* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_call_nm_method): remove some commented code
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_remove_ap_by_essid): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): remove access points from the ignore list
when the user forces them
* src/nm-dbus-device.c
- (nm_dbus_device_get_active_network): fix up escaping of object paths
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@557 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Third (unfinished, partially working) cut at porting to
dbus 0.30 api and new hal.
* info-daemon/NetworkManagerInfoDbus.c:
don't free null arrays.
* panel-applet/NMWirelessAppletDbus.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/NetworkManagerDbus.c: more
STRING -> OBJECT_PATH fun
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
(rename nm_device_get_link_active): rename to
nm_device_has_active_link
(nm_device_wireless_link_active): rename to
nm_device_probe_wireless_link_state
(nm_device_wired_link_active): rename to
nm_device_probe_wired_link_state. Rewrite to
use carrier file since hal doesn't maintain
link state anymore.
(nm_device_update_link_active): rename to
nm_device_update_link_state
* src/NetworkManagerPolicy.c
(nm_policy_activation_finish): check for NULL
MAC address.
* src/Makefile.am:
* src/NetworkManagerMain.h:
* src/NetworkManager.c:
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h: New class to support
monitoring wired ethernet link status, since HAL
doesn't export that information anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@495 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
