When the entire NMSettingWired setting is missing, it should be treated
exactly the same as each property having the default/unset value.
Otherwise, adding a NMSettingWired setting only to set (say) MTU,
would result in different behavior. Although effectively the
"cloned-mac-address" shall be in both cases the same.
Software devices must report the NM_DEVICE_CAP_IS_SOFTWARE capability
in order to be properly activated. Add the flag to NMDeviceTun and
NMDeviceVxlan.
https://bugzilla.gnome.org/show_bug.cgi?id=767846
Don't rely on what's already on the device. It could be that the MAC address
set on the device is not meaningful -- the NM crashed while two devices were
teamed together and now they have the same hardware address and now it's
impossible to bond them with mode=5.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
When we decide to add a new link, we alredy checked that no such link exists
(ignoring race conditions).
It is wrong to accept a EXITS failure when adding the link. There is no guarantee
that the existing link has all the same properties as the one we intend to add.
More importantly, this link was added externally outside of NetworkManager and it
should not be taken over.
Just treat EXISTS as a failure as any other.
The virtual function NMDevice:realize() is only called by
nm_device_realize() and immediately followed by nm_device_setup_start().
Devices already overwrite setup_start_notify() to update their properties.
No need to duplicate that in realize().
All implementations of NMDevice:setup_start() in derived classes
invoke the parent implementation first. Enforce that by moving
NMDevice:setup_start() to realize_start_setup() and only notify
derived classes afterwards via NMDevice:realize_start_notify().
Make it possible to change ethernet.mtu and
ethernet.cloned-mac-address properties of tun/tap devices
(cloned-mac-address is meaningful only for taps).
Link related functions should have a "nm_platform_link" prefix. Rename.
Naming is a subjective matter and one might argue that omitting
the "link" part from the name is shorter and even preferred.
However, I think functions related to links should have a common
prefix as the underlyings are strongly related.
Let the link-add functions return the internal pointer to the platform
link object. Similar to link-get, which doesn't copy the link either.
Also adjust the sole users of the add-functions (create-and-realize)
to take the pointer.
Eventually we still copy the returned data, because accessing platform can
invalidate the returned pointer. Thus we don't actually safe any copying
by this (at least every use of the function currently leads to the data
being copied).
Still change it, because I think the API of NMPlatform should look like that.
NMPlatformLink is a plain struct (not a GObject, for which we usually
don't use const). We certainly don't want the functions to modify the
passed-in data.
Before the device is setup, we call nm_platform_tun_get_properties() without
a valid ifindex. That triggered an assertion [1].
Thereby, change nm_platform_tun_get_properties() to effectively clear
the tun properties when we are unable to fetch them. Also, never modify
the tun-mode of NMDeviceTun.
[1]
#0 0x00007f0a4173e81b in g_logv (breakpoint=1) at gmessages.c:324
#1 0x00007f0a4173e81b in g_logv (log_domain=0x561e9264ccf6 "NetworkManager", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=args@entry=0x7ffd71a0d4d0) at gmessages.c:1081
#2 0x00007f0a4173e98f in g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at gmessages.c:1119
#3 0x0000561e9241ecec in nm_platform_tun_get_properties (self=0x561e9354ba70 [NMLinuxPlatform], ifindex=0, props=0x7ffd71a0d650) at platform/nm-platform.c:2081
#4 0x0000561e923aad9c in reload_tun_properties (self=0x561e937fb080 [NMDeviceTun]) at devices/nm-device-tun.c:68
#5 0x0000561e923aa795 in realize (device=0x561e937fb080 [NMDeviceTun], plink=0x7ffd71a0d818, error=0x7ffd71a0d798) at devices/nm-device-tun.c:225
#6 0x0000561e923bdc06 in nm_device_realize (self=0x561e937fb080 [NMDeviceTun], plink=0x7ffd71a0d818, out_compatible=0x7ffd71a0d77c, error=0x7ffd71a0d798) at devices/nm-device.c:1713
#7 0x0000561e924ad995 in platform_link_added (self=0x561e9356e230 [NMManager], ifindex=33, plink=0x7ffd71a0d818) at nm-manager.c:1947
#8 0x0000561e924ad717 in _platform_link_cb_idle (data=0x561e937eb940) at nm-manager.c:2029
#9 0x00007f0a41737e3a in g_main_context_dispatch (context=0x561e93547530) at gmain.c:3154
#10 0x00007f0a41737e3a in g_main_context_dispatch (context=context@entry=0x561e93547530) at gmain.c:3769
#11 0x00007f0a417381d0 in g_main_context_iterate (context=0x561e93547530, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3840
#12 0x00007f0a417384f2 in g_main_loop_run (loop=0x561e935475f0) at gmain.c:4034
#13 0x0000561e923ba3f3 in main (argc=1, argv=0x7ffd71a0dc68) at main.c:488
Fixes: 4dbaac4ba2
Ensure the platform link with the same interface name as the
NMDevice is actually compatible with it before using the link
for initialization of device properties. If not, remove the
NMDevice and create a new one since there are kernel resources
with a different type.
