* src/NetworkManagerAP.c
- (nm_ap_new_fake_from_connection): mark fake APs as fake
* src/nm-device-802-11-wireless.c
- (get_active_ap): do two passes over the scan list if the caller
requests that hidden APs get matched too; during the second pass
when matching hidden APs, ignore the SSID since hidden APs in the
scan list don't have an SSID yet
- (periodic_update): move some checks to
nm_device_802_11_periodic_update() because not all callers need them
- (nm_device_802_11_periodic_update): move some checks here from
perodic_update()
- (merge_scanned_ap): if the current AP is fake, then don't do strict
matching on incoming scan results, because the fake AP's flags
might be slightly different (yet still compatible) with the incoming
scan result's flags and they might actually be the same AP; update
the rate on merged APs too
- (activation_success_handler): update the frequency of the fake AP
on successful connection; match hidden APs too since if the
current AP is fake, there might already be a scan result in the
scan list for the desired AP, just without it's SSID filled in yet
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3235 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix gnome.org #464215. Requires the kernel patch titled
"Introduce WEXT scan capabilities" but will handle the patch not being
present, you'll just continue to have problems with hidden SSIDs when
using mac80211-based drivers.
* src/supplicant-manager/nm-supplicant-config.h
src/supplicant-manager/nm-supplicant-config.c
- (nm_supplicant_config_add_setting_wireless): new parameter to indicate
whether the driver supports SSID scans or not. If it does, and if
the AP is hidden, use ap_scan=1 instead of ap_scan=2
* src/nm-device-802-11-wireless.c
- (constructor): check whether or not the driver supports SSID scans
- (build_supplicant_config): pass driver SSID scan capability when
building the wireless bits of the supplicant config
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3230 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
src/nm-device.h
- (device_activation_precheck, check_connection_complete): remove this
virtual function; incomplete connections should be invalid by
definition, complete-ness should be checked in the setting's
verify function
* src/nm-serial-device.c
src/nm-gsm-device.c
- (real_check_connection_complete): remove
* libnm-util/nm-setting-serial.c
- (verify): new function; ensure there is a PPP setting too
* libnm-util/nm-setting-gsm.c
- (verify): ensure there is a serial setting too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3225 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/named-manager/nm-named-manager.c
- (rewrite_resolv_conf, add_ip4_config_to_named): use primary IP4Config's
nameservers if the secondary config doesn't have any
(gnome.org #346833)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3212 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Mark the properties
with G_PARAM_CONSTRUCT so that they get the default values.
* src/nm-gsm-device.c: Add preliminary support for monitoring
* device. It only monitors
the monitoring device and prints out the output for now. Or more
precicely, doesn't
do absolutely anything right now since the montoring device
argument is never set.
* src/nm-serial-device.c (serial_debug): Implement. It's very
* verbose and thus
requires it's own knob to turn it on.
(config_fd): Add NMSettingSerial to the arguments list.
(nm_serial_device_open): Ditto.
(get_reply_got_data): Ignore the terminators at the beginning of
the output.
(nm_serial_device_get_io_channel): Implement.
* src/nm-manager.c: Add NMDBusManager to the private data of the
* NMManager. Asking
a new reference every time (and forgetting to release it
sometimes) is a pain and
it's not like NMManager could work without dbus.
(nm_manager_add_device): Register the added device on dbus here.
* src/nm-hal-manager.c (modem_device_creator): Pass NULL for now
* for the monitoring
device.
