This appears to be the simplest mechanism to build libglew at the moment -
should a system copy be unavailable. Fortunately libglew is now distributed
under a permissive licence.
If you want to pass 'make -C src check' you have to use the system copy,
or spend quite a bit of time cairo-fying libglew.
There you go Joonas, I don't always ignore your suggestions! This is
simple patch to allow the user to disable symbol loops in case the
auto-detection fails on some obscure (perhaps OpenBSD) platform. Or in
case the user really wants to trim a few bytes from a library only used
during tracing!
Some environments may be broken beyond our capabilities to detect, or
maybe the user is just insane and doesn't want to build my nice shiny
cairo-trace. Whatever, give them the option to choose:
$ ./configure --disable-trace
Sometimes it's convenient to run the regression or performance tests
against a given target with a given content. Now we accept an optional
content specifier as a suffix .<content> on a target name, where
<content> is rgb or rgba.
For the purposes of benchmarking it is useful to run cairo-perf against a
different library from the one it was compiled against. In order to do so,
we need to check that the runtime library contains the required entry
points for our targets - which we can check by using dlsym.
Originally written by Vladimir Vukicevic to investigate using Skia for
Mozilla, it provides a nice integration with a rather interesting code
base. By hooking Skia underneath Cairo it allows us to directly compare
code paths... which is interesting.
[updated by Chris Wilson]
A very simple surface that produces a hierarchical DAG in a simple XML
format. It is intended to be used whilst debugging, for example with the
automatic regression finding tools of cairo-sphinx, and with test suites
that just want to verify that their code made a particular Cairo call.
Add a new surface type that multiplies it input onto several output
surfaces. The only limitation is that it requires a master surface that is
used whenever we need to query surface options, such as font options and
extents.
cairo_script_context_t is an encapsulation object for interfacing with the
output - multiple surfaces can share the same context, meaning that they
write to the same destination file/stream.
Remove the intermediate C program that was a nuisance whilst
cross-compiling and replace it with a simple shell script that is just a
combination of cat + sed.
Prior to introduction of the buggy members to the surface, we obviously
cannot set them. However, the boilerplate code is meant to compile against
older revisions of the library so we need to check for the existence prior
to use.
Use the DRM interface to h/w accelerate composition on image surfaces.
The purpose of the backend is simply to explore what such a hardware
interface might look like and what benefits we might expect. The
use case that might justify writing such custom backends are embedded
devices running a drm compositor like wayland - which would, for example,
allow one to write applications that seamlessly integrated accelerated,
dynamic, high quality 2D graphics using Cairo with advanced interaction
(e.g. smooth animations in the UI) driven by a clutter framework...
In this first step we introduce the fundamental wrapping of GEM for intel
and radeon chipsets, and, for comparison, gallium. No acceleration, all
we do is use buffer objects (that is use the kernel memory manager) to
allocate images and simply use the fallback mechanism. This provides a
suitable base to start writing chip specific drivers.
Handling clip as part of the surface state, as opposed to being part of
the operation state, is cumbersome and a hindrance to providing true proxy
surface support. For example, the clip must be copied from the surface
onto the fallback image, but this was forgotten causing undue hassle in
each backend. Another example is the contortion the meta surface
endures to ensure the clip is correctly recorded. By contrast passing the
clip along with the operation is quite simple and enables us to write
generic handlers for providing surface wrappers. (And in the future, we
should be able to write more esoteric wrappers, e.g. automatic 2x FSAA,
trivially.)
In brief, instead of the surface automatically applying the clip before
calling the backend, the backend can call into a generic helper to apply
clipping. For raster surfaces, clip regions are handled automatically as
part of the composite interface. For vector surfaces, a clip helper is
introduced to replay and callback into an intersect_clip_path() function
as necessary.
