When a device is unmanaged, an explicit activation request can
still activate it. In particular, that is the case for
$ nmcli connection up "$PROFILE" ifname "$DEVICE"
It is also the case, for plain
$ nmcli connection up "$PROFILE"
where NetworkManager searches for a suitable device -- depending on
multi-connect setting of the profile.
The idea is, that a profile with "multi-connect=single" is expected
to sufficently and uniquely match a device, based on matching properties
like "connection.interface-name". In that case, an explicit activation
request from the user shows the intent to manage the device.
Note that it's hard to understand whether the profile really uniquely
selects a particular device. For example, if the profile doesn't specify
"connection.interface-name", it might still uniquely identify
an ethernet device, if you only have one such device.
On the other hand, with "connection.multi-connect" other than "single",
it is very much expected that the profile does not strictly match
one device.
Change the behavior here for multi-connect profiles. This allows the
user to block individual devices from activation via
$ nmcli device set "$DEVICE" managed not
A subsequent
$ nmcli connection up "$MULTI_PROFILE"
will not consider "$DEVICE" as suitable candidate for activation.
Likewise, in the future we may want to add a
$ nmcli connection up --all "$MULTI_PROFILE"
command, to activate the profile on all suitable device.
In that case again, unmanaged devices probably also should be skipped
for multi-connect profiles.
https://bugzilla.redhat.com/show_bug.cgi?id=1639254
(cherry picked from commit 0cb8bed23c)
This flag is more granular in whether to consider the connection
available or not. We probably should never check for the combined
flag NM_DEVICE_CHECK_CON_AVAILABLE_FOR_USER_REQUEST directly, but
always explicitly for the relevant parts.
Also, improve the error message, to indicate whether the device is
strictly unmanaged or whether it could be overruled.
(cherry picked from commit 920346a5b9)
The flags NMDeviceCheckConAvailableFlags and NMDeviceCheckDevAvailableFlags
both control whether a device appears available (either, available in
general, or related to a particular profile).
Also, both flag types strictly increase availability. Meaning: more flags,
more available.
There is some overlap between the flags, however they still have
their own distinct parts.
Improve the mapping from NMDeviceCheckConAvailableFlags to
NMDeviceCheckDevAvailableFlags, by picking exactly the flags
that are relevant.
(cherry picked from commit 5412fd389b)
With
$ nmcli connection up "$PROFILE" ifname "$DEVICE"
it's clear that the user means the particular device. That also
is taken as a indication to make $DEVICE as managed, in case it was
unmanaged before. So, this command implies a previous
$ nmcli device set $DEVICE managed yes
On the other hand, if the user just issues
$ nmcli connection up "$PROFILE"
without a particular device, then we should prefer devices which
are marked as managed instead of unmanaged once.
Likewise, we should consider the device's state when selecting
a device. This means, when activating a profile which is activatable on
multiple devices, it will now prefer devices which are not already
active. The exception to this is that if the profile itself is already
active (and multi-connect "single"), then it will prefer to re-activate
the profile on the same device. This was done previously already. What's
new is that if the the profile is not multi-connect "single", the said
exception no longer applies, and we prefer to activate the profile on a
hitherto unactivated device.
https://bugzilla.redhat.com/show_bug.cgi?id=1639254https://github.com/NetworkManager/NetworkManager/pull/232
(cherry picked from commit 09719bc479)
I am not sure, we ever call complete_address() for router-configurations.
Maybe not, so the dad-counter is never incremented and does not matter either.
If we however do, then we certainly want to preserve the DAD counter
when the address is already tracked.
(cherry picked from commit 8c6629b356)
we use get_expiry() to compare two lifetimes. Note, that previously,
it would correctly truncate the calculated expiry at G_MAXINT32-1.
However, that means, that two different lifetimes that both lie
more than 68 years in the future would compare equal.
Fix that, but extending the range to int64, so that no overflow
can happen.
(cherry picked from commit b086535cb7)
RFC4862 5.5.3, points d) and e) make it clear, that the list of
addresses should be compared based on the prefix.
d) If the prefix advertised is not equal to the prefix of an
address configured by stateless autoconfiguration already in the
list of addresses associated with the interface (where "equal"
means the two prefix lengths are the same and the first prefix-
length bits of the prefixes are identical), and if the Valid
Lifetime is not 0, form an address (and add it to the list) by
combining the advertised prefix with an interface identifier of
the link as follows:
That means, we should not initialize the interface identifier first
(via complete_address()) and then search for the full address.