Unrealized devices aren't backed by kernel resources and so won't know
all of their attributes. That means three things:
1) they must update their attributes when they become realized
2) they must clear those attributes when unrealized
3) they must be looser in checking compatible connections until
they are realized
This requires that the setup() function be split into two parts, start & finish,
because finish must be run after add_device()
Also, we can simplify whether to pay attention to 'recheck-assume', which
is now dependent on priv->is_nm_owned, because the only case where NM should
*not* listen for the 'recheck-assume' signal is when the device is a
software device created by NM itself. That logic was previously spread
across the callers of add_device() but is now consolidated into
nm-manager.c::device_realized() and nm-device.c::nm_device_create_and_realize().
Future patches will create devices long before they are backed by
kernel resources, so we need to split NMDevice object creation from
actual setup based on the backing resources.
This patch combines the NMDeviceFactory's new_link() and
create_virtual_device_for_connection() class methods into a single
create_device() method that simply creates an unrealized NMDevice
object; this method is not expected to fail unless the device is
supposed to be ignored. This also means that the NMDevice
'platform-device' property is removed, because a platform link
object may not be available at NMDevice object creation time.
After the device is created, it is then "realized" at some later
time from a platform link (for existing/hardware devices via the
realize() method) or from an NMConnection (for newly created software
devices via the create_and_realize() NMDeviceClass methods).
https://bugzilla.gnome.org/show_bug.cgi?id=737458
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
Instead of hacky stuff in the Manager, let plugins themselves indicate
which links should be ignored (because they are really child links that
are controlled by a different device that the plugin handles).
Instead of looping over all plugins and asking each plugin whether it
can handle a link or a connection, have them advertise the link and
connection types they support, and use that when creating new devices.
Most nm_platform_*() functions operate on the platform
singleton nm_platform_get(). That made sense because the
NMPlatform instance was mainly to hook fake platform for
testing.
While the implicit argument saved some typing, I think explicit is
better. Especially, because NMPlatform could become a more usable
object then just a hook for testing.
With this change, NMPlatform instances can be used individually, not
only as a singleton instance.
Before this change, the constructor of NMLinuxPlatform could not
call any nm_platform_*() functions because the singleton was not
yet initialized. We could only instantiate an incomplete instance,
register it via nm_platform_setup(), and then complete initialization
via singleton->setup().
With this change, we can create and fully initialize NMPlatform instances
before/without setting them up them as singleton.
Also, currently there is no clear distinction between functions
that operate on the NMPlatform instance, and functions that can
be used stand-alone (e.g. nm_platform_ip4_address_to_string()).
The latter can not be mocked for testing. With this change, the
distinction becomes obvious. That is also useful because it becomes
clearer which functions make use of the platform cache and which not.
Inside nm-linux-platform.c, continue the pattern that the
self instance is named @platform. That makes sense because
its type is NMPlatform, and not NMLinuxPlatform what we
would expect from a paramter named @self.
This is a major diff that causes some pain when rebasing. Try
to rebase to the parent commit of this commit as a first step.
Then rebase on top of this commit using merge-strategy "ours".
Remove all remaining GParamSpec name and blurb strings (and fix
indentation while we're there), and add G_PARAM_STATIC_STRINGS to all
paramspecs that were lacking it.
The 'mode' must be known from the beginning and changing it later on
would not be supported/meaningful. So, enforce this by setting the
property at construct time only.
https://bugzilla.redhat.com/show_bug.cgi?id=1034737
Signed-off-by: Thomas Haller <thaller@redhat.com>
There seems to be the possibility of a race while reading tun
properties from sysctl. In this case, when being unable to
read the properties at construction of NMDeviceTun, we retry
shortly after.
- let tun_get_properties() not log any errors and it
does not stop on the first error but tries to read all
the values. Also, it initializes all fields of the output
structure with a default value (NULL).
- hard code kernel flag #ifndef in header files. Even if the
flag IFF_MULTI_QUEUE is not defined at compile time of NM,
it could still be supported by the kernel (eg. when booting
a newer kernel then the installed kernel headers). Simply
hard code the value, this value is not ever going to change
anyway.
https://bugzilla.redhat.com/show_bug.cgi?id=1034737
Signed-off-by: Thomas Haller <thaller@redhat.com>
Rather than passing UDI, ifname, and driver name to the device
constructors as separate arguments, just pass the NMPlatformLink
instead and let it parse them out.
Virtual types still take UDI and ifname separately, since we create
fake NMDevices for them for autoactivating connections. That's weird
in other ways too though, so perhaps this should be revisted.
