For ipv6.method=dhcp NM was not waiting for an IPv6LL address, which
caused the DHCP client to exit early because it had no local address
to bind to.
https://bugzilla.gnome.org/show_bug.cgi?id=740147
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
It is conditionally compiled depending on presence of bluez-libs.
Results in undefined symbols:
NetworkManager[19346]: <warn> (/libnm-device-plugin-bluetooth.so): failed to
load plugin: /usr/lib64/NetworkManager/libnm-device-plugin-bluetooth.so:
undefined symbol: nm_bluez5_dun_cleanup
When quitting, the Manager asks each device to spawn the interface helper,
which persists and manages dynamic address on the interface after NetworkManager
is gone. If the dynamic address cannot be maintaned, the helper quits and
the interface's address may be removed when their lifetime runs out.
To keep the helper as simple as possible, NetworkManager passes most of the
configuration on the command-line, including some properties of the device's
current state, which are necessary for the helper to maintain DHCP leases
or IPv6 SLAAC addresses.
Really only used by systemd because it doesn't have as good lease
handling, but it's also necessary if we switch DHCP clients mid-stream
(which we'll be doing later) since the new DHCP client won't
have a lease file for the current IP address, and thus has nowhere
to pull the current IP address from to request the same address
from the DHCP server.
We'll ever have WWAN devices with a NULL gateway because the IPv6 over
WWAN still uses router advertisements to get a prefix. Thus you'll
always have a gateway if the device has real IPv6 connectivity.
For the IPv4 case, we still allow default routes without gateway on
WWAN.
https://bugzilla.gnome.org/show_bug.cgi?id=735512
Signed-off-by: Thomas Haller <thaller@redhat.com>
Up to now, NMPolicy would iterate over all devices to find the "best"
device and assign the default route to that device.
A better approach is to add a default route to *all* devices that
are never-default=no. The relative priority is choosen according to
the route metrics.
If two devices receive the same metric, we want to prefer the device
that activates first. That way, the default route sticks to the same
device until a better device activates or the device deactivates.
Hence, the order of activation is imporant in this case (as it is
already now).
Also, if several devices have identical metrics, increment their
metrics so that every metric is unique.
This makes the routing deterministic according to what we choose as best
device.
A special case is assumed devices. In this case we cannot adjust the metric
in face of equal metrics.
Add a new singleton class NMDefaultRouteManager that has a list of all
devices and their default routes. The manager will order the devices by
their priority and configure the routes using platform.
Also update the metric for VPN connections. Later we will track VPN
routes also via NMDefaultRouteManager. For now, fix the VPN metric because
otherwise VPNs would always get metric 1024 (which is usually much larger then the
device metrics).
https://bugzilla.gnome.org/show_bug.cgi?id=735512
Signed-off-by: Thomas Haller <thaller@redhat.com>
Make use of the new setting nm_setting_ip_config_get_route_metric()
If set, this override the route metric determined based on the device
type.
Similarly for VPN also prefer the setting from the connection. Thereby change
the default priority (for VPN that have their own device) to NM_VPN_ROUTE_METRIC_DEFAULT
instead of NM_PLATFORM_ROUTE_METRIC_DEFAULT. The latter would be a very
low priority compared to the default metrics for devices.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Before, we would always call unanimously nm_device_get_priority()
to get the default route metric for a device. Add new functions
nm_device_get_ip4_route_priority() and nm_device_get_ip6_route_priority()
and use them at the proper places.
Also add new function nm_vpn_connection_get_ip4_route_metric() and
nm_vpn_connection_get_ip6_route_metric().
Signed-off-by: Thomas Haller <thaller@redhat.com>
nm_device_get_priority() is used to select the "best" device
for the default route. The absolute values don't matter
at that point and the relative ordering is not changed by
this patch.
It is also directly used for route priority/metric. As we soon
allow the user to overwrite the setting, we want to get more
space between the individual device-types.
That way, a user could overwrite the default metric for a wifi
device to be 109 (making it lower then the default value 110), but
still less preferred then other non-wifi types.
Obviously, this patch is a visible change of behavior as now
routes get different metrics assigned.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Now that NMSettingIP6Config inherits the dhcp-send-hostname property
from NMSettingIPConfig, fix things up so that it actually gets used.
