cairo/test/Makefile.am
Chris Wilson da9c43329a [test/in-fill-trapezoid] Add test to exercise _cairo_trap_contains().
A simple test to provide coverage of _cairo_trap_contains(), though
not yet seeking boundary conditions.
2008-01-17 11:50:51 +00:00

717 lines
22 KiB
Makefile

SUBDIRS=pdiff .
# Here are all the tests that are run unconditionally
TESTS = \
a8-mask$(EXEEXT) \
big-trap$(EXEEXT) \
caps-joins$(EXEEXT) \
caps-joins-alpha$(EXEEXT) \
caps-sub-paths$(EXEEXT) \
clip-all$(EXEEXT) \
clip-empty$(EXEEXT) \
clip-fill-rule$(EXEEXT) \
clip-fill-rule-pixel-aligned$(EXEEXT) \
clip-nesting$(EXEEXT) \
clip-operator$(EXEEXT) \
clip-push-group$(EXEEXT) \
clip-twice$(EXEEXT) \
clip-zero$(EXEEXT) \
close-path$(EXEEXT) \
composite-integer-translate-source$(EXEEXT) \
composite-integer-translate-over$(EXEEXT) \
composite-integer-translate-over-repeat$(EXEEXT) \
copy-path$(EXEEXT) \
create-for-stream$(EXEEXT) \
create-from-png$(EXEEXT) \
create-from-png-stream$(EXEEXT) \
dash-caps-joins$(EXEEXT) \
dash-curve$(EXEEXT) \
dash-no-dash$(EXEEXT) \
dash-offset-negative$(EXEEXT) \
dash-scale$(EXEEXT) \
dash-state$(EXEEXT) \
dash-zero-length$(EXEEXT) \
degenerate-path$(EXEEXT) \
degenerate-pen$(EXEEXT) \
device-offset$(EXEEXT) \
device-offset-positive$(EXEEXT) \
extend-pad$(EXEEXT) \
fill-and-stroke$(EXEEXT) \
fill-and-stroke-alpha$(EXEEXT) \
fill-and-stroke-alpha-add$(EXEEXT) \
fill-degenerate-sort-order$(EXEEXT) \
fill-missed-stop$(EXEEXT) \
fill-rule$(EXEEXT) \
filter-nearest-offset$(EXEEXT) \
font-face-get-type$(EXEEXT) \
font-matrix-translation$(EXEEXT) \
glyph-cache-pressure$(EXEEXT) \
get-and-set$(EXEEXT) \
get-clip$(EXEEXT) \
get-group-target$(EXEEXT) \
get-path-extents$(EXEEXT) \
gradient-alpha$(EXEEXT) \
gradient-zero-stops$(EXEEXT) \
infinite-join$(EXEEXT) \
in-fill-empty-trapezoid$(EXEEXT) \
in-fill-trapezoid$(EXEEXT) \
invalid-matrix$(EXEEXT) \
leaky-dash$(EXEEXT) \
leaky-polygon$(EXEEXT) \
line-width$(EXEEXT) \
