Introduce a new option to NMSettingIpConfig. The new option is ternary
type being the default value set to disabled. When enabled,
NetworkManager will instruct the DHCP client to send RELEASE message
when IP addresses are being removed.
The new option at NMSettingConnection allow the user to specify if the
connection needs to be down when powering off the system. This is useful
for IP address removal prior powering off. In order to accomplish that,
we listen on "Shutdown" systemd DBus signal.
The option is set to FALSE by default, it can be specified globally on
configuration file or per profile.
Currently the internal DHCP client sets traffic class "CS6" in the DS
field of the IP header for outgoing packets.
dhclient sets the field according to the definition of TOS (RFC 1349),
which was was deprecated in 1998 by RFC 2474 in favor of DSCP.
Introduce a new property IPvX.dhcp-dscp (currently valid only for
IPv4) to specify a custom DSCP value for DHCP backends that support it
(currently, only the internal one).
Define the default value to CS0, because:
- section 4.9 of RFC 4594 specifies that DHCP should use the standard
(CS0 = 0) service class;
- section 3.2 says that class CS6 is for "transmitting packets
between network devices (routers) that require control (routing)
information to be exchanged between nodes", listing "OSPF, BGP,
ISIS, RIP" as examples of such traffic. Furthermore, it says that:
User traffic is not allowed to use this service class. By user
traffic, we mean packet flows that originate from user-controlled
end points that are connected to the network.
- we got reports of some Cisco switches dropping DHCP packets because
of the CS6 marking.
(cherry picked from commit fcd907e062)
To embrace inclusive language, deprecate the NMSettingConnection
autoconnect-slaves property and introduce autoconnect-ports property.
(cherry picked from commit 194455660d)
To embrace inclusive language, deprecate the NMSettingConnection
slave-type property and introduce port-type property.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
CMP() is a confusing pattern. Sure enough, the sort order was wrong, for
example, `nmcli connection` would show
$ nmcli -f STATE,UUID,DEVICE c
STATE UUID DEVICE
activating 3098c902-c59c-45f4-9e5a-e4cdb79cfe1b nm-bond
activated e4fc23ac-54ab-4b1a-932a-ebed12c96d9b eth1
("activating" shown before "activated").
With `nmcli device`, we sort with compare_devices(). This first sorts by
device state (with "connected" being sorted first). Only when the device
state is equal, we fallback to nmc_active_connection_cmp(). So with
`nmcli device` we usually get "connected" devices first, and we don't
really notice that there is a problem with nmc_active_connection_cmp().
On the other hand, `nmcli connection` likes to sort first via
nmc_active_connection_cmp(), which gets it wrong. Profiles in
"activating" state are sorted first. That's inconsistent with `nmcli
device`, but it's also not what is intended.
Fix that.
Note the change in the test output. Both eth1 and eth0 are connected to
to the same profile, but one "eth0" the active-connection's state is
DEACTIVATING, while on "eth1" it's ACTIVATED (but both device's states
are "CONNECTED"). That's why "eth1" is now sorted first (as desired).
Fixes: a1b25a47b0 ('cli: rework printing of `nmcli connection` for multiple active connections')
- test for "-order" option with `nmcli connection show`.
- test for order of activated devices. Optimally, the devices
should be in activating vs. activated state. I fail to do that,
the mock implementation is cumbersome to use. It still seems useful
to have this (maybe it could be improved).
Adds a new WiFi 6GHz capability flag, NM_WIFI_DEVICE_CAP_FREQ_6GHZ,
along side the existing NM_WIFI_DEVICE_CAP_FREQ_2GHZ &
NM_WIFI_DEVICE_CAP_FREQ_5GHZ flags.
Gnome settings utilizes the 2 existing flags to present supported
bands in gnome-settings. I will be using this additional flag in
modifications there.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1739
f-string is not supported in python2, and the autotool build complains
about it as follows:
```
LIBTOOL="/bin/sh ./libtool" "../src/tests/client/test-client.sh" "." ".." "python2" -- TestNmCloudSetup
File "/builds/NetworkManager/NetworkManager/src/tests/client/test-client.py", line 722
return f"{major}.{minor}.{micro}"
^
SyntaxError: invalid syntax
test-client.py failed!!
make[3]: *** [check-local-tests-client] Error 1
File "/builds/NetworkManager/NetworkManager/src/tests/client/test-client.py", line 722
return f"{major}.{minor}.{micro}"
^
SyntaxError: invalid syntax
test-client.py failed!!
```
Also, python2 complains about extra comma during argument unpacking.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1718
When updating NetworkManager to a new version, normally the service is
not restarted by the installer to avoid interrupting networking.