(Note that this changes behavior: previously if ip6.dhcp-hostname was
unset, no hostname would be sent. Now, the system hostname will be
set. Also, ifcfg-rh does not currently support this property, so there
is no way to disable this...)
Split a base NMSettingIPConfig class out of NMSettingIP4Config and
NMSettingIP6Config, and update things accordingly.
Further simplifications of now-redundant IPv4-vs-IPv6 code are
possible, and should happen in the future.
Merge NMIP4Address and NMIP6Address into NMIPAddress, and NMIP4Route
and NMIP6Route into NMIPRoute. The new types represent IP addresses as
strings, rather than in binary, and so are address-family agnostic.
The warning -Wstrict-prototypes was disabled by commit
db9b1df0e4 .
Enable it again, but avoid warnings for WiMax SDK by explicitly disabling the
compiler warning where needed.
Apparently clang does not produce a warning for -Wstrict-prototypes,
hence we don't need a clang specific #pragma.
Signed-off-by: Thomas Haller <thaller@redhat.com>
nm_setting_verify() took a GSList of other NMSettings, but really it
would just be simpler all around to pass the NMConnection instead...
This means that several formerly NMSetting-branded functions that
operated on lists-of-settings now get replaced with
NMConnection-branded functions instead.
Add nm-core-types.h, typedefing all of the GObject types in
libnm-core; this is needed so that nm-setting.h can reference
NMConnection in addition to nm-connection.h referencing NMSetting.
Removing the cross-includes from the various headers causes lots of
fallout elsewhere. (In particular, nm-utils.h used to include
nm-connection.h, which included every setting header, so any file that
included nm-utils.h automatically got most of the rest of libnm-core
without needing to pay attention to specifics.) Fix this up by
including nm-core-internal.h from those files that are now missing
includes.
Code outside of libnm-core/ should not include the private headers.
nm-core-internal.h should be used instead.
Fixes: 98fe073fb9
Signed-off-by: Thomas Haller <thaller@redhat.com>
This can be triggered by stopping the DBUS service. The assertion happens
because when the supplicant stops (due to the name-owner-change, which is triggered
because dbus-daemon quit), the supplicant manager sets all supplicant interfaces
to DOWN state so that they can be cleaned up. That does two things:
1) calls supplicant_interface_acquire() to attempt to re-launch wpa_supplicant
in case wpa_supplicant segfaulted
2) moves the NMDevicWifi to UNAVAILABLE state because the supplicant is gone,
the device is no longer usable and we must terminate the connection and wait
for the supplicant to come back
But #2 also ends up calling supplicant_interface_acquire(), because that's what
we want to do when the NMDeviceWifi is first managed (at startup) and when the
supplicant dies. The code just doesn't differentiate between the two cases.
To fix this, just allow duplicate "waiting for supplicant" pending
actions, which is fine because the operation doesn't care about strict
added/removed sequencing.
#0 0x000000381d0504e9 in g_logv (log_domain=0x59cd5b "NetworkManager", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7fff8cccc1a0) at gmessages.c:989
#1 0x000000381d05063f in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at gmessages.c:1025
#2 0x000000000044f53b in nm_device_add_pending_action (self=0xa60310, action=0x7febecd1d37d "waiting for supplicant", assert_not_yet_pending=1) at devices/nm-device.c:6466
#3 0x00007febecd0bc56 in supplicant_interface_acquire (self=0xa60310) at nm-device-wifi.c:262
#4 0x00007febecd0b240 in device_state_changed (device=0xa60310, new_state=NM_DEVICE_STATE_UNAVAILABLE, old_state=NM_DEVICE_STATE_ACTIVATED, reason=NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED) at nm-device-wifi.c:3136