line-width-scale$(EXEEXT) \
line-width-zero$(EXEEXT) \
linear-gradient$(EXEEXT) \
linear-gradient-reflect$(EXEEXT) \
long-lines$(EXEEXT) \
mask$(EXEEXT) \
mask-alpha$(EXEEXT) \
mask-ctm$(EXEEXT) \
mask-surface-ctm$(EXEEXT) \
meta-surface-pattern$(EXEEXT) \
miter-precision$(EXEEXT) \
move-to-show-surface$(EXEEXT) \
new-sub-path$(EXEEXT) \
nil-surface$(EXEEXT) \
operator-clear$(EXEEXT) \
operator-source$(EXEEXT) \
over-above-source$(EXEEXT) \
over-around-source$(EXEEXT) \
over-below-source$(EXEEXT) \
over-between-source$(EXEEXT) \
paint$(EXEEXT) \
paint-repeat$(EXEEXT) \
paint-source-alpha$(EXEEXT) \
paint-with-alpha$(EXEEXT) \
pattern-get-type$(EXEEXT) \
pattern-getters$(EXEEXT) \
pixman-rotate$(EXEEXT) \
push-group$(EXEEXT) \
radial-gradient$(EXEEXT) \
random-intersections$(EXEEXT) \
rectangle-rounding-error$(EXEEXT) \
rectilinear-stroke$(EXEEXT) \
rel-path$(EXEEXT) \
rgb24-ignore-alpha$(EXEEXT) \
rotate-image-surface-paint$(EXEEXT) \
scale-down-source-surface-paint$(EXEEXT) \
scale-source-surface-paint$(EXEEXT) \
select-font-face$(EXEEXT) \
select-font-no-show-text$(EXEEXT) \
self-copy$(EXEEXT) \
self-intersecting$(EXEEXT) \
set-source$(EXEEXT) \
show-text-current-point$(EXEEXT) \
skew-extreme$(EXEEXT) \
solid-pattern-cache-stress$(EXEEXT) \
source-clip$(EXEEXT) \
source-clip-scale$(EXEEXT) \
source-surface-scale-paint$(EXEEXT) \
surface-finish-twice$(EXEEXT) \
surface-pattern$(EXEEXT) \
surface-pattern-big-scale-down$(EXEEXT) \
surface-pattern-scale-down$(EXEEXT) \
surface-pattern-scale-up$(EXEEXT) \
text-antialias-gray$(EXEEXT) \
text-antialias-none$(EXEEXT) \
text-antialias-subpixel$(EXEEXT) \
text-cache-crash$(EXEEXT) \
text-pattern$(EXEEXT) \
text-rotate$(EXEEXT) \
text-zero-len$(EXEEXT) \
transforms$(EXEEXT) \
translate-show-surface$(EXEEXT) \
trap-clip$(EXEEXT) \
truetype-tables$(EXEEXT) \
unantialiased-shapes$(EXEEXT) \
unbounded-operator$(EXEEXT) \
user-data$(EXEEXT) \
zero-alpha$(EXEEXT)
