This was causing test_nml_dbus_meta() unit test to fail and also it was
affecting the notification when the object changed.
Fixes: 5426bdf4a1 ('HSR: add support to HSR/PRP interface')
(cherry picked from commit 1e70f24378)
The setting was missing from the script. The patch is adding it and also
regenerates the docs.
Fixes: 5426bdf4a1 ('HSR: add support to HSR/PRP interface')
(cherry picked from commit a0696e27b8)
The HSR DBus metadata was defined properly but not exported on the libnm
library properly. This was causing that clients were not showing the HSR
devices.
Fixes: 5426bdf4a1 ('HSR: add support to HSR/PRP interface')
(cherry picked from commit 5e4696a693)
When the attach_port()/detach_port() methods do not return immediately
(currently, only for OVS ports), the following situation can arise:
- nm_device_controller_attach_port() starts the attachment by sending
the command to ovsdb. Note that here we don't set
`PortInfo->port_is_attached` to TRUE yet; that happens only after
the asynchronous command returns;
- the activation of the port gets interrupted because the connection
is deleted;
- the port device enters the deactivating state, triggering function
port_state_changed()
- the function calls nm_device_controller_release_port() which checks
whether the port is already attached; since
`PortInfo->port_is_attached` is not set yet, it assumes the port
doesn't need to be detached;
- in the meantime, the ovsdb operation succeeds. As a consequence,
the kernel link is created even if the connection no longer exists.
Fix this by turning `port_is_attached` into a tri-state variable that
also tracks when the port is attaching. When it is, we need to perform
an explicit detach during deactivation.
Fixes: 9fcbc6b37d ('device: make attach_port() asynchronous')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2043
Resolves: https://issues.redhat.com/browse/RHEL-58026
(cherry picked from commit a8329587c8)
When handling event TIMEOUT, "acd_data->probing_timeout_msec" needs to
be always initialized before jumping to "handle_start_probing:";
otherwise, an assertion failure is triggered at:
static void
_l3_acd_data_timeout_schedule_probing_restart(AcdData *acd_data, gint64 now_msec)
{
...
nm_assert(acd_data->probing_timeout_msec > 0);
Even if the ACD data is already in state PROBE, that doesn't mean that
the timeout is already initialized because the PROBE state can also be
reached from a INSTANCE_RESET event; and depending on the previous
state "acd_data->probing_timeout_msec" could be uninitialized.
Fixes-test: @iptunnel_restart
Fixes: b8f9d7b5dd ('l3cfg: rework ACD handling in NML3Cfg to support handling conflicts')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2023
(cherry picked from commit a09f9cc616)
Previously, the "edit" or "delete" buttons were clickable even
if there were no available connections, which was not expected
and caused an assertion to fail when clicked. This is because
the connections list could contain connections that were later
filtered out and not displayed in the final list, but the check
did not take this into account.
Make it so that the buttons are clickable only if we *actually*
have any available connections to edit or delete.
Fixes: 3bda3fb60c ('nmtui: initial import of nmtui')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1991
(cherry picked from commit c9fefcd095)
The "StartLimitIntervalSec" and "StartLimitBurst" directives should be
in the [Unit] section instead of the [Service] one.
Fixes: 927cff9f17 ('cloud-setup: allow bigger restart bursts')
(cherry picked from commit a531458456)
When using the netdev datapath, we wait for the link to appear in
different steps:
1. initially, in act_stage3_ip_config() connects to platform's
"link-changed" signal to detect when the TUN interface appears;
2. when the interface appears, _netdev_tun_link_cb() schedules
_set_ip_ifindex_tun() in a idle handler;
3. _set_ip_ifindex_tun() checks if the link is ready (e.g. if the MAC
address is correct) and in that case it reschedules stage3, which
will move forward with the activation;
4. if the link is not ready in _set_ip_ifindex_tun(), the function
connects again to platform's "link-changed" signal to react to link
changes;
5. after the link changes and it is ready, _netdev_tun_link_cb()
reschedules stage3, which moves forward with the activation;
With the current implementation it is possible that after step 2, if
act_stage3_ip_config() runs because it was already scheduled, it
registers again to the "link-changed" event; then when
_set_ip_ifindex_tun() is invoked it will hit assertion:
nm_assert(!priv->wait_link.tun_link_signal_id);
Fix this by preventing that the signal gets registered again after
step 2.