* src/nm-device.c (constructor): Don't export the device here,
* instead export
it when it's added to the NMManager's device list.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3203 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_error_quark, nm_device_interface_error_get_type):
normalize and expand errors
- (nm_device_interface_init): register errors so they can be marshalled
through dbus-glib
- (nm_device_interface_activate): ensure that failure of activation
returns an error
* src/nm-device.c
src/nm-device.h
- (device_activation_precheck): implementations of check_connection()
now take a GError and must fill it in if the check fails. Return
more descriptive error if the requested connection is already
activating
- (nm_device_activate): actually try to return descriptive errors on
failures
* src/nm-device-802-11-wireless.c
src/nm-device-802-3-ethernet.c
src/nm-serial-device.c
src/nm-gsm-device.c
- (real_check_connection): return more descriptive errors on failure
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): print activation errors in the logs
* src/nm-manager.c
- (nm_manager_error_quark, nm_manager_error_get_type,
nm_manager_class_init): new errors
- (nm_manager_activate_device): handle errors
- (nm_manager_error_new): removed
- (wait_for_connection_expired, connection_added_default_handler,
impl_manager_activate_device): better error handling
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3197 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-settings-verify.c
- Allow 'frequency' network property
* src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
- (nm_supplicant_config_add_setting_wireless): add 'adhoc_freq' argument
for callers to specify the frequency an Ad-Hoc network should operate
on. Some drivers require this to successfully create an Ad-Hoc
network.
* src/nm-device-802-11-wireless.c
- (iw_freq_to_uint32): new function; convert a struct iw_freq into a
guint32 value in MHz
- (constructor, nm_device_802_11_wireless_get_frequency): use
iw_freq_to_uint32()
- (find_supported_frequency): new function; find a free supported
frequency for a user-created Ad-Hoc network
- (build_supplicant_config): if no frequency was specified for a user-
created Ad-Hoc network, find a free one to use
- (real_act_stage1_prepare): mark Ad-Hoc connections that don't have
a specific object as user-created
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3196 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (nm_device_802_11_wireless_get_frequency): handle drivers that return
a channel # instead of a frequency
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3189 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
- (nm_ap_new_fake_from_connection): pass band to channel_to_freq()
- (freq_to_channel): handle split band tables
- (channel_to_freq): handle split band tables, take a band argument
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3188 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Base the NMNetlinkMonitor class on libnl instead of hand-rolled netlink.
* src/nm-netlink-monitor.c
src/nm-netlink-monitor.h
- Remove handrolled netlink, use libnl instead
* src/nm-device-802-3-ethernet.c
- (constructor, nm_device_802_3_ethernet_carrier_off,
nm_device_802_3_ethernet_carrier_on): use new names
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3181 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Bump requirement for libnl to 1.0-pre8 (which works with newer kernels
and fixes memory leaks)
* src/nm-netlink.c
- (nm_netlink_get_default_handle): handle new versions of libnl that
automatically handle the netlink PID
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3178 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Michael Biebl <biebl@debian.org>
* configure.in
src/ppp-manager/Makefile.am
- fix up install dir of pppd plugin
- clean up configure.in a bit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3176 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
src/NetworkManagerSystem.c
- (new_nl_handle): ensure that the same netlink pid is never chosen
twice (gnome.org #491047)
- Make more robust against allocation-related failures should they occur
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-umts-device.c (real_act_stage1_prepare): Flash the
* modem (drop DTR)
before doing anything else.
(init_modem): Move modem initialization here.
* src/nm-serial-device.c (ppp_state_changed): React on pppd
* state changes.
(nm_serial_device_flash): Implement.
* src/ppp-manager/nm-ppp-manager.c (name_owner_changed): Fix the
* typoes: the state
changes signal is "StateChanged" and not "Status".
(ppp_exit_code, ppp_status_changed): Remove the debug output,
it's working fine now.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3146 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-config.c
- (nm_supplicant_config_add_setting_wireless_security): reorganize a bit
to only send some options when they make sense; also send phase2
option to the supplicant (possible fix for rh #399631)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3143 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Change the
arguments: This whole file shouldn't really know anything about
NMDevices, it
should deal only with device interfaces. Devices might have
different ifaces for
different stuff and this place shouldn't know anything about it.
* src/NetworkManagerPolicy.c: Get rid of leftover global
* variable global_policy.
(global_state_changed): Implement. In the current NM it's not
really important,
but will be required in the case of multiple active devices. (Or
even better,
if stuff like that gets moved out from NM).
