Use PolicyKit to authorize the system settings' AddConnection method
and the system settings connections' Update and Delete methods.
* libnm-glib/nm-settings.c (impl_exported_connection_update)
(impl_exported_connection_delete, nm_exported_connection_update)
(nm_exported_connection_delete): Return boolean and fill GError
to notify the callers of the reasons why it might have failed.
* libnm-glib/nm-dbus-settings-system.c
(nm_dbus_settings_system_add_connection): Return the error from dbus
call so that the callers can see why it failed.
* libnm-glib/nm-dbus-connection.c (update, delete): Update the
signatures.
* system-settings/src/nm-polkit-helpers.[ch]: Implement.
* system-settings/src/nm-sysconfig-connection.[ch]: Implement. New
abstract base class that checks PolicyKit permissions.
* system-settings/src/dbus-settings.c:
(impl_settings_add_connection): Check the policy before carring out
the request.
* system-settings/plugins/keyfile/nm-keyfile-connection.c:
Inherit from NMSysconfigConnection, check the policies before
allowing updating or removing.
* system-settings/plugins/ifcfg-suse/nm-suse-connection.c:
Inherit from NMSysconfigConnection.
* introspection/nm-exported-connection.xml: Annotate "Update" and
"Delete" methods with async flag so that the implementations can get
access to DBusGMethodInvocation.
* system-settings/src/dbus-settings.c
(settings_add_connection_check_privileges): Implement.
(impl_settings_add_connection): Check the privileges before adding a new
connection. Improve error reporting.
* introspection/nm-settings-system.xml: Make the 'AddConnection' method
async so that the implementation can access DBusGMethodInvocation.
* configure.in: Check for PolicyKit.
* policy/org.freedesktop.network-manager-settings.system.policy:
New file.
* policy/Makefile.am: Install the policy file.
* configure.in: Add 'policy' subdir.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3646 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): clean up; update for changes to
NMIP4Config to support multiple IP addresses
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): update for multiple IP addresses
* src/nm-ip4-config.c
src/nm-ip4-config.h
- Store a list of IPv4 address/netmask/gateway tuples
- (nm_ip4_config_get_gateway, nm_ip4_config_set_gateway,
nm_ip4_config_get_netmask, nm_ip4_config_set_netmask,
nm_ip4_config_get_broadcast, nm_ip4_config_set_broadcast,
nm_ip4_config_set_address): remove
- (nm_ip4_config_take_address, nm_ip4_config_add_address,
nm_ip4_config_replace_address, nm_ip4_config_get_num_addresses):
new functions; handle multiple IPv4 addresses
* src/nm-device.c
src/ppp-manager/nm-ppp-manager.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
test/nm-tool.c
libnm-glib/libnm-glib-test.c
- update for changes to NMIP4Config for multiple IPv4 addresses
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if any address
is on the same subnet as the destination
- (check_one_address): ignore the exact match, just match family and
interface index
- (add_ip4_addresses): add all IPv4 addresses in an NMIP4Config to
an interface
- (nm_system_device_set_from_ip4_config): use add_ip4_addresses()
- (nm_system_vpn_device_set_from_ip4_config): use add_ip4_addresses()
* introspection/nm-ip4-config.xml
- Remove 'address', 'gateway', 'netmask', and 'broadcast' properties
- Add 'addresses' property which is an array of (uuu) tuples of
address/netmask/gateway
* libnm-util/nm-setting-ip4-config.c
- (set_property): use ip-address <-> GValue converters from nm-utils.c
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Handle D-Bus interface changes to support multiple IP addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-dbus-settings.c (constructor): Fix the
"PropertiesChanged" signal signature.
* libnm-glib/nm-dbus-connection.c (constructor): Use the common GType
defined in nm-dbus-glib-types.h.
Don't register the connection on dbus, we're a proxy class to
communicate with an already registered connection over dbus.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement new subclasses of NMSettings and NMExportedConnection to make
it easier for the applet to access and modify system settings.
* libnm-glib/nm-dbus-connection.[ch]:
* libnm-glib/nm-dbus-settings.[ch]:
* libnm-glib/nm-dbus-settings-system.[ch]: Implement.
