- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
A GObject interface, like a class, has two different C types
associated with it; the type of the "class" struct (eg, GObjectClass,
GFileIface), and the type of instances of that class/interface (eg,
GObject, GFile).
NetworkManager was doing this wrong though, and using the same C type
to point to both the interface's class struct and to instances of the
interface. This ends up not actually breaking anything, since for
interface types, the instance type is a non-dereferenceable dummy type
anyway. But it's wrong, since if, eg, NMDeviceFactory is a struct type
containing members "start", "device_added", etc, then you should not
be using an NMDeviceFactory* to point to an object that does not
contain those members.
Fix this by splitting NMDeviceFactory into NMDeviceFactoryInterface
and NMDeviceFactory; by splitting NMConnectionProvider into
NMConnectionProviderInterface and NMConnectionProvider; and by
splitting NMSettingsPlugin into NMSettingsPluginInterface and
NMSettingsPlugin; and then use the right types in the right places.
As a bonus, this also lets us now use G_DEFINE_INTERFACE.
Since there have not been separate system and user settings services
since 0.8, the "system" in NMSystemConfigInterface is kind of
meaningless. Rename it to NMSettingsPlugin, which describes what it
does better.
This is just:
git mv src/settings/nm-system-config-interface.h src/settings/nm-settings-plugin.h
git mv src/settings/nm-system-config-interface.c src/settings/nm-settings-plugin.c
perl -pi -e 's/SystemConfigInterface/SettingsPlugin/g;' \
-e 's/system_config_interface/settings_plugin/g;' \
-e 's/system-config-interface/settings-plugin/g;' \
-e 's/SYSTEM_CONFIG_INTERFACE/SETTINGS_PLUGIN/g;' \
-e 's/sc_plugin/settings_plugin/g;' \
-e 's/SC_PLUGIN/SETTINGS_PLUGIN/g;' \
-e 's/SC_IS_PLUGIN/SETTINGS_IS_PLUGIN/g;' \
-e 's/SC_TYPE_PLUGIN/SETTINGS_TYPE_PLUGIN/g;' \
-e 's/SCPlugin/SettingsPlugin/g;' \
-e 's/nm_system_config_factory/nm_settings_plugin_factory/g;' \
$(find src/settings -type f)
(followed by some whitespace fixups in nm-settings-plugin.c, and a
Makefile.am fix for the rename)
Advantages:
- use current best-pratice
- registers a weak-ref to clear @singleton_instance when the
instance gets destroyed
- logs creation and destruction of singleton
- on shutdown, destroy the singleton instance via
_nm_singleton_instance_register_destruction(). Note, that
we now have yet another reference to the singleton that is
owned by register-destruction.
Port remaining bits to gdbus and remove stray dbus-glib references
Drop the dbus-glib version check from configure, since nothing depends
on new dbus-glib any more.
Move nm-dbus-glib-types.h and nm-gvaluearray-compat.h from include/ to
libnm-util/ since they are now only used by libnm-util and libnm-glib.
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
This internal header file should be included by our internal source
code files and header files. It includes in one place other headers
that constitute to a minimal set of required headers. Most notably
this is <glib.h> and our "nm-glib.h" header.
Note that public header files and example source code cannot include
this file as "nm-default.h" is internal only.
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
Originally, if you change the ID of a connection,
the existing keyfile will not be renamed. That means
after renaming a connection, it's keyfile name will
mismatch.
Now, when th user modifies a connection via D-Bus and changes
the connection it, rename the file.
https://bugzilla.gnome.org/show_bug.cgi?id=740738
Some plugins had their local defines for the name of the sections and
keys in NMConfig. Move those defines to "nm-config.h".
Usually plugins make use of code in core, but not the other
way round. Defining the names inside "nm-config.h" is no violation of
that because the config section names are anyway not local to the
plugin, but global in the shared name-space with other settings.
For example, another plugins shouldn't reuse the section "ifnet".
For that reason, it is correct and consistent to move these defines
to "nm-config.h".
We don't use those names in core, we merely signal their existance.
