These variants provide additional nm_assert() checks, and are thus
preferable.
Note that we cannot just blindly replace &g_array_index() with
&nm_g_array_index(), because the latter would not allow getting a
pointer at index [arr->len]. That might be a valid (though uncommon)
usecase. The correct replacement of &g_array_index() is thus
nm_g_array_index_p().
I checked the code manually and replaced uses of nm_g_array_index_p()
with &nm_g_array_index(), if that was a safe thing to do. The latter
seems preferable, because it is familar to &g_array_index().
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
ASSUME is causing more troubles than benefits it provides. This patch is
dropping NM_L3_CFG_COMMIT_TYPE_ASSUME and assume_config_once. NM3LCfg
will commit as if the sys-iface-state is MANAGED.
This patch is part of the effort to remove ASSUME from NetworkManager.
After ASSUME is dropped when starting NetworkManager it will take full
control of the interface, re-configuring it. The interface will be
managed from the start instead of assumed and then managed.
This will solve the situations where an interface is half-up and then a
restart happens. When NetworkManager is back it won't add the missing
addresses (which is what assume does) so the interface will fail during
the activation and will require a full activation.
https://bugzilla.redhat.com/show_bug.cgi?id=2050216https://bugzilla.redhat.com/show_bug.cgi?id=2077605https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1196
(cherry picked from commit bf5927b978)
Specifically, in nm_utils_ip_route_attribute_to_platform() and in
_l3_config_data_add_obj() handle such new route type. For the moment,
they cannot be stored in a valid NMSettingIPConfig, but later this will
be necessary.
(cherry picked from commit 6255e0dcac)
We made the choice, that NMPlatformIPRoute does not contain the actual
route table, instead it contains a "remapped" number: table_coerced.
That remapping done, so that the default (which we want semantically to
be 254, RT_TABLE_MAIN) is numerical zero so that struct initialization
doesn't you require to explicitly set the default.
Hence, we must always distinguish whether we have the real table number
or the "table_coerced", and you must convert back and forth between the
two.
Now, the parameter of nm_l3_config_data_merge() are real table numbers
(as also indicated by their name not having the term "coerced"). So
usually they are set to actually 254.
When we set the field of NMPlatformIPRoute, we must coerce it. This was
wrong, and we would see wrong table numbers in the log:
l3cfg[17b98e59a477b0f4,ifindex=2]: obj-state: track: [2a32eca99405767e, ip4-route, type unicast table 0 0.0.0.0/0 via ...
Fixes: b4aa35e72d ('l3cfg: extend nm_l3cfg_add_config() to accept default route table and metric')
(cherry picked from commit e23ebe9183)
The force-commit flag is used to force the commit of an address or a
route from DHCP/RA even when it was removed from platform externally
(for example because it expired). Routes generated from the l3cd
should also have the flag set.
Without this, NM properly re-adds the DHCP address after the lease is
lost and obtained again, but fails to add the prefix-route.
Fixes: 2838b1c5e8 ('core: track force-commit flag for l3cd and platform objects')
https://bugzilla.redhat.com/show_bug.cgi?id=2033991https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1049
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
Problem: if l3cfg commits an address and routes from DHCP, when the
address expires those objects are removed automatically. NM tracks the
objects as missing as if the user removed them. This is to prevent
l3cfg to committing them again. If the lease if renewed, l3cfg should
be allowed to commit those objects again.
Introduce a l3cd flag to indicate that it should be force-committed
once, and propagate this flag to platform objects. In this way, l3cfg
can avoid committing again objects that are removed externally, but it
can commit them when the l3cd changes.
Fixes-test: @bridge_down_to_l2_only
When the route is not a default route 0.0.0.0/0, NetworkManager should
not add dependent routes.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
- add "pre-commit" signal.
- fix assertion in nm_l3_config_data_get_ip6_privacy().
- set IPv6 privacy in _init_from_connection_ip() from profile.
- fix leaking "os_zombie_lst" in _obj_state_data_free().
- remove wrong assertion about VRF.
- fix _routes_temporary_not_available_update() to honor only the
requested object type. Otherwise, we always prune unrelated objects
too.
We often want to be pedantic about not accepting %NULL for getters (or ref,
unref, etc). Often that is also inconvenient, so we would need to write:
if (l3cd)
strv = nm_l3_config_data_get_nameservers(l3cd, addr_family, &len);
else
len = 0;
(and, make sure that strv does not trigger a maybe-uninitialized warning).
Being pedanic here is more cumbersome than helpful. Accept NULL to return
the sensible default.
