Remove NMAPSecurity objects, they are replaced with flags on the APs for
each AP's capabilities, and by NMConnection/NMSettings objects for user
defined connections.
* include/NetworkManager.h
- Redefine 802.11 security properties. There are now device capabilities
and AP flags and AP security flags. It was way to unclear before.
* src/Makefile.am
src/nm-ap-security-leap.h
src/nm-ap-security-leap.c
src/nm-ap-security-wpa-eap.c
src/nm-ap-security-wpa-eap.h
src/nm-ap-security-private.h
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-psk.h
src/nm-ap-security-wep.c
src/nm-ap-security-wep.h
src/nm-ap-security.c
src/nm-ap-security.h
- Removed, to be replaced with NMConnection/NMSettings objects
* src/nm-dbus-nmi.c
src/nm-dbus-nmi.h
- Removed, to be replaced by code that talks to the new info daemon
interface and gets NMConnection/NMSettings objects
* src/backends/NetworkManagerSuSE.c
- Remove usage of NMAPSecurity; should be replaced by a system-level
info-daemon that does the same thing but talks the new info-daemon
D-Bus interface
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
src/NetworkManagerAPList.c
libnm-glib/libnm-glib-test.c
- Remove usage of NMAPSecurity objects and adjust to new flags for
WPA/RSN
* libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
introspection/nm-access-point.xml
test/nm-tool.c
- Adjust to new flags for AP security
* utils/nm-utils.c
utils/nm-utils.h
src/vpn-manager/nm-dbus-vpn.c
- Remove D-Bus pending call stuff from nm-utils and put it in the VPN
stuff which is the only place it's used
* src/nm-device-interface.c
src/nm-device-interface.h
introspection/nm-device.xml
src/nm-activation-request.c
src/nm-activation-request.h
src/nm-device.c
- Add a new 'specific_object' argument that hints to NM what actual
AP or other device-specific thing the connection should apply to.
NMConnection objects can apply to more than one actual device/AP.
* libnm-util/nm-connection.c
* libnm-util/nm-connection.h
- Add 'have_secrets" call stubs
* libnm-util/cipher.h
- Move NM_AUTH_TYPE_* defines here for now
* src/nm-device-802-11-wireless.c
- Remove usage of NMAPSecurity, to be replaced with NMConnection/
NMSettings objects
* src/NetworkManagerDbus.c
* src/NetworkManagerPolicy.c
- Remove usage of update_allowed_networks, should be pushing data in
a different manner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Link with libnm-util to gain access to
NMConnection.
* libnm-glib/nm-device-802-11-wireless.c:
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device-802-3-ethernet.c
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device.c (nm_device_activate): Implement.
* src/nm-device-802-3-ethernet.c: Implement the new activation using
NMConnection.
* src/nm-device-802-11-wireless.c: Store an activation AP once the
activation has started.
Implement the new activation using NMConnection.
* src/nm-activation-request.c: Store a generic connection object instead
of a wireless-specific AP.
* src/NetworkManagerPolicy.c (create_connection): Implement. Depending
on device type, create a device specific connection object suitable for
device activation.
* src/nm-device.c (nm_device_activate): Re-implement. Call the device
specific check to validate the connection and on success start the
activation.
* src/nm-device-interface.h: Add a activate virtual function to the
interface definition.
* src/nm-device-interface.c (nm_device_interface_activate): Implement.
(impl_device_activate): Implement.
* introspection/nm-device.xml: Add a generic device activation interface
that accepts an abstract NMConnection structure that has device-specific
information in it.
* introspection/nm-device-802-3-ethernet.xml: Remove the wired-specific
activation interface.
* introspection/nm-device-802-11-wireless.xml: Remove the wireless-specific
activation interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device.c (nm_device_get_description): Implement.
* libnm-glib/nm-client.c (nm_client_manager_is_running): Implement. Also add a
"manager-running" signal that notifies the appearance/disappearance of NM.
(nm_client_sleep): Implement.
* libnm-glib/nm-device.c:
* libnm-glib/nm-device-802-11-wireless.c:
* libnm-glib/nm-device-802-3-ethernet.c:
Don't inherit from DBusGProxy, add a proxy to private
data. The reason is, classes inherited from NMDevice wouldn't get any dbus signals
for anything but their own dbus interface. DBusGProxy objects support only one
interfaces and to work around this, NMDevice has spearate proxy for each dbus
interface. The nice side effect of this change is that we do not create a new
DBusGProxy object for each property access.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2479 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list.
