NetworkManager/src/core/nm-act-request.c
Thomas Haller 58287cbcc0 core: rework IP configuration in NetworkManager using layer 3 configuration
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.

This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.

It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.

Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
2021-11-18 16:21:29 +01:00

508 lines
17 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2005 - 2012 Red Hat, Inc.
* Copyright (C) 2007 - 2008 Novell, Inc.
*/
#include "src/core/nm-default-daemon.h"
#include "nm-act-request.h"
#include <stdlib.h>
#include <sys/wait.h>
#include <unistd.h>
#include "c-list/src/c-list.h"
#include "libnm-core-aux-intern/nm-auth-subject.h"
#include "nm-setting-8021x.h"
#include "nm-setting-wireless-security.h"
#include "devices/nm-device.h"
#include "nm-active-connection.h"
#include "nm-firewall-utils.h"
#include "settings/nm-settings-connection.h"
typedef struct {
CList call_ids_lst_head;
} NMActRequestPrivate;
struct _NMActRequest {
NMActiveConnection parent;
NMActRequestPrivate _priv;
};
typedef struct {
NMActiveConnectionClass parent;
} NMActRequestClass;
enum {
PROP_0,
PROP_IP4_CONFIG,
PROP_DHCP4_CONFIG,
PROP_IP6_CONFIG,
PROP_DHCP6_CONFIG,
LAST_PROP
};
G_DEFINE_TYPE(NMActRequest, nm_act_request, NM_TYPE_ACTIVE_CONNECTION)
#define NM_ACT_REQUEST_GET_PRIVATE(self) _NM_GET_PRIVATE(self, NMActRequest, NM_IS_ACT_REQUEST)
/*****************************************************************************/
NMSettingsConnection *
nm_act_request_get_settings_connection(NMActRequest *req)
{
g_return_val_if_fail(NM_IS_ACT_REQUEST(req), NULL);
return nm_active_connection_get_settings_connection(NM_ACTIVE_CONNECTION(req));
}
NMConnection *
nm_act_request_get_applied_connection(NMActRequest *req)
{
g_return_val_if_fail(NM_IS_ACT_REQUEST(req), NULL);
return nm_active_connection_get_applied_connection(NM_ACTIVE_CONNECTION(req));
}
/*****************************************************************************/
struct _NMActRequestGetSecretsCallId {
CList call_ids_lst;
NMActRequest * self;
NMActRequestSecretsFunc callback;
gpointer callback_data;
NMSettingsConnectionCallId *call_id;
bool has_ref;
};
static void
_get_secrets_call_id_free(NMActRequestGetSecretsCallId *call_id)
{
nm_assert(call_id);
nm_assert(!c_list_is_linked(&call_id->call_ids_lst));
if (call_id->has_ref)
g_object_unref(call_id->self);
g_slice_free(NMActRequestGetSecretsCallId, call_id);
}
static void
get_secrets_cb(NMSettingsConnection * connection,
NMSettingsConnectionCallId *call_id_s,
const char * agent_username,
const char * setting_name,
GError * error,
gpointer user_data)
{
NMActRequestGetSecretsCallId *call_id = user_data;
NMActRequestPrivate * priv;
g_return_if_fail(call_id && call_id->call_id == call_id_s);
g_return_if_fail(NM_IS_ACT_REQUEST(call_id->self));
if (g_error_matches(error, G_IO_ERROR, G_IO_ERROR_CANCELLED))
return;
priv = NM_ACT_REQUEST_GET_PRIVATE(call_id->self);
nm_assert(c_list_contains(&priv->call_ids_lst_head, &call_id->call_ids_lst));
c_list_unlink(&call_id->call_ids_lst);
if (call_id->callback)
call_id->callback(call_id->self, call_id, connection, error, call_id->callback_data);
_get_secrets_call_id_free(call_id);
}
/**
* nm_act_request_get_secrets:
* @self:
* @ref_self: if %TRUE, the pending call take a reference on @self.
* It also allows you to omit the @self argument in nm_act_request_cancel_secrets().
* @setting_name:
* @flags:
* @hint:
* @callback:
* @callback_data:
*
* Asynchronously starts the request for secrets. This function cannot
* fail.
*
* The return call-id can be used to cancel the request. You are
* only allowed to cancel a still pending operation (once).
* The callback will always be invoked once, even for canceling
* or disposing of NMActRequest.
