In the IPv4 case, we check whether we have a direct route to the gateway
also by looking at the configured addresses/subnets. That is correct,
because every IPv4 address also implies a subnet route.
For IPv6, we explicitly add all subnet routes manually (noprefixroute),
hence, we have a direct route exactly if we have it in our list.
Regardless of the configured IPv6 prefixes.
Since 03a5a85d, NMDeviceTeam was trying to use priv->teamd_pid to
decide whether a teamd_dbus_vanished() call indicated "teamd hasn't
been started yet" or "teamd was previously started and has now
exited". But this resulted in a race condition, where at startup, a
device could call g_dbus_watch_name(), then launch teamd (causing
teamd_pid to get set), and then have gdbus report that teamd hasn't
been started yet before the newly-launched teamd managed to grab the
bus name. Since teamd_pid would already be set when
teamd_dbus_vanished() was called, it would decide that this meant
"teamd was previously started and has now exited", so it would call
teamd_cleanup(), killing the just-started teamd process.
Fix this by having teamd_dbus_vanished() check priv->tdc instead,
which doesn't get set until after the first teamd_dbus_appeared()
call.
We forgot to include the BRIDGE, so that bridge
devices got a default priority (route-metric) of 950
Add it between VLAN and MODEM type.
Also return a different metric for UNKNOWN
device types, but these priorities are not
actually expected.
ModemManager needs to have CLOCAL set in the TTY termios configuration, in order
to notify the kernel that modem control lines are not in effect (e.g. so that a
transition to LOW in the DCD input control line doesn't trigger a hangup in the
TTY).
pppd in the other hand, needs CLOCAL unset in order to have proper modem control
lines in effect during the PPP session. So, when pppd starts it will store the
original termios settings, and before exiting it will restore the original
settings in the TTY. In other words, if CLOCAL was set before launching pppd,
CLOCAL will be also set after pppd exits.
Now, in order for this sequence to work correctly, NetworkManager also needs to
make sure that ModemManager is notified about the disconnection only after pppd
has really finished re-configuring the TTY.
https://bugzilla.gnome.org/show_bug.cgi?id=734347
----------------------
Once the patch is applied, we will be making sure that ModemManager is only
notified about the disconnection AFTER pppd has fully exited:
NetworkManager[27589]: <info> (ttyUSB2): device state change: activated -> deactivating (reason 'user-requested') [100 110 39]
Terminating on signal 15
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 8 / phase 'network'
Connect time 0.3 minutes.
Sent 56 bytes, received 0 bytes.
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 11 / phase 'disconnect'
Connection terminated.
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 1 / phase 'dead'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_exit_notify): cleaning up
NetworkManager[27589]: <warn> pppd pid 27617 exited with error: pppd received a signal
NetworkManager[27589]: <info> (ttyUSB2): modem state changed, 'connected' --> 'disconnecting' (reason: user-requested)
NetworkManager[27589]: <info> (ttyUSB2): modem state changed, 'disconnecting' --> 'registered' (reason: user-requested)
NetworkManager[27589]: <info> (ttyUSB2) modem deactivation finished
NetworkManager[27589]: <info> (ttyUSB2): device state change: deactivating -> disconnected (reason 'user-requested') [110 30 39]
NetworkManager[27589]: <info> (ttyUSB2): deactivating device (reason 'user-requested') [39]
Add nm_utils_setpgid() as a g_spawn*() child setup function for
calling setpgid(), and use it where appropriate rather than
reimplementing it every time.
There's no point in calling setpgid() on short-lived processes, so
remove the setpgid() calls when spawning dispatcher scripts, iptables,
iscsiadmin, and netconf.
Replace the pthread_sigwait()-based signal handling with
g_unix_signal_add()-based handling, and get rid of all the
now-unnecessary calls to nm_unblock_posix_signals() when spawning
subprocesses.
As a bonus, this also fixes the "^C in gdb kills NM too" bug.
If a device assumes a connection without activating a user-requested or
NM-requested connection, then disable_ipv6 is not touched. When the device
is deactivated, it still isn't touched even though userspace IPv6LL
is enabled. This could lead to an user-requested activation with
IPv6 configuration, but disable_ipv6=1.