# XXX: Here are some existing tests that are currently disabled for
# one reason or another. They can still be built and run (manually)
# but we don't currently run them as part of 'make check' to avoid
# inflicting some particularly nasty problems on the user of the test
# suite (described below).
#
# It would definitely be worthwhile to address these problems so that
# these tests can get back into the test suite proper, (since the
# problems do indicated bugs somewhere and we're less likely to get
# those bugs fixed without the attention due to having these tests in
# the suite).
#
# The reasons for disabling the tests are as follows:
#
# extend-reflect - Triggers an infinite (or near-infinite) bug in some
# X servers in some circumstances. Details and cause unknown.
#
# show-glyphs-many - This stress test was exercising a particular bug
# in the xlib surface code (exceeding the X11 protocol request
# limit) when rendering several thousand glyphs at once. The
# original xlib-surface bug is fixed now, but the test continues
# to stress some other aspects of the test suite. For example,
# when doing text as paths, the resuilting PostScript file is one
# giant path that ghostscript has a particularly hard time
# with. I'm disabling this test for now, since I don't care about
# that performance problem in ghostscript. (But, there is a
# similar performance problem when using cairo to rasterize the
# equivalen giant path---from an SVG files say---so this might be
# a useful kind of test to bring back again for performance (not
# correctness) testing.
# text-glyph-range - This test triggers the following assertion in cairo:
#
# lt-text-glyph-range: cairo-scaled-font-subsets.c:350:
# _cairo_sub_font_collect: Assertion `collection->num_glyphs ==
# collection->max_glyph + 1' failed.
#
# And as a result causes a failure to be recorded by the test
# suite, (in spite of the XFAIL status of the test). So maybe
# that's just a bug in the test rig that should just consider
# the abort an XFAIL like any other.
DISABLED_TESTS = \
extend-reflect$(EXEEXT) \
show-glyphs-many$(EXEEXT) \
text-glyph-range$(EXEEXT)
# Then we have a collection of tests that are only run if certain
# features are compiled into cairo
if HAVE_PTHREAD
TESTS += pthread-show-text$(EXEEXT)
endif
if CAIRO_HAS_FT_FONT
TESTS += bitmap-font$(EXEEXT)
TESTS += ft-font-create-for-ft-face$(EXEEXT)
TESTS += ft-text-vertical-layout-type1$(EXEEXT)
TESTS += ft-text-vertical-layout-type3$(EXEEXT)
TESTS += ft-text-antialias-none$(EXEEXT)
endif
if CAIRO_HAS_SVG_SURFACE
TESTS += svg-surface$(EXEEXT)
TESTS += svg-clip$(EXEEXT)
endif
if CAIRO_HAS_PDF_SURFACE
TESTS += pdf-features$(EXEEXT)
endif
if CAIRO_HAS_PS_SURFACE
TESTS += ps-features$(EXEEXT)
endif
if CAIRO_HAS_XLIB_SURFACE
TESTS += xlib-surface$(EXEEXT)
endif
if CAIRO_HAS_MULTI_PAGE_SURFACES
TESTS += multi-page$(EXEEXT)
endif
if CAIRO_HAS_SVG_SURFACE
if CAIRO_HAS_PDF_SURFACE
if CAIRO_HAS_PS_SURFACE
TESTS += fallback-resolution$(EXEEXT)
endif
endif
endif
# All tests which have a reference image go here.
REFERENCE_IMAGES = \
a8-mask-ref.png \
bitmap-font-pdf-argb32-ref.png \
bitmap-font-ref.png \
bitmap-font-rgb24-ref.png \
caps-joins-alpha-quartz-ref.png \
caps-joins-alpha-ref.png \
caps-joins-alpha-svg-ref.png \
caps-joins-ref.png \
caps-sub-paths-ref.png \