Whilst this is not primarily a performance related change (the change
should just move the computation of the clip from the moment it is applied
by the user to the moment it is required by the backend), it is important
to track any potential regression:
ppc:
Speedups
========
image-rgba evolution-20090607-0 1026085.22 0.18% -> 672972.07 0.77%: 1.52x speedup
▌
image-rgba evolution-20090618-0 680579.98 0.12% -> 573237.66 0.16%: 1.19x speedup
▎
image-rgba swfdec-fill-rate-4xaa-0 460296.92 0.36% -> 407464.63 0.42%: 1.13x speedup
▏
image-rgba swfdec-fill-rate-2xaa-0 128431.95 0.47% -> 115051.86 0.42%: 1.12x speedup
▏
Slowdowns
=========
image-rgba firefox-periodic-table-0 56837.61 0.78% -> 66055.17 3.20%: 1.09x slowdown
▏
Based on the work by Øyvind Kolås and Pierre Tardy -- many thanks to
Pierre for pushing this backend for inclusion as well as testing and
reviewing my initial patch. And many more thanks to pippin for writing the
backend in the first place!
Hacked and chopped by myself into a suitable basis for a backend. Quite a
few issues remain open, but would seem to be ready for testing on suitable
hardware.
By moving the backend target definition out of the massive amlagamated
block in cairo-boilerplate.c and into each of the
cairo-boilerplate-backend.c, we make it much easier to add new targets as
the information need only be entered in a single file and not scattered
across three. However, updating the target interface means trawling across
all the files -- except given that I found it difficult maintaining the
single massive array I do not see this as an increase in the maintenance
burden.
The meta-surface is a vital tool to record a trace of drawing commands
in-memory. As such it is used throughout cairo.
The value of such a surface is immediately obvious and should be
applicable for many applications. The first such case is by
cairo-test-trace which wants to record the entire graph of drawing commands
that affect a surface in the event of a failure.
During cairo_boilerplate_get_image_surface_from_png() the original status
returned by cairo_image_surface_create_from_png() could have been masked
by inappropriate context construction when flattening or extracting.
Simply check after creating the surface from the png file, and return
immediately if in error.
Only use the RGB16_565 surface as a source during testing. We presume that
pixman is itself rigorously tested and the output is equivalent to the
image surface. Enabling this test surface would require too large of a
burden to maintain the reference images for the 16-bit backend.
Test case for:
Bug 22441 -- Unexpected shift with push_group and pop_group
https://bugs.freedesktop.org/show_bug.cgi?id=22441
This is a test that demonstrates the error in the pdf backend when using
groups on surfaces with non-integer sizes. In order to create such a
surface, we need to update the boilerplate to use doubles instead of
integers when specifying the surface size.
Create an xlib target that uses a separate display, specified by
CAIRO_REFERENCE_DISPLAY, that can be used as a reference implementation
for the normal display. So this can be used by cairo-trace-test to create
a reference surface that mimics exactly the true surface, but if it
targets an Xvfb display will be entirely rendered in software. If
CAIRO_REFERENCE_DISPLAY is not set, the reference surface degrades into an
xlib-fallback surface which is a close approximation (but still has
behavioural differences).
Specify another boilerplate target to use as the reference for this
target. We then use this in cairo-test-trace in preference to using the
image surface. Still not perfect, though the framework is improving.
Written by Vladimir Vukicevic to enable integration with Qt embedded
devices, this backend allows cairo code to target QPainter, and use
it as a source for other cairo backends.
This imports the sources from mozilla-central:
http://mxr.mozilla.org/mozilla-central/find?text=&kind=text&string=cairo-qpainter
renames them from cairo-qpainter to cairo-qt, and integrates the patch
by Oleg Romashin:
https://bugs.freedesktop.org/attachment.cgi?id=18953
And then attempts to restore 'make check' to full functionality.
However:
- C++ does not play well with the PLT symbol hiding, and leaks into the
global namespace. 'make check' fails at check-plt.sh
- Qt embeds a GUI into QApplication which it requires to construct any
QPainter drawable, i.e. used by the boilerplate to create a cairo-qt
surface, and this leaks fonts (cairo-ft-fonts no less) causing assertion
failures that all cairo objects are accounted for upon destruction.
[Updated by Chris Wilson]
Acked-by: Jeff Muizelaar <jeff@infidigm.net>
Acked-by: Carl Worth <cworth@cworth.org>
Using a null surface is a convenient method to measure the overhead of the
performance testing framework, so export it although as a test-surface so
that it will only be available in development builds and not pollute
distributed libraries.
Improve the 'Cannot find target ...' error message for an incorrect
CAIRO_TEST_TARGET by actually listing the targets that have been compiled
into the test suite.
