fdo-mirrors/NetworkManager
1
0
Fork 0
mirror of https://gitlab.freedesktop.org/NetworkManager/NetworkManager.git synced 2026-05-27 06:48:16 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions
NetworkManager/src/tests/client/test-client.check-on-disk/test_002.expected
Wen Liang 658aef0fa1 connection: Support connection.ip-ping-addresses 
We have encountered multiple incidents where users face connectivity
issues after booting, particularly due to hardware like switches that do
not pass traffic for a few seconds after startup. And services such as
NFS fail to mount because they try to initiate before the network is
fully reachable. Therefore, we are supporting
`connection.ip-ping-addresses` and `connection.ip-ping-timeout` to
allow administrators to configure the network to verify connectivity to
a specific target(such as a service like NFS) instead of relying on
gateway reachability, which may not always be relevant in certain
network configurations.

Resolves: https://issues.redhat.com/browse/RHEL-21160
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2034
https://gitlab.freedesktop.org/NetworkManager/NetworkManager-ci/-/merge_requests/1797
2024-11-05 14:04:26 -05:00

588 lines
24 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

size: 376
location: src/tests/client/test-client.py:test_002()/1
cmd: $NMCLI d
lang: C
returncode: 0
stdout: 258 bytes
>>>
DEVICE TYPE STATE CONNECTION
eth0 ethernet unavailable --
eth1 ethernet unavailable --
wlan0 wifi unavailable --
wlan1 wifi unavailable --
wlan1 wifi unavailable --
<<<
size: 391
location: src/tests/client/test-client.py:test_002()/2
cmd: $NMCLI d
lang: pl_PL.UTF-8
returncode: 0
stdout: 263 bytes
>>>
DEVICE TYPE STATE CONNECTION
eth0 ethernet niedostępne --
eth1 ethernet niedostępne --
wlan0 wifi niedostępne --
wlan1 wifi niedostępne --
wlan1 wifi niedostępne --
<<<
size: 977
location: src/tests/client/test-client.py:test_002()/3
cmd: $NMCLI -f all d
lang: C
returncode: 0
stdout: 852 bytes
>>>
DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH CONNECTION CON-UUID CON-PATH
eth0 ethernet unavailable unknown unknown /org/freedesktop/NetworkManager/Devices/1 -- -- --
eth1 ethernet unavailable unknown unknown /org/freedesktop/NetworkManager/Devices/2 -- -- --
wlan0 wifi unavailable unknown unknown /org/freedesktop/NetworkManager/Devices/3 -- -- --
wlan1 wifi unavailable unknown unknown /org/freedesktop/NetworkManager/Devices/4 -- -- --
wlan1 wifi unavailable unknown unknown /org/freedesktop/NetworkManager/Devices/5 -- -- --
<<<
size: 992
location: src/tests/client/test-client.py:test_002()/4
cmd: $NMCLI -f all d
lang: pl_PL.UTF-8
returncode: 0
stdout: 857 bytes
>>>
DEVICE TYPE STATE IP4-CONNECTIVITY IP6-CONNECTIVITY DBUS-PATH CONNECTION CON-UUID CON-PATH
eth0 ethernet niedostępne nieznane nieznane /org/freedesktop/NetworkManager/Devices/1 -- -- --
eth1 ethernet niedostępne nieznane nieznane /org/freedesktop/NetworkManager/Devices/2 -- -- --
wlan0 wifi niedostępne nieznane nieznane /org/freedesktop/NetworkManager/Devices/3 -- -- --
wlan1 wifi niedostępne nieznane nieznane /org/freedesktop/NetworkManager/Devices/4 -- -- --
wlan1 wifi niedostępne nieznane nieznane /org/freedesktop/NetworkManager/Devices/5 -- -- --
<<<
size: 738
location: src/tests/client/test-client.py:test_002()/5
cmd: $NMCLI
lang: C
returncode: 0
stdout: 621 bytes
>>>
eth0: unavailable
"eth0"
ethernet (virtual), 65:2E:D3:9E:0A:0D, hw
eth1: unavailable
"eth1"
ethernet (virtual), 47:D5:6B:65:FD:6A, hw
wlan0: unavailable
"wlan0"
wifi (virtual), 3D:99:1D:8B:74:4D, hw
wlan1: unavailable
"wlan1"
wifi (virtual), 99:09:77:FD:FE:1D, hw
wlan1: unavailable
"wlan1"
wifi (virtual), 5D:30:4A:EC:3F:61, hw
DNS configuration:
servers: 1.2.3.4 5.6.7.8
Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.
Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.
<<<
size: 811
location: src/tests/client/test-client.py:test_002()/6
cmd: $NMCLI
lang: pl_PL.UTF-8
returncode: 0
stdout: 684 bytes
>>>
eth0: niedostępne
"eth0"
ethernet (virtual), 65:2E:D3:9E:0A:0D, sprzęt
eth1: niedostępne
"eth1"
ethernet (virtual), 47:D5:6B:65:FD:6A, sprzęt
wlan0: niedostępne
"wlan0"
wifi (virtual), 3D:99:1D:8B:74:4D, sprzęt
wlan1: niedostępne
"wlan1"
wifi (virtual), 99:09:77:FD:FE:1D, sprzęt
wlan1: niedostępne
"wlan1"
wifi (virtual), 5D:30:4A:EC:3F:61, sprzęt
DNS configuration:
servers: 1.2.3.4 5.6.7.8
Polecenie „nmcli device show” wyświetli pełne informacje o znanych
urządzeniach, a „nmcli connection show” wyświetli przegląd aktywnych
profili połączeń.
Strony podręcznika nmcli(1) i nmcli-examples(7) zawierają pełne informacje
o użyciu.
<<<
size: 1423
location: src/tests/client/test-client.py:test_002()/7
cmd: $NMCLI -f AP -mode multiline d show wlan0
lang: C
returncode: 0
stdout: 1271 bytes
>>>
AP[1].IN-USE:
AP[1].BSSID: 60:B3:25:25:E2:C8
AP[1].SSID: wlan0-ap-3
AP[1].MODE: Infra
AP[1].CHAN: 1
AP[1].RATE: 54 Mbit/s
AP[1].SIGNAL: 55
AP[1].BARS: **
AP[1].SECURITY: WPA3
AP[2].IN-USE:
AP[2].BSSID: 90:B1:5F:9E:E0:E3
AP[2].SSID: wlan0-ap-1
AP[2].MODE: Infra
AP[2].CHAN: 1
AP[2].RATE: 54 Mbit/s
AP[2].SIGNAL: 44
AP[2].BARS: **
AP[2].SECURITY: WPA1
AP[3].IN-USE:
AP[3].BSSID: 61:66:D2:E7:44:A2
AP[3].SSID: wlan0-ap-2
AP[3].MODE: Infra
AP[3].CHAN: 1
AP[3].RATE: 54 Mbit/s
AP[3].SIGNAL: 34
AP[3].BARS: **
AP[3].SECURITY: WPA1 WPA2
<<<
size: 1460
location: src/tests/client/test-client.py:test_002()/8
cmd: $NMCLI -f AP -mode multiline d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 1298 bytes
>>>
AP[1].IN-USE:
AP[1].BSSID: 60:B3:25:25:E2:C8
AP[1].SSID: wlan0-ap-3
AP[1].MODE: Infrastruktura
AP[1].CHAN: 1
AP[1].RATE: 54 Mb/s
AP[1].SIGNAL: 55
AP[1].BARS: **
AP[1].SECURITY: WPA3
AP[2].IN-USE:
AP[2].BSSID: 90:B1:5F:9E:E0:E3
AP[2].SSID: wlan0-ap-1
AP[2].MODE: Infrastruktura
AP[2].CHAN: 1
AP[2].RATE: 54 Mb/s
AP[2].SIGNAL: 44
AP[2].BARS: **
AP[2].SECURITY: WPA1
AP[3].IN-USE:
AP[3].BSSID: 61:66:D2:E7:44:A2
AP[3].SSID: wlan0-ap-2
AP[3].MODE: Infrastruktura
AP[3].CHAN: 1
AP[3].RATE: 54 Mb/s
AP[3].SIGNAL: 34
AP[3].BARS: **
AP[3].SECURITY: WPA1 WPA2
<<<
size: 1877
location: src/tests/client/test-client.py:test_002()/9
cmd: $NMCLI -f AP -mode multiline -p d show wlan0
lang: C
returncode: 0
stdout: 1722 bytes
>>>
===============================================================================
Device details (wlan0)
===============================================================================
AP[1].IN-USE:
AP[1].BSSID: 60:B3:25:25:E2:C8
AP[1].SSID: wlan0-ap-3
AP[1].MODE: Infra
AP[1].CHAN: 1
AP[1].RATE: 54 Mbit/s
AP[1].SIGNAL: 55
AP[1].BARS: **
AP[1].SECURITY: WPA3
-------------------------------------------------------------------------------
AP[2].IN-USE:
