dbus/test/data/valid-messages/unknown-header-field.message

## message with a 'name' header field and unknown 'unkn' field

## VALID_HEADER includes a LENGTH Header and LENGTH Body
VALID_HEADER method_call
REQUIRED_FIELDS

HEADER_FIELD UNKNOWN
TYPE DICT
LENGTH Dict
START_LENGTH Dict
STRING 'int32'
TYPE INT32
INT32 0x12345678
END_LENGTH Dict

ALIGN 8
END_LENGTH Header
START_LENGTH Body
END_LENGTH Body
2003-02-16 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c (dbus_connection_set_change_sigpipe): allow people to avoid setting SIGPIPE to SIG_IGN (_dbus_connection_new_for_transport): disable SIGPIPE unless we've been asked not to 2003-02-16 07:20:54 +00:00			`## message with a 'name' header field and unknown 'unkn' field`

			`## VALID_HEADER includes a LENGTH Header and LENGTH Body`
2003-08-18 Havoc Pennington <hp@redhat.com> * dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix * dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix dumb bug created earlier (wrong order of args to decode_header_data()) * tools/dbus-send.c: port * tools/dbus-print-message.c (print_message): port * test/data/messages: port all messages over dbus/dbus-message-builder.c: support including message type * bus/driver.c: port over * bus/dispatch.c: port over to new stuff * dbus/dbus-connection.c (_dbus_connection_new_for_transport): rename disconnect signal to "Disconnected" 2003-08-18 22:43:30 +00:00			`VALID_HEADER method_call`
2003-08-30 Havoc Pennington <hp@pobox.com> * test/data/valid-config-files/system.d/test.conf: change to root for the user so warnings don't get printed * dbus/dbus-message.c: add dbus_message_get_path, dbus_message_set_path * dbus/dbus-object-tree.c (do_test_dispatch): add test of dispatching to a path * dbus/dbus-string.c (_dbus_string_validate_path): add * dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement (_dbus_marshal_object_path): implement * dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field to contain the path to the target object (DBUS_HEADER_FIELD_SENDER_SERVICE): rename DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service 2003-08-31 01:51:44 +00:00			`REQUIRED_FIELDS`
2003-09-25 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: don't require header fields to be 4-byte aligned and specify that fields should be distinguished from padding by the fact that zero is not a valid field name. * doc/TODO: remove re-alignment item and add item to doc the OBJECT_PATH type. * dbus/dbus-message.c: (HeaderField): rename the original member to value_offset and introduce a name_offset member to keep track of where the field actually begins. (adjust_field_offsets): remove. (append_int_field), (append_uint_field), (append_string_field): don't align the start of the header field to a 4-byte boundary. (get_next_field): impl finding the next marhsalled field after a given field. (re_align_field_recurse): impl re-aligning a number of already marshalled fields. (delete_field): impl deleting a field of any type and re-aligning any following fields. (delete_int_or_uint_field), (delete_string_field): remove. (set_int_field), (set_uint_field): no need to re-check that we have the correct type for the field. (set_string_field): ditto and impl re-aligning any following fields. (decode_header_data): update to take into account that the fields aren't 4-byte aligned any more and the new way to distinguish padding from header fields. Also, don't exit when there is too much header padding. (process_test_subdir): print the directory. (_dbus_message_test): add test to make sure a following field is re-aligned correctly after field deletion. * dbus/dbus-string.[ch]: (_dbus_string_insert_bytes): rename from insert_byte and allow the insert of multiple bytes. (_dbus_string_test): test inserting multiple bytes. * dbus/dbus-marshal.c: (_dbus_marshal_set_string): add warning note to docs about having to re-align any marshalled values following the string. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): don't align the header field. * dbus/dbus-auth.c: (process_test_subdir): print the directory. * test/break-loader.c: (randomly_add_one_byte): upd. for insert_byte change. * test/data/invalid-messages/bad-header-field-alignment.message: new test case. * test/data/valid-messages/unknown-header-field.message: shove a dict in the unknown field. 2003-09-25 08:50:14 +00:00
2003-09-21 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: Change the header field name to be an enum and update the rest of the spec to reference the fields using the conventinal name. * dbus/dbus-protocol.h: update to reflect the spec. * doc/TODO: add item to remove the 4 byte alignment requirement. * dbus/dbus-message.c: Remove the code to generalise the header/body length and serial number header fields as named header fields so we can reference field names using the protocol values. (append_int_field), (append_uint_field), (append_string_field): Append the field name as a byte rather than four chars. (delete_int_or_uint_field), (delete_string_field): reflect the fact that the field name and typecode now occupy 4 bytes instead of 8. (decode_string_field), (decode_header_data): update to reflect protocol changes and move the field specific encoding from decode_string_field() back into decode_header_data(). * dbus/dbus-internals.[ch]: (_dbus_header_field_to_string): Add utility to aid debugging. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): Update to reflect protocol changes; Change the FIELD_NAME directive to HEADER_FIELD and allow it to take the field's conventional name rather than the actual value. * test/data//.message: Update to use HEADER_FIELD instead of FIELD_NAME; Always align the header on an 8 byte boundary before updating the header length. 2003-09-21 18:43:20 +00:00			`HEADER_FIELD UNKNOWN`