With GCC 5, -Wlogical-not-parentheses is enabled by -Wall and warns
about suspicious code like:
int a;
...
if (!a > 1) { ... }
Fix the following warning:
test_all.c: In function ‘test_is_static’:
test_all.c:114:32: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
ASSERT (!is_static_ip6 ("eth0") == TRUE, "is static",
^
Most nm_platform_*() functions operate on the platform
singleton nm_platform_get(). That made sense because the
NMPlatform instance was mainly to hook fake platform for
testing.
While the implicit argument saved some typing, I think explicit is
better. Especially, because NMPlatform could become a more usable
object then just a hook for testing.
With this change, NMPlatform instances can be used individually, not
only as a singleton instance.
Before this change, the constructor of NMLinuxPlatform could not
call any nm_platform_*() functions because the singleton was not
yet initialized. We could only instantiate an incomplete instance,
register it via nm_platform_setup(), and then complete initialization
via singleton->setup().
With this change, we can create and fully initialize NMPlatform instances
before/without setting them up them as singleton.
Also, currently there is no clear distinction between functions
that operate on the NMPlatform instance, and functions that can
be used stand-alone (e.g. nm_platform_ip4_address_to_string()).
The latter can not be mocked for testing. With this change, the
distinction becomes obvious. That is also useful because it becomes
clearer which functions make use of the platform cache and which not.
Inside nm-linux-platform.c, continue the pattern that the
self instance is named @platform. That makes sense because
its type is NMPlatform, and not NMLinuxPlatform what we
would expect from a paramter named @self.
This is a major diff that causes some pain when rebasing. Try
to rebase to the parent commit of this commit as a first step.
Then rebase on top of this commit using merge-strategy "ours".
Before, when having a test with nmtst_init_assert_logging(),
the caller was expected to setup logging separately according
to the log level that the test asserts against.
Since 5e74891b58, the logging
level can be reset via NMTST_DEBUG also for tests that
assert logging. In this case, it would be useful, if the test
would not overwrite the logging level that is set externally
via NMTST_DEBUG.
Instead, let the test pass the logging configuration to
nmtst_init_assert_logging(), and nmtst will setup logging
-- either according to NMTST_DEBUG or as passed in.
This way, setting the log level works also for no-expect-message
tests:
NMTST_DEBUG="debug,no-expect-message,log-level=TRACE" $TEST
When adding a connection to NMSettings we did not check for
duplicate connection UUIDs (which could for example happen
if two different plugins report a conflicting UUID).
Also, we would not check that an already added connection
changes it's UUID.
Both could lead to have duplicate connections (by UUID).
Avoid that two ways:
- when adding a connection to NMSettings, ensure that we don't add
a conflicting UUID. Otherwise just bail out and do nothing.
- when modifying a connection that is already added to NMSettings,
enforce that the UUID cannot change. Otherwise fail with error.
For ifcfg-rh plugin this situation still can happen during reload.
In this case error out and refuse to update the connection. After
all, the user configured invalid UUIDs.
https://bugzilla.redhat.com/show_bug.cgi?id=1171751
Only log connection diffs when we update a connection that we actually
care about.
Note that most plugin specific connections use
nm_settings_connection_replace_settings() in their constructor
to initialize themselves. These occurrences are not interesting
and spam the logfile.
conn_name can be NULL now as the connections are tracked by UUID
(see commit 689dadaffb)
Sep 29 21:20:34 Jdeapad NetworkManager[1339]: <info> getting unmanaged specs...
Sep 29 21:20:34 Jdeapad NetworkManager[1339]: <info> Checking unmanaged: (null)
Sep 29 21:20:38 Jdeapad kernel: NetworkManager[1339]: segfault at 0 ip
00007f1bfffbedd0 sp 00007fff98daa628 error 4 in
libglib-2.0.so.0.4002.0[7f1bfff86000+130000]
https://bugzilla.gnome.org/show_bug.cgi?id=737645
There are different types (variants) of UUIDs defined.
Especially variants 3 and 5 are name based variants (rfc4122).
The way we create our UUIDs in nm_utils_uuid_generate_from_string()
however does not create them according to RFC and does not set
the flags to indicate the variant.