Fixes-test: @ovs_datapath_type_netdev_with_cloned_mac
Fixes: acf485196c ('ovs-interface: wait that the cloned MAC changes instead of setting it')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2024
(cherry picked from commit b6e69f3467)
The code handling options with supposes, that options
are split by `=`, which is not the case. This fixes the following:
```
nmcli -f ipv4.ad\t\t
nmcli -f ipv4.ad=ipv4.addresses
nmcli --field ipv4.ad\t\t
nmcli --field ipv4.ad=ipv4.addresses
```
Using options with values separated with `=` remains broken,
but this change doesn't affect it:
```
nmcli --field=ipv4.ad\t\t
nmcli --field=ipv4.ad
```
Also, `man` and `usage` uses `--color auto|yes|no`,
not `--color=auto|yes|no`. So, this fix should be sufficient.
Bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=2115827
Managed type = managed is a bit unclear, because all managed types are
for devices that are managed, but with different levels. Managed type =
managed could be interpreted as other types are unmanaged. Change it to
managed type = full.
The primary address is that placed at position 0 of all the IP Addresses
of the interface. Sometimes we put it in a different position in the
ipv4s array because we insert them in the order we receive, but it might
happen that the HTTP responses comes back in wrong order.
In order to solve this, we pass the index of the IPv4 address to the
callback and the address is added in the right position directly.
Co-authored-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
On daemon startup, we may end up enqueueing many nm-cloud-setup.service
restarts in very a short time. That is perfectly fine, just bump the
thresholds so that systemd doesn't get in the way too quickly.
100 requests in 1 seconds seem like a fair choice -- little bit on the
conservative side, yet still giving the service manager some room to
interfere on a chance things really go awry.
https://issues.redhat.com/browse/RHEL-49694
Don't enforce IP cleanup when devices are in deactivating state, to
make sure that network connection is still available for pre-down
dispatcher phase.
Fixes ac4e63ddda ('ip: support dhcp-send-release in NMSettingIpConfig')
https://bugzilla.suse.com/show_bug.cgi?id=1228154
Attempt to tab-complete a property from a setting which does not exist
results in an assertion failure:
nmcli > set lala.lala<TAB>
(process:597363): nm-CRITICAL **: 16:30:21.642: nm_meta_setting_info_editor_find_by_name: assertion 'setting_name' failed
Thread 1 "nmcli" received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff780dc28 in g_logv () from /lib64/libglib-2.0.so.0
(gdb) bt
#0 0x00007ffff780dc28 in g_logv () at /lib64/libglib-2.0.so.0
#1 0x00007ffff780dea3 in g_log () at /lib64/libglib-2.0.so.0
#2 0x000000000044a2c2 in nm_meta_setting_info_editor_find_by_name (setting_name=<optimized out>, use_alias=use_alias@entry=0)
at src/libnmc-setting/nm-meta-setting-access.c:35
#3 0x000000000042eb07 in get_setting_and_property (prompt=<optimized out>, line=<optimized out>, setting_out=0x7fffffffcf10, property_out=0x7fffffffcf18)
at src/nmcli/connections.c:6639
#4 0x000000000042ec38 in get_allowed_property_values (out_to_free=out_to_free@entry=0x7fffffffcf50) at src/nmcli/connections.c:6711
#5 0x000000000042ed8c in should_complete_property_values (prompt=prompt@entry=0x5befb0 "nmcli 802-1x.pac-file> ", line=line@entry=0x0, multi=multi@entry=0x7fffffffcfe4)
at src/nmcli/connections.c:6735
#6 0x000000000042f5d8 in nmcli_editor_tab_completion (text=0x5bef90 "lala", start=<optimized out>, end=13) at src/nmcli/connections.c:6899
#7 0x00007ffff776dcdc in gen_completion_matches () at /lib64/libreadline.so.8
...
