* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add "artificial" get/set functions, set for APs that
aren't discovered as part of a scan but instead
discovered by force-setting the ESSID
* src/NetworkManagerDevice.[ch]
- (nm_device_wireless_network_exists): pass back whether
or not the discovered AP was encrypted. Also, try
falling back to encrypted mode on the card if unencrypted
association doesn't work
- (nm_device_find_and_use_essid): If the network requested
did in fact exists, but it wasn't in our scan list, add
an "artificial" entry for it. Some Cisco cards don't
see non-ESSID-broadcasting APs in their scan but can still
associate with them if you know the ESSID, this works around
that behavior
- (nm_device_do_normal_scan): Carry "artificial" APs over from scan
to scan if the card is currently associated with that AP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
- (nm_ap_new, nm_ap_new_from_ap): Don't crash when we don't have
enough RAM to allocate new AP structures, but return NULL instead
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_is_empty): new function
- (nm_ap_list_combine): new function, combine two access point lists
- (nm_ap_list_copy_keys): new function, copy keys from one list
into another
* src/NetworkManagerDevice.[ch]
- Rename some functions to be clearer:
nm_device_get_best_ap_frozen -> nm_device_is_best_ap_frozen
nm_device_just_activated -> nm_device_is_just_activated
nm_device_activating -> nm_device_is_activating
nm_device_now_scanning -> nm_device_is_scanning
- Cache the last 4 scans so that the access point list is more stable.
We combine the lastest two scans and use that as the AP list,
and diff that combined list against the combination of the earliest
two cached scans for the WirelessNetworkAppeared/Dissappeared signals
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@210 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.[ch]
info-dameon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.[ch]
- Preserve original label text in the passphrase dialog so that
it actually gets updated with the new network name the next
time around. Previously, we were overwriting it so you'd get
the wrong network name to enter a key for
- Add a "Key Type" combo to the passphrase dialog, user selects
encryption key type now, type is stored in GConf too
- Adjust NM<->NMI DBUS protocol to pass the key type back to NM too
* src/NetworkManagerAP.[ch]
- Remove all the encyption method magic. It's now set by the user
and NetworkManager retrieves the type of encryption key from
NetworkManagerInfo
* src/NetworkManagerAPList.[ch]
src/NetworkManagerDbus.[ch]
- Adjust to new way of setting encryption key and method
- Pull encryption method down from NMI along with key
* src/NetworkManagerDevice.[ch]
- Removed encryption method fallback magic as the method is now
determined by the user. This greatly simplifies the connection
logic.
- More robust connection/link logic. Besides removing the encryption
method fallback magic, check whether or not the card is receiving
invalidly encrypted packets, which usually indicates that we have
a bad WEP key set.
- Don't blindly forge ahead when DHCP fails (still not completely fixed)
* test/nminfotest.c
- Test out new "Key Type" stuff in the NMI passphrase dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@195 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO: fix typo
* docs/NetworkManager DBUS API.txt
- Update for new signal strength changes
* panel-applet/NMWirelessApplet.c
- Make panel icon show strength of the current connection
- Cleanups and memleak fixes
* panel-applet/NMWirelessApplet.h
- Add data members for signal strength on devices and networks
* panel-applet/NMWirelessAppletDbus.c
- Free more DBusErrors
- Update for new signal strength changes
- Make devices and networks more like real objects, use ref/unref methods
- Actually unlock the mutex when updating the active device
* src/NetworkManagerAP.c
- Change AP functions and data members from "quality"->"strength"
* src/NetworkManagerDbus.c
- Kill "getMaxQuality" and "getQuality" methods
- Add "getStrength" methods for Networks and Devices
* src/NetworkManagerDevice.[ch]
- Add accessors for device strength
- Add functions to update strength for a device. Note that not all drivers
actually support signal strength for scanned access points (Atmel drivers
being one)
- Calculate signal strength for each AP during scan
* src/NetworkManagerWireless.[ch]
- Add function to return signal strength % from a device and a raw quality struct
* test/nmclienttest.c
- Update for new signal strength changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c (nm_dbus_get_network_timestamp): Return
a GTimeVal instead of time_t. This is easier to work with,
since time_t may be a long or double, we don't know.
* src/NetworkManagerDbus.h: Update prototype.
* src/NetworkManagerAP.c (struct NMAccessPoint): Store a GTimeVal
instead of time_t.
(nm_ap_get_timestamp): Update to return GTimeVal.
(nm_ap_set_timestamp): Update to take GTimeVal.
* src/NetworkManagerAPList.c (nm_ap_list_update_network): Handle
GTimeVal change.
(nm_ap_list_print_members): Fix warnings in printf format.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@103 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.[ch]
- Add a "enc_method_good" member and accessors to an Access Point
to signal when we've found the correct encryption method
for an access point
- Add a "timestamp" member and accessors, remove "priority" member
and accessors (use timestamps instead)
- Rename "wep_key"->"enc_key"
- (nm_ap_get_enc_key_hashed): new, return the correct mangled key
for a specified encryption method using the access points
source encryption key/passphrase
* src/NetworkManagerAPList.c
- When updating a network with dbus, grab timestamp now instead of
priority
* src/NetworkManagerDBus.[ch]
- Add signal for "DeviceActivating"
- Switch priority->timestamp
* src/NetworkManagerDevice.c
- Change references of "wep_key" -> "enc_key" or "key"
- Signal DeviceActivating when starting activation
- When activating a wireless device, if the access point we are connecting
to is encrypted, and we have a source key, try to generate a mangled
key and use that (ie, generate real WEP key from a passphrase)
- Rework device activation to fallback to other encryption methods if
a previous one didn't work (ie, try mangling a key as a 104-bit passphrase
first, then if that doesn't work fall back to direct hex key).