clip-all-ref.png \
clip-empty-ref.png \
clip-fill-rule-pixel-aligned-ref.png \
clip-fill-rule-pixel-aligned-rgb24-ref.png \
clip-fill-rule-ps-argb32-ref.png \
clip-fill-rule-ps-rgb24-ref.png \
clip-fill-rule-ref.png \
clip-fill-rule-rgb24-ref.png \
clip-nesting-ps-argb32-ref.png \
clip-nesting-ps-rgb24-ref.png \
clip-nesting-quartz-ref.png \
clip-nesting-quartz-rgb24-ref.png \
clip-nesting-ref.png \
clip-nesting-rgb24-ref.png \
clip-operator-ref.png \
clip-operator-ps-argb32-ref.png \
clip-operator-rgb24-ref.png \
clip-push-group-ps-argb32-ref.png \
clip-push-group-ps-rgb24-ref.png \
clip-push-group-quartz-ref.png \
clip-push-group-ref.png \
clip-twice-ps-argb32-ref.png \
clip-twice-ps-rgb24-ref.png \
clip-twice-quartz-ref.png \
clip-twice-quartz-rgb24-ref.png \
clip-twice-ref.png \
clip-twice-rgb24-ref.png \
close-path-ref.png \
composite-integer-translate-over-ref.png \
composite-integer-translate-over-repeat-ref.png \
composite-integer-translate-source-ref.png \
copy-path-ps-argb32-ref.png \
copy-path-ps-rgb24-ref.png \
copy-path-ref.png \
create-from-png-ref.png \
create-from-png-stream-ref.png \
dash-caps-joins-ps-argb32-ref.png \
dash-caps-joins-ps-rgb24-ref.png \
dash-caps-joins-quartz-ref.png \
dash-caps-joins-ref.png \
dash-curve-ref.png \
dash-no-dash-ref.png \
dash-offset-negative-ref.png \
dash-scale-ps-argb32-ref.png \
dash-scale-ps-rgb24-ref.png \
dash-scale-ref.png \
dash-state-ps-argb32-ref.png \
dash-state-ps-rgb24-ref.png \
dash-state-ref.png \
dash-zero-length-ps-argb32-ref.png \
dash-zero-length-ref.png \
dash-zero-length-rgb24-ref.png \
degenerate-pen-ref.png \
degenerate-pen-ps-argb32-ref.png \
degenerate-path-ps-argb32-ref.png \
degenerate-path-ps-rgb24-ref.png \
degenerate-path-ref.png \
degenerate-path-rgb24-ref.png \
device-offset-positive-ref.png \
device-offset-positive-rgb24-ref.png \
device-offset-ref.png \
device-offset-rgb24-ref.png \
extend-pad-ref.png \
extend-reflect-ref.png \
fill-and-stroke-alpha-add-quartz-ref.png \
fill-and-stroke-alpha-add-ref.png \
fill-and-stroke-alpha-quartz-ref.png \
fill-and-stroke-alpha-ref.png \
fill-and-stroke-ps-argb32-ref.png \
fill-and-stroke-ps-rgb24-ref.png \
fill-and-stroke-quartz-ref.png \
fill-and-stroke-quartz-rgb24-ref.png \
fill-and-stroke-ref.png \
fill-and-stroke-rgb24-ref.png \
fill-degenerate-sort-order-quartz-ref.png \
fill-degenerate-sort-order-quartz-rgb24-ref.png \
fill-degenerate-sort-order-ref.png \
fill-degenerate-sort-order-rgb24-ref.png \
fill-missed-stop-ps-argb32-ref.png \
fill-missed-stop-ps-rgb24-ref.png \
fill-missed-stop-ref.png \
fill-missed-stop-rgb24-ref.png \
fill-rule-ps-argb32-ref.png \
fill-rule-quartz-ref.png \
fill-rule-quartz-rgb24-ref.png \
fill-rule-ref.png \
fill-rule-rgb24-ref.png \
filter-nearest-offset-ref.png \
font-matrix-translation-ps-argb32-ref.png \
font-matrix-translation-ps-rgb24-ref.png \
font-matrix-translation-ref.png \
font-matrix-translation-svg-ref.png \
ft-text-antialias-none-ps-argb32-ref.png \
ft-text-antialias-none-ref.png \
ft-text-vertical-layout-type1-ps-argb32-ref.png \
ft-text-vertical-layout-type1-ref.png \
ft-text-vertical-layout-type1-svg-ref.png \
ft-text-vertical-layout-type3-ps-argb32-ref.png \
ft-text-vertical-layout-type3-ref.png \
ft-text-vertical-layout-type3-svg-ref.png \
get-group-target-ref.png \