2003-09-25 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: don't require header fields to be 4-byte aligned and specify that fields should be distinguished from padding by the fact that zero is not a valid field name. * doc/TODO: remove re-alignment item and add item to doc the OBJECT_PATH type. * dbus/dbus-message.c: (HeaderField): rename the original member to value_offset and introduce a name_offset member to keep track of where the field actually begins. (adjust_field_offsets): remove. (append_int_field), (append_uint_field), (append_string_field): don't align the start of the header field to a 4-byte boundary. (get_next_field): impl finding the next marhsalled field after a given field. (re_align_field_recurse): impl re-aligning a number of already marshalled fields. (delete_field): impl deleting a field of any type and re-aligning any following fields. (delete_int_or_uint_field), (delete_string_field): remove. (set_int_field), (set_uint_field): no need to re-check that we have the correct type for the field. (set_string_field): ditto and impl re-aligning any following fields. (decode_header_data): update to take into account that the fields aren't 4-byte aligned any more and the new way to distinguish padding from header fields. Also, don't exit when there is too much header padding. (process_test_subdir): print the directory. (_dbus_message_test): add test to make sure a following field is re-aligned correctly after field deletion. * dbus/dbus-string.[ch]: (_dbus_string_insert_bytes): rename from insert_byte and allow the insert of multiple bytes. (_dbus_string_test): test inserting multiple bytes. * dbus/dbus-marshal.c: (_dbus_marshal_set_string): add warning note to docs about having to re-align any marshalled values following the string. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): don't align the header field. * dbus/dbus-auth.c: (process_test_subdir): print the directory. * test/break-loader.c: (randomly_add_one_byte): upd. for insert_byte change. * test/data/invalid-messages/bad-header-field-alignment.message: new test case. * test/data/valid-messages/unknown-header-field.message: shove a dict in the unknown field. 2003-09-25 08:50:14 +00:00			`TYPE DICT`
			`LENGTH Dict`
			`START_LENGTH Dict`
			`STRING 'int32'`
2003-02-16 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c (dbus_connection_set_change_sigpipe): allow people to avoid setting SIGPIPE to SIG_IGN (_dbus_connection_new_for_transport): disable SIGPIPE unless we've been asked not to 2003-02-16 07:20:54 +00:00			`TYPE INT32`
2003-09-25 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: don't require header fields to be 4-byte aligned and specify that fields should be distinguished from padding by the fact that zero is not a valid field name. * doc/TODO: remove re-alignment item and add item to doc the OBJECT_PATH type. * dbus/dbus-message.c: (HeaderField): rename the original member to value_offset and introduce a name_offset member to keep track of where the field actually begins. (adjust_field_offsets): remove. (append_int_field), (append_uint_field), (append_string_field): don't align the start of the header field to a 4-byte boundary. (get_next_field): impl finding the next marhsalled field after a given field. (re_align_field_recurse): impl re-aligning a number of already marshalled fields. (delete_field): impl deleting a field of any type and re-aligning any following fields. (delete_int_or_uint_field), (delete_string_field): remove. (set_int_field), (set_uint_field): no need to re-check that we have the correct type for the field. (set_string_field): ditto and impl re-aligning any following fields. (decode_header_data): update to take into account that the fields aren't 4-byte aligned any more and the new way to distinguish padding from header fields. Also, don't exit when there is too much header padding. (process_test_subdir): print the directory. (_dbus_message_test): add test to make sure a following field is re-aligned correctly after field deletion. * dbus/dbus-string.[ch]: (_dbus_string_insert_bytes): rename from insert_byte and allow the insert of multiple bytes. (_dbus_string_test): test inserting multiple bytes. * dbus/dbus-marshal.c: (_dbus_marshal_set_string): add warning note to docs about having to re-align any marshalled values following the string. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): don't align the header field. * dbus/dbus-auth.c: (process_test_subdir): print the directory. * test/break-loader.c: (randomly_add_one_byte): upd. for insert_byte change. * test/data/invalid-messages/bad-header-field-alignment.message: new test case. * test/data/valid-messages/unknown-header-field.message: shove a dict in the unknown field. 2003-09-25 08:50:14 +00:00			`INT32 0x12345678`
			`END_LENGTH Dict`

2003-02-16 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c (dbus_connection_set_change_sigpipe): allow people to avoid setting SIGPIPE to SIG_IGN (_dbus_connection_new_for_transport): disable SIGPIPE unless we've been asked not to 2003-02-16 07:20:54 +00:00			`ALIGN 8`
			`END_LENGTH Header`
			`START_LENGTH Body`
			`END_LENGTH Body`