AP[2].BSSID: 90:B1:5F:9E:E0:E3
AP[2].SSID: wlan0-ap-1
AP[2].MODE: Infra
AP[2].CHAN: 1
AP[2].RATE: 54 Mbit/s
AP[2].SIGNAL: 44
AP[2].BARS: **
AP[2].SECURITY: WPA1
-------------------------------------------------------------------------------
AP[3].IN-USE:
AP[3].BSSID: 61:66:D2:E7:44:A2
AP[3].SSID: wlan0-ap-2
AP[3].MODE: Infra
AP[3].CHAN: 1
AP[3].RATE: 54 Mbit/s
AP[3].SIGNAL: 34
AP[3].BARS: **
AP[3].SECURITY: WPA1 WPA2
-------------------------------------------------------------------------------
<<<
size: 1922
location: src/tests/client/test-client.py:test_002()/10
cmd: $NMCLI -f AP -mode multiline -p d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 1756 bytes
>>>
===============================================================================
Informacje o urządzeniu (wlan0)
===============================================================================
AP[1].IN-USE:
AP[1].BSSID: 60:B3:25:25:E2:C8
AP[1].SSID: wlan0-ap-3
AP[1].MODE: Infrastruktura
AP[1].CHAN: 1
AP[1].RATE: 54 Mb/s
AP[1].SIGNAL: 55
AP[1].BARS: **
AP[1].SECURITY: WPA3
-------------------------------------------------------------------------------
AP[2].IN-USE:
AP[2].BSSID: 90:B1:5F:9E:E0:E3
AP[2].SSID: wlan0-ap-1
AP[2].MODE: Infrastruktura
AP[2].CHAN: 1
AP[2].RATE: 54 Mb/s
AP[2].SIGNAL: 44
AP[2].BARS: **
AP[2].SECURITY: WPA1
-------------------------------------------------------------------------------
AP[3].IN-USE:
AP[3].BSSID: 61:66:D2:E7:44:A2
AP[3].SSID: wlan0-ap-2
AP[3].MODE: Infrastruktura
AP[3].CHAN: 1
AP[3].RATE: 54 Mb/s
AP[3].SIGNAL: 34
AP[3].BARS: **
AP[3].SECURITY: WPA1 WPA2
-------------------------------------------------------------------------------
<<<
size: 670
location: src/tests/client/test-client.py:test_002()/11
cmd: $NMCLI -f AP -mode multiline -t d show wlan0
lang: C
returncode: 0
stdout: 515 bytes
>>>
AP[1].IN-USE:
AP[1].BSSID:60:B3:25:25:E2:C8
AP[1].SSID:wlan0-ap-3
AP[1].MODE:Infra
AP[1].CHAN:1
AP[1].RATE:54 Mbit/s
AP[1].SIGNAL:55
AP[1].BARS:**
AP[1].SECURITY:WPA3
AP[2].IN-USE:
AP[2].BSSID:90:B1:5F:9E:E0:E3
AP[2].SSID:wlan0-ap-1
AP[2].MODE:Infra
AP[2].CHAN:1
AP[2].RATE:54 Mbit/s
AP[2].SIGNAL:44
AP[2].BARS:**
AP[2].SECURITY:WPA1
AP[3].IN-USE:
AP[3].BSSID:61:66:D2:E7:44:A2
AP[3].SSID:wlan0-ap-2
AP[3].MODE:Infra
AP[3].CHAN:1
AP[3].RATE:54 Mbit/s
AP[3].SIGNAL:34
AP[3].BARS:**
AP[3].SECURITY:WPA1 WPA2
<<<
size: 707
location: src/tests/client/test-client.py:test_002()/12
cmd: $NMCLI -f AP -mode multiline -t d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 542 bytes
>>>
AP[1].IN-USE:
AP[1].BSSID:60:B3:25:25:E2:C8
AP[1].SSID:wlan0-ap-3
AP[1].MODE:Infrastruktura
AP[1].CHAN:1
AP[1].RATE:54 Mb/s
AP[1].SIGNAL:55
AP[1].BARS:**
AP[1].SECURITY:WPA3
AP[2].IN-USE:
AP[2].BSSID:90:B1:5F:9E:E0:E3
AP[2].SSID:wlan0-ap-1
AP[2].MODE:Infrastruktura
AP[2].CHAN:1
AP[2].RATE:54 Mb/s
AP[2].SIGNAL:44
AP[2].BARS:**
AP[2].SECURITY:WPA1