However, next nmcli invocation will use the updated version, but against
the older version of the daemon that is still running. Although this is
suposed to work, it is advisable that nmcli and daemon's versions are
the same. Emit a warning recommending restarting the daemon.
Add nmcli test to check the new feature. To avoid breaking the existing
tests, test-networkmanager-service now reports the same version than the
running nmcli except if it's instructed to report a different one.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1703
If --offline and --ask were used at the same time, and endless loop
showing the readline's prompt but without waiting for user's input
happened.
This was because when using --offline, all arguments are parsed and
resolved before running the g_main_loop. In nmc_readline_helper it was
checked that the main loop is running, so if g_main_loop_quit is called
we can stop waiting for user's input.
Fix this bug by continue polling for user input if the main loop is
running or if we are in offline mode. Cancelling the user input is
still possible both in normal and offline mode with Ctrl+C or Ctrl+D.
Added a test case to verify that this still works after future changes.
With the unit test framework, we define special methods, like setUp()
and test_*(). This is documented, but not obvious.
Previously, TestNmClient was the base class for our tests classes, and
it provided some functionality (and state). It was utterly confusing how
pieces fit together.
Instead, move the state to a new class NMTestContext(). That contains
most of the code from TestNmClient. Drop TestNmClient and let the test
classes directly descend from unittest.TestCase.
The difference is, when you now look at a certain test (test_001()), you
can easier understand which code runs when. First, the test class has a
setUp() method which runs, but that method is now trivial without extra
context. Second, there is the @nm_test attribute that wraps the
function. But that's it. It's all at one place, and we delegate instead
of inherit.
Don't rely on resources provided by mock metadata server by default,
create the from within the test instead.
This allows for more flexibility, but the locality of the test fixture
relative to the tests makes the test more legible.
When a pexpect check fails, we want to see the full content of the
buffer, so we can better see where it went wrong. Increase the context
that is printed in the error message.
"preexec_fn" is not great, because it is not generally safe in multi
threaded code (and we don't know whether the test didn't start other
threads already, like a GDBus worker thread). Well, it probably is safe,
if you only call async signal safe code, but it's not clear what os.dup2()
does under the hood.
Just avoid that. We can pass on the FD directly.
test_ec2 (__main__.TestNmCloudSetup.test_ec2) ... /usr/lib64/python3.11/unittest/case.py:579: ResourceWarning: unclosed file <_io.BufferedWriter name=5>
if method() is not None:
ResourceWarning: Enable tracemalloc to get the object allocation traceback
ok
Fixes: d89d42bf23 ('tests/client: test nm-cloud-setup')
This seems unnecessary, because we spawn the child process via subprocess.Popen and
set "pass_fds". That already ensures to pass on the FD.
Worse, socket.set_inheritable() is only added in Python 3.4, that means the
test is gonna break for Python 3.2 and 3.3. Just avoid that by not using the
unnecessary function. For the same reason, drop "inheritable=True" from
os.dup2(). "inheritable=True" is already the default, but only exists
since Python 3.4.
Fixes: d89d42bf23 ('tests/client: test nm-cloud-setup')
The test uses subprocess.Popen()'s "pass_fd" argument. That is only
available since Python 3.2. Possibly it could be solved differently, but
that is not implemented. Instead, skip the test.
Also, socket.socket.set_inheritable() is Python 3.4. But presumably
we don't need it.
Fixes: d89d42bf23 ('tests/client: test nm-cloud-setup')
These properties were never implemented. Also, they were not settable
via nmcli. Drop them from being shown. This is an API break, but
hopefully something that does not affect anybody in a bad way.
The mock service is more widely useful -- in particular for testing
nm-cloud-setup in a following commit.
Split the commonly useful parts into TestNmClient class.
This setting allows the user to remove the local route rule that is
autogenerated for both IPv4 and IPv6. By default, NetworkManager won't
touch the local route rule.
