Fix refcounting issues over sleep/wake when a VPN connection was active that
caused NM to try registering an object path for a device upon wake that was
the same as an already registered object path.
* src/nm-device.c
- (nm_device_take_down): properly handle cases where the device is
no longer active but was just active, and therefore must be
deactivated. When a device moves to unmanaged mode, this function
previously would not deactivate the device, because the state was
already unmanaged by the time this function was called.
* src/vpn-manager/nm-vpn-connection.c
- (device_state_changed): properly handle multiple devices states in
which the device is now deactivated. Code previously didn't handle
transitions to the UNAVAILABLE (like rfkill or carrier off) and
UNMANAGED states.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3667 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): clean up; update for changes to
NMIP4Config to support multiple IP addresses
* src/NetworkManagerUtils.c
- (nm_utils_merge_ip4_config): update for multiple IP addresses
* src/nm-ip4-config.c
src/nm-ip4-config.h
- Store a list of IPv4 address/netmask/gateway tuples
- (nm_ip4_config_get_gateway, nm_ip4_config_set_gateway,
nm_ip4_config_get_netmask, nm_ip4_config_set_netmask,
nm_ip4_config_get_broadcast, nm_ip4_config_set_broadcast,
nm_ip4_config_set_address): remove
- (nm_ip4_config_take_address, nm_ip4_config_add_address,
nm_ip4_config_replace_address, nm_ip4_config_get_num_addresses):
new functions; handle multiple IPv4 addresses
* src/nm-device.c
src/ppp-manager/nm-ppp-manager.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
test/nm-tool.c
libnm-glib/libnm-glib-test.c
- update for changes to NMIP4Config for multiple IPv4 addresses
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if any address
is on the same subnet as the destination
- (check_one_address): ignore the exact match, just match family and
interface index
- (add_ip4_addresses): add all IPv4 addresses in an NMIP4Config to
an interface
- (nm_system_device_set_from_ip4_config): use add_ip4_addresses()
- (nm_system_vpn_device_set_from_ip4_config): use add_ip4_addresses()
* introspection/nm-ip4-config.xml
- Remove 'address', 'gateway', 'netmask', and 'broadcast' properties
- Add 'addresses' property which is an array of (uuu) tuples of
address/netmask/gateway
* libnm-util/nm-setting-ip4-config.c
- (set_property): use ip-address <-> GValue converters from nm-utils.c
* libnm-glib/nm-ip4-config.c
libnm-glib/nm-ip4-config.h
- Handle D-Bus interface changes to support multiple IP addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* callouts/Makefile.am
callouts/nm-dispatcher-action.c
callouts/nm-dispatcher-action.h
callouts/nm-dispatcher.conf
callouts/nm-dispatcher.xml
callouts/org.freedesktop.nm_dispatcher.service
- Re-implement the dispatcher as a system-bus activated service that
NM calls on-demand, rather than an always running daemon
* src/Makefile.am
- Add callouts dir to includes to pick up dispatcher defines
* src/nm-device.c
- (nm_device_state_changed): call dispatcher on device activated/
deactivated
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_set_vpn_state): call dispatcher when VPN connections
go up and down
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_call_dispatcher): helper to call dispatcher
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3607 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerUtils.c
src/NetworkManagerUtils.h
- (nm_utils_merge_ip4_config): new function; merge settings from an
NMSettingIP4Config to an NMIP4Config object
* src/nm-device.c
- (merge_ip4_config): move to NetworkManagerUtils.c
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): merge in user-specified settings
too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3580 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_daemon_exec): add an error argument so that spawn
errors can be passed back to the caller; also no longer scheduled
as an idle handler, but called directly; and bump up VPN service
spawn timeout, 2s is really short
- (nm_vpn_service_activate): don't schedule the VPN service activation,
but call it directly so that errors are reported on return from
ActivateConnection() and don't get lost. If scheduled as an idle
handler, clients don't have the time to query NM for the new VPN
connection's properties before the VPN connection is torn down again
if the service couldn't be launched, and therefore launch errors
get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3521 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (device_state_changed): send correct state on device failure too
- (plugin_state_changed): failed state means unexpected disconnection,
thus if the service goes away while the VPN connection is activated
that's a failure too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3520 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_class_init): PROP_SPECIFIC_OBJECT should be boxed,
not string
* src/nm-activation-request.c
- (nm_act_request_class_init): PROP_SPECIFIC_OBJECT should be boxed,
not string
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3513 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework VPN connection handling for a more consistent D-Bus API. The
VPNManager object has been removed, and active VPN connections are now the
same as any other active connection. The Manager object's ActivateConnection
and DeactivateConnection methods are used to start and stop a VPN connection,
and the VPNConnection objects are subclasses of the ActiveConnection objects.