Whenever userspace IPv6LL is turned on, we should also set disable_ipv6=0
to ensure IPv6 can function. Userspace IPv6LL will ensure that the
interface does not have an address until the user/connection requests
it, which was the only reason that NM touched disable_ipv6 anyway.
fixes:NetworkManager_Test203_testcase_286589
fixes:NetworkManager_Test204_testcase_286590
https://bugzilla.gnome.org/show_bug.cgi?id=741773
teamd first adds the link and only then listens on the bus therefore we race
with it. Let's watch for the bus presence even for the teamd devices we didn't
add for all their lifetime and recheck for assumed connections as we see them.
We don't want to start a teamd instance when there's an externally added team
interface. We just don't want to try to the daemon if it's not there (addressed
by a later commit).
This reverts commit a78386b6d1.
Conflicts:
src/devices/team/nm-device-team.c
When userspace IPv6LL capability is compiled into NetworkManager,
during deactivation NM will toggle userspace IPv6LL in some cases.
This causes link change events in the platform, which show up
in nm-device.c::device_link_changed().
When an EXTERNAL_DOWN interface was activated, the EXTERNAL_DOWN
flag was never cleared even if the device was set IFF_UP or if
a connection was activated via D-Bus (which explicitly sets the
device up).
Second, the device_link_changed() code changed device state
whether or not IFF_UP had actually changed, it simply looked at
the current value.
Together, this caused the first activation of an EXTERNAL_DOWN
device to succeed, but the EXTERNAL_DOWN flag was never cleared
even though the activation set the device IFF_UP. When a second
activation request came in, the device was moved to DISCONNECTED
state and IPv6LL genmode was reset, causing device_link_changed()
to run. Since the device had EXTERNAL_DOWN and IFF_UP were still
set, nm_device_set_unmanaged_flag() code was triggered to clear
EXTERNAL_DOWN, which resulted in a state transition to UNAVAILABLE
with a reason of CONNECTION_ASSUMED. This caused the second
activation request to fail because UNAVAILABLE devices cannot
activate connections by definition.
The fix has three parts:
1) Only change EXTERNAL_DOWN if IFF_UP actually changes, to prevent
spurious changes when something other than IFF_UP changes
2) Only clear EXTERNAL_DOWN when IFF_UP changes while the device
is UNMANAGED, since any state higher than UNMANAGED implies that
either an activation request was received (and thus the device
should be managed) or IFF_UP was set
3) Clear EXTERNAL_DOWN (without triggering state changes) when
any state higher than UNAVAILABLE is entered, since this implies
that a connection is activating or the device is no longer
IFF_UP
fixes:NetworkManager_Test108_testcase_303655
https://bugzilla.gnome.org/show_bug.cgi?id=741742
#0 0x00007f6c3aed34e9 in g_logv (log_domain=0x7f6c3ea7341c "NetworkManager", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7fff0a33fb60) at gmessages.c:989
#1 0x00007f6c3aed363f in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at gmessages.c:1025
#2 0x00007f6c3e8ead4f in nm_device_get_iface (self=0x0) at devices/nm-device.c:502
#3 0x00007f6c3e904f59 in nm_device_slave_notify_release (self=0x7f6c3fb48e60, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:1618
#4 0x00007f6c3e8ed69f in nm_device_release_one_slave (self=0x7f6c3fb22670, slave=0x7f6c3fb48e60, configure=1, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:968
