src: Fixes in nm-device.c and nm-vpn-connection.c to update PacRunner
at the right place and moment. When a device goes up PacRunner is
configured with the Device IPxConfigs and Proxy Config. When it goes
down the same configuration is removed from PacRunner.
ifcfg-rh: Fixed to read and write proxy settings to the ifcfg network
scripts.
No need for the setter/getter of this property.
Immutable properties are so much nicer. Remove the setter and
ensure that the nm_plugin_missing property is only set during
object construction.
brcmfmac and possibly other drivers don't change the MAC address
right away, but instead the result is delayed. That is problematic
because we cannot continue activation before the MAC address is
settled.
Add a hack to workaround the issue by waiting until the MAC address
changed.
The previous attempt to workaround this was less intrusive: we would
just refresh the link once and check the result. But that turns out
not to be sufficent for all cases. Now, wait and poll.
https://bugzilla.gnome.org/show_bug.cgi?id=770456https://bugzilla.redhat.com/show_bug.cgi?id=1374023
- don't include "nm-default.h" in header files. Every source file must
include as first header "nm-default.h", thus our headers get the
default include already implicitly.
- we don't support compiling NetworkManager itself with a C++ compiler. Remove
G_BEGIN_DECLS/G_END_DECLS from internal headers. We do however support
users of libnm to use C++, thus they stay in public headers.
(cherry picked from commit f19aff8909)
Add statistics interface to all device instances. When active, the
properties of this interface are refreshed whenever there is network
activity for the device.
Activation is performed by changing RefreshRateMs property. If set to
zero, the interface is deactivated. If set to other value, the rest of
the interface properties are refreshed whenever the related network
metric changes, being RefreshRateMs the minimum time between property
changes, in milliseconds.
During shutdown, we unmanage Wi-Fi devices, and during NMDevice:deactivate()
we would reset to initial MAC address.
However, NMDeviceWifi:deactivate() would reset it again to the scanning one.
Fix that to properly restore the initial MAC address on the device
when NetworkManager exits.
Fixes: 4b2e375b33
Add new virtual function nm_device_unmanage_on_quit() to determine
whether to unmanage the device on shutdown.
This allows Wi-Fi devices to always be unmanaged. We want that to
reset the initial MAC address.
Both NMDeviceEthernet and NMDeviceWifi have a property "perm-hw-address".
As the hw_addr_perm property is tracked in the parent NMDevice class,
let it also implement the GObject property.
Then it knows better when to emit a notification about property
changes.
While a device is realized, we only want to read the permanent
MAC address once. If that fails, we fallback to the current MAC
address. Thus, we want the permanent address be stable until
the device unrealizes.
While we want to fallback to the current MAC address, in some cases
the caller wants to know whether this was a "real" permanent MAC
address as read via ethtool.
For example, when matching an ethernet device against ethernet.mac-address
property, the fake (current) address should not be used in such case.
The infiniband drivers don't implement the rtnetlink link deletions.
Therefore we unrealize the NMDevice instance but the backing resources
stay around, preventing us from ever realizing the device again.
This makes sure that devices like bond get their dhcp renewed
[thaller@redhat.com: original patch modified to rename
now-public function update_dynamic_ip_setup()]
https://bugzilla.gnome.org/show_bug.cgi?id=764398
We'll need to share the best conneciton logic and it's the only caller
of nm_device_get_available_connections(). Let's just move it all to
NMDevice and provide the best connection from there instead.
Since commit 87a3df2e57, the unmanaged
flag NM_UNMANAGED_USER_SETTINGS could be overwritten via an explict
user decision (NM_UNMANAGED_USER_EXPLICIT).
It makes sense to allow user configuration from file to be changable
by an explict user action via D-Bus at runtime.
However, it also changes behavior for devices that are currently explicitly
managed. Previously, a reload of the NM_UNMANAGED_USER_SETTINGS would
immediately unmanaged the device:
- for keyfile: send SIGHUP to reload NetworkManager.conf
- for ifcfg-rh: `nmcli connection [re]load`
So this change in behavior could negatively affect users who rely
on being able to configure "NM_CONTROLLED=no" and expect to unmanaged
the device immediately. Thus revert the change.
Note that NM_UNMANAGED_USER_SETTINGS is anyway ugly and should be
deprecated:
- for keyfile, why having the option "keyfile.unmanaged-devices"
instead of a generic options?
- for ifcfg-rh, why put per-device configuration in a per-connection
file?
The preferred way is to configure NM_UNMANAGED_USER_UDEV via
"ENV{NM_UNMANAGED}". Maybe we should also add a new configuration
scheme via NetworkManager.conf.
https://bugzilla.gnome.org/show_bug.cgi?id=762331
The NM_UNMANAGED_USER_SETTINGS flags are determined by the settings plugins.
That is, either:
- keyfile's "unmanaged-devices" configuration option
- ifcfg-rh's "NM_CONTROLLED" option
- ifnet's "managed" option
Rename NM_UNMANAGED_USER_CONFIG to NM_UNMANAGED_USER_SETTINGS to reflect
that it this is user configuration determined by the settings plugin.
