* src/NetworkManagerDevice.c
- (nm_device_wireless_process_scan_results): scan every 20s when
disconnected and scanning is ALWAYS_SCAN or WHEN_UNASSOCIATED
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@722 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerDebian.c
- Add nm_system_device_get_use_dhcp() to debian backend
Patch from Kay Sievers:
* src/backends/NetworkManagerSuSE.c
- Update debian backend for static IP nameservers
* src/NetworkManagerDevice.c
- Actually set the device to use static IP or DHCP rather
than always DHCP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@671 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- Add NMWirelessScanMethod enum for scan methods
* gnome/applet/applet-dbus-devices.c
- (nmwa_dbus_update_scanning_enabled_cb): remove
- (nmwa_dbus_update_scanning_enabled): remove
- (nmwa_dbus_update_devices): don't call nmwa_dbus_update_scanning_enabled() anymore
since it got removed
- (nmwa_dbus_enable_scanning): remove
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_signal_update_scan_method): new function, signal NetworkManager to
update the wireless scanning method from NMI
- (nmi_dbus_get_wireless_scan_method): new function, return wireless scanning
method value to NetworkManager
- (nmi_dbus_info_message_handler): respond to the "getWirelessScanMethod" method call
* gnome/applet/applet-dbus-info.h
- Add prototype for nmi_dbus_signal_update_scan_method
* gnome/applet/applet.c
- (scanning_menu_update): new function, update one GtkCheckMenuItem from the
Wireless Scanning menu based on current wireless scan method
- (nmwa_menu_scanning_item_activate): new function, callback for GTK "activate"
signal for Wireless Scanning menu items, tell NetworkManager the new method
and update our menu items to make sure the right one is checked
- (nmwa_set_scanning_enabled_cb): remove
- (nmwa_context_menu_update): remove references to pause_scanning_item
- (nmwa_context_menu_create): remove pause_scanning_item, and add new Wireless
Scanning menu item
- (nmwa_gconf_get_wireless_scan_method): new method, pull wireless scanning method
from GConf
- nmwa_gconf_networks_notify_callback -> nmwa_gconf_info_notify_callback: generalize
so we get notified of preference values too
- (nmwa_get_instance): monitor GCONF_PATH_WIRELESS rather than GCONF_PATH_WIRELESS_NETWORKS
* gnome/applet/applet.h
- GCONF_PATH_WIRELESS added, one level below GCONF_PATH_WIRELESS_NETWORKS
- Add wireless scan method member to applet data
- Remove pause_scanning_item, add Wireless Scanning submenu
* src/NetworkManager.c
- (nm_data_new): default to NM_SCAN_METHOD_ON
- (main): grab scanning method from NMI if we can
* src/NetworkManagerDbus.c
- (nm_dbus_update_wireless_scan_method_cb): new function, callback from
nm_dbus_update_wireless_scan_method()
- (nm_dbus_update_wireless_scan_method): new function to grab scanning method
from NMI
- (nm_dbus_nmi_is_running): redundant function, removed
- (nm_dbus_signal_filter): trap "WirelessScanMethodUpdate" signal, grab scanning method
when NMI comes back
* src/NetworkManagerDevice.c
- (nm_device_is_activated): return TRUE if the device is activated
- (nm_device_wireless_scan): don't scan if the scan method is OFF, or if its AUTO
and we are activated
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_scanning_