See-also: https://tools.ietf.org/search/rfc4862#section-5.5.3
(cherry picked from commit 23c417854a)
Previously, we would coerce the value so that preferred is the same
as lifetime. However, RFC4862 5.5.3.c) says:
c) If the preferred lifetime is greater than the valid lifetime,
silently ignore the Prefix Information option. A node MAY wish to
log a system management error in this case.
See-also: https://tools.ietf.org/search/rfc4862#section-5.5.3
(cherry picked from commit 43c3c259c8)
Note how the nm_ndisc_add_*() return a boolean to indicate whether
anything changes. That is taken to decide whether to emit a changed
signal.
Previously, we would not consider all fields which are exposed
as public API.
Note that nm-ip6-config.c would care about the lifetime of NMNDiscAddress.
For that, nm_ndisc_add_address() would correctly consider a change of
the lifetime as relevant. So, this was for the most part not broken.
However, for example nm_ndisc_add_route() would ignore changes to the
gateway.
Always signal changes if anything changes at all. It's more correct
and robust.
(cherry picked from commit 98ec56c670)
It should never happen that we are unable to switch the namespace.
However, in case it does, we cannot just return G_SOURCE_CONTINUE,
because we will just endlessly trying to process IO without actually
reading from the socket.
This shouldn't happen, but the instance is hosed and something is
very wrong. No longer handle the socket to avoid an endless loop.
(cherry picked from commit d444fcde34)
event_ready() calls ndp_callall_eventfd_handler(), which invokes
our own callback, which may invoke change notification.
At that point, it's not guaranteed that the signal handler won't
destroy the ndisc instance, which means, the "struct ndp" gets destroyed
while invoking callbacks. That's bad, because libndp is not robust
against that.
Ensure the object stays alive long enough.
(cherry picked from commit 9aa628cedb)
It's just ugly to invoke external code in the middel of an operation.
You never know, whether the handler won' unref the ndisc instance.
(cherry picked from commit 1f856b7cb3)
We're hooking the signal on construction, but we only queue a pending
action on reaching UNAVAILABLE state. The signal could fire in between:
<info> [1539282167.9666] manager: (msh0): new 802.11 OLPC Mesh device (/org/freedesktop/NetworkManager/Devices/4)
<info> [1539282168.1440] manager: (wlan0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/5)
<info> [1539282168.1831] device (msh0): found companion WiFi device wlan0
<warn> [1539282168.2110] device (msh0): remove_pending_action (1): 'waiting-for-companion' not pending
file src/devices/nm-device.c: line 13966 (<dropped>): should not be reached
https://github.com/NetworkManager/NetworkManager/pull/229
(cherry picked from commit 08225c5e96)
In update update_ext_ip_config() we remove from various internal
configurations those addresses and routes that were removed externally
by users.
When the interface is brought down, the kernel automatically removes
routes associated with it and so we should not consider them as
"removed by users".
Instead, keep them so that they can be restored when the interface
comes up again.
(cherry picked from commit f069c98cc9)
device_link_changed() can't use nm_device_update_from_platform_link()
to update the device private fields because the latter overwrites
priv->iface and priv->up, and so the checks below as:
if (info.name[0] && strcmp (priv->iface, info.name) != 0) {
and:
was_up = priv->up;
priv->up = NM_FLAGS_HAS (info.n_ifi_flags, IFF_UP);
...
if (priv->up && !was_up) {
never succeed.
Fixes: d7f7725ae8
(cherry picked from commit 46ed756112)
Previously we had nm_ip{4,6}_config_dump() for debugging purposes, but
they were inconveniently printing to stdout and so the output was not
ordered in the journal.
Implement a unified nm_ip_config_dump() that logs through the usual
logging mechanism.
(cherry picked from commit 3b49d1075d)
The script didn't include all the symbols needed by plugins because
libNetworkManager.a, as built by meson, doesn't include symbols from
other static libraries that are linked in. Since we used
libNetworkManager.a to know which symbols are potentiall available
from NM, the result was an incomplete list.