#5 0x000000381dc05d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#6 0x000000381dc056bc in ffi_call (cif=cif@entry=0x7fff8cccc6c0, fn=0x7febecd0b050 <device_state_changed>, rvalue=0x7fff8cccc630, avalue=avalue@entry=0x7fff8cccc5b0) at ../src/x86/ffi64.c:522
#7 0x000000381e010ad8 in g_cclosure_marshal_generic (closure=0xa30a40, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>,
marshal_data=0x7febecd0b050 <device_state_changed>) at gclosure.c:1454
#8 0x000000381e010298 in g_closure_invoke (closure=closure@entry=0xa30a40, return_value=return_value@entry=0x0, n_param_values=4, param_values=param_values@entry=0x7fff8cccc8c0, invocation_hint=invocation_hint@entry=0x7fff8cccc860)
at gclosure.c:777
#9 0x000000381e02211b in signal_emit_unlocked_R (node=node@entry=0xa322b0, detail=detail@entry=0, instance=instance@entry=0xa60310, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff8cccc8c0) at gsignal.c:3624
#10 0x000000381e02a0f2 in g_signal_emit_valist (instance=instance@entry=0xa60310, signal_id=signal_id@entry=63, detail=detail@entry=0, var_args=var_args@entry=0x7fff8ccccaf8) at gsignal.c:3330
#11 0x000000381e02a8f8 in g_signal_emit_by_name (instance=0xa60310, detailed_signal=0x59a8d1 "state-changed") at gsignal.c:3426
#12 0x00000000004514a4 in _set_state_full (self=0xa60310, state=NM_DEVICE_STATE_UNAVAILABLE, reason=NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED, quitting=0) at devices/nm-device.c:6820
#13 0x0000000000449ec6 in nm_device_state_changed (self=0xa60310, state=NM_DEVICE_STATE_UNAVAILABLE, reason=NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED) at devices/nm-device.c:6949
#14 0x00007febecd0f247 in supplicant_iface_state_cb (iface=0x9b9290, new_state=13, old_state=12, disconnect_reason=0, user_data=0xa60310) at nm-device-wifi.c:2276
#15 0x000000381dc05d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#16 0x000000381dc056bc in ffi_call (cif=cif@entry=0x7fff8cccd230, fn=0x7febecd0eb20 <supplicant_iface_state_cb>, rvalue=0x7fff8cccd160, avalue=avalue@entry=0x7fff8cccd0e0) at ../src/x86/ffi64.c:522
#17 0x000000381e010f35 in g_cclosure_marshal_generic_va (closure=0xa2f490, return_value=0x0, instance=0x9b9290, args_list=<optimized out>, marshal_data=0x0, n_params=3, param_types=0xa422e0) at gclosure.c:1550
#18 0x000000381e0104c7 in _g_closure_invoke_va (closure=closure@entry=0xa2f490, return_value=return_value@entry=0x0, instance=instance@entry=0x9b9290, args=args@entry=0x7fff8cccd470, n_params=3, param_types=0xa422e0) at gclosure.c:840
#19 0x000000381e029749 in g_signal_emit_valist (instance=0x9b9290, signal_id=<optimized out>, detail=0, var_args=var_args@entry=0x7fff8cccd470) at gsignal.c:3238
#20 0x000000381e02a3af in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3386
#21 0x00000000004b0e4b in set_state (self=0x9b9290, new_state=13) at supplicant-manager/nm-supplicant-interface.c:344
#22 0x00000000004b0916 in smgr_avail_cb (smgr=0xa3c890, pspec=0xa3c8d0, user_data=0x9b9290) at supplicant-manager/nm-supplicant-interface.c:930
#23 0x000000381e010298 in g_closure_invoke (closure=0x9a68b0, return_value=return_value@entry=0x0, n_param_values=2, param_values=param_values@entry=0x7fff8cccd770, invocation_hint=invocation_hint@entry=0x7fff8cccd710) at gclosure.c:777
#24 0x000000381e02235d in signal_emit_unlocked_R (node=node@entry=0x990da0, detail=detail@entry=610, instance=instance@entry=0xa3c890, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff8cccd770) at gsignal.c:3586
#25 0x000000381e02a0f2 in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7fff8cccd900) at gsignal.c:3330
#26 0x000000381e02a3af in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3386
#27 0x000000381e014945 in g_object_dispatch_properties_changed (object=0xa3c890, n_pspecs=1, pspecs=0x0) at gobject.c:1047
#28 0x000000381e017019 in g_object_notify_by_spec_internal (pspec=<optimized out>, object=0xa3c890) at gobject.c:1141
#29 g_object_notify (object=0xa3c890, property_name=<optimized out>) at gobject.c:1183