glyph-cache-pressure-ref.png \
gradient-alpha-ps-argb32-ref.png \
gradient-alpha-ps-rgb24-ref.png \
gradient-alpha-ref.png \
gradient-alpha-rgb24-ref.png \
gradient-zero-stops-ref.png \
gradient-zero-stops-rgb24-ref.png \
infinite-join-ref.png \
leaky-dash-ps-argb32-ref.png \
leaky-dash-ps-rgb24-ref.png \
leaky-dash-ref.png \
leaky-polygon-ref.png \
linear-gradient-reflect-ref.png \
linear-gradient-ps-argb32-ref.png \
linear-gradient-ps-rgb24-ref.png \
linear-gradient-ref.png \
linear-gradient-svg-ref.png \
line-width-ref.png \
line-width-scale-ps-argb32-ref.png \
line-width-scale-ps-rgb24-ref.png \
line-width-scale-ref.png \
long-lines-ref.png \
mask-alpha-ref.png \
mask-alpha-rgb24-ref.png \
mask-ctm-ref.png \
mask-ctm-rgb24-ref.png \
mask-ctm-svg-argb32-ref.png \
mask-ref.png \
mask-rgb24-ref.png \
mask-surface-ctm-ref.png \
mask-surface-ctm-rgb24-ref.png \
mask-surface-ctm-svg-argb32-ref.png \
mask-svg-rgb24-ref.png \
mask-svg-argb32-ref.png \
meta-surface-pattern-ref.png \
meta-surface-pattern-rgb24-ref.png \
miter-precision-ref.png \
move-to-show-surface-ref.png \
new-sub-path-ps-argb32-ref.png \
new-sub-path-ps-rgb24-ref.png \
new-sub-path-quartz-ref.png \
new-sub-path-quartz-rgb24-ref.png \
new-sub-path-ref.png \
new-sub-path-rgb24-ref.png \
nil-surface-ref.png \
nil-surface-rgb24-ref.png \
operator-clear-quartz-ref.png \
operator-clear-quartz-rgb24-ref.png \
operator-clear-ref.png \
operator-clear-rgb24-ref.png \
operator-source-ps-argb32-ref.png \
operator-source-ps-rgb24-ref.png \
operator-source-ref.png \
operator-source-rgb24-ref.png \
over-above-source-ps-argb32-ref.png \
over-above-source-ref.png \
over-above-source-rgb24-ref.png \
over-around-source-ps-argb32-ref.png \
over-around-source-ref.png \
over-around-source-rgb24-ref.png \
over-below-source-ps-argb32-ref.png \
over-below-source-ref.png \
over-below-source-rgb24-ref.png \
over-between-source-ps-argb32-ref.png \
over-between-source-ref.png \
over-between-source-rgb24-ref.png \
paint-ref.png \
paint-repeat-ref.png \
paint-source-alpha-pdf-argb32-ref.png \
paint-source-alpha-ref.png \
paint-source-alpha-svg-ref.png \
paint-with-alpha-ref.png \
paint-with-alpha-svg-ref.png \
pattern-getters-ref.png \
pixman-rotate-ps-argb32-ref.png \
pixman-rotate-ps-rgb24-ref.png \
pixman-rotate-ref.png \
pixman-rotate-rgb24-ref.png \
push-group-ref.png \
push-group-rgb24-ref.png \
push-group-svg-argb32-ref.png \
radial-gradient-ref.png \
radial-gradient-svg-ref.png \
random-intersections-ps-argb32-ref.png \
random-intersections-ps-rgb24-ref.png \
random-intersections-ref.png \
rgb24-ignore-alpha-ref.png \
rectangle-rounding-error-ref.png \
rectilinear-stroke-ref.png \
rel-path-quartz-ref.png \
rel-path-quartz-rgb24-ref.png \
rel-path-ps-rgb24-ref.png \
rel-path-ref.png \
rel-path-rgb24-ref.png \
rotate-image-surface-paint-pdf-argb32-ref.png \
rotate-image-surface-paint-ps-argb32-ref.png \
rotate-image-surface-paint-ps-rgb24-ref.png \
rotate-image-surface-paint-ref.png \
rotate-image-surface-paint-svg-ref.png \
scale-down-source-surface-paint-ref.png \
scale-source-surface-paint-pdf-argb32-ref.png \
scale-source-surface-paint-ref.png \
scale-source-surface-paint-rgb24-ref.png \
scale-source-surface-paint-svg-argb32-ref.png \
scale-source-surface-paint-svg-rgb24-ref.png \
select-font-face-ref.png \