Do not proceed resolving the setting name if it does not pass
check_valid_name().
In case the user selects a setting/property with "goto" command, and
then attempts to tab-complete a setting/property pair, the original sett
and prop strings are overriden without freeing:
nmcli > goto 802-1x.pac-file
nmcli 802-1x.pac-file> set 802-1.lal<TAB>
Fixes: 79bc271685 ('cli: TAB-completion for enum-style property values (rh #1034126)')
Currently if the system hostname can't be determined, NetworkManager
only retries when something changes: a new address is added, the DHCP
lease changes, etc.
However, it might happen that the current failure in looking up the
hostname is caused by an external factor, like a temporary outage of
the DNS server.
Add a mechanism to retry the resolution with an increasing timeout.
https://issues.redhat.com/browse/RHEL-17972
If the socket's RX buffer is full it's probably because other
process is doing lot of changes very quickly, faster than we
can process them. Let's give the writer a small time to finish:
1. Avoid contending the kernel's RTNL lock, so we don't make
the whole situation even worse and it can finish earlier.
2. Avoid having to resync again and again due to trying to
resync while the writer is still doing quick changes, so
we are unable to catch up yet.
This won't help if this situation takes a long time or is
continuous, but that's unlikely to happen, and if it does,
it's the writer's fault for starving the whole system.
There is no need to progresively increase the backoff time
for the same reason: if this situation takes lot of time,
it's the writer's fault. It's neither a good idea because the whole NM
process will end being sleeping long times, not doing anything at all,
without being able to react when the Netlink messages burst stops.
Add a function to compare two arrays of NMPlatformBridgeVlan. It will
be used in the next commit to compare the VLANs from platform to the
ones we want to set.
To compare in a performant way, the vlans need to be normalized (no
duplicated VLANS, ranges into their minimal expression...). Add the
function nmp_utils_bridge_vlan_normalize.
Co-authored-by: Íñigo Huguet <ihuguet@redhat.com>
For now, always reapply the VLANs unconditionally, even if they didn't
change in kernel.
To set again the VLANs on the port we need to clear all the existing
one before. However, this deletes also the VLAN for the default-pvid
on the bridge. Therefore, we need some additional logic to inject the
default-pvid in the list of VLANs.
Co-authored-by: Íñigo Huguet <ihuguet@redhat.com>
Currently, nm_platform_link_set_bridge_vlans() accepts an array of
pointers to vlan objects; to avoid multiple allocations,
setting_vlans_to_platform() creates the array by piggybacking the
actual data after the pointers array.
In the next commits, the array will need to be manipulated and
extended, which is difficult with the current structure. Instead, pass
separately an array of objects and its size.
During nm_lldp_neighbor_parse(), the NMLldpNeighbor is not yet added to
the NMLldpRX instance. Consequently, n->lldp_rx is NULL.
Note how we use lldp_x for logging, because we need it for the context
for which interface the logging statement is.
Thus, those debug logging statements will follow a NULL pointer and lead
to a crash.
Fixes: 630de288d2 ('lldp: add libnm-lldp as fork of systemd's sd_lldp_rx')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1550
As part of the conscious language effort we must provide an alternative
option to configure autoconnect-ports system-wide on NetworkManager
configuration file.
The in_buffer is initialized with a NULL buffer. If we never receive and
data, the buffer might still be NULL.
Maybe it actually can never happen, but it's not clear that this is
always the case. To be sure, ensure we don't return a NULL buffer on
success.