AP[3].IN-USE:
AP[3].BSSID:61:66:D2:E7:44:A2
AP[3].SSID:wlan0-ap-2
AP[3].MODE:Infrastruktura
AP[3].CHAN:1
AP[3].RATE:54 Mb/s
AP[3].SIGNAL:34
AP[3].BARS:**
AP[3].SECURITY:WPA1 WPA2
<<<
size: 530
location: src/tests/client/test-client.py:test_002()/13
cmd: $NMCLI -f AP -mode tabular d show wlan0
lang: C
returncode: 0
stdout: 380 bytes
>>>
NAME IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
AP[1] 60:B3:25:25:E2:C8 wlan0-ap-3 Infra 1 54 Mbit/s 55 ** WPA3
AP[2] 90:B1:5F:9E:E0:E3 wlan0-ap-1 Infra 1 54 Mbit/s 44 ** WPA1
AP[3] 61:66:D2:E7:44:A2 wlan0-ap-2 Infra 1 54 Mbit/s 34 ** WPA1 WPA2
<<<
size: 574
location: src/tests/client/test-client.py:test_002()/14
cmd: $NMCLI -f AP -mode tabular d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 414 bytes
>>>
NAME IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
AP[1] 60:B3:25:25:E2:C8 wlan0-ap-3 Infrastruktura 1 54 Mb/s 55 ** WPA3
AP[2] 90:B1:5F:9E:E0:E3 wlan0-ap-1 Infrastruktura 1 54 Mb/s 44 ** WPA1
AP[3] 61:66:D2:E7:44:A2 wlan0-ap-2 Infrastruktura 1 54 Mb/s 34 ** WPA1 WPA2
<<<
size: 708
location: src/tests/client/test-client.py:test_002()/15
cmd: $NMCLI -f AP -mode tabular -p d show wlan0
lang: C
returncode: 0
stdout: 555 bytes
>>>
==========================
Device details (wlan0)
==========================
NAME IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
-----------------------------------------------------------------------------------------------
AP[1] 60:B3:25:25:E2:C8 wlan0-ap-3 Infra 1 54 Mbit/s 55 ** WPA3
AP[2] 90:B1:5F:9E:E0:E3 wlan0-ap-1 Infra 1 54 Mbit/s 44 ** WPA1
AP[3] 61:66:D2:E7:44:A2 wlan0-ap-2 Infra 1 54 Mbit/s 34 ** WPA1 WPA2
<<<
size: 788
location: src/tests/client/test-client.py:test_002()/16
cmd: $NMCLI -f AP -mode tabular -p d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 625 bytes
>>>
===================================
Informacje o urządzeniu (wlan0)
===================================
NAME IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
------------------------------------------------------------------------------------------------------
AP[1] 60:B3:25:25:E2:C8 wlan0-ap-3 Infrastruktura 1 54 Mb/s 55 ** WPA3
AP[2] 90:B1:5F:9E:E0:E3 wlan0-ap-1 Infrastruktura 1 54 Mb/s 44 ** WPA1
AP[3] 61:66:D2:E7:44:A2 wlan0-ap-2 Infrastruktura 1 54 Mb/s 34 ** WPA1 WPA2
<<<
size: 377
location: src/tests/client/test-client.py:test_002()/17
cmd: $NMCLI -f AP -mode tabular -t d show wlan0
lang: C
returncode: 0
stdout: 224 bytes
>>>
AP[1]: :60\:B3\:25\:25\:E2\:C8:wlan0-ap-3:Infra:1:54 Mbit/s:55:** :WPA3
AP[2]: :90\:B1\:5F\:9E\:E0\:E3:wlan0-ap-1:Infra:1:54 Mbit/s:44:** :WPA1
AP[3]: :61\:66\:D2\:E7\:44\:A2:wlan0-ap-2:Infra:1:54 Mbit/s:34:** :WPA1 WPA2
<<<
size: 414
location: src/tests/client/test-client.py:test_002()/18
cmd: $NMCLI -f AP -mode tabular -t d show wlan0
lang: pl_PL.UTF-8
returncode: 0
stdout: 251 bytes
>>>