- (nm_device_update_best_ap): fix a deadlock, and use timestamps instead of
priority. We now prefer the latest access point used, rather than using
a priority scheme
- (nm_device_do_normal_scan): make the encryption method "unknown" on access
points we've just discovered, and merge in correct info from the global
access point lists
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@68 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO
- new task: proper logging support
* info-daemon/NetworkManagerInfo.c
- Correct spelling of "canceled"
- Correct casting of objects for g_signal_connect()
* info-daemon/NetworkManagerInfoDbus.c
- Add defines for NetworkManager namespace and object path, and use them
- Add filter function to trap new signals from NetworkManager:
WirelessNetworkAppeared, WirelessNetworkDisappeared
* info-daemon/passphrase.glade
- Change name of "ok" button to "Login to Network..."
- Mark invisible
* src/NetworkManager.c
- Code and debug message cleanups
- Rename "nm_add_current_devices"->"nm_add_initial_devices"
- (nm_add_initial_devices) Check returned string array of devices
and don't try to add devices if array is NULL
- (main) Initialize libhal a bit later, make code a bit clearer
* src/NetworkManagerAP.[ch]
- New accessor and data member "matched": used to speed up AP list
diffing
- New accessor and data member "enc_method": will be used during key
fallback to cache which passphrase->key conversion actually works
so we don't have to do it every time
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_find_ap_in_list) New: find an AP by essid in an AP list
- (nm_ap_list_diff) New: given two lists of access points, find the differences
between them, and send WirelessNetworkAppeared/Disappeared signals over
dbus in response to those differences
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_object_path_from_ap) New: given a device and an access point,
make an object path for that access point (NOTE that we don't yet check to
make sure that access point is actually in the device's AP list yet)
- (nm_dbus_get_ap_from_object_path) Renamed from nm_dbus_get_network_from_object_path
- (nm_dbus_signal_wireless_network_appeared, nm_dbus_signal_wireless_network_disappeared)
New: signal appearance/disappearance of wireless networks
- (nm_dbus_set_user_key_for_network) Mark the network/ap as invalid if the user cancelled
key entry
* src/NetworkManagerDevice.[ch]
- (nm_device_ap_list_clear) Use nm_ap_list_free rather than doing it ourselves
- (nm_device_ap_list_get) New: return the AP list (static function)
- (nm_device_do_normal_scan) Destroy old AP list later, so that we can diff the
new one resulting from the scan with the old one
* src/NetworkManagerWireless.c
- (nm_wireless_is_most_prefered_ap) "invalid" access points cannot be "best" access points
* test/nminfotest.c
- #define object paths and namespaces and use the #defines rather than static strings
- Test out user-key functionality of NetworkManagerInfo too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@33 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove various Makefile.in files
* TODO
- Add some more items
* configure.in
- Add checks for OpenSSL/md5 headers and libs
* src/Makefile.am
- Use OpenSSL CFLAGS
* src/NetworkManagerAP.[ch]
- Remove 'stamp' functions, replace with 'invalid' functions
to support user cancelling WEP key entry
* src/NetworkManagerDbus.c
- Remove 'stamp' return functions
- Treat returned user key as a passphrase and convert to a WEP key,
but don't actually use the WEP key yet. We use the returned user
key as a hexadecimal WEP key until we can figure out a UI for
passphrase-vs-hex key
* src/NetworkManagerWireless.[ch]
- Add passphrase-to-128bit-key function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@28 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am
- Turn on warnings
* src/NetworkManager.c
- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
that doing the deactivation ourselves
- Cancel an pending actions on a device if its being removed
- Break up link state checking a bit, make non-active wireless cards
deactivated to save power
- Remove unused variables
* src/NetworkManager.h
- Add support for "pending" device
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
- Add support for determining whether and AP has encryption enabled or not
- AP address is now "struct ether_addr" rather than a string
* src/NetworkManagerDbus.h
src/NetworkManagerDbus.c
- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
- Changes for AP address from struct ether_addr->string
* src/NetworkManagerDevice.h
src/NetworkManagerDevice.c
- Remove unused variables, fix warnings
- Add support for Pending Actions (things that block a device from being "active"
until they are completed).
- First pending action: Get a WEP key from the user
- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
- Update wireless link checking to try to determine if the AP we are associated
with is correct, but the WEP key we are using is just wrong. If its wrong,
trigger the GetUserKey pending action on the device
- If dhclient can't get an IP address, it brings the device down. Bring it back
up in that case, otherwise we can't scan or link-check on it
- Add IP address change notifications at appropriate points (still needs some work)
- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not
* src/NetworkManagerPolicy.h
src/NetworkManagerPolicy.c
- Split out "best" access point determiniation into separate function
- Make device activation 2-stage: first the device is pending, then
in the next iteration through it becomes "active" unless it has
pending actions
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Clean up unused variables and warnings
- Wrap our debug macros in {} to prevent possible confusion
* src/NetworkManagerWireless.c
- Forgot to return current best priority, which lead to last available AP always
being chosen no matter what its priority was. Corrected.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@15 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