When activating a VPN connection, pass the path of the active connection
to which the VPN connection is tied in the 'specific_object' argument.
Consequently, the libnm-glib API has been reworked to match this arrangement,
with the VPNManager object removed, and the NMVPNConnection objects now
being subclasses of NMActiveConnection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3504 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
First pass of multiple active device support. Expect bugs.
* src/nm-ip4-config.c
src/nm-ip4-config.h
- (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove;
there are better ways to do this in the named manager
* src/nm-device.c
src/nm-device.h
- (nm_device_can_activate): return whether the device can activate a
connection right now; taking into account things like carrier state
and rfkill state
- (nm_device_get_best_auto_connection): renamed from
nm_device_get_best_connection
- (real_act_stage4_get_ip4_config): MTU stuff is now handled in the
device subclasses themselves, so that each device can override the
MTU from it's NMSetting subclass if needed
- (nm_device_set_ip4_config): set MTU when setting up routes and stuff
in NetworkManagerSystem.c, not here
* src/named-manager/nm-named-manager.c
src/named-manager/nm-named-manager.h
- (nm_named_manager_name_owner_changed,
nm_named_manager_dbus_connection_changed): fix for changes to
rewrite_resolv_conf()
- (compute_nameservers): don't need the NMNamedManager at all, remove
from parameter list
- (merge_one_ip4_config): new function; merge ip4 configs together
- (rewrite_resolv_conf): write out resolv.conf from all the stored
ip4 configs; the VPN config takes precedence, then the best
device config, then the rest of the configs
- (get_domain_for_config): take the NMNamedManager as an argument
to check whether the config is the VPN config
- (add_ip4_config_to_named): fixups for removal of the 'secondary'
attribute from ip4 configs
- (add_all_ip4_configs_to_named): add all the configs in priority order
- (remove_ip4_config_from_named): fix for changes to
get_domain_for_config()
- (nm_named_manager_add_ip4_config): assign the config to the right slot
based on its type; callers must pass in the type now
- (get_last_default_domain): remove, unused
- (nm_named_manager_remove_ip4_config): handle config slots correctly
* src/nm-device-802-11-wireless.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): handle MTU override
* src/nm-device-802-3-ethernet.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): new function; handle MTU override
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary'
attribute on the ip4 config
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): remove
- (nm_policy_device_change_check): remove
- (update_default_route): new function; set the default route via
the specified device
- (get_device_priority): new function; return the priority number of
a device type WRT which one should have the default route. Order is
(highest to lowest) wired, wireless, GSM, CDMA.
- (update_routing_and_dns): new function; determine which device should
have the default route, then update the routing table and DNS
- (maybe_auto_activate_device): new function; if a device is now
available for activation, find out what connection it would like to
activate and do it
- (schedule_activate_check): new function; if a device can be activated
now, schedule the activation. Each device may have only one
pending activation at a given time.