#5 0x00007f6c3e904bf7 in slave_state_changed (slave=0x7f6c3fb48e60, slave_new_state=NM_DEVICE_STATE_UNMANAGED, slave_old_state=NM_DEVICE_STATE_ACTIVATED, reason=NM_DEVICE_STATE_REASON_REMOVED, self=0x7f6c3fb22670)
at devices/nm-device.c:1368
#6 0x00007f6c39829d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#7 0x00007f6c398296bc in ffi_call (cif=cif@entry=0x7fff0a340070, fn=0x7f6c3e9049d0 <slave_state_changed>, rvalue=0x7fff0a33ffe0, avalue=avalue@entry=0x7fff0a33ff60) at ../src/x86/ffi64.c:522
#8 0x00007f6c3b1bfad8 in g_cclosure_marshal_generic (closure=0x7f6c3fb5c8c0, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>, marshal_data=0x0) at gclosure.c:1454
#9 0x00007f6c3b1bf298 in g_closure_invoke (closure=0x7f6c3fb5c8c0, return_value=return_value@entry=0x0, n_param_values=4, param_values=param_values@entry=0x7fff0a340270, invocation_hint=invocation_hint@entry=0x7fff0a340210)
at gclosure.c:777
#10 0x00007f6c3b1d135d in signal_emit_unlocked_R (node=node@entry=0x7f6c3faf5d10, detail=detail@entry=0, instance=instance@entry=0x7f6c3fb48e60, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff0a340270) at gsignal.c:3586
#11 0x00007f6c3b1d90f2 in g_signal_emit_valist (instance=instance@entry=0x7f6c3fb48e60, signal_id=signal_id@entry=64, detail=detail@entry=0, var_args=var_args@entry=0x7fff0a3404a8) at gsignal.c:3330
#12 0x00007f6c3b1d98f8 in g_signal_emit_by_name (instance=0x7f6c3fb48e60, detailed_signal=0x7f6c3ea70f83 "state-changed") at gsignal.c:3426
#13 0x00007f6c3e8f894f in _set_state_full (self=0x7f6c3fb48e60, state=NM_DEVICE_STATE_UNMANAGED, reason=NM_DEVICE_STATE_REASON_REMOVED, quitting=0) at devices/nm-device.c:7486
#14 0x00007f6c3e8f0706 in nm_device_state_changed (self=0x7f6c3fb48e60, state=NM_DEVICE_STATE_UNMANAGED, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:7623
#15 0x00007f6c3e8f808b in nm_device_set_unmanaged (self=0x7f6c3fb48e60, flag=NM_UNMANAGED_INTERNAL, unmanaged=1, reason=NM_DEVICE_STATE_REASON_REMOVED) at devices/nm-device.c:6652
#16 0x00007f6c3e9943d0 in remove_device (manager=0x7f6c3fb20150, device=0x7f6c3fb48e60, quitting=0, allow_unmanage=1) at nm-manager.c:752
#17 0x00007f6c3e995c29 in platform_link_cb (platform=0x7f6c3fa7a870, ifindex=73, plink=0x7fff0a341260, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL, user_data=0x7f6c3fb20150) at nm-manager.c:2182
#18 0x00007f6c39829d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
#19 0x00007f6c398296bc in ffi_call (cif=cif@entry=0x7fff0a340bc0, fn=0x7f6c3e995b60 <platform_link_cb>, rvalue=0x7fff0a340b30, avalue=avalue@entry=0x7fff0a340ab0) at ../src/x86/ffi64.c:522
#20 0x00007f6c3b1bfad8 in g_cclosure_marshal_generic (closure=0x7f6c3fb14cf0, return_gvalue=0x0, n_param_values=<optimized out>, param_values=<optimized out>, invocation_hint=<optimized out>, marshal_data=0x0) at gclosure.c:1454
#21 0x00007f6c3b1bf298 in g_closure_invoke (closure=0x7f6c3fb14cf0, return_value=return_value@entry=0x0, n_param_values=5, param_values=param_values@entry=0x7fff0a340dc0, invocation_hint=invocation_hint@entry=0x7fff0a340d60)
at gclosure.c:777
#22 0x00007f6c3b1d135d in signal_emit_unlocked_R (node=node@entry=0x7f6c3fa76f00, detail=detail@entry=0, instance=instance@entry=0x7f6c3fa7a870, emission_return=emission_return@entry=0x0,
instance_and_params=instance_and_params@entry=0x7fff0a340dc0) at gsignal.c:3586
#23 0x00007f6c3b1d90f2 in g_signal_emit_valist (instance=instance@entry=0x7f6c3fa7a870, signal_id=signal_id@entry=2, detail=detail@entry=0, var_args=var_args@entry=0x7fff0a341018) at gsignal.c:3330
#24 0x00007f6c3b1d98f8 in g_signal_emit_by_name (instance=0x7f6c3fa7a870, detailed_signal=0x7f6c3ea5f1fa "link-changed") at gsignal.c:3426