*
* Returns: a call-id.
*/
NMActRequestGetSecretsCallId *
nm_act_request_get_secrets(NMActRequest * self,
gboolean ref_self,
const char * setting_name,
NMSecretAgentGetSecretsFlags flags,
const char *const * hints,
NMActRequestSecretsFunc callback,
gpointer callback_data)
{
NMActRequestPrivate * priv;
NMActRequestGetSecretsCallId *call_id;
NMSettingsConnectionCallId * call_id_s;
NMSettingsConnection * settings_connection;
NMConnection * applied_connection;
g_return_val_if_fail(NM_IS_ACT_REQUEST(self), NULL);
priv = NM_ACT_REQUEST_GET_PRIVATE(self);
settings_connection = nm_act_request_get_settings_connection(self);
applied_connection = nm_act_request_get_applied_connection(self);
call_id = g_slice_new0(NMActRequestGetSecretsCallId);
call_id->has_ref = ref_self;
call_id->self = ref_self ? g_object_ref(self) : self;
call_id->callback = callback;
call_id->callback_data = callback_data;
c_list_link_tail(&priv->call_ids_lst_head, &call_id->call_ids_lst);
if (nm_active_connection_get_user_requested(NM_ACTIVE_CONNECTION(self)))
flags |= NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED;
call_id_s = nm_settings_connection_get_secrets(
settings_connection,
applied_connection,
nm_active_connection_get_subject(NM_ACTIVE_CONNECTION(self)),
setting_name,
flags,
hints,
get_secrets_cb,
call_id);
call_id->call_id = call_id_s;
g_return_val_if_fail(call_id_s, NULL);
return call_id;
}
static void
_do_cancel_secrets(NMActRequest *self, NMActRequestGetSecretsCallId *call_id, gboolean is_disposing)
{
NMActRequestPrivate *priv = NM_ACT_REQUEST_GET_PRIVATE(self);
nm_assert(call_id && call_id->self == self);
nm_assert(c_list_contains(&priv->call_ids_lst_head, &call_id->call_ids_lst));
c_list_unlink(&call_id->call_ids_lst);
nm_settings_connection_cancel_secrets(nm_act_request_get_settings_connection(self),
call_id->call_id);
if (call_id->callback) {
gs_free_error GError *error = NULL;
nm_utils_error_set_cancelled(&error, is_disposing, "NMActRequest");
call_id->callback(self, call_id, NULL, error, call_id->callback_data);
}
_get_secrets_call_id_free(call_id);
}
/**
* nm_act_request_cancel_secrets:
* @self: The #NMActRequest. Note that this argument can be %NULL if, and only if
* the call_id was created with @take_ref.
* @call_id:
*
* You are only allowed to cancel the call once, and only before the callback
* is already invoked. Note that cancelling causes the callback to be invoked
* synchronously.
*/
void
nm_act_request_cancel_secrets(NMActRequest *self, NMActRequestGetSecretsCallId *call_id)
{
g_return_if_fail(call_id);
if (self) {
g_return_if_fail(NM_IS_ACT_REQUEST(self));
g_return_if_fail(self == call_id->self);
} else {
g_return_if_fail(call_id->has_ref);
g_return_if_fail(NM_IS_ACT_REQUEST(call_id->self));
self = call_id->self;
}
if (!c_list_is_linked(&call_id->call_ids_lst))
g_return_if_reached();
_do_cancel_secrets(self, call_id, FALSE);
}
void
nm_act_request_clear_secrets(NMActRequest *self)
{
g_return_if_fail(NM_IS_ACT_REQUEST(self));
nm_active_connection_clear_secrets((NMActiveConnection *) self);
}
/*****************************************************************************/
static void
device_notify(GObject *object, GParamSpec *pspec, gpointer self)
{
g_object_notify(self, pspec->name);
}
static void
device_state_changed(NMActiveConnection *active,
NMDevice * device,
NMDeviceState new_state,
NMDeviceState old_state)
{
NMActiveConnectionState cur_ac_state = nm_active_connection_get_state(active);
NMActiveConnectionState ac_state = NM_ACTIVE_CONNECTION_STATE_UNKNOWN;
NMActiveConnectionStateReason ac_state_reason = NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN;
/* Decide which device state changes to handle when this active connection
* is not the device's current request. Two cases here: (a) the AC is
* pending and not yet active, and (b) the AC was active but the device is
* entering DISCONNECTED state (which clears the device's current AC before
* emitting the state change signal).