- (device_state_changed): if activation was canceled, try again,
possibly with another connection; if the device was activated,
update routing and DNS; if the device was deactivated, try again
with another connection
- (device_carrier_changed): if there is no carrier, deactivate the
device; otherwise schedule an activation check for the device
- (wireless_networks_changed): schedule an activation check for the
device
- (device_added): keep track of the signal handler IDs so they can
be removed when the device goes away
- (device_removed): remove any signal handlers that might be attached
to the device; update routing and DNS
- (schedule_activate_all): new function
- (connections_added, connection_added, connection_updated): when
connections change, schedule all devices for an activation check
- (connection_removed): when a device is deactivated because its
connection was removed, schedule another activation check for it
- (nm_policy_destroy): destroy pending activations and disconnect
all device signal handlers
* src/nm-manager.c
- (nm_manager_activate_device): if the device was already actived,
deactivate it
- (deactivate_old_device): remove
- (connection_added_default_handler, impl_manager_activate_device):
don't deactivate other devices when activating this one
* src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerDebian.c
- (nm_system_get_mtu): remove; MTU should be provided through the
distro's system settings service plugin instead
- (nm_system_device_add_default_route_via_device): remove
- (nm_system_device_add_default_route_via_device_with_iface): remove
- (nm_system_device_replace_default_route): new function; call
generic implementation
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_device_add_default_route_via_device,
nm_generic_device_add_default_route_via_device_with_iface): remove
- (nm_generic_device_replace_default_route): replace the default route
with the given route via some gateway
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_from_ip4_config): let the policy handle updates
to routing and DNS; but set the MTU here
- (nm_system_vpn_device_set_from_ip4_config): set the route with the
ip_iface of the active device; use the standard MTU setting function
- (nm_system_set_mtu): remove
- (nm_system_device_set_mtu): consolidate MTU setting code in one place
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Global rename of NMConnectionSettings -> NMExportedConnection to cut down
on confusing names
* Add 'path' and 'scope' properties to NMConnection since both NM and the
applet were having to hack this in anyway. Remove the 'path' stuff from
NMExportedConnection
* Internally rename NMConnectionType -> NMConnectionScope
* Provide default implementations of the 'get_id' and 'get_settings' methods
of NMExportedConnection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3334 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Change the
arguments: This whole file shouldn't really know anything about
NMDevices, it
should deal only with device interfaces. Devices might have
different ifaces for
different stuff and this place shouldn't know anything about it.
* src/NetworkManagerPolicy.c: Get rid of leftover global
* variable global_policy.
(global_state_changed): Implement. In the current NM it's not
really important,
but will be required in the case of multiple active devices. (Or
even better,
if stuff like that gets moved out from NM).
* src/vpn-manager/nm-vpn-connection.c
* (connection_state_changed): Don't call
nm_system_device_set_from_ip4_config() directly, use
nm_device_set_ip4_config()
instead.
* src/nm-device.c: Add a ip_face protected member. It's used for
* 'multi-interface'
devices like serial devices (ttyS0 and ppp0 for example).
(nm_device_get_ip_iface): Implement. Default to the device iface
if ip_iface is not
set.
(nm_device_set_ip_iface): Implement.
(nm_device_activate_stage5_ip_config_commit): Move all the extra
actions that happen
after setting ip4_config from here ...
(nm_device_set_ip4_config): ... to here. The reason behind it is
that no other code
than this function should call
nm_system_device_set_from_ip4_config() because no
other code has enough information on which arguments to use. So
instead, other code
could just set the new ip4 config using this function and
everyone is happy.
* src/nm-umts-device.c: Store the pending ids so that we can
* remove pending actions
if we happen to get deactivated while something is pending.
(automatic_registration): Handle the response that indicates
pending network
registration and wait until the pending registration is done.
(real_deactivate_quickly): If there's a pending operation,
cancel it.
* src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when
* the iface is up ...
(real_deactivate_quickly): ... and remove it when it's down.
(nm_serial_device_get_reply): Return the timeout id so that the
callers can remove
it if needed.
(nm_serial_device_wait_for_reply): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-connection.h
libnm-util/nm-setting-connection.c
- Rename the 'name' property to 'id', because it conflicted with the
NMSetting superclass' 'name' property.
* libnm-util/nm-setting.c
- (nm_setting_to_hash): serialize the 'name' property
- (one_property_cb): ignore 'name' on deserialization of a connection
* src/nm-device-802-11-wireless.c
src/vpn-manager/nm-vpn-connection.c
src/NetworkManagerPolicy.c
- Fix up for NMSettingConnection 'name'->'id' changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3084 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Rework NMSetting structures: Move each setting to it's own file.
Convert to GObject. Remove home grown setting types and use
GTypes.
Use GObject property introspection for hash conversion,
enumerating
properties, etc.