#25 0x00007f6c3e92412a in announce_object (platform=0x7f6c3fa7a870, object=0x7f6c3fbb6fd0, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL) at platform/nm-linux-platform.c:1625
#26 0x00007f6c3e92b0f9 in event_notification (msg=0x7f6c3fa946f0, user_data=0x7f6c3fa7a870) at platform/nm-linux-platform.c:1986
#27 0x00007f6c3c35812f in nl_cb_call (msg=<optimized out>, type=<optimized out>, cb=<optimized out>) at ../include/netlink-private/netlink.h:141
#28 recvmsgs (cb=0x7f6c3fa7a620, sk=0x7f6c3fa7a710) at nl.c:952
#29 nl_recvmsgs_report (sk=0x7f6c3fa7a710, cb=0x7f6c3fa7a620) at nl.c:1003
#30 0x00007f6c3c3584f9 in nl_recvmsgs (sk=<optimized out>, cb=<optimized out>) at nl.c:1027
#31 0x00007f6c3e929dca in event_handler (channel=0x7f6c3fa78810, io_condition=G_IO_IN, user_data=0x7f6c3fa7a870) at platform/nm-linux-platform.c:4127
#32 0x00007f6c3aecc2a6 in g_main_dispatch (context=0x7f6c3fa68490) at gmain.c:3066
#33 g_main_context_dispatch (context=context@entry=0x7f6c3fa68490) at gmain.c:3642
#34 0x00007f6c3aecc628 in g_main_context_iterate (context=0x7f6c3fa68490, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3713
#35 0x00007f6c3aecca3a in g_main_loop_run (loop=0x7f6c3fa68550) at gmain.c:3907
#36 0x00007f6c3e8e9fff in main (argc=1, argv=0x7fff0a341c88) at main.c:483
https://bugzilla.gnome.org/show_bug.cgi?id=741651
If NM IPv6LL wasn't enabled then there is no need to bounce disable_ipv6
to tell the kernel to re-enable kernel IPv6LL, because kernel IPv6LL
is already enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=740702
We want to export the IP configuration of interfaces when they have some, but
the kernel doesn't care if they are IFF_UP or not. Neither should NetworkManager,
so don't force devices IFF_UP just because we're assuming their IP config.
Externally created software devices would be managed/assumed immediately
upon creation, which includes setting them IFF_UP and possibly turning
on NM-managed IPv6LL.
With this commit, expected behavior for external software devices is:
1) created: unmanaged state, no further action
2) IP address added but !IFF_UP: connection assumed, but device is not set IFF_UP
3) slave attached but !IFF_UP: connection assumed, but master is not set IFF_UP
3) set IFF_UP: connection assumed (if any), if not -> DISCONNECTED
This branch ensures that external software devices are not set IFF_UP
by NetworkManager when they are discovered. It additionally ensures that
they are not set IFF_UP during connection assumption. They may be set
IFF_UP later through specific user action.
https://bugzilla.gnome.org/show_bug.cgi?id=725647https://bugzilla.redhat.com/show_bug.cgi?id=1030947
Error: CHECKED_RETURN (CWE-252): [#def20]
NetworkManager-0.9.11.0/src/devices/nm-device.c:5037: check_return: Calling "g_spawn_async" without checking return value (as is done elsewhere 12 out of 13 times).
When dhclient trieds to request a previous lease and the server NAKs that
lease, dhclient emits the EXPIRE state. dhcpcd has also been known to emit
the 'nak' state for the same reason.
(systemd's DHCP client code does not push a NAK up to NetworkManager, but
jumps to the REBOOT state instead, so it is unaffected by this issue.)
NetworkManager saw the expire during IP configuration and treated that as
full activation failure. The connection would be restarted, the same lease
requested, and the same NAK delivered, over and over. Before a lease is
acquired, there is (by definition) no lease to expire, so these events
should be ignored.
