Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
Naming is important, because the name of a thing should give you a good
idea what it does. Also, to find a thing, it needs a good name in the
first place. But naming is also hard.
Historically, some strv helper API was named as nm_utils_strv_*(),
and some API had a leading underscore (as it is internal API).
This was all inconsistent. Do some renaming and try to unify things.
We get rid of the leading underscore if this is just a regular
(internal) helper. But not for example from _nm_strv_find_first(),
because that is the implementation of nm_strv_find_first().
- _nm_utils_strv_cleanup() -> nm_strv_cleanup()
- _nm_utils_strv_cleanup_const() -> nm_strv_cleanup_const()
- _nm_utils_strv_cmp_n() -> _nm_strv_cmp_n()
- _nm_utils_strv_dup() -> _nm_strv_dup()
- _nm_utils_strv_dup_packed() -> _nm_strv_dup_packed()
- _nm_utils_strv_find_first() -> _nm_strv_find_first()
- _nm_utils_strv_sort() -> _nm_strv_sort()
- _nm_utils_strv_to_ptrarray() -> nm_strv_to_ptrarray()
- _nm_utils_strv_to_slist() -> nm_strv_to_gslist()
- nm_utils_strv_cmp_n() -> nm_strv_cmp_n()
- nm_utils_strv_dup() -> nm_strv_dup()
- nm_utils_strv_dup_packed() -> nm_strv_dup_packed()
- nm_utils_strv_dup_shallow_maybe_a() -> nm_strv_dup_shallow_maybe_a()
- nm_utils_strv_equal() -> nm_strv_equal()
- nm_utils_strv_find_binary_search() -> nm_strv_find_binary_search()
- nm_utils_strv_find_first() -> nm_strv_find_first()
- nm_utils_strv_make_deep_copied() -> nm_strv_make_deep_copied()
- nm_utils_strv_make_deep_copied_n() -> nm_strv_make_deep_copied_n()
- nm_utils_strv_make_deep_copied_nonnull() -> nm_strv_make_deep_copied_nonnull()
- nm_utils_strv_sort() -> nm_strv_sort()
Note that no names are swapped and none of the new names existed
previously. That means, all the new names are really new, which
simplifies to find errors due to this larger refactoring. E.g. if
you backport a patch from after this change to an old branch, you'll
get a compiler error and notice that something is missing.
Configuration can have [device*] and [connection*] settings and both
can include a 'match-device=' key, which is a list of device-specs.
Introduce a new 'allowed-connections' key for [device*] sections,
which specifies a list of connection-specs to indicate which
connections can be activated on the device.
With this, it becomes possible to have a device configuration like:
[device-enp1s0]
match-device=interface-name:enp1s0
allowed-connections=except:origin:nm-initrd-generator
so that NM in the real root ignores connections created by the
nm-initrd-generator, and starts activating a persistent
connection. This requires also setting 'keep-configuration=no' to not
generate an assumed connection.
Add a new 'keep-configuration' device option, set to 'yes' by
default. When set to 'no', on startup NetworkManager ignores that the
interface is pre-configured and doesn't try to keep its
configuration. Instead, it activates one of the persistent
connections.
Otherwise we see a warning:
<warn> [1622790097.3601] config: unknown key firewall-backend in section [main] of file /etc/NetworkManager/NetworkManager.conf
Fixes: 1da1ad9c99 ('firewall: make firewall-backend configurable via "NetworkManager.conf"')
Watch for NMSettingConnection changes and creation signals and convert
them to IWD format and write them to the configured IWD profile storage
directory. The logic is off by default and gets enabled when the new
iwd-config-path setting in nm.conf's [main] group is set to a path to
an existing directory.
The idea here is that when a user edits an NM connection profile, the
change is immediately mirrored in IWD since IWD watches its
configuration directory using inotify. This way NM clients can be used
to edit 802.1x settings, the PSK passphrase or the SSID -- changes that
would previously not take effect with the IWD backend.
Some precautions are taken to not make connections owned by a user
available to other users, such connections are not converted at all.
In all other cases where a connection cannot be converted sufficiently
well to the IWD format, for various reasons, we also give up and not
mirror these connections.
Due to IWD limitations and design differences with NM this logic has
many problems where it may not do its task properly. It's meant to work
on a best-effort and "better than nothing" basis, but it should be safe
in that it shouldn't delete users data or reveal secrets, etc. The most
obvious limitation is that there can be multiple NM connections
referring to the same SSID+Security tuple and only one IWD profile can
exist because the filename is based on only the SSID+Security type. We
already had one NM connection selected for each IWD KnownNetwork and
referenced by a pointer, so we ignore changes in NM connections other
than that selected one.
nm_utils_ptrarray_find_binary_search() had two additional output
arguments: the first and last index -- in case the sorted list contains
duplicates.
That's nice, and was used in the past. But now, those output arguments
are no longer used.
So drop them from nm_utils_ptrarray_find_binary_search().
Actually, we could now also drop the previous variant
nm_utils_ptrarray_find_binary_search_range(), as it's only used by unit
tests. However, although not rocket science, getting this right is not
entirely trivial, so lets keep the code in case we need it again.
"libnm-core/" is rather complicated. It provides a static library that
is linked into libnm.so and NetworkManager. It also contains public
headers (like "nm-setting.h") which are part of public libnm API.
Then we have helper libraries ("libnm-core/nm-libnm-core-*/") which
only rely on public API of libnm-core, but are themself static
libraries that can be used by anybody who uses libnm-core. And
"libnm-core/nm-libnm-core-intern" is used by libnm-core itself.
Move "libnm-core/" to "src/". But also split it in different
directories so that they have a clearer purpose.
The goal is to have a flat directory hierarchy. The "src/libnm-core*/"
directories correspond to the different modules (static libraries and set
of headers that we have). We have different kinds of such modules because
of how we combine various code together. The directory layout now reflects
this.
Before there was a licensing conflict between the keyfile code
(libnm-keyfile) and libnm. The latter would require LGPL-2.1+ while
keyfile code was GPL-2.0+.
Consequently we were linking libnm-keyfile into the daemon, but not in
libnm.so.
This conflict has been resolved and keyfile API is part of libnm.so.
There is no more need to build a separate (intermediary) library. Merge
them.
This also makes sense because keyfile code needs access to private code
from libnm-core. It is closely tied to libnm-core, so that building them
separate makes no sense (anymore).
Currently "src/" mostly contains the source code of the daemon.
I say mostly, because that is not true, there are also the device,
settings, wwan, ppp plugins, the initrd generator, the pppd and dhcp
helper, and probably more.
Also we have source code under libnm-core/, libnm/, clients/, and
shared/ directories. That is all confusing.
We should have one "src" directory, that contains subdirectories. Those
subdirectories should contain individual parts (libraries or
applications), that possibly have dependencies on other subdirectories.
There should be a flat hierarchy of directories under src/, which
contains individual modules.
As the name "src/" is already taken, that prevents any sensible
restructuring of the code.
As a first step, move "src/" to "src/core/". This gives space to
reorganize the code better by moving individual components into "src/".
For inspiration, look at systemd's "src/" directory.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/743