self-copy-ref.png \
self-intersecting-ref.png \
self-intersecting-rgb24-ref.png \
set-source-ref.png \
set-source-rgb24-ref.png \
set-source-svg-argb32-ref.png \
show-glyphs-many-ref.png \
show-text-current-point-ref.png \
skew-extreme-ref.png \
source-clip-ref.png \
source-clip-scale-quartz-ref.png \
source-clip-scale-ps-argb32-ref.png \
source-clip-scale-ps-rgb24-ref.png \
source-clip-scale-ref.png \
source-clip-scale-svg-ref.png \
source-surface-scale-paint-ref.png \
source-surface-scale-paint-rgb24-ref.png \
surface-pattern-big-scale-down-ref.png \
surface-pattern-pdf-argb32-ref.png \
surface-pattern-ps-argb32-ref.png \
surface-pattern-ref.png \
surface-pattern-scale-down-pdf-argb32-ref.png \
surface-pattern-scale-down-ps-argb32-ref.png \
surface-pattern-scale-down-ref.png \
surface-pattern-scale-up-pdf-argb32-ref.png \
surface-pattern-scale-up-ps-argb32-ref.png \
surface-pattern-scale-up-ref.png \
surface-pattern-svg-ref.png \
text-antialias-gray-ref.png \
text-antialias-none-ref.png \
text-antialias-subpixel-ref.png \
text-glyph-range-ref.png \
text-glyph-range-rgb24-ref.png \
text-pattern-ps-argb32-ref.png \
text-pattern-ps-rgb24-ref.png \
text-pattern-ref.png \
text-pattern-rgb24-ref.png \
text-pattern-svg-argb32-ref.png \
text-pattern-svg-rgb24-ref.png \
text-rotate-ps-argb32-ref.png \
text-rotate-ps-rgb24-ref.png \
text-rotate-ref.png \
text-rotate-svg-ref.png \
text-zero-len-ref.png \
transforms-ref.png \
translate-show-surface-ref.png \
trap-clip-quartz-ref.png \
trap-clip-quartz-rgb24-ref.png \
trap-clip-ps-argb32-ref.png \
trap-clip-ps-rgb24-ref.png \
trap-clip-ref.png \
trap-clip-rgb24-ref.png \
unantialiased-shapes-ref.png \
unbounded-operator-ref.png \
unbounded-operator-rgb24-ref.png \
zero-alpha-ref.png
EXTRA_DIST = \
6x13.pcf \
make-html.pl \
romedalen.png \
$(REFERENCE_IMAGES)
# Any test for which the code committed to CVS is expected to fail
# should be listed here.
#
# This way, we can avoid being bothered by reports of bugs we are
# aware of, but users can still report when tests start behaving in
# unexpected ways on their system.
#
# Of course, before any "release" of cairo we should eliminate
# everything from this list by fixing the bugs. (We don't necessarily
# have to be that strict for "snapshots" though.)
#
# Also, any test listed here should call cairo_test_expect_failure and
# provide an explanation for the expected failure.
XFAIL_TESTS = \
a8-mask$(EXEEXT) \
big-trap$(EXEEXT) \
extend-pad$(EXEEXT) \
filter-nearest-offset$(EXEEXT) \
long-lines$(EXEEXT) \
self-intersecting$(EXEEXT) \
surface-pattern$(EXEEXT) \
surface-pattern-big-scale-down$(EXEEXT) \
surface-pattern-scale-down$(EXEEXT) \
surface-pattern-scale-up$(EXEEXT)
# Any test that doesn't generate a log file goes here
NOLOG_TESTS = \
user-data \
svg-surface \
svg-clip \
pdf-features \
ps-features \
multi-page \
fallback-resolution
# A hook that summarises the failures
check: AM_MAKEFLAGS+=-k
check-local:
@FAILED_TESTS=""; \
for t in *.log; do \
if grep -e '\<FAIL\>' $$t >/dev/null 2>&1; then \
FAILED_TESTS="$$FAILED_TESTS $${t%.log}"; \
fi; \
done; \
if test -n "$$FAILED_TESTS"; then \
echo "Failed tests:"; \
for t in $$FAILED_TESTS; do \
echo -n " $$t: "; \
grep -e '\<FAIL\>' $$t.log | sed -e 's/.*TARGET: \([^ ]*\).*/\1/' | sort | uniq | tr '\n' ' '; \