* libnm-glib/Makefile.am: Add the new files to build, generate some more
bindings and glue.
* include/NetworkManager.h: Define the system settings DBus interface.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement additional C API for exported connections to make them identical
with the DBus API. Change the (list_connections) virtual function to be
more usable from C - instead of requiring implementers to return a GPtrArray
of dbus paths, return a list of connections.
* libnm-glib/nm-settings.c (nm_exported_connection_class_init): Fix a typo.
(nm_settings_list_connections):
(nm_exported_connection_new):
(nm_exported_connection_update):
(nm_exported_connection_delete): Implement.
(impl_settings_list_connections):
(impl_exported_connection_update):
(impl_exported_connection_delete): Use the new public functions to make
sure the C and dbus interfaces stay in sync.
* system-settings/src/dbus-settings.c (list_connections): Return a list of
connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement GKeyFile system settings plugin.
Implement writing system settings (currently supported only by GKeyFile plugin).
* system-settings/src/main.c:
* system-settings/src/dbus-settings.c: Move the communication with plugins
from main.c to dbus-settings.c. Makes it possible to talk to all registered
plugins for adding/updating/removing connections.
* system-settings/src/nm-system-config-interface.c
(nm_system_config_interface_add_connection): Implement
(nm_system_config_interface_update_connection): Implement.
(nm_system_config_interface_remove_connection): Implement.
* system-settings/plugins/keyfile/Makefile.am:
* system-settings/plugins/keyfile/plugin.[ch]:
* system-settings/plugins/keyfile/writer.[ch]:
* system-settings/plugins/keyfile/reader.[ch]: Implement.
* system-settings/plugins/Makefile.am: Add GKeyFile plugin.
* configure.in: Generate GKeyFile Makefile.
* libnm-glib/nm-settings.c (impl_exported_connection_get_id): Fix a memory
corruption, need to duplicate the returned string.
(impl_exported_connection_update): Implement.
(impl_exported_connection_delete): Implement.
* introspection/nm-settings-system.xml: Add "AddConnection" method.
* introspection/nm-exported-connection.xml: Add "Update" and "Delete" methods.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3587 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Remove exposure of wireless-tools mode types in the API.
* include/NetworkManager.h
- Define NM80211Mode enum
* introspection/generic-types.xml
- Describe NM_802_11_MODE enum
- Remove IW_MODE_* enum
* introspection/nm-access-point.xml
libnm-glib/nm-access-point.c
libnm-glib/nm-access-point.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* introspection/nm-device-802-11-wireless.xml
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-device-802-11-wireless.h
- 'mode' is now of type NM80211Mode, a DBUS_TYPE_UINT
* libnm-util/nm-setting-wireless.c
src/NetworkManagerAP.c
src/NetworkManagerAP.h
src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
test/nm-tool.c
- Use NM80211Mode not IW_MODE_*
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3562 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-object-cache.c
libnm-glib/nm-settings.c
src/dhcp-manager/nm-dhcp-manager.c
system-settings/plugins/ifcfg-fedora/plugin.c
system-settings/plugins/ifcfg-suse/plugin.c
system-settings/src/nm-system-config-hal-manager.c
libnm-util/nm-utils.c
- Remove usage of GStaticMutex since gcc-4.3 hates it and because we're
not threadsafe anyway
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3548 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (nm_exported_connection_get_id): new function
- (impl_exported_connection_get_id): use nm_exported_connection_get_id()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3528 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (activate_cb): pass the new active connection to callback; fix
message when no callback is specified
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3518 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* nm-object.c
- (nm_object_queue_notify): don't notify multiple times for the same
property
* nm-object-private.h
- (handle_ptr_array_return): return NULL if the given array is NULL or
if it has zero elements
* nm-ip4-config.c
- (finalize): use g_ptr_array_foreach() when freeing domains
- (nm_ip4_config_get_domains): use handle_ptr_array_return()
* nm-active-connection.c
- (nm_active_connection_get_devices): use handle_ptr_array_return()
* nm-device-802-11-wireless.c
nm-device-802-11-wireless.h
- (nm_device_802_11_wireless_get_access_points): return const; use
handle_ptr_array_return()
* nm-types.c
- (nm_object_array_demarshal): always create an array, even of length
zero, to distinguish between "NM returned no items" and "haven't
asked NM yet"
* nm-client.c
- (dispose): free active connections too
- (proxy_name_owner_changed): free active connections too when NM goes
away
- (nm_client_get_devices): return const; use handle_ptr_array_return()
- (nm_client_get_active_connections): use handle_ptr_array_return()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3506 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework VPN connection handling for a more consistent D-Bus API. The
VPNManager object has been removed, and active VPN connections are now the
same as any other active connection. The Manager object's ActivateConnection
and DeactivateConnection methods are used to start and stop a VPN connection,
and the VPNConnection objects are subclasses of the ActiveConnection objects.