AP[1]: :60\:B3\:25\:25\:E2\:C8:wlan0-ap-3:Infrastruktura:1:54 Mb/s:55:** :WPA3
AP[2]: :90\:B1\:5F\:9E\:E0\:E3:wlan0-ap-1:Infrastruktura:1:54 Mb/s:44:** :WPA1
AP[3]: :61\:66\:D2\:E7\:44\:A2:wlan0-ap-2:Infrastruktura:1:54 Mb/s:34:** :WPA1 WPA2
<<<
size: 2049
location: src/tests/client/test-client.py:test_002()/19
cmd: $NMCLI -f ALL d wifi
lang: C
returncode: 0
stdout: 1917 bytes
>>>
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
AP[1] wlan0-ap-3 776C616E302D61702D33 60:B3:25:25:E2:C8 Infra 1 2412 MHz 54 Mbit/s 40 MHz 55 ** WPA3 (none) pair_tkip pair_ccmp group_tkip group_ccmp sae wlan0 no /org/freedesktop/NetworkManager/AccessPoint/3
AP[2] wlan0-ap-1 776C616E302D61702D31 90:B1:5F:9E:E0:E3 Infra 1 2412 MHz 54 Mbit/s 40 MHz 44 ** WPA1 pair_tkip pair_ccmp group_tkip group_ccmp psk (none) wlan0 no /org/freedesktop/NetworkManager/AccessPoint/1
AP[3] wlan0-ap-2 776C616E302D61702D32 61:66:D2:E7:44:A2 Infra 1 2412 MHz 54 Mbit/s 40 MHz 34 ** WPA1 WPA2 pair_tkip pair_ccmp group_tkip group_ccmp psk pair_tkip pair_ccmp group_tkip group_ccmp psk wlan0 no /org/freedesktop/NetworkManager/AccessPoint/2
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
AP[1] wlan1-ap-4 776C616E312D61702D34 EE:52:8B:49:A1:96 Infra 1 2412 MHz 54 Mbit/s 40 MHz 38 ** WPA1 WPA2 pair_tkip pair_ccmp group_tkip group_ccmp psk pair_tkip pair_ccmp group_tkip group_ccmp psk wlan1 no /org/freedesktop/NetworkManager/AccessPoint/4
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
<<<
size: 2125
location: src/tests/client/test-client.py:test_002()/20
cmd: $NMCLI -f ALL d wifi
lang: pl_PL.UTF-8
returncode: 0
stdout: 1983 bytes
>>>
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
AP[1] wlan0-ap-3 776C616E302D61702D33 60:B3:25:25:E2:C8 Infrastruktura 1 2412 MHz 54 Mb/s 40 MHz 55 ** WPA3 (brak) pair_tkip pair_ccmp group_tkip group_ccmp sae wlan0 nie /org/freedesktop/NetworkManager/AccessPoint/3
AP[2] wlan0-ap-1 776C616E302D61702D31 90:B1:5F:9E:E0:E3 Infrastruktura 1 2412 MHz 54 Mb/s 40 MHz 44 ** WPA1 pair_tkip pair_ccmp group_tkip group_ccmp psk (brak) wlan0 nie /org/freedesktop/NetworkManager/AccessPoint/1
AP[3] wlan0-ap-2 776C616E302D61702D32 61:66:D2:E7:44:A2 Infrastruktura 1 2412 MHz 54 Mb/s 40 MHz 34 ** WPA1 WPA2 pair_tkip pair_ccmp group_tkip group_ccmp psk pair_tkip pair_ccmp group_tkip group_ccmp psk wlan0 nie /org/freedesktop/NetworkManager/AccessPoint/2
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
AP[1] wlan1-ap-4 776C616E312D61702D34 EE:52:8B:49:A1:96 Infrastruktura 1 2412 MHz 54 Mb/s 40 MHz 38 ** WPA1 WPA2 pair_tkip pair_ccmp group_tkip group_ccmp psk pair_tkip pair_ccmp group_tkip group_ccmp psk wlan1 nie /org/freedesktop/NetworkManager/AccessPoint/4
NAME SSID SSID-HEX BSSID MODE CHAN FREQ RATE BANDWIDTH SIGNAL BARS SECURITY WPA-FLAGS RSN-FLAGS DEVICE ACTIVE IN-USE DBUS-PATH
<<<
size: 245
location: src/tests/client/test-client.py:test_002()/21