Modify the signature of nm_utils_uuid_generate_from_string() to accept
a "uuid_type" argument, so that we later can add other algorithms without
breaking API.
NMIPRoute is used by NMSettingIPConfig, but also
NMIPConfig. In the former case, default routes are (still)
disallowed. But in the NMIPConfig use-case, it can make sense
to expose default routes as NMIPRoute instances.
Relax the restriction on the NMIPRoute API to allow this
future change.
No code actually supports having NMIPRoute instances with
prefix length zero (default routes). Up to now, all such uses
would be a bug.
https://bugzilla.gnome.org/show_bug.cgi?id=739969
Signed-off-by: Thomas Haller <thaller@redhat.com>
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
Make the type return GBytes since most in-tree users want that.
Allow the function to accept many more formats as valid hex, including
bytes delimited by ':' and a leading '0x'.
The gateway is a global property of the IPv4/IPv6 configuration, not
an attribute of any particular address. So represent it as such in the
API; remove the gateway from NMIPAddress, and add it to
NMSettingIPConfig.
Behind the scenes, the gateway is still serialized along with the
first address in NMSettingIPConfig:addresses, and is deserialized from
that if the settings dictionary doesn't contain a 'gateway' key.
Adjust nmcli's interactive mode to prompt for IP addresses and gateway
separately. (Patch partly from Jirka Klimeš.)
NMSettingIP[46]Config let you associate a gateway with each address,
and the writable settings backends record that information. But it
never actually gets used: NMIP4Config and NMIP6Config only ever use
the first gateway, and completely ignore any others. (And in the
common usage of the term, an interface can only have one gateway
anyway.)
So, stop pretending that multiple gateways are meaningful; don't
serialize or deserialize gateways other than the first in the
'addresses' properties, and don't read or write multiple gateway
values either.
Split a base NMSettingIPConfig class out of NMSettingIP4Config and
NMSettingIP6Config, and update things accordingly.
Further simplifications of now-redundant IPv4-vs-IPv6 code are
possible, and should happen in the future.
Merge NMIP4Address and NMIP6Address into NMIPAddress, and NMIP4Route
and NMIP6Route into NMIPRoute. The new types represent IP addresses as
strings, rather than in binary, and so are address-family agnostic.
Add nm-core-types.h, typedefing all of the GObject types in
libnm-core; this is needed so that nm-setting.h can reference
NMConnection in addition to nm-connection.h referencing NMSetting.
Removing the cross-includes from the various headers causes lots of
fallout elsewhere. (In particular, nm-utils.h used to include
nm-connection.h, which included every setting header, so any file that
included nm-utils.h automatically got most of the rest of libnm-core
without needing to pay attention to specifics.) Fix this up by
including nm-core-internal.h from those files that are now missing
includes.
Each plugin defined its own error domain, though none actually defined
any errors. Replace these with appropriate uses of
NM_SETTINGS_ERROR_INVALID_CONNECTION and NM_SETTINGS_ERROR_FAILED.
Move the definition of NMSettingsError to nm-errors, register it with
D-Bus, and verify in the tests that it maps correctly.
Remove a few unused error codes, simplify a few others, and rename
GENERAL to FAILED and HOSTNAME_INVALID to INVALID_HOSTNAME, for
consistency.
When secret providers return the connection hash in GetSecrets(),
this hash should only contain secrets. However, some providers also
return non-secret properties.
for_each_secret() iterated over all entries of the @secrets hash
and triggered the assertion in nm_setting_get_secret_flags() (see
below).
NM should not assert against user provided input. Change
nm_setting_get_secret_flags() to silently return FALSE, if the property
is not a secret.
Indeed, handling of secrets is very different for NMSettingVpn and
others. Hence nm_setting_get_secret_flags() has only an inconsistent
behavior and we have to fix all call sites to do the right thing
(depending on whether we have a VPN setting or not).
Now for_each_secret() checks whether the property is a secret
without hitting the assertion. Adjust all other calls of
nm_setting_get_secret_flags(), to anticipate non-secret flags and
assert/warn where appropriate.