Also add nm_l3_config_data_get_dns_priority_or_default() helper which maps
NULL or a missing value to zero. This is also only for convenience for certain
callers.
There is always a question between convenience of allowing %NULL (and
do nothing) and strictly require the user to check the argument to not
be %NULL. In this case, it's more convenient to accept NULL, than require
the callers to check for it.
NML3ConfigData is supposed to be immutable. It can be initialized from a
NMConnection, and its DNS priority property might be zero.
For the DNS priority, the value can be overwritten by global defaults.
We thus need to inject the default value at the right place.
It's a bit tricky how this flag works. It's needed for IPv6
link local addresses, which commits changes in %NM_L3_CFG_COMMIT_TYPE_ASSUME
mode. See the code comments how it works.
This commit only adds the flags and let's the NMPlatformIP{Address,Route}
properly track it. What is still needed is to actually implement any
meaning to that during the sync.
This flag is only relevant for IPv4. That is, because the way we do
ACD/DAD is fundamentally different between IPv4 and IPv6. For IPv4, we
use libn-acd while IPv6 we configure the address in kernel and wait for
the tentative flag to go away.
Each NML3ConfigData should have a source set, and in fact most callers
would call nm_l3_config_data_set_source() right after creating the
instance.
Move the source parameter to the new() constructor function. Also remove
the setter, making the source of an instance immutable.
As every l3cfg instance generally has a clear purpose, the source should
always be known from the start and doesn't need to change.
The "utils" part does not seem useful in the name.
Note that we also have NMStrBuf, which is named nm_str_buf_*().
There is an unfortunate similarity between the two, but it's still
distinct enough (in particular, because one takes an NMStrBuf and
the other not).
Naming is important, because the name of a thing should give you a good
idea what it does. Also, to find a thing, it needs a good name in the
first place. But naming is also hard.
Historically, some strv helper API was named as nm_utils_strv_*(),
and some API had a leading underscore (as it is internal API).
This was all inconsistent. Do some renaming and try to unify things.
We get rid of the leading underscore if this is just a regular
(internal) helper. But not for example from _nm_strv_find_first(),
because that is the implementation of nm_strv_find_first().
- _nm_utils_strv_cleanup() -> nm_strv_cleanup()
- _nm_utils_strv_cleanup_const() -> nm_strv_cleanup_const()
- _nm_utils_strv_cmp_n() -> _nm_strv_cmp_n()
- _nm_utils_strv_dup() -> _nm_strv_dup()
- _nm_utils_strv_dup_packed() -> _nm_strv_dup_packed()
- _nm_utils_strv_find_first() -> _nm_strv_find_first()
- _nm_utils_strv_sort() -> _nm_strv_sort()
- _nm_utils_strv_to_ptrarray() -> nm_strv_to_ptrarray()
- _nm_utils_strv_to_slist() -> nm_strv_to_gslist()
- nm_utils_strv_cmp_n() -> nm_strv_cmp_n()
- nm_utils_strv_dup() -> nm_strv_dup()
- nm_utils_strv_dup_packed() -> nm_strv_dup_packed()
- nm_utils_strv_dup_shallow_maybe_a() -> nm_strv_dup_shallow_maybe_a()
- nm_utils_strv_equal() -> nm_strv_equal()
- nm_utils_strv_find_binary_search() -> nm_strv_find_binary_search()
- nm_utils_strv_find_first() -> nm_strv_find_first()
- nm_utils_strv_make_deep_copied() -> nm_strv_make_deep_copied()
- nm_utils_strv_make_deep_copied_n() -> nm_strv_make_deep_copied_n()
- nm_utils_strv_make_deep_copied_nonnull() -> nm_strv_make_deep_copied_nonnull()
- nm_utils_strv_sort() -> nm_strv_sort()
Note that no names are swapped and none of the new names existed
previously. That means, all the new names are really new, which
simplifies to find errors due to this larger refactoring. E.g. if
you backport a patch from after this change to an old branch, you'll
get a compiler error and notice that something is missing.
The entire point of NML3ConfigData is to be immutable and merging them.
"Merging" means to combine existing settings, hence NMRefString can be
used to share the same string instance.
We use the merge function to initialize the cloned instance.
Previously, merge did not always copy all properties, so the
cloned instance might not have been identical. Fix that.
gboolean is a typedef for int, so there is no difference in behavior.
However, we use IS_IPv4 as index into arrays of length two. Making
it "int" seems more approriate. Also, this is what all the other
(similar) code does.