As part of the conscious language efforts we are not writing offensive
terms into keyfiles anymore. This won't break users upgrading as we
still read such values if they are present into the keyfile.
For existing profiles, NetworkManager will remove the offensive terms
when editing the keyfile.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2009
In case the platform fails dumping a specific route protocol, retry
multiple times. If all attempts fail, emit a warning and proceed as
there is nothing more to do.
When doing a dump of routes, we want to exclude routes having
protocols we do not care about. Since the netlink socket has
STRICT_CHK enabled, we can request multiple dumps for the protocols we
need.
While doing 6 dumps is less efficient than doing 1, it normally
doesn't matter. However, the new implementation is more efficient when
there are e.g. millions of BGP routes that can be excluded from the
results.
Introduce an array of tracked route protocols that will be used in the
next commit. To have the list of protocols defined in a single place,
define a macro.
When building on musl systems ( with out systemd ), and using LLD linker
from LLVM project we fail to link with undefined symbols.
This symbol is in sd_id128.c but its disabled, so let disable the functions
which need this function.
| x86_64-yoe-linux-musl-ld.lld: error: undefined symbol: sd_id128_get_machine_app_specific
| >>> referenced by sd-dhcp-duid.c:202 (/usr/src/debug/networkmanager/1.48.0/../NetworkManager-1.48.0/src/libnm-systemd-core/src/libsystemd-network/sd-dhcp-duid.c:202)
| >>> libnm-systemd-core.a.p/src_libsystemd-network_sd-dhcp-duid.c.o:(sd_dhcp_duid_set_uuid) in archive src/libnm-systemd-core/libnm-systemd-core.a
| x86_64-yoe-linux-musl-clang: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Not all setting names are valid values for the value of the connection's "type".
However, if a shortened value is introduced, all setting names are
considered, like in:
Error: bad connection type: 'eth' is ambiguous: ethernet, ethtool
Note that ethtool is not a valid value for "type".
Fix it by considering only "base" settings names.
It is possible that we learn the link is ready on stage3_ip_config
rather than in link_changed event due to a stage3_ip_config scheduled by
another component. In such cases, we proceed with IP configuration
without allocating the resources needed like initializing DHCP client.
In order to avoid that, if we learn during stage3_ip_config that the
link is now ready, we need to schedule another stage3_ip_config to
allocate the resources we might need.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2004
Fixes: 83bf7a8cdb ('ovs: wait for the link to be ready before activating')
If we add multiple default routes with the same metric and different
preferences, kernel merges them into a single ECMP route, with overall
preference equal to the preference of the first route
added. Therefore, the preference of individual routes is not
respected.
To avoid that, add routes with different metrics if they have
different preferences, so that they are not merged together.
We could configure only the route(s) with highest preference ignoring
the others, and the effect would be the same. However, it is better to
add all routes so that users can easily see from "ip route" that there
are multiple routers available.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1468https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1983
Fixes: 032b4e4371 ('core: use router preference for IPv6 routes')
When activating an ovs-interface we already wait for the cloned MAC
address to be set, ifindex is present and platform link also present but
in some cases this is not enough.
If an udev rule is in place it might modify the interface when it is in
a later stage of the activation causing some race conditions or
problems. In order to solve that, we must wait until the link is fully
initialized.
We are currently asserting that the list of devices waiting for
auto-activation in NMPolicy is not empty. This condition is always
false because:
- NMDevice holds a reference to NMManager
- NMManager holds a reference to NMPolicy
- on dispose, NMDevice asserts that it's not in NMPolicy's
auto-activate list
Therefore if there is any NMDevice alive, NMPolicy must be alive as
well. Instead, if there is no NMDevice alive the list must be empty.
The assertion could fail only when the NMPolicy instance gets
disposed, which usually doesn't happen because it's still referenced
at shutdown.
Fixes: aede228974 ('core: assert that devices are not registered when disposing NMPolicy')