Also, agent_secrets_done_cb() clears now all non-secrets properties
from the hash, using the new argument @remove_non_secrets when calling
for_each_secret().
#0 0x0000003370c504e9 in g_logv () from /lib64/libglib-2.0.so.0
#1 0x0000003370c5063f in g_log () from /lib64/libglib-2.0.so.0
#2 0x00007fa4b0c1c156 in get_secret_flags (setting=0x1e3ac60, secret_name=0x1ea9180 "security", verify_secret=1, out_flags=0x7fff7507857c, error=0x0) at nm-setting.c:1091
#3 0x00007fa4b0c1c2b2 in nm_setting_get_secret_flags (setting=0x1e3ac60, secret_name=0x1ea9180 "security", out_flags=0x7fff7507857c, error=0x0) at nm-setting.c:1124
#4 0x0000000000463d03 in for_each_secret (connection=0x1deb2f0, secrets=0x1e9f860, callback=0x464f1b <has_system_owned_secrets>, callback_data=0x7fff7507865c) at settings/nm-settings-connection.c:203
#5 0x000000000046525f in agent_secrets_done_cb (manager=0x1dddf50, call_id=1, agent_dbus_owner=0x1ddb9e0 ":1.39", agent_username=0x1e51710 "thom", agent_has_modify=1, setting_name=0x1e91f90 "802-11-wireless-security",
flags=NM_SETTINGS_GET_SECRETS_FLAG_ALLOW_INTERACTION, secrets=0x1e9f860, error=0x0, user_data=0x1deb2f0, other_data2=0x477d61 <get_secrets_cb>, other_data3=0x1ea92a0) at settings/nm-settings-connection.c:757
#6 0x00000000004dc4fd in get_complete_cb (parent=0x1ea6300, secrets=0x1e9f860, agent_dbus_owner=0x1ddb9e0 ":1.39", agent_username=0x1e51710 "thom", error=0x0, user_data=0x1dddf50) at settings/nm-agent-manager.c:1139
#7 0x00000000004dab54 in req_complete_success (req=0x1ea6300, secrets=0x1e9f860, agent_dbus_owner=0x1ddb9e0 ":1.39", agent_uname=0x1e51710 "thom") at settings/nm-agent-manager.c:502
#8 0x00000000004db86e in get_done_cb (agent=0x1e89530, call_id=0x1, secrets=0x1e9f860, error=0x0, user_data=0x1ea6300) at settings/nm-agent-manager.c:856
#9 0x00000000004de9d0 in get_callback (proxy=0x1e47530, call=0x1, user_data=0x1ea10f0) at settings/nm-secret-agent.c:267
#10 0x000000337380cad2 in complete_pending_call_and_unlock () from /lib64/libdbus-1.so.3
#11 0x000000337380fdc1 in dbus_connection_dispatch () from /lib64/libdbus-1.so.3
#12 0x000000342800ad65 in message_queue_dispatch () from /lib64/libdbus-glib-1.so.2
#13 0x0000003370c492a6 in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#14 0x0000003370c49628 in g_main_context_iterate.isra.24 () from /lib64/libglib-2.0.so.0
#15 0x0000003370c49a3a in g_main_loop_run () from /lib64/libglib-2.0.so.0
#16 0x000000000042e5c6 in main (argc=1, argv=0x7fff75078e88) at main.c:644
Signed-off-by: Thomas Haller <thaller@redhat.com>
- fix memleaks if the script contains duplicate lines
- only accept either dhclient or dhcpcd syntax, depending
on the file
- be more strikt in parsing:
- don't use strstr() when parsing dhcpcd.conf. It wrongly
accepts "# send dhcp-client-identifier".
- enfore that keyword are terminated by space. Would no longer
accept "hostnameHOSTNAME"
- be less strict in parsing:
- accept any number of spaces between "send" and "host-name"/
"dhcp-client-identifier"
https://bugzilla.gnome.org/show_bug.cgi?id=738125
Signed-off-by: Thomas Haller <thaller@redhat.com>