#30 0x00000000004b56f1 in set_running (self=0xa3c890, now_running=0) at supplicant-manager/nm-supplicant-manager.c:228
#31 0x00000000004b5002 in name_owner_changed (dbus_mgr=0x99f740, name=0x9ba910 "fi.w1.wpa_supplicant1", old_owner=0xa945a0 ":1.25", new_owner=0xac2ce0 "", user_data=0xa3c890) at supplicant-manager/nm-supplicant-manager.c:294
#32 0x000000381dc05d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#33 0x000000381dc056bc in ffi_call (cif=cif@entry=0x7fff8cccdd10, fn=0x4b4d50 <name_owner_changed>, rvalue=0x7fff8cccdc80, avalue=avalue@entry=0x7fff8cccdc00) at ../src/x86/ffi64.c:522
#34 0x000000381e010ad8 in g_cclosure_marshal_generic (closure=0xa530a0, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>, marshal_data=0x0) at gclosure.c:1454
#35 0x000000381e010298 in g_closure_invoke (closure=0xa530a0, return_value=return_value@entry=0x0, n_param_values=4, param_values=param_values@entry=0x7fff8cccdf10, invocation_hint=invocation_hint@entry=0x7fff8cccdeb0) at gclosure.c:777
#36 0x000000381e02235d in signal_emit_unlocked_R (node=node@entry=0x99cce0, detail=detail@entry=0, instance=instance@entry=0x99f740, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff8cccdf10) at gsignal.c:3586
#37 0x000000381e02a0f2 in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7fff8ccce0d0) at gsignal.c:3330
#38 0x000000381e02a3af in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3386
#39 0x00000000004c4026 in proxy_name_owner_changed (proxy=0x998210, name=0xa3ad50 "fi.w1.wpa_supplicant1", old_owner=0x9cffc0 ":1.25", new_owner=0x99d230 "", user_data=0x99f740) at nm-dbus-manager.c:708
#40 0x000000381dc05d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#41 0x000000381dc056bc in ffi_call (cif=cif@entry=0x7fff8ccce410, fn=0x4c3fd0 <proxy_name_owner_changed>, rvalue=0x7fff8ccce380, avalue=avalue@entry=0x7fff8ccce300) at ../src/x86/ffi64.c:522
#42 0x000000381e010ad8 in g_cclosure_marshal_generic (closure=closure@entry=0x9beb80, return_gvalue=return_gvalue@entry=0x0, n_param_values=<optimized out>, param_values=<optimized out>,
invocation_hint=invocation_hint@entry=0x7fff8ccce630, marshal_data=marshal_data@entry=0x0) at gclosure.c:1454
#43 0x0000003829a10864 in marshal_dbus_message_to_g_marshaller (closure=0x9beb80, return_value=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=0x7fff8ccce630, marshal_data=0x0) at dbus-gproxy.c:1736
#44 0x000000381e010298 in g_closure_invoke (closure=0x9beb80, return_value=return_value@entry=0x0, n_param_values=3, param_values=param_values@entry=0x7fff8ccce690, invocation_hint=invocation_hint@entry=0x7fff8ccce630) at gclosure.c:777
#45 0x000000381e02235d in signal_emit_unlocked_R (node=node@entry=0x9be290, detail=detail@entry=347, instance=instance@entry=0x998210, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff8ccce690) at gsignal.c:3586
#46 0x000000381e02a0f2 in g_signal_emit_valist (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>, var_args=var_args@entry=0x7fff8ccce840) at gsignal.c:3330
#47 0x000000381e02a3af in g_signal_emit (instance=instance@entry=0x998210, signal_id=<optimized out>, detail=<optimized out>) at gsignal.c:3386
#48 0x0000003829a111c0 in dbus_g_proxy_emit_remote_signal (message=0xa6c2b0, proxy=0x998210) at dbus-gproxy.c:1789
#49 dbus_g_proxy_manager_filter (connection=<optimized out>, message=0xa6c2b0, user_data=0x9be520) at dbus-gproxy.c:1356
#50 0x000000382001006e in dbus_connection_dispatch (connection=connection@entry=0x9badb0) at dbus-connection.c:4631
#51 0x0000003829a0ad65 in message_queue_dispatch (source=source@entry=0x9bdcc0, callback=<optimized out>, user_data=<optimized out>) at dbus-gmain.c:90
#52 0x000000381d0492a6 in g_main_dispatch (context=0x99b4b0) at gmain.c:3066
#53 g_main_context_dispatch (context=context@entry=0x99b4b0) at gmain.c:3642
#54 0x000000381d049628 in g_main_context_iterate (context=0x99b4b0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3713
