NMPObjects are never modified after being put into the cache.
Hence, it is safe and encouraged to just keep a reference to them,
instead of cloning them.
Interestingly, NMPlatform's change signals have a platform_object
pointer, which is not the pointer to the NMPObjects itself, but
down-cast to the NMPlatformObject instance. It does so, because commonly
callers want to have a pointer to the NMPlatformObject instance, instead
of the outer NMPObjects. However, NMP_OBJECT_UP_CAST() is guaranteed
to work one would expect.
The order in which we add addresses to dad6_failed_addrs does not
matter. Hence, use g_slist_prepend() which is O(1), instead
g_slist_append() with O(n).
nm_utils_lifetime_get() already has so many arguments.
Essentially, the function returned %TRUE if and only if the
lifetime was greater then zero.
Combine the return value and the output argument for the lifetime.
It also matches better the function name: to get the lifetime.
In ndisc_set_router_config(), we initialize NMNDiscAddress based on
NMPlatformIP6Address instances. Note that their handling of timestamps
is not entirely identical.
For convenience of the user, NMPlatformIP6Address allows to not specify
any timestamp. On the contrary, for convenience of implementation does
NMNDiscAddress always require fully specified timestamps.
Properly convert one representation into the other.
We commonly only allow tabs at the beginning of a line, not
afterwards. The reason for this style is so that the code
looks formated right with tabstop=4 and tabstop=8.
Setting the state of NMActiveConnection results in invoking callbacks
in NMManager. Hence, it might be far-reaching. Clear
priv->queued_act_request before invoking the callbacks.
NM_DEVICE_OVS_INTERFACE_GET_PRIVATE() is implemented via the _NM_GET_PRIVATE()
macro. This macro uses C11's _Generic() to provide additional compiler checks
when casting from an incompatible pointer type.
As such,
NMDevice *device = ...;
NMDeviceOvsInterfacePrivate *priv;
priv = NM_DEVICE_OVS_INTERFACE_GET_PRIVATE (device);
causes a compilation error:
error: ‘_Generic’ selector of type ‘NMDevice * {aka struct _NMDevice *}’ is not compatible with any association
One workaround would be to cast the pointer first:
priv = NM_DEVICE_OVS_INTERFACE_GET_PRIVATE ((NMDeviceOvsInterface *) device);
A better fix is to mark NMDevice as a compatible pointer in _NM_GET_PRIVATE(),
which this patch does.
Previously, this went unnoticed, because due to bug "a43bf3388 build: fix configure
check for CC support of _Generic() and __auto_type", we failed to detect support
for _Generic() when compiling with -Werror. That essentially disables this check,
and NM_DEVICE_OVS_INTERFACE_GET_PRIVATE() would do a direct cast.
A workaround for this build failure might be to build with -Werror, which accidentally
results in not using _Generic().
https://bugzilla.gnome.org/show_bug.cgi?id=793183
Fixes: 8ad310f8e3
OvsInterface can postpone the stage3_ip[46]_config until the link
actually appears. It ought to restart the stage only when the link
appears, not upon further changes to it (which would trip an assertion
when starting the DHCP client while one already exists).
https://bugzilla.redhat.com/show_bug.cgi?id=1540063
Must always initialize cleanup variable, to be able to build with
"-fexceptions".
make[2]: Entering directory './contrib/fedora/rpm/NetworkManager.20180124-060444.C5tHCi/BUILD/NetworkManager-1.11.1'
CC src/devices/wifi/src_devices_wifi_libnm_device_plugin_wifi_la-nm-device-iwd.lo
In file included from ./shared/nm-utils/nm-glib.h:27:0,
from ./shared/nm-utils/nm-macros-internal.h:60,
from ./shared/nm-default.h:257,
from src/devices/wifi/nm-device-iwd.c:21:
src/devices/wifi/nm-device-iwd.c: In function ‘deactivate_async_finish’:
./shared/nm-utils/gsystem-local-alloc.h:37:8: error: ‘variant’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (*(Type*)v) \
^
src/devices/wifi/nm-device-iwd.c:405:29: note: ‘variant’ was declared here
gs_unref_variant GVariant *variant;
^~~~~~~
Fixes: d0c1e1a62a
XXX was used to either raise attention (NOTE) or to indicate
that this is ugly code that should be fixed (FIXME). The usage
was inconsistent.
Let's avoid XXX and use either NOTE or FIXME.
In a previous patch I added deactivate_async to make sure that NM
auto re-connect waits for the IWD state to changed from "disconnecting"
to "disconnected" before starting a new activation when the user wants
to switch from one profile to another. This doesn't account for when
IWD itself goes into "disconnecting" because of a connect failure.
When IWD goes into the "disconnecting" state we call
nm_device_state_changed (NM_DEVICE_STATE_FAILED,
NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT)
immediately to give feedback to user as soon as possible. We will
return FALSE from get_autoconnect_allowed for the period the
"disconnecting" state.
Deactivating the connection translates to a Device.Disconnect dbus call
to IWD. The dbus call normally returns immediately because the
corresponding nl80211 command returns immediately but we can't rely on
that. Make sure that NMDevice waits for the IWD method return before
continuing with the new activation request when switching wifi networks.
The handler would until now check if nm_device_is_activating() was true
or the NMDevice state was "activated" to decide whether to report to
NMDevice that we'd been unexpectedly disconnected (i.e. connection
failed). However NM's "prepare" and "need auth" states correspond to
IWD's "disconnected" state because they don't involve Wifi
authentication/association.
Additionally nm_device_is_activating() returns TRUE even when NMDevice
state is "disconnected" but an activation request is pending. As a
result when switching networks, NMDevice would first save the activation
request and go into the "disconnected" state, we'd then call the IWD's
Disconnect method and when we received the IWD state change notification
to "disconnected", we'd cause the pending activation request to be
considered a failure. The handler shouldn't report a failed
connection when the NMDevice state is "disconnected".
We already avoid committing the IP configuration for external devices
(see commit 60334a2893). However, we still start DHCP/IPv6-autoconf
and, especially, we change sysctl values of the device.
To be sure that no action is taken on the device, return early from
the IP configuration phase, as in the method=disabled/ignore case.
https://bugzilla.redhat.com/show_bug.cgi?id=1530288
If IPV6CP terminates before IPCP, pppd enters the RUNNING phase and we
start IP configuration without having an IP interface set, which
triggers assertions.
Instead, add a SetIfindex() D-Bus method that gets called by the
plugin when pppd becomes RUNNING. The method sets the IP ifindex of
the device and starts IP configuration.
https://bugzilla.redhat.com/show_bug.cgi?id=1515829
We also unconditionally use them with autotools.
Also, the detection for have_version_script does
not seem correct to me. At least, it didn't work
with clang.
Some targets are missing dependencies on some generated sources in
the meson port. These makes the build to fail due to missing source
files on a highly parallelized build.
These dependencies have been resolved by taking advantage of meson's
internal dependencies which can be used to pass source files,
include directories, libraries and compiler flags.
One of such internal dependencies called `core_dep` was already in
use. However, in order to avoid any confusion with another new
internal dependency called `nm_core_dep`, which is used to include
directories and source files from the `libnm-core` directory, the
`core_dep` dependency has been renamed to `nm_dep`.
These changes have allowed minimizing the build details which are
inherited by using those dependencies. The parallelized build has
also been improved.
In some cases we might want to load device plugins from multiple
directories. A special case that I have in mind is to load plugins from
build directory subdirectories in order to run NetworkManager from the
build directory.
[thaller@redhat.com: modify original patch]
The connection.mdns setting is a per-connection setting,
so one might expect that one activated device can only have
one MDNS setting at a time.
However, with certain VPN plugins (those that don't have their
own IP interface, like libreswan), the VPN configuration is merged
into the configuration of the device. So, in this case, there
might be multiple settings for one device that must be merged.
We already have a mechanism for that. It's NMIP4Config. Let NMIP4Config
track this piece of information. Although, stricitly speaking this
is not tied to IPv4, the alternative would be to introduce a new
object to track such data, which would be a tremendous effort
and more complicated then this.
Luckily, NMDnsManager and NMDnsPlugin are already equipped to
handle multiple NMIPConfig instances per device (IPv4 vs. IPv6,
and Device vs. VPN).
Also make "connection.mdns" configurable via global defaults in
NetworkManager.conf.
Instead, intern the string and cache it in the NMDeviceClass instance.
It anyway depends entirely on the GObject type (name), hence it should
also be cached at the type.
nm_match_spec_device_by_pllink() does not support matching on all parameters,
unlike nm_match_spec_device(). The reason is that certain parameters are
only available when having a NMDevice instance.
Add an argument "match_device_type", so that the caller can inject the
device type to be used. Note that for NMDevice, the device-type is
nm_device_get_type_description(), which usually depends on the device
class only. The only caller of nm_match_spec_device_by_pllink() is the
wifi factory, and it already knows that it wants to create a device of
type NMDeviceWifi. Hence, it knows and can specify "wifi" as
match_device_type.
Our convention is that when the body of an if() or for() spawns
more then one line, then it needs curly braces. If it's only one
line, it should have no curly braces. The latter part seems sometimes
a bit inconvenient, because changing
if (some_condition)
do_something ();
gets change to
if (some_condition) {
do_something ();
do_something_else ();
}
the diff shows 3 lines changed, although really only one changed.
But well, that's how it is...
Verify that an 8021x network is preprovisioned on IWD side before
declaring a connection as "available" or "compatible".
Also move the Infrastrucure mode check and the Hidden SSID check in
check_connection_available earlier because even if a compatible AP is
available and the connection can be used with wpa_supplicant, it can't
be used with IWD at this time.
This is mainly to enable using 8021x networks, which have to be
preprovisioned as an IWD config file to be supported and can not be
configured by asking the user for secrets over DBus, this is an IWD's
design choice.
Note that this assumes that secrets are only used during the Stage 2 of
the activation, i.e. for the wifi handshake, not in the later stages.
Keep a list of IWD's Known Networks which are networks that have their
configurations stored by IWD including the secrets, either because they
have been connected to before or because they were preprovisioned on the
machine.
Add a new device state reason code for unsupported IP method. It is
returned, for example, when users select manual IP configuration for
WWAN connections:
# nmcli connection mod Gsm ipv4.method manual ipv4.address 1.2.3.4/32
# nmcli connection up Gsm
Error: Connection activation failed: The selected IP method is not
supported
compared to the old:
Error: Connection activation failed: IP configuration could not be
reserved (no available address, timeout, etc.)
Note that we could instead fail the connection validation if the
method is not supported by the connection type, but adding such
limitation now could make existing connections invalid.
https://bugzilla.redhat.com/show_bug.cgi?id=1459529