The configure flag and APN for the initial EPS bearer are used when
bringing up cellular modem connections. These settings are only relevant
for LTE modems.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
During srv_shutdown() we do
p.stdin.close()
p.kill()
Usually, the kill wins and the service just drops off the bus:
libnm-dbus[3201919]: <debug> [438617.45324] nmclient[40f7938626f3f5f0]: name owner changed: ":1.1" -> (null)
libnm-dbus[3201919]: <debug> [438617.45332] nmclient[40f7938626f3f5f0]: release all
at which point all objects in NMClient get destroyed and the signals get
emitted in the order:
libnm-dbus[3201919]: <trace> [438617.45574] nmclient[40f7938626f3f5f0]: [nmclient] emit "device-removed" signal for /org/freedesktop/NetworkManager/Devices/1
nmcli[out]: eth0: device removed
libnm-dbus[3201919]: <trace> [438617.45590] nmclient[40f7938626f3f5f0]: [nmclient] emit "any-device-removed" signal for /org/freedesktop/NetworkManager/Devices/1
libnm-dbus[3201919]: <trace> [438617.45593] nmclient[40f7938626f3f5f0]: [nmclient] emit "connection-removed" signal for /org/freedesktop/NetworkManager/Settings/Connectio>
nmcli[out]: con-1: connection profile removed
However, sometimes the stub service notices that stdin was closed and it
sends signals about shutting down:
libnm-dbus[3201061]: <trace> [438226.44965] nmclient[401639659459c316]: interfaces-removed: [/org/freedesktop/NetworkManager/Settings] receive interface remove event for >
libnm-dbus[3201061]: <trace> [438226.44966] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: changed-type 0x01 linked
libnm-dbus[3201061]: <trace> [438226.44967] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: changed-type 0x01 consumed
libnm-dbus[3201061]: <trace> [438226.44968] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: changed-type 0x02 linked
libnm-dbus[3201061]: <trace> [438226.44969] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: unregister NMClient from D-Bus object
libnm-dbus[3201061]: <trace> [438226.44971] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: drop D-Bus instance
libnm-dbus[3201061]: <trace> [438226.44971] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager/Settings]: set D-Bus object state unlinked
libnm-dbus[3201061]: <trace> [438226.44972] nmclient[401639659459c316]: [nmclient] emit "connection-removed" signal for /org/freedesktop/NetworkManager/Settings/Connectio>
nmcli[out]: con-1: connection profile removed
libnm-dbus[3201061]: <trace> [438226.44992] nmclient[401639659459c316]: interfaces-removed: [/org/freedesktop/NetworkManager] receive interface remove event for interface>
libnm-dbus[3201061]: <trace> [438226.44994] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: changed-type 0x01 linked
libnm-dbus[3201061]: <trace> [438226.44995] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: changed-type 0x01 consumed
libnm-dbus[3201061]: <trace> [438226.44996] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: changed-type 0x02 linked
libnm-dbus[3201061]: <trace> [438226.44998] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: unregister NMClient from D-Bus object
libnm-dbus[3201061]: <trace> [438226.44999] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: drop D-Bus instance
libnm-dbus[3201061]: <trace> [438226.45000] nmclient[401639659459c316]: [/org/freedesktop/NetworkManager]: set D-Bus object state unlinked
libnm-dbus[3201061]: <trace> [438226.45001] nmclient[401639659459c316]: [nmclient] emit "device-removed" signal for /org/freedesktop/NetworkManager/Devices/1
nmcli[out]: eth0: device removed
libnm-dbus[3201061]: <trace> [438226.45005] nmclient[401639659459c316]: [nmclient] emit "any-device-removed" signal for /org/freedesktop/NetworkManager/Devices/1
nmcli[out]: NetworkManager is stopped
libnm-dbus[3201061]: <debug> [438226.45545] nmclient[401639659459c316]: name owner changed: ":1.1" -> (null)
libnm-dbus[3201061]: <debug> [438226.45550] nmclient[401639659459c316]: release all
The fix is to accept the events in any order.
(cherry picked from commit 8548ab29ee)
The test stub service watches stdin, and if it gets closed the service
will shut down. Note that the service does not catch any signals, so
sending a signal will kill the service right away.
The previous code first closed stdin, and then killed the process.
That can result in different outcomes on D-Bus. Usually the signal
gets received first, and the test service just drops off the bus.
Sometimes it notices the closing of stdin and shuts actively down.
That can make a difference, especially for the test_monitor() test which
runs the monitor while stopping the service.
We could just always kill the stub service to get consistent behavior.
However, that doesn't seem very useful. Instead, randomize the behavior
to easier see how the behavior differs.
(cherry picked from commit fc282d5e05)
For debugging libnm, LIBNM_CLIENT_DEBUG can be very useful.
As the tests compare stdout/stderr from nmcli with expected output, just
enabling it will break the tests. However, in combination with
LIBNM_CLIENT_DEBUG_FILE this can be very useful.
Preserve and pass on the environment variables, if set.
(cherry picked from commit 1630009234)
Sort imports by name. Also avoid "from signal import SIGINT". I find
it ugly to import names in the current namespace. "SIGINT" should be
refered to by its full name, including the package/namespace.
(cherry picked from commit ee17346cee)