*/
if (NM_ACTIVE_CONNECTION(nm_device_get_act_request(device)) != active) {
/* Some other request is activating; this one must be pending */
if (new_state >= NM_DEVICE_STATE_PREPARE)
return;
else if (new_state == NM_DEVICE_STATE_DISCONNECTED) {
/* This request hasn't started activating yet; the device is
* disconnecting and cleaning up a previous activation request.
*/
if (cur_ac_state < NM_ACTIVE_CONNECTION_STATE_ACTIVATING)
return;
/* Catch device disconnections after this request has been active */
}
/* All states < DISCONNECTED are fatal and handled */
}
/* Set NMActiveConnection state based on the device's state */
switch (new_state) {
case NM_DEVICE_STATE_PREPARE:
case NM_DEVICE_STATE_CONFIG:
case NM_DEVICE_STATE_NEED_AUTH:
case NM_DEVICE_STATE_IP_CONFIG:
case NM_DEVICE_STATE_IP_CHECK:
case NM_DEVICE_STATE_SECONDARIES:
ac_state = NM_ACTIVE_CONNECTION_STATE_ACTIVATING;
break;
case NM_DEVICE_STATE_ACTIVATED:
ac_state = NM_ACTIVE_CONNECTION_STATE_ACTIVATED;
g_signal_connect(device,
"notify::" NM_DEVICE_IP4_CONFIG,
G_CALLBACK(device_notify),
active);
g_signal_connect(device,
"notify::" NM_DEVICE_DHCP4_CONFIG,
G_CALLBACK(device_notify),
active);
g_signal_connect(device,
"notify::" NM_DEVICE_IP6_CONFIG,
G_CALLBACK(device_notify),
active);
g_signal_connect(device,
"notify::" NM_DEVICE_DHCP6_CONFIG,
G_CALLBACK(device_notify),
active);
break;
case NM_DEVICE_STATE_DEACTIVATING:
ac_state = NM_ACTIVE_CONNECTION_STATE_DEACTIVATING;
break;
case NM_DEVICE_STATE_FAILED:
case NM_DEVICE_STATE_DISCONNECTED:
case NM_DEVICE_STATE_UNMANAGED:
case NM_DEVICE_STATE_UNAVAILABLE:
ac_state = NM_ACTIVE_CONNECTION_STATE_DEACTIVATED;
ac_state_reason = NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED;
g_signal_handlers_disconnect_by_func(device, G_CALLBACK(device_notify), active);
break;
default:
break;
}
if (ac_state == NM_ACTIVE_CONNECTION_STATE_DEACTIVATED
|| ac_state == NM_ACTIVE_CONNECTION_STATE_UNKNOWN)
nm_active_connection_set_default(active, AF_UNSPEC, FALSE);
nm_active_connection_set_state(active, ac_state, ac_state_reason);
}
static void
master_failed(NMActiveConnection *self)
{
NMDevice * device;
NMDeviceState device_state;
/* If the connection has an active device, fail it */
device = nm_active_connection_get_device(self);
if (device) {
device_state = nm_device_get_state(device);
if (nm_device_is_activating(device) || (device_state == NM_DEVICE_STATE_ACTIVATED)) {
nm_device_queue_state(device,
NM_DEVICE_STATE_FAILED,
NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED);
return;
}
}
/* If no device, or the device wasn't active, just move to deactivated state */
nm_active_connection_set_state(self,
NM_ACTIVE_CONNECTION_STATE_DEACTIVATED,
NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED);
}
/*****************************************************************************/
static void
get_property(GObject *object, guint prop_id, GValue *value, GParamSpec *pspec)
{
NMActiveConnection *active;
NMDevice * device;
char * name;
switch (prop_id) {
case PROP_IP4_CONFIG:
name = NM_DEVICE_IP4_CONFIG;
break;
case PROP_DHCP4_CONFIG:
name = NM_DEVICE_DHCP4_CONFIG;
break;
case PROP_IP6_CONFIG:
name = NM_DEVICE_IP6_CONFIG;
break;
case PROP_DHCP6_CONFIG:
name = NM_DEVICE_DHCP6_CONFIG;
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID(object, prop_id, pspec);
return;
}
active = NM_ACTIVE_CONNECTION(object);
device = nm_active_connection_get_device(active);
if (!device
|| !NM_IN_SET(nm_active_connection_get_state(active),
NM_ACTIVE_CONNECTION_STATE_ACTIVATED,
NM_ACTIVE_CONNECTION_STATE_DEACTIVATING)) {
g_value_set_string(value, NULL);
return;
}
g_object_get_property(G_OBJECT(device), name, value);
}
static void
nm_act_request_init(NMActRequest *req)
{
NMActRequestPrivate *priv = NM_ACT_REQUEST_GET_PRIVATE(req);
c_list_init(&priv->call_ids_lst_head);
}
/**
* nm_act_request_new:
*
* @settings_connection: (allow-none): the connection to activate @device with
* @applied_connection: (allow-none): the applied connection
* @specific_object: the object path of the specific object (ie, Wi-Fi access point,
* etc) that will be used to activate @connection and @device
* @subject: the #NMAuthSubject representing the requestor of the activation
* @activation_type: the #NMActivationType
* @activation_reason: the reason for activation
* @initial_state_flags: the initial state flags.