Unfortunately, the only way to include the whole static library is to
create a dependency object and use 'link_whole', but this is only
available in meson >= 0.46. Since 'link_whole' is available for
executables in meson >= 0.40, create a fake executable and use that to
enumerate symbols.
Also add tests to check that plugins can be loaded correctly.
Fixes: dfa2a2b40c
(cherry picked from commit 19a718bc13)
When there are profiles with wifi.hidden=yes, NetworkManager
will actively scan for these SSIDs. This makes the scan request
(and thus the user) recognizable and trackable.
It seems generally a bad idea to use hidden networks, as they
compromise either the privacy or usablity for the clients.
Log a (rate-limited) warning about this.
(cherry picked from commit 365079c09e)
The net.connman.iwd.Station interface, unlike the Device interface, can
go away and come back when the device changes modes or goes DOWN and UP.
The GDbusProxy for the interface becomes invalid after the interface
disappeared and reappeared. This would make the IWD backend stop
working after rfkill was used or after suspend/resume (provided the
suspend/resume events are detected, without them everything works and is
really fast too).
Redo the handling of the Powered property changes, corresponding to
device UP state, to get a new GDBusProxy when the Station interface
reappears. Simplify some checks knowing that priv->can_scan implies for
example that the Station interface is present, and that priv->enabled
implies the NM device state is >= DISCONNECTED.
https://github.com/NetworkManager/NetworkManager/pull/211
(cherry picked from commit bfacd24f83)
Also make sure the secrets request callback only send a reply to IWD and
the Connect method return callback executes the device state change to
"disconnected".
(cherry picked from commit 061913c588)
state_changed (called when IWD signalled device state change) was
supposed to not change NM device state on connect success or failure and
instead wait for the DBus Connect() method callback but it would
actually still call nm_device_emit_recheck_auto_activate on failure so
refactor state_changed and network_connect_cb to make sure
the state change and nm_device_emit_recheck_auto_activate are only
called from network_connect_cb.
This fixes a race where during a switch from one network to another NM
would immediately start a new activation after state_changed and
network_connect_cb would then handle the Connect failure and mark the
new activation as failed.
(cherry picked from commit 44af62eb1f)
When creating the mirror 802.1x connections for IWD 802.1x profiles
set the NM_SETTING_SECRET_FLAG_NOT_SAVED flag on the secrets that
may at some point be requested from our agent. The saved secrets could
not be used anyway because of our use of
NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW in
nm_device_iwd_agent_query. But also try to respect whatever secret
caching policy has been configured in the IWD profile for those secrets,
IWD would be responsible for storing them if it was allowed in the
profile.
(cherry picked from commit e3aba12d14)
In two places stop using g_dbus_proxy_new_* to create whole new
interface proxy objects for net.connman.iwd.Network as this will
normally have a huge overhead compared to asking the ObjectManager
client that we already have in NMIwdManager for those proxies.
dbus-monitor shows that for each network path returned by
GetOrderedNetworks () -- and we call it every 10 or 20 seconds and may
get many dozens of networks back -- gdbus would do the following each
time:
org.freedesktop.DBus.AddMatch("member=PropertiesChanged")
org.freedesktop.DBus.StartServiceByName("net.connman.iwd")
org.freedesktop.DBus.GetNameOwner("net.connman.iwd")
org.freedesktop.DBus.Properties.GetAll("net.connman.iwd.Network")
org.freedesktop.DBus.RemoveMatch("member=PropertiesChanged")
(cherry picked from commit fd1cfa6db4)
char[] is not a char *; it can not go NULL.
test-ifupdown.c:147:27: error: address of array 'n->name' will always evaluate
to 'true' [-Werror,-Wpointer-bool-conversion]
g_assert (b->name && n->name);
test-ifupdown.c:156:27: error: address of array 'm->key' will always evaluate
to 'true' [-Werror,-Wpointer-bool-conversion]
g_assert (k->key && m->key);
(cherry picked from commit b64ae759ad)
libcurl does not allow removing easy-handles from within a curl
callback.