We do, however, still want to handle abnormal failures, which is why
this patch splits the EXPIRE case from the FAIL case and handles them
separately.
https://bugzilla.gnome.org/show_bug.cgi?id=739482
Broken by 25387cd1ff
When an activation request comes in via D-Bus for a slave, the
slave device's priv->master is set in stage1 in master_ready_cb().
Then nm_device_bring_up() is called on the slave, which triggers
link_changed_cb() and device_link_changed(). That then executes
this code:
if (priv->master)
nm_device_enslave_slave (priv->master, self, NULL);
which enslaves the slave, but due to the NULL will not configure
the slave.
This code was only meant to be run for externally triggered
master/slave changes.
NetworkManager[30304]: <info> (virbr0): bridge port virbr0-nic was detached
NetworkManager[30304]: (devices/nm-device.c:962):nm_device_release_one_slave: runtime check failed: (reason == NM_DEVICE_STATE_REASON_NONE)
NetworkManager[30304]: <info> (virbr0-nic): released from master virbr0
If the slave is removed, then the master is already cleaned up so NM
doesn't need to do anything. 5dd48f fixed that but forgot to update
the !configure case, causing the warning but no other problems.
Fixes: 5dd48f7527
When the device decides it needs re-auth during IP config and returns
to the NEED_AUTH state, make sure we clean up any half-done IP operations
since they will be re-started after auth is completed and the
IP_CONFIG state is re-entered.
https://bugzilla.gnome.org/show_bug.cgi?id=741342
If we didn't start IPv4 and IPv6, but they're allowed to fail, progress
the activation without failing it. Also, progress assumed connections to
check-ip with whatever configuration that is available.
https://bugzilla.redhat.com/show_bug.cgi?id=1141264
because either GSM or CDMA is present. It is checked just above.
Coverity:
Defect type: DEADCODE
src/devices/bluetooth/nm-device-bt.c:312: dead_error_line: Execution cannot reach this statement: "fallback_prefix = dcgettext...".
nm_device_removed() calls nm_device_release_one_slave() in order to
fix up NetworkManager's master/slave bookkeeping, but we don't want to
tell the kernel to actually unslave the device, since that would
happen automatically anyway if the device was really removed, and
shouldn't happen if the device is just being removed from NM's device
list.
(In particular, don't remove all libvirt-created virtual network
devices from virbr0 when NetworkManager exits.)
nm_device_get_hw_address() may return NULL and nm_platform_link_get_type may
return NM_LINK_TYPE_NONE. While it might be a good idea to check for such cases
at the init time it seems easier to just ignore it and prevent blowing up in
subsequent deactivation.
A quick test case:
# while :; do ip link add moo0 type veth peer moo1; ip link del moo0 ; done
Yields:
NetworkManager:ERROR:devices/nm-device-ethernet.c:268:constructor:
assertion failed: (link_type == NM_LINK_TYPE_ETHERNET ||
link_type == NM_LINK_TYPE_VETH)
nm_device_set_hw_addr: assertion 'addr != NULL' failed
https://bugzilla.gnome.org/show_bug.cgi?id=740992
For IPv4, iproute for example defaults to a metric of 0.
Hence, the name NM_PLATFORM_ROUTE_METRIC_DEFAULT was misleading.
Also add a NM_PLATFORM_ROUTE_METRIC_DEFAULT_IP4 define for completeness.
https://bugzilla.gnome.org/show_bug.cgi?id=740780
We recently changed default values for route metrics. Revise that
again and increase the space between the default values.
No strong reason to do this, but it seems better to have larger
gaps and make use of the available range.
For IPv4 addresses, the kernel automatically adds a route when
configuring an IP address. Unfortunately, there is no way to control
this behavior or to set the route metric.
Fix this, by adding our own route and removing the kernel provided
one.
Note that this adds a major change in that we no longer call
nm_ip4_config_commit() for assumed devices.
https://bugzilla.gnome.org/show_bug.cgi?id=723178
Signed-off-by: Thomas Haller <thaller@redhat.com>