echo; \
done; \
fi
check_PROGRAMS =
EXTRA_PROGRAMS =
# We're using _GNU_SOURCE to get the prototype for asprintf. This may
# not be the most portable approach, but it is pragmatic and I'm
# willing to do something cleaner as soon as it causes someone a
# problem.
INCLUDES = \
-D_GNU_SOURCE \
-I$(srcdir) \
-I$(srcdir)/pdiff \
-I$(top_srcdir)/boilerplate \
-I$(top_srcdir)/pixman/src \
-I$(top_srcdir)/src \
-I$(top_builddir)/src \
$(CAIRO_CFLAGS)
EXTRA_LTLIBRARIES = libcairotest.la
libcairotest_la_SOURCES =\
buffer-diff.c \
buffer-diff.h \
cairo-test.c \
cairo-test.h
libcairotest_la_LIBADD =\
$(top_builddir)/test/pdiff/libpdiff.la \
$(top_builddir)/boilerplate/libcairoboilerplate.la \
$(top_builddir)/src/libcairo.la \
$(CAIRO_LDADD)
LDADD = $(CAIRO_LDADD) libcairotest.la
$(top_builddir)/boilerplate/libcairoboilerplate.la: $(top_builddir)/src/libcairo.la
cd $(top_builddir)/boilerplate && $(MAKE) $(AM_MAKEFLAGS) libcairoboilerplate.la
$(top_builddir)/src/libcairo.la:
cd $(top_builddir)/src && $(MAKE) $(AM_MAKEFLAGS) libcairo.la
$(top_builddir)/test/pdiff/libpdiff.la:
cd $(top_builddir)/test/pdiff && $(MAKE) $(AM_MAKEFLAGS) libpdiff.la
if HAVE_PTHREAD
LDADD += -lpthread
endif
check_PROGRAMS += imagediff png-flatten
if CAIRO_CAN_TEST_PDF_SURFACE
check_PROGRAMS += pdf2png
pdf2png_CFLAGS = $(POPPLER_CFLAGS)
# add LDADD, so poppler uses "our" cairo
pdf2png_LDADD = $(LDADD) $(POPPLER_LIBS)
endif
if CAIRO_CAN_TEST_SVG_SURFACE
check_PROGRAMS += svg2png
svg2png_CFLAGS = $(LIBRSVG_CFLAGS)
# add LDADD, so librsvg uses "our" cairo
svg2png_LDADD = $(LDADD) $(LIBRSVG_LIBS)
endif
EXTRA_PROGRAMS += $(TESTS) $(DISABLED_TESTS)
# Do a funny transition of CAIRO_TEST_TARGET through TARGETS such that
# one can limit tested targets both through CAIRO_TEST_TARGET env var
# and TARGETS make var on the command line. Same for the rest.
TARGETS = $(CAIRO_TEST_TARGET)
TARGETS_EXCLUDE = $(CAIRO_TEST_TARGET_EXCLUDE)
TESTS_ENVIRONMENT = CAIRO_XFAIL_TESTS="$(XFAIL_TESTS:$(EXEEXT)=)" CAIRO_TEST_TARGET="$(TARGETS)" CAIRO_TEST_TARGET_EXCLUDE="$(TARGETS_EXCLUDE)"
EXTRA_VALGRIND_FLAGS = $(CAIRO_EXTRA_VALGRIND_FLAGS)
VALGRIND_FLAGS = \
--tool=memcheck --suppressions=$(srcdir)/.valgrind-suppressions \
--leak-check=yes --show-reachable=yes $(EXTRA_VALGRIND_FLAGS)
CLEANFILES = \
valgrind-log \
index.html \
ref.hash \
$(EXTRA_LTLIBRARIES) \
$(EXTRA_PROGRAMS)