When activating a VPN connection, pass the path of the active connection
to which the VPN connection is tied in the 'specific_object' argument.
Consequently, the libnm-glib API has been reworked to match this arrangement,
with the VPNManager object removed, and the NMVPNConnection objects now
being subclasses of NMActiveConnection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3504 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-active-connection.c
libnm-glib/nm-access-point.c
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-device.c
- (demarshal_ip4_config): distinguish between successful but missing
ip4-config request, and unsuccessful and missing ip4-config request
- (nm_device_get_ip4_config): don't try to demarshal a NULL ip4-config
path
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-device-802-11-wireless.c
- (demarshal_active_ap): distinguish between successfull but missing
active-ap request, and unsuccessful and missing active-ap request
- (dispose, clean_up_aps): consolidate AP list and active AP clearing
code
- (nm_device_802_11_wireless_set_wireless_enabled): add a private hook
for the NMClient to notify the device that wireless is disabled,
and therefore to clear the AP list and active AP
- Use nm_object_queue_notify() instead of g_object_notify()
* libnm-glib/nm-client.c
- (poke_wireless_devices_with_rf_status): new function
- (update_wireless_status): notify wireless devices of the rfkill status
so they can clean up if needed
- Use nm_object_queue_notify() instead of g_object_notify()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3502 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-client.c
- (client_device_added_proxy): add new devices to the internal device
list so they appear to clients
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3496 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Massive fixup of libnm-glib to:
a) have all objects (with the exception of VPN) cache their properties and
update them asynchronously on PropertiesChanged signals from NM
b) return internal const data for most attributes/properties instead of
allocated values that the caller must free
c) cache wrapped objects such that a given D-Bus path will always map to the
same GObject returned by libnm-glib
d) remove a few signals and move them to GObject property notifications
e) match recent NM D-Bus API changes for activation/deactivation
f) remove some private functions from libnm-glib headers
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3491 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- (ActivateConnection): return the object path of the active connection
on success
- (GetActiveConnections): remove
- (DeactivateConnection): new function; deactivate a currently active
connection
- Add an ActiveConnections property which returns an array of
active connection object paths
* introspection/nm-device.xml
- (Deactivate): remove
* introspection/all.xml
- Add ActiveConnection introspection
* introspection/nm-active-connection.xml
- Add the ActiveConnection object
* include/NetworkManager.h
- Add the Connection.Active D-Bus interface
* src/nm-device-interface.c
- (impl_device_deactivate): remove
* src/nm-activation-request.c
src/nm-activation-request.c
src/Makefile.am
- Implement the Connection.Active D-Bus interface
* src/nm-manager.c
- (get_property, nm_manager_class_init): add ACTIVE_CONNECTIONS property
- (nm_manager_activate_device): return the active connection path
- (connection_added_default_handler, impl_manager_activate_connection):
return the active connection to the caller
- (add_one_connection_element, impl_manager_get_active_connections):
remove
- (impl_manager_deactivate_connection): new function; deactivate an
active connection
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Remove Deactivate() function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3484 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* introspection/nm-manager.xml
introspection/nm-manager-client.xml
- Rename the ActivateDevice method to ActivateConnection to better
reflect it's usage; it's arguments get reordered a bit too
- Convert GetActiveConnections method return from a struct to a dict
* include/NetworkManager.h
- Define the dict keys for return value of GetActiveConnections
* src/nm-manager.c
- impl_manager_activate_device -> impl_manager_activate_connection
- (add_one_connection_element): return a populated hash table, not
a structure
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- nm_client_activate_device -> nm_client_activate_connection
