (delete_string_field): remove.
(set_int_field), (set_uint_field): no need to re-check
that we have the correct type for the field.
(set_string_field): ditto and impl re-aligning any
following fields.
(decode_header_data): update to take into account that
the fields aren't 4-byte aligned any more and the new
way to distinguish padding from header fields. Also,
don't exit when there is too much header padding.
(process_test_subdir): print the directory.
(_dbus_message_test): add test to make sure a following
field is re-aligned correctly after field deletion.
* dbus/dbus-string.[ch]:
(_dbus_string_insert_bytes): rename from insert_byte and
allow the insert of multiple bytes.
(_dbus_string_test): test inserting multiple bytes.
* dbus/dbus-marshal.c: (_dbus_marshal_set_string): add
warning note to docs about having to re-align any
marshalled values following the string.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load):
don't align the header field.
* dbus/dbus-auth.c: (process_test_subdir): print the
directory.
* test/break-loader.c: (randomly_add_one_byte): upd. for
insert_byte change.
* test/data/invalid-messages/bad-header-field-alignment.message:
new test case.
* test/data/valid-messages/unknown-header-field.message: shove
a dict in the unknown field.
Get matching rules mostly working in the bus; only actually
parsing the rule text remains. However, the client side of
"signal connections" hasn't been started, this patch is only the
bus side.
* dbus/dispatch.c: fix for the matching rules changes
* bus/driver.c (bus_driver_handle_remove_match)
(bus_driver_handle_add_match): send an ack reply from these
method calls
* glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of
arguments, reported by Seth Nickell
* bus/config-parser.c (append_rule_from_element): support
eavesdrop=true|false attribute on policies so match rules
can be prevented from snooping on the system bus.
* bus/dbus-daemon-1.1.in: consistently use terminology "sender"
and "destination" in attribute names; fix some docs bugs;
add eavesdrop=true|false attribute
* bus/driver.c (bus_driver_handle_add_match)
(bus_driver_handle_remove_match): handle AddMatch, RemoveMatch
messages
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get
rid of broadcast service concept, signals are just always broadcast
* bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c:
mostly implement matching rules stuff (currently only exposed as signal
connections)
* doc/dbus-specification.sgml: Change the header field name
to be an enum and update the rest of the spec to reference
the fields using the conventinal name.
* dbus/dbus-protocol.h: update to reflect the spec.
* doc/TODO: add item to remove the 4 byte alignment requirement.
* dbus/dbus-message.c: Remove the code to generalise the
header/body length and serial number header fields as named
header fields so we can reference field names using the
protocol values.
(append_int_field), (append_uint_field), (append_string_field):
Append the field name as a byte rather than four chars.
(delete_int_or_uint_field), (delete_string_field): reflect the
fact that the field name and typecode now occupy 4 bytes instead
of 8.
(decode_string_field), (decode_header_data): update to reflect
protocol changes and move the field specific encoding from
decode_string_field() back into decode_header_data().
* dbus/dbus-internals.[ch]: (_dbus_header_field_to_string):
Add utility to aid debugging.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load): Update to
reflect protocol changes; Change the FIELD_NAME directive
to HEADER_FIELD and allow it to take the field's conventional
name rather than the actual value.
* test/data/*/*.message: Update to use HEADER_FIELD instead
of FIELD_NAME; Always align the header on an 8 byte boundary
*before* updating the header length.
* doc/dbus-specification.sgml: partial updates
* bus/dbus-daemon-1.1.in: fix the config file docs for the
zillionth time; hopefully I edited the right file this time.
* bus/config-parser.c (append_rule_from_element): support
send_type, send_path, receive_type, receive_path
* bus/policy.c: add message type and path to the list of things
that can be "firewalled"
* test/data/valid-config-files/system.d/test.conf: change to
root for the user so warnings don't get printed
* dbus/dbus-message.c: add dbus_message_get_path,
dbus_message_set_path
* dbus/dbus-object-tree.c (do_test_dispatch): add test of
dispatching to a path
* dbus/dbus-string.c (_dbus_string_validate_path): add
* dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement
(_dbus_marshal_object_path): implement
* dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field
to contain the path to the target object
(DBUS_HEADER_FIELD_SENDER_SERVICE): rename
DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service
* dbus/dbus-message.c (decode_string_field): support FIELD_SENDER
(dbus_message_is_error): fix this function
* bus/dbus-daemon-1.1: clarify logic on when <deny>/<allow> rules
match
* bus/policy.c (bus_client_policy_check_can_receive): fix code to
reflect clarified man page
(bus_client_policy_check_can_send): ditto
* bus/session.conf.in: fixup
* bus/system.conf.in: fixup