#55 0x000000381d049a3a in g_main_loop_run (loop=0x99b5d0) at gmain.c:3907
#56 0x0000000000443c28 in main (argc=1, argv=0x7fff8cccf268) at main.c:704
Signed-off-by: Thomas Haller <thaller@redhat.com>
Since 3a54d050 the AP address is not a gbyte[], but a char *. The fake AP BSSID
fixup could trigger an assertion failure:
Oct 26 11:14:45 goatlord.localdomain NetworkManager[540]: nm_ethernet_address_is_valid: assertion 'addr != NULL' failed
https://bugzilla.gnome.org/show_bug.cgi?id=739258
Fixes: 3a54d05098
Previously the only thing preventing default-unmanaged devices from
being auto-activated was luck and the fact that they didn't have any
available connections when in the UNMANAGED state. That's no longer
true, so we must be more explicit about their behavior.
Furthermore it makes no sense to allow default-unmanaged devices
to set priv->autoconnect=TRUE since that is never supposed to
happen, so enforce that both in NM itself and if the change
request comes in over the D-Bus interface.
Lastly, internal priv->autoconnect=TRUE changes never emitted a
property change notification, meaning the NMPolicy would never
schedule an autoconnect check if the device's priv->autoconnect
was set to TRUE as a result of re-activating or waking from sleep.
Previously a master device would wait for a carrier before starting
IP configuration only for 'manual' connections, but that's not quite
broad enough. We also want to allow SHARED methods to proceed
immediately since they are also effectively static/manual configuration.
Use the newly split out methods for checking whether a connection
requires a carrier or not to allow the SHARED method to proceed
for master devices without a carrier.
For example, this allows bridge configurations with tun/tap ports
to set up SHARED addressing before the tun/tap gets a carrier which
only happens when something opens the other side of the tun/tap
(like the VM or container).
Default unmanaged devices become managed when the user explicitly activated
a connection on the device, but the user can't do that unless the device
has some available connections. Fix things up so that default unmanaged
devices can have available connections.
Creating a mode=ap connection (as GNOME control center does) would otherwise
assert in complete_connection despite having a proper SSID set:
NetworkManager-wifi:ERROR:nm-device-wifi.c:1118:complete_connection: assertion failed: (ssid)
Aborted
Most NMDevice types defined their own error domain but then never used
it. A few did use their errors, but some of those errors are redundant
with NMDeviceError, and others can be added to it.
Merge libnm's NMDeviceError and the daemon's NMDeviceError into a
single enum (in nm-errors.h). Register the domain with D-Bus, and add
a test that the client side decodes it correctly.
The daemon's NM_DEVICE_ERROR_CONNECTION_INVALID gets absorbed into
libnm's NM_DEVICE_ERROR_INVALID_CONNECTION, and
NM_DEVICE_ERROR_UNSUPPORTED_DEVICE_TYPE gets dropped, since it was
only returned from one place, which is now using
NM_DEVICE_ERROR_FAILED, since (a) it ought to be a "can't happen", and
(b) the only caller of that function just logs error->message and then
frees the error without ever looking at the code.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
The IPv6LL address handling in userspace patches failed to handle the
case where the IPv6 method was 'ignore'. Previously the kernel would
usually add the IPv6LL address itself, but if NM has turned off kernel
IPv6LL then obviously this wouldn't happen. So when the method is
'ignore', turn off userspace IPv6LL handling and bounce disable_ipv6
to make the kernel add the IPv6LL address if it wants to.
Routing configuration fails to apply if the device is not IFF_UP, so if
we're going to apply IP configuration to the device, make sure it's IFF_UP
first.
https://bugzilla.gnome.org/show_bug.cgi?id=738479