* libnm-util/nm-setting-connection.[ch]
* libnm-util/nm-setting-ip4-config.[ch]
* libnm-util/nm-setting-ppp.[ch]
* libnm-util/nm-setting-vpn.[ch]
* libnm-util/nm-setting-vpn-properties.[ch]
* libnm-util/nm-setting-wired.[ch]
* libnm-util/nm-setting-wireless.[ch]
* libnm-util/nm-setting-wireless-security.[ch]
New files, each containing a setting.
* libnm-util/nm-setting-template.[ch]: A template for creating
* new
settings. To use it, just replace 'template' with the new
setting
name, and you're half-way done.
* libnm-util/nm-setting.c: Convert to GObject and use GObject
introspection instead of internal types and tables.
* libnm-util/nm-connection.c: Adapt the new NMSetting work.
* libnm-util/nm-param-spec-specialized.[ch]: Implement. Handles
GValue types defined by dbus-glib for composed types like
collections,
structures and maps.
* src/*: The API of NMSetting and NMConnection changed a bit:
* Getting
a setting from connection takes the setting type now. Also,
since
the settings are in multiple files, include relevant settings.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3068 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the GetSecrets() call off to a separate D-Bus interface so that it
can be more easily locked down with D-Bus policy. Only 'root' (ie, NM)
should be able to call GetSecrets().
* include/NetworkManager.h
- Define the connection secrets D-Bus interface
* src/vpn-manager/nm-vpn-connection.c
- (clear_need_auth): get the right proxy object for the connection
secrets interface
- (get_connection_secrets): use the connection secrets proxy; send
empty hints in get secrets request
* src/nm-activation-request.c
- (nm_act_request_request_connection_secrets): use the connection
secrets proxy; send empty hints in get secrets request
* src/nm-manager.c
src/nm-manager.h
- (connection_get_settings_cb): set the connection secrets proxy on
the connection object too
- (internal_new_connection_cb): create the connection secrets proxy
* introspection/nm-settings-connection.xml
- Define Connection.Secrets interface and move GetSecrets there
- Add a 'hints' argument to GetSecrets
* libnm-glib/nm-settings.c
libnm-glib/nm-settings.h
- (impl_connection_settings_get_secrets): add 'hints' argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2989 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManagerVPN.h
- define VPN connection state change reason codes
* src/vpn-manager/Makefile.am
src/vpn-manager/nm-vpn-marshal.list
src/vpn-manager/nm-vpn-marshal-main.c
- Add marshallers for StateChanged signal
* introspection/nm-vpn-connection.xml
- New Banner property
- StateChanged signal now includes a 'reason' argument
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
- Add a "Banner" property that contains the returned VPN server login
banner (if any); valid only in the ACTIVATED state
- (nm_vpn_connection_set_state, nm_vpn_connection_disconnect): now takes
a 'reason' argument and emits that reason along with the
state-changed signal
- Fix up calls to nm_vpn_connection_set_state() to include a reason
- (nm_vpn_connection_ip4_config_get): save banner for later
- (nm_vpn_connection_get_banner, get_property,
nm_vpn_connection_class_init): implement Banner property
* src/vpn-manager/nm-vpn-service.c
- (nm_vpn_service_connections_stop): take a reason argument; copy the
connection list because elements may get added/removed from it
while iterating over the list
- (connection_state_changed): signal now includes the 'reason' argument
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- (nm_vpn_connection_get_banner): new function
- (state_changed_proxy): handle reason argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2916 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c:
* src/nm-manager.h:
Implement device activation through NMManager.
Implement "pending device activation" here - If the connection
isn't found,
we try to wait for up to 5 seconds for the connection to be
provided.
Add NMConnectionType argument to "connection-added" and
"connection-removed"
signals.
(nm_manager_get): Remove. Finally.
* src/nm-activation-request.c:
* src/nm-activation-request.h:
Remove all the deferred activation code.
* src/nm-device.c: Remove all the deferred activation code. Once
* the device
activation is started, it's started. Update the activation
virtual function
signature.
* src/nm-device-interface.c:
* src/nm-device-interface.h:
Device activation now takes only NMActRequest argument.
Don't expose device activation directly on dbus, it's supposed
to go through
NMManager now.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check):
* Make the code
a bit more compact.
Use the new device activation methods through NMManager.
* introspection/nm-manager-client.xml:
* introspection/nm-manager.xml:
* libnm-glib/nm-client.c:
* libnm-glib/nm-client.h:
Add device activation method.