That was already partly avoided for one handle alone. That is, when
a handle completed inside a libcurl callback, it would only invoke the
callback, but not yet delete it. However, that is not enough, because
from within a callback another handle can be cancelled, leading to
the removal of (the other) handle and a crash:
==24572== at 0x40319AB: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24572== by 0x52DDAE5: Curl_close (url.c:392)
==24572== by 0x52EC02C: curl_easy_cleanup (easy.c:825)
==24572== by 0x5FDCD2: cb_data_free (nm-connectivity.c:215)
==24572== by 0x5FF6DE: nm_connectivity_check_cancel (nm-connectivity.c:585)
==24572== by 0x55F7F9: concheck_handle_complete (nm-device.c:2601)
==24572== by 0x574C12: concheck_cb (nm-device.c:2725)
==24572== by 0x5FD887: cb_data_invoke_callback (nm-connectivity.c:167)
==24572== by 0x5FD959: easy_header_cb (nm-connectivity.c:435)
==24572== by 0x52D73CB: chop_write (sendf.c:612)
==24572== by 0x52D73CB: Curl_client_write (sendf.c:668)
==24572== by 0x52D54ED: Curl_http_readwrite_headers (http.c:3904)
==24572== by 0x52E9EA7: readwrite_data (transfer.c:548)
==24572== by 0x52E9EA7: Curl_readwrite (transfer.c:1161)
==24572== by 0x52F4193: multi_runsingle (multi.c:1915)
==24572== by 0x52F5531: multi_socket (multi.c:2607)
==24572== by 0x52F5804: curl_multi_socket_action (multi.c:2771)
Fix that, by never invoking any callbacks when we are inside a libcurl
callback. Instead, the handle is marked for completion and queued. Later,
we complete all queue handles separately.
While at it, drop the @error argument from NMConnectivityCheckCallback.
It was only used to signal cancellation. Let's instead signal that via
status NM_CONNECTIVITY_CANCELLED.
https://bugzilla.gnome.org/show_bug.cgi?id=797136https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1792745https://bugzilla.opensuse.org/show_bug.cgi?id=1107197https://github.com/NetworkManager/NetworkManager/pull/207
Fixes: d8a31794c8
(cherry picked from commit fa40fc6d76)
Note that NMSettingEthtool and NMSettingMatch don't have such
functions either.
We have API
nm_connection_get_setting (NMConnection *, GType)
nm_connection_get_setting_by_name (NMConnection *, const char *)
which can be used generically, meaning: the requested setting type
is an argument to the function. That is generally more useful and
flexible.
Don't add API which duplicates existing functionality and is (arguably)
inferiour. Drop it now. This is an ABI/API break for the current development
cycle where the 1.14.0 API is still unstable. Indeed it's already after
1.14-rc1, which is ugly. But it's also unlikely that somebody already uses
this API/ABI and is badly impacted by this change.
Note that nm_connection_get_setting() and nm_connection_get_setting_by_name()
are slightly inconvenient in C still, because they usually require a cast.
We should fix that by changing the return type to "void *". Such
a change may be possibly any time without breaking API/ABI (almost, it'd
be an API change when taking a function pointer without casting).
(cherry picked from commit a10156f516)
We cannot be sure who holds a reference to the proxy, and
who is gonna call us back after the VPN connection instance
is destroyed.
(cherry picked from commit 6ebb9091d2)
Got this assertion:
NetworkManager[12939]: <debug> [1536917977.4868] active-connection[0x563d8fd34540]: set state deactivated (was deactivating)
...
NetworkManager[12939]: nm-openvpn[1106] <info> openvpn[1132]: send SIGTERM
NetworkManager[12939]: nm-openvpn[1106] <info> wait for 1 openvpn processes to terminate...
NetworkManager[12939]: nm-openvpn[1106] <warn> openvpn[1132] exited with error code 1
NetworkManager[12939]: <info> [1536917977.5035] vpn-connection[0x563d8fd34540,2fdeaea3-975f-4325-8305-83ebca5eaa26,"my-openvpn-Red-Hat",0]: VPN plugin: requested secrets; state disconnected (9)
NetworkManager[12939]: plugin_interactive_secrets_required: assertion 'priv->vpn_state == STATE_CONNECT || priv->vpn_state == STATE_NEED_AUTH' failed
Meaning. We should either ensure that secrets_required_cb() signal callback
is disconnected from proxy's signal, or we gracefully handle callbacks at
unexpected moments. Do the latter.
(cherry picked from commit 92344dd084)