# This used to be a simple 'echo ${RM} *.ps *.pdf *.svg *.etc', but
# most systems cannot handle all of our clean files together.
# Then it became a fancy find using many GNU extensions, but then the ugly
# reality of portability was raised and it became....
clean-local:
-${FIND} . -name '*.ps' -print | ${XARGS} ${RM}
-${FIND} . -name '*.pdf' -print | ${XARGS} ${RM}
-${FIND} . -name '*.svg' -print | ${XARGS} ${RM}
-${FIND} . -name '*-out.png' -print | ${XARGS} ${RM}
-${FIND} . -name '*-diff.png' -print | ${XARGS} ${RM}
-${FIND} . -name '*.log' -print | ${XARGS} ${RM}
# Check tests under valgrind
# Saves log to valgrind-log
check-valgrind:
$(MAKE) $(AM_MAKEFLAGS) check TESTS_ENVIRONMENT='$(TESTS_ENVIRONMENT) $(top_builddir)/libtool --mode=execute valgrind $(VALGRIND_FLAGS)' 2>&1 | tee valgrind-log
# The following definitions both should work.
#FAILED_TESTS = `grep -l '\<FAIL\>' $(TESTS:$(EXEEXT)=.log) 2>/dev/null | sed -e 's/[.]log$$//' | xargs echo`
FAILED_TESTS = `grep -l '\<FAIL\>' $(TESTS:$(EXEEXT)=.log) 2>/dev/null | tr '\n' ' ' | sed -e 's/[.]log */ /g; s/^ //; s/ $$//'`
recheck = check TESTS="$(FAILED_TESTS)"
# Re-checks all failed tests, i.e. tests with a log file that has a failure
recheck:
@echo Re-checking failed tests
@$(MAKE) $(AM_MAKEFLAGS) $(recheck)
# Checks tests and creates index.html.
# Target doesn't fail if tests fail.
test:
@$(MAKE) $(AM_MAKEFLAGS) check; \
$(MAKE) $(AM_MAKEFLAGS) html
# Re-checks tests and creates index.html.
# Target doesn't fail if tests fail.
retest:
@TESTS="$(FAILED_TESTS)"; \
$(MAKE) $(AM_MAKEFLAGS) TESTS="$$TESTS" check; \
$(MAKE) $(AM_MAKEFLAGS) TESTS="$$TESTS" html
# Make index.html with no dependency tracking.
html:
@echo Creating index.html
@perl $(srcdir)/make-html.pl $(TESTS:$(EXEEXT)=.log) > index.html
# Make index.html with no dependency tracking, containing only the failed tests.
rehtml:
@$(MAKE) $(AM_MAKEFLAGS) TESTS="$(FAILED_TESTS)" html
%.log: % $(check_PROGRAMS)
-./$<
NOLOG_TESTS_LOG = $(NOLOG_TESTS:=.log)
$(NOLOG_TESTS_LOG):
echo dummy > $@
index.html: $(srcdir)/make-html.pl $(TESTS:$(EXEEXT)=.log)
@echo Creating index.html
@perl $^ > $@
# Identify identical reference images
check-ref-dups:
@sha1sum *-ref.png > ref.hash
@join ref.hash ref.hash | grep -v -E '( .*-ref.png).*\1' | cut -d' ' -f 1-2 | sort -u
# Not exactly the best script in the world...
check-ref-missing:
@missing=""; \
for i in `git ls-files *-ref.png`; do \
echo ${REFERENCE_IMAGES} | grep -sq $$i || missing="$$missing $$i" ; \
done ; \
if test -n "$$missing"; then \
echo "Some reference files are not included in the distribution." ;\
echo "Missing from REFERENCE_IMAGES:$$missing" ; \
exit 1; \
fi
release-verify-sane-tests: check-ref-missing
.PHONY: check-valgrind test recheck retest html rehtml check-ref-dups check-ref-missing release-verify-sane-tests