- nm_client_free_active_connection_element -> nm_client_free_active_connections_element
- (nm_client_get_active_connections): return a GSList of GHashTables,
instead of the custom structures. Each element of the returned list
must be freed with nm_client_free_active_connections_element()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3482 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/wireless-helper.h
include/Makefile.am
- One place for all the junk needed for #including wireless.h
* test/nm-tool.c
src/NetworkManagerAP.c
src/wpa.c
src/Makefile.am
libnm-util/nm-utils.c
libnm-util/nm-setting-wireless.c
libnm-glib/nm-device-802-11-wireless.c
libnm-glib/nm-access-point.c
libnm-glib/libnm-glib-test.c
- include wireless-helper.h, not iwlib.h
* configure.in
- Don't need libiw really, just need to check for wireless.h
* src/kernel-types.h
- Remove; used types moved into wpa.c
* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_update_signal_strength,
real_get_generic_capabilities, nm_device_802_11_wireless_get_mode,
nm_device_802_11_wireless_set_mode,
nm_device_802_11_wireless_get_frequency,
nm_device_802_11_wireless_get_ssid,
nm_device_802_11_wireless_set_ssid,
nm_device_802_11_wireless_get_bitrate,
nm_device_802_11_wireless_get_bssid,
nm_device_802_11_wireless_disable_encryption): use ioctl() directly
instead of iwlib functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3462 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Change manager's StateChange signal to StateChanged for consistency.
* introspection/nm-manager.xml
- Add 'StateChanged' signal
- Move 'StateChange' down to the deprecated section
* src/nm-hal-manager.c
- (nm_hal_manager_new): connect to 'state-changed' instead
* src/NetworkManagerPolicy.c
- (nm_policy_new): connect to 'state-changed' instead
* src/nm-manager.c
src/nm-manager.h
- (nm_manager_update_state): emit both 'state-changed' and 'state-change'
- (nm_manager_class_init): add 'state-changed' and not the deprecation
of 'state-change'
* libnm-glib/nm-client.c
libnm-glib/nm-client.h
- (constructor, nm_client_class_init, client_state_changed_proxy):
track and proxy 'state-changed' instead of 'state-change'
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3393 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c
- (nm_get_device_driver_name): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
* libnm-glib/nm-device.c
- (get_product_and_vendor): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
- (nm_device_update_description): s/physical_device_udi/orig_dev_udi
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3386 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Global rename of NMConnectionSettings -> NMExportedConnection to cut down
on confusing names
* Add 'path' and 'scope' properties to NMConnection since both NM and the
applet were having to hack this in anyway. Remove the 'path' stuff from
NMExportedConnection
* Internally rename NMConnectionType -> NMConnectionScope
* Provide default implementations of the 'get_id' and 'get_settings' methods
of NMExportedConnection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3334 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device-802-11-wireless.c
- (get_access_point): move the "/" check here; check for invalid path
too
- (nm_device_802_11_wireless_set_active_ap): leave the "/" check up
to get_access_point()
- (access_point_added_proxy, access_point_removed_proxy): don't try
to send signals for non-existent access points
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3269 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/libnm_glib.c
- (libnm_glib_init): make thread joinable
- (libnm_glib_ctx_free): join thread on exit to clean up memory
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3265 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add CDMA mobile broadband card device type
* src/nm-hal-manager.c
- (modem_device_creator): handle both CDMA and GSM modems; the device
must now be tagged with 'cdma' or 'gsm' capability
* src/nm-cdma-device.c
src/nm-cdma-device.h
src/Makefile.am
- Add the CDMA mobile broadband card device class
* libnm-util/nm-connection.c
- (register_default_settings): add NMSettingCdma
* libnm-util/nm-setting-cdma.c
libnm-util/nm-setting-cdma.h
libnm-util/Makefile.am
- Add the CDMA mobile broadband card setting class
* libnm-glib/nm-cdma-device.c
libnm-glib/nm-cdma-device.h
libnm-glib/Makefile.am
- Add the CDMA mobile broadband card GLib proxy class
* libnm-glib/nm-client.c
- (get_device): handle CDMA devices too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