* libnm-glib/nm-device.c:
* libnm-glib/nm-device.h:
* introspection/nm-device.xml:
Remove device activation method. It's done through NMManager
now.
* src/vpn-manager/nm-vpn-manager.c (impl_vpn_manager_connect):
* Use the shiny
new (nm_manager_get_device_by_path) function, get rid of our own
)find_device).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2915 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_set_state, clear_need_auth, finalize,
connection_secrets_updated_cb, get_secrets_cb): don't need to attach
to the secrets-updated signal of the NMConnection since updating
the secrets is done within the scope of the NMVPNConnection object
already
- (get_connection_secrets): fix an uninialized variable usage error
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2898 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManagerVPN.h
- Add a NEED_AUTH state
* src/vpn-manager/nm-vpn-connection.c
- Implement the NEED_AUTH state. First ask the VPN service plugin if
the connection needs secrets, and if so, then ask the settings
service to fill in the secrets. Then start the connection.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2895 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-vpn-plugin.c (nm_vpn_plugin_connect): Update the
* plugin activation
method.
(impl_vpn_plugin_connect): Convert properties hash to
NMConnection, activate, and
unreference the connection.
* introspection/nm-vpn-plugin.xml: Modify the 'Connect' method
* arguments: instead of
passing properties hash and routes string list, pass
NMConnection (in hashed form).
* src/vpn-manager/nm-vpn-connection.c
* (nm_vpn_connection_get_routes): Return routes
as GSList, no need to copy stuff around anymore.
(nm_vpn_connection_activate): Update the plugin activation
method.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Convert
routes argument to GSList.
* vpn-daemons/vpnc/src/nm-vpnc-service.c (real_connect):
The arguments have changed, update.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2890 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c (manager_device_state_changed): Listen to
* device' NEED_AUTH
state and try to get the secrets.
* src/NetworkManagerPolicy.c (nm_policy_auto_get_best_device):
* Get the list of
connections from NMManager and let the device to choose the best
from the list.
Since the connection list is sorted by system ones first and
user ones later,
the devices still prefer system connections like they did
before.
(deactivate_old_device): Implement. When a device starts
activation, we have a
policy (for now at least) to deactivate any other device that
might be either
active or still activating.
* src/vpn-manager/nm-vpn-manager.c: Add NMManager back to the
* private structure.
It's set on construction, there will be no other way to access
it.
* src/nm-device-802-11-wireless.c: Don't touch NMManager,
* NMManager can listen to
device events and drive the device, not the other way around.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/nm-device.c (nm_device_get_best_connection): The
* connections list is now
sent along, pass it on to virtual functions.
* src/nm-device-interface.c (nm_device_interface_get_iface):
* Implement. It's static
for now, but should really be public instead of
nm_device_get_iface() since iface
is a property of the DeviceInterface, not Device.
(impl_device_activate): Don't touch NMManager!
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2889 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting.h: Change the type of
* NMSettingVPN->routes to
GSList.
* libnm-util/nm-setting.c (setting_vpn_destroy): Free routes
* too.
* src/nm-manager.c (connection_get_settings_cb): No need to use
* weakref,
just use (g_object_set_data_full).
* src/vpn-manager/nm-vpn-connection.c
* (nm_vpn_connection_get_routes): Now
that NMSettingVPN->routes is a GSList, convert it to char **.
(nm_vpn_connection_ip4_config_get): Free routes when done.
(nm_vpn_connection_activate): Ditto.
* src/nm-device-802-11-wireless.c
* (real_connection_secrets_updated)
(real_act_stage2_config): Use defined setting names.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2832 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
libnm-glib/nm-settings.c
- defines for the user settings daemon D-Bus bits
* src/NetworkManager.c
- Remove stuff that referred to the old NetworkManagerInfo service
* src/vpn-manager/nm-dbus-vpn.h
- Move old NMI defines to the only place they are used still
* libnm-util/nm-connection.c
libnm-util/nm-connection.h
src/nm-activation-request.c
- Make NMConnection a GObject subclass so we can do spiffy stuff with it
* src/nm-manager.c
src/nm-manager.h
- Get connections and their settings from the user settings daemon
at the appropriate times
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2763 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