* @device: the device/interface to configure according to @connection
*
* Creates a new device-based activation request. If an applied connection is
* supplied, it shall not be modified by the caller afterwards.
*
* Returns: the new activation request on success, %NULL on error.
*/
NMActRequest *
nm_act_request_new(NMSettingsConnection * settings_connection,
NMConnection * applied_connection,
const char * specific_object,
NMAuthSubject * subject,
NMActivationType activation_type,
NMActivationReason activation_reason,
NMActivationStateFlags initial_state_flags,
NMDevice * device)
{
g_return_val_if_fail(!settings_connection || NM_IS_SETTINGS_CONNECTION(settings_connection),
NULL);
g_return_val_if_fail(NM_IS_DEVICE(device), NULL);
g_return_val_if_fail(NM_IS_AUTH_SUBJECT(subject), NULL);
return g_object_new(NM_TYPE_ACT_REQUEST,
NM_ACTIVE_CONNECTION_INT_APPLIED_CONNECTION,
applied_connection,
NM_ACTIVE_CONNECTION_INT_SETTINGS_CONNECTION,
settings_connection,
NM_ACTIVE_CONNECTION_INT_DEVICE,
device,
NM_ACTIVE_CONNECTION_SPECIFIC_OBJECT,
specific_object,
NM_ACTIVE_CONNECTION_INT_SUBJECT,
subject,
NM_ACTIVE_CONNECTION_INT_ACTIVATION_TYPE,
(int) activation_type,
NM_ACTIVE_CONNECTION_INT_ACTIVATION_REASON,
(int) activation_reason,
NM_ACTIVE_CONNECTION_STATE_FLAGS,
(guint) initial_state_flags,
NULL);
}
static void
dispose(GObject *object)
{
NMActRequest * self = NM_ACT_REQUEST(object);
NMActRequestPrivate * priv = NM_ACT_REQUEST_GET_PRIVATE(self);
NMActRequestGetSecretsCallId *call_id, *call_id_safe;
/* Kill any in-progress secrets requests */
c_list_for_each_entry_safe (call_id, call_id_safe, &priv->call_ids_lst_head, call_ids_lst)
_do_cancel_secrets(self, call_id, TRUE);
G_OBJECT_CLASS(nm_act_request_parent_class)->dispose(object);
}
static void
nm_act_request_class_init(NMActRequestClass *req_class)
{
GObjectClass * object_class = G_OBJECT_CLASS(req_class);
NMActiveConnectionClass *active_class = NM_ACTIVE_CONNECTION_CLASS(req_class);
/* virtual methods */
object_class->dispose = dispose;
object_class->get_property = get_property;
active_class->master_failed = master_failed;
active_class->device_state_changed = device_state_changed;
/* properties */
g_object_class_override_property(object_class,
PROP_IP4_CONFIG,
NM_ACTIVE_CONNECTION_IP4_CONFIG);
g_object_class_override_property(object_class,
PROP_DHCP4_CONFIG,
NM_ACTIVE_CONNECTION_DHCP4_CONFIG);
g_object_class_override_property(object_class,
PROP_IP6_CONFIG,
NM_ACTIVE_CONNECTION_IP6_CONFIG);
g_object_class_override_property(object_class,
PROP_DHCP6_CONFIG,
NM_ACTIVE_CONNECTION_DHCP6_CONFIG);
}