We no longer add these. If you use Emacs, configure it yourself.
Also, due to our "smart-tab" usage the editor anyway does a subpar
job handling our tabs. However, on the upside every user can choose
whatever tab-width he/she prefers. If "smart-tabs" are used properly
(like we do), every tab-width will work.
No manual changes, just ran commands:
F=($(git grep -l -e '-\*-'))
sed '1 { /\/\* *-\*- *[mM]ode.*\*\/$/d }' -i "${F[@]}"
sed '1,4 { /^\(#\|--\|dnl\) *-\*- [mM]ode/d }' -i "${F[@]}"
Check remaining lines with:
git grep -e '-\*-'
The ultimate purpose of this is to cleanup our files and eventually use
SPDX license identifiers. For that, first get rid of the boilerplate lines.
Platform had it's own scheme for reporting errors: NMPlatformError.
Before, NMPlatformError indicated success via zero, negative integer
values are numbers from <errno.h>, and positive integer values are
platform specific codes. This changes now according to nm-error:
success is still zero. Negative values indicate a failure, where the
numeric value is either from <errno.h> or one of our error codes.
The meaning of positive values depends on the functions. Most functions
can only report an error reason (negative) and success (zero). For such
functions, positive values should never be returned (but the caller
should anticipate them).
For some functions, positive values could mean additional information
(but still success). That depends.
This is also what systemd does, except that systemd only returns
(negative) integers from <errno.h>, while we merge our own error codes
into the range of <errno.h>.
The advantage is to get rid of one way how to signal errors. The other
advantage is, that these error codes are compatible with all other
nm-errno values. For example, previously negative values indicated error
codes from <errno.h>, but it did not entail error codes from netlink.
Note the special error codes NM_UTILS_ERROR_CONNECTION_AVAILABLE_*.
This will be used to determine, whether the profile is fundamentally
incompatible with the device, or whether just some other properties
mismatch. That information will be importand during a plain `nmcli
connection up`, where NetworkManager searches all devices for a device
to activate. If no device is found (and multiple errors happened),
we want to show the error that is most likely relevant for the user.
Also note, how NMDevice's check_connection_compatible() uses the new
class field "device_class->connection_type_check_compatible" to simplify
checks for compatible profiles.
The error reason is still unused.
It seems to me the NM_DEVICE_CLASS_DECLARE_TYPES() macro confuses more
than helping. Let's explicitly initialize the two fields, albeit with
another helper macro NM_DEVICE_DEFINE_LINK_TYPES() to get the list of
link-types right.
For consistency, also leave nop-lines like
device_class->connection_type_supported = NULL;
device_class->link_types = NM_DEVICE_DEFINE_LINK_TYPES ();
because all NMDevice class init methods should have this same
boiler plate code and to make it explicit that this is intended.
And there are only 3 occurences where this actually comes into play.
NMSettings exposes a cached list of all connection. We don't need
to clone it. Note that this is not save against concurrent modification,
meaning, add/remove of connections in NMSettings will invalidate the
list.
However, it wasn't save against that previously either, because
altough we cloned the container (GSList), we didn't take an additional
reference to the elements.
This is purely a performance optimization, we don't need to clone the
list. Also, since the original list is of type "NMConnection *const*",
use that type insistently, instead of dependent API requiring GSList.
IMO, GSList is anyway not a very nice API for many use cases because
it requires an additional slice allocation for each element. It's
slower, and often less convenient to use.
Previously, we used the generated GDBusInterfaceSkeleton types and glued
them via the NMExportedObject base class to our NM types. We also used
GDBusObjectManagerServer.
Don't do that anymore. The resulting code was more complicated despite (or
because?) using generated classes. It was hard to understand, complex, had
ordering-issues, and had a runtime and memory overhead.
This patch refactors this entirely and uses the lower layer API GDBusConnection
directly. It replaces the generated code, GDBusInterfaceSkeleton, and
GDBusObjectManagerServer. All this is now done by NMDbusObject and NMDBusManager
and static descriptor instances of type GDBusInterfaceInfo.
This adds a net plus of more then 1300 lines of hand written code. I claim
that this implementation is easier to understand. Note that previously we
also required extensive and complex glue code to bind our objects to the
generated skeleton objects. Instead, now glue our objects directly to
GDBusConnection. The result is more immediate and gets rid of layers of
code in between.
Now that the D-Bus glue us more under our control, we can address issus and
bottlenecks better, instead of adding code to bend the generated skeletons
to our needs.
Note that the current implementation now only supports one D-Bus connection.
That was effectively the case already, although there were places (and still are)
where the code pretends it could also support connections from a private socket.
We dropped private socket support mainly because it was unused, untested and
buggy, but also because GDBusObjectManagerServer could not export the same
objects on multiple connections. Now, it would be rather straight forward to
fix that and re-introduce ObjectManager on each private connection. But this
commit doesn't do that yet, and the new code intentionally supports only one
D-Bus connection.
Also, the D-Bus startup was simplified. There is no retry, either nm_dbus_manager_start()
succeeds, or it detects the initrd case. In the initrd case, bus manager never tries to
connect to D-Bus. Since the initrd scenario is not yet used/tested, this is good enough
for the moment. It could be easily extended later, for example with polling whether the
system bus appears (like was done previously). Also, restart of D-Bus daemon isn't
supported either -- just like before.
Note how NMDBusManager now implements the ObjectManager D-Bus interface
directly.
Also, this fixes race issues in the server, by no longer delaying
PropertiesChanged signals. NMExportedObject would collect changed
properties and send the signal out in idle_emit_properties_changed()
on idle. This messes up the ordering of change events w.r.t. other
signals and events on the bus. Note that not only NMExportedObject
messed up the ordering. Also the generated code would hook into
notify() and process change events in and idle handle, exhibiting the
same ordering issue too.
No longer do that. PropertiesChanged signals will be sent right away
by hooking into dispatch_properties_changed(). This means, changing
a property in quick succession will no longer be combined and is
guaranteed to emit signals for each individual state. Quite possibly
we emit now more PropertiesChanged signals then before.
However, we are now able to group a set of changes by using standard
g_object_freeze_notify()/g_object_thaw_notify(). We probably should
make more use of that.
Also, now that our signals are all handled in the right order, we
might find places where we still emit them in the wrong order. But that
is then due to the order in which our GObjects emit signals, not due
to an ill behavior of the D-Bus glue. Possibly we need to identify
such ordering issues and fix them.
Numbers (for contrib/rpm --without debug on x86_64):
- the patch changes the code size of NetworkManager by
- 2809360 bytes
+ 2537528 bytes (-9.7%)
- Runtime measurements are harder because there is a large variance
during testing. In other words, the numbers are not reproducible.
Currently, the implementation performs no caching of GVariants at all,
but it would be rather simple to add it, if that turns out to be
useful.
Anyway, without strong claim, it seems that the new form tends to
perform slightly better. That would be no surprise.
$ time (for i in {1..1000}; do nmcli >/dev/null || break; echo -n .; done)
- real 1m39.355s
+ real 1m37.432s
$ time (for i in {1..2000}; do busctl call org.freedesktop.NetworkManager /org/freedesktop org.freedesktop.DBus.ObjectManager GetManagedObjects > /dev/null || break; echo -n .; done)
- real 0m26.843s
+ real 0m25.281s
- Regarding RSS size, just looking at the processes in similar
conditions, doesn't give a large difference. On my system they
consume about 19MB RSS. It seems that the new version has a
slightly smaller RSS size.
- 19356 RSS
+ 18660 RSS
Change the output of nm_platform_error_to_string() to print the numeric value.
Also, accept a string buffer instead of using an alloca() allocated buffer.
There is still a macro to provide the previous functionality, but it
was ill-suited to call from inside a loop.
Reduce the use of NM_PLATFORM_GET / nm_platform_get() to get
the platform singleton instance.
For one, this is a step towards supporting namespaces, where we need
to use different NMNetns/NMPlatform instances depending on in which
namespace the device lives.
Also, we should reduce our use of singletons. They are difficult to
coordinate on shutdown. Instead there should be a clear order of
dependencies, expressed by owning a reference to those singelton
instances. We already own a reference to the platform singelton,
so use it and avoid NM_PLATFORM_GET.
(cherry picked from commit 94d9ee129d)
Add support for creating dummy devices. This commit adds a D-Bus
interface 'org.freedesktop.NetworkManager.Device.Dummy' which is used
primarily for determining the device type but does not carry any
properties.