Get rid of NM_UNMANAGED_DEFAULT and refine the interaction between
unmanaged flags, device state and managed property.
Previously, the NM_UNMANAGED_DEFAULT was special in that a device was
still considered managed if it had solely the NM_UNMANAGED_DEFAULT flag
set and its state was managed. Thus, whether the device (state) was managed,
depended on the device state too.
Now, a device is considered managed (or unmanaged) based on the unmanaged
flags and realization state alone. At the same time, the device state
directly corresponds to the managed property of the device. Of course,
while changing the unmanaged flags, that invariant is shortly violated
until the state transistion is complete.
Introduce more unmanaged flags whereas some of them are non-authorative.
For example, the EXTERNAL_DOWN flag has only effect as long as the user
didn't explicitly manage the device (NM_UNMANAGED_USER_EXPLICIT). In other
words, certain flags can render other flags ineffective. Whether the device
is considered managed depends on the flags but also at the explicitly unset flags.
In a way, this is similar to previous where NM_UNMANAGED_DEFAULT was ignored
(if no other flags were present).
Also, previously a device that was NM_UNMANAGED_DEFAULT and in disconnected
state would transition back to unmanaged. No longer do that. Once a device is
managed, it stays managed as long as the flags indicate it should be managed.
However, the user can also modify the unmanaged flags via the D-Bus API.
Also get rid or nm_device_finish_init(). That was previously called
by NMManager after add_device(). As we now realize devices (possibly
multiple times) this should be handled during realization.
https://bugzilla.gnome.org/show_bug.cgi?id=746566
NM_DEVICE_CHECK_CON_AVAILABLE_FOR_USER_REQUEST is a multi-flag value combining all
the hooks that compose a user-request. Add a special value that has no esplicit
meaning except that it ~is~ a user-request.
The idea of NMDevice:realize() was to
(1) update the device properties
(2) fail realization if some critical properties are missing
(1) is already done during nm_device_setup_start().
(2) was only implemented by NMDeviceVlan:realize(), but it
basically was just checking whether such a platform device exists.
Other implementations don't do that either and it opens up for a race
when the device gets deleted externally.
All implementations of NMDevice:setup_start() in derived classes
invoke the parent implementation first. Enforce that by moving
NMDevice:setup_start() to realize_start_setup() and only notify
derived classes afterwards via NMDevice:realize_start_notify().
In certain situations, ethernet links first appear with a zero MAC
address and then the MAC changes some time later. Currently NM does
not deal correctly with this scenario since it initializes wrong
@initial_hwaddr and @permanent_hwaddr on the device and tries to
immediately activate it.
To fix this, initialize the device's addresses only when the MAC
becomes valid and make the device available only at that point.
Let the link-add functions return the internal pointer to the platform
link object. Similar to link-get, which doesn't copy the link either.
Also adjust the sole users of the add-functions (create-and-realize)
to take the pointer.
Eventually we still copy the returned data, because accessing platform can
invalidate the returned pointer. Thus we don't actually safe any copying
by this (at least every use of the function currently leads to the data
being copied).
Still change it, because I think the API of NMPlatform should look like that.
NMPlatformLink is a plain struct (not a GObject, for which we usually
don't use const). We certainly don't want the functions to modify the
passed-in data.
This is to make it possible for the device factories to indicate the desired
link type and make it possible to avoid matching the unrealized device to a
platform device of different link type.
We often lookup the private data and retrieve it via NM_DEVICE_GET_PRIVATE(),
which in turn calls G_TYPE_INSTANCE_GET_PRIVATE().
Instead cache the pointer to the private data.
There are up- and downsides:
- requries additional sizeof(gpointer) bytes for each NMDevice.
+ retrieving the private pointer will be slightly faster.
+ easier debugging in gdb as it is currently often a pain to
retrieve the private data.
But most importantly, the allows to change our common pattern
to first cache the private data in a variable @priv. That is
often cumbersome to write, especially for short functions.
This change gives us a choice to use self->priv directly.
Such a change should not be aimed for every class. Instead it makes
mostly sense for NMDevice, where it pays off better due to the
class' size and ubiquitous use.
https://mail.gnome.org/archives/networkmanager-list/2015-December/msg00017.html
Instead of reimplementing the slave property in bond, bridge
and team, just add the property to the parent class. It's not
that the parent class would be agnostic to the master/slave
implementation, all the slaves are known to the every device
type implementation.
Also, the derived class doesn't know the correct time when
to invoke the notify-changed for the slaves property.
E.g. it should be only invoked after nm_device_slave_notify_enslave()
when other components also consider the slave as enslaved.
Later this will be fixed so that the SLAVES property correspond
to what other master/slave related properties say.
release_slave() should do the right thing and handle errors as
good as it can. There is no value in propagating the error and
it's not clear what the caller should do in face of a failure
during release.