* src/vpn-manager/nm-vpn-connection.c
* (connection_state_changed): Don't call
nm_system_device_set_from_ip4_config() directly, use
nm_device_set_ip4_config()
instead.
* src/nm-device.c: Add a ip_face protected member. It's used for
* 'multi-interface'
devices like serial devices (ttyS0 and ppp0 for example).
(nm_device_get_ip_iface): Implement. Default to the device iface
if ip_iface is not
set.
(nm_device_set_ip_iface): Implement.
(nm_device_activate_stage5_ip_config_commit): Move all the extra
actions that happen
after setting ip4_config from here ...
(nm_device_set_ip4_config): ... to here. The reason behind it is
that no other code
than this function should call
nm_system_device_set_from_ip4_config() because no
other code has enough information on which arguments to use. So
instead, other code
could just set the new ip4 config using this function and
everyone is happy.
* src/nm-umts-device.c: Store the pending ids so that we can
* remove pending actions
if we happen to get deactivated while something is pending.
(automatic_registration): Handle the response that indicates
pending network
registration and wait until the pending registration is done.
(real_deactivate_quickly): If there's a pending operation,
cancel it.
* src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when
* the iface is up ...
(real_deactivate_quickly): ... and remove it when it's down.
(nm_serial_device_get_reply): Return the timeout id so that the
callers can remove
it if needed.
(nm_serial_device_wait_for_reply): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-umts-device.c (dial_done): Fix the typoes in warnings.
(get_network_done): Remove newline, nm_info() does it already.
(real_act_stage1_prepare): Turn the modem echo off.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): In case of serial
device, set the route to the device interface. This is a hack.
* src/nm-serial-device.c (nm_serial_device_send_command_string):
* Only append carriage
return, no need for a new-line.
(ppp_ip4_config): Store the ip4 config to be set in the next
stage.
Change the device iface here (ugh).
(real_act_stage4_get_ip4_config): Implement.
(real_deactivate_quickly): Free the pending ip4 config if it's
still pending.
Restore the device iface.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check): Do
* nothing if the active
device is not wired or wireless (eg, automatically upped)
device.
* src/ppp-manager/nm-ppp-manager.c (ip4_config_get): Don't make
* the config secondary,
it isn't.
(nm_ppp_manager_start): Don't let pppd to set the default route,
we want to do it.
* src/nm-hal-manager.c (get_creator): Make sure the device has
* required capability
before calling it's is_device_fn().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3137 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Michael Biebl <biebl@debian.org>
* system-settings/plugins/ifcfg/Makefile.am
system-settings/src/main.c
system-settings/src/Makefile.am
- Put system settings plugins in NM plugins dir
* src/ppp-manager/Makefile.am
src/ppp-manager/nm-ppp-manager.c
- Move pppd plugin to NM plugins dir
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement PIN and PUK requesting.
* src/nm-umts-device.c (enter_pin_done): Request the secret
* again if it failed.
(enter_pin): Handle PIN and PUK requests.
(real_act_stage1_prepare): Clear the secret type.
(real_connection_secrets_updated): Implement this class method
to get
notified when new secrets arrive.
(nm_umts_device_class_init): Add private data back to the umts
device class
to store the required secret type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3128 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Zdeněk Jurka <zdenek.jurka@jware.cz>
Support DHCP-provided static routes.
* src/nm-ip4-config.h
src/nm-ip4-config.c
- Add get/set functions for static routes
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): extract static routes from the
DHCP response
* src/NetworkManagerSystem.c
- (nm_system_device_set_from_ip4_config): set any static routes on the
interface when applying the IP4Config
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3115 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-dbus-manager.h
src/nm-hal-manager.c
- Include the correct headers now that NetworkManagerDbusUtils.h doesn't
do it for them
* src/Makefile.am
src/NetworkManagerDbusUtils.c
src/NetworkManagerDbusUtils.h
- Remove these two source files; they are unused
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3111 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