We get signalled when it changes.
* libnm-glib/nm-client.c: Cache NMState and device list, we get signalled
when it changes.
* libnm-glib/nm-device.c: Cache the device state property.
* libnm-glib/nm-access-point.c: Cache the strength property.
* src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler.
The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0)
and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan
until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while
the device is down, activating, or activated (in case of A/B/G cards).
Remove some old dead ifdef'ed out code that used to configure wireless devices,
it's all done through supplicant now.
* src/supplicant-manager/nm-supplicant-interface.c: Fix the reference
counting issues with pending calls which caused leaks and crashes when
interface was removed (now that the interface actually gets removed).
* src/nm-call-store.c: Make a copy of data before running a foreach
with user callback on it - The most common usage pattern is to cancel
(and thus remove) all pending calls with foreach which would modify
the hash table we're iterating over.
* src/nm-manager.c: When a device is added, make sure it is "up". When
it's removed or disabled due to disabling wireless or networking, bring
it down.
* include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN.
* src/nm-device-802-11-wireless.c:
* src/nm-device-802-3-ethernet.c:
* src/nm-device.c:
- Remove "init" virtual function, all gobjects have a place for that
already (constructor).
- Replace "start" virtual function with "bring_up", devices can be
brought up and down more than just on startup now.
- Add "is_up" virtual function.
- Implement one way to bring a device down instead of previous 4 different
ways, each of witch did something different.
* src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice,
all it needs is the device interface.
Get rid of NMData.dev_list (3 members to go).
Get rif of NMData in a lot of places.
* gnome/libnm_glib/libnm_glib.c: Make it compile again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-manager.c: Handle the DBUS state changes itself.
Handle device state changes and disconnect VPN if it's device deactivates.
* src/nm-dbus-nm.c:
* src/nm-dbus-nm.h:
* src/nm-dbus-device.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/nm-dbus-net.h: Remove. All of it is implemented byt the new dbus API.
* src/NetworkManagerMain.h: Get rid of all but 3 properties of NMData.
* src/nm-device.c (nm_device_get_by_udi):
(nm_device_get_by_iface): Remove. This doesn't belong here and is already
implemented in the correct location (NMManager).
Rip out all the test_device stuff.
* src/NetworkManagerPolicy.c: Remove the leftover activation success and
failure handlers, it's all done by NMDevice already.
* src/NetworkManager.c: Move the signal handling here from nm-logging.c
Remove the iochannel hack to route the unix signals to the main thread since
we're not threaded anymore.
* src/NetworkManagerAP.c: Implement HWAddress property.
* src/NetworkManagerDbus.c: Remove the dbus signal sending code, it happens
automatically with dbus-glib.
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h:
- Move it low in the class hierarchy, don't reference any NM types.
- Remove private data from the header.
- Use type safe checks in public API methods.
- Make it a singleton so we don't have to pass the single reference around.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2339 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-ip4-config.xml: Implement.
* libnm-glib/libnm-glib-test.c: Use new DBUS API in tests.
* libnm-glib/nm-ip4-config.c:
* libnm-glib/nm-ip4-config.c: Implement.
* src/nm-ap-security[-*]: Remove circular dependencies between APs and AP
securities. APs reference security.
* src/nm-device-802-11-wireless.c: Implement missing properties that need to
be exported over DBUS.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/NetworkManagerAP.c:
* src/NetworkManagerAP.h:
- Convert to GObject, export over DBUS.
* src/nm-ip4-config.h:
* src/nm-ip4-config.h:
- Convert to GObject, export over DBUS.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Totally break NetworkManager. Please use 0.6 branch until futher notice.
* src/:
- Remove old low-level dbus interface implementations and replace them
with dbus-glib one.
* configure.in:
- Require dbus-glib >= 0.72.
- Plug in new sources to build.
* libnm-glib/:
- Implement GObject wrappers on top of DBUS glib auto-generated bindings
to make it more convenient to use from GObject based programs.
* introspection/:
- Implement DBUS XML introspection files, used by both NM and libnm-glib.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