cmd: $NMCLI c
lang: C
returncode: 0
stdout: 126 bytes
>>>
NAME UUID TYPE DEVICE
con-1 5fcfd6d7-1e63-3332-8826-a7eda103792d ethernet --
<<<
size: 255
location: src/tests/client/test-client.py:test_002()/22
cmd: $NMCLI c
lang: pl_PL.UTF-8
returncode: 0
stdout: 126 bytes
>>>
NAME UUID TYPE DEVICE
con-1 5fcfd6d7-1e63-3332-8826-a7eda103792d ethernet --
<<<
size: 1704
location: src/tests/client/test-client.py:test_002()/23
cmd: $NMCLI c s con-1
lang: C
returncode: 0
stdout: 1576 bytes
>>>
connection.id: con-1
connection.uuid: 5fcfd6d7-1e63-3332-8826-a7eda103792d
connection.stable-id: --
connection.type: 802-3-ethernet
connection.interface-name: --
connection.autoconnect: yes
connection.autoconnect-priority: 0
connection.autoconnect-retries: -1 (default)
connection.multi-connect: 0 (default)
connection.auth-retries: -1
connection.timestamp: 0
connection.permissions: --
connection.zone: --
connection.controller: --
connection.master: --
connection.slave-type: --
connection.port-type: --
connection.autoconnect-slaves: -1 (default)
connection.autoconnect-ports: -1 (default)
connection.down-on-poweroff: -1 (default)
connection.secondaries: --
connection.gateway-ping-timeout: 0
connection.ip-ping-timeout: 0
connection.ip-ping-addresses: --
connection.ip-ping-addresses-require-all:-1 (default)
connection.metered: unknown
connection.lldp: default
connection.mdns: -1 (default)
connection.llmnr: -1 (default)
connection.dns-over-tls: -1 (default)
connection.mptcp-flags: 0x0 (default)
connection.wait-device-timeout: -1
connection.wait-activation-delay: -1
<<<
size: 1715
location: src/tests/client/test-client.py:test_002()/24
cmd: $NMCLI c s con-1
lang: pl_PL.UTF-8
returncode: 0
stdout: 1577 bytes
>>>
connection.id: con-1
connection.uuid: 5fcfd6d7-1e63-3332-8826-a7eda103792d
connection.stable-id: --
connection.type: 802-3-ethernet
connection.interface-name: --
connection.autoconnect: tak
connection.autoconnect-priority: 0
connection.autoconnect-retries: -1 (default)
connection.multi-connect: 0 (default)
connection.auth-retries: -1
connection.timestamp: 0
connection.permissions: --
connection.zone: --
connection.controller: --
connection.master: --
connection.slave-type: --
connection.port-type: --
connection.autoconnect-slaves: -1 (default)
connection.autoconnect-ports: -1 (default)
connection.down-on-poweroff: -1 (default)
connection.secondaries: --
connection.gateway-ping-timeout: 0
connection.ip-ping-timeout: 0
connection.ip-ping-addresses: --
connection.ip-ping-addresses-require-all:-1 (default)
connection.metered: nieznane
connection.lldp: default
connection.mdns: -1 (default)
connection.llmnr: -1 (default)
connection.dns-over-tls: -1 (default)
connection.mptcp-flags: 0x0 (default)
connection.wait-device-timeout: -1
connection.wait-activation-delay: -1
<<<
Reference in a new issue View git blame Copy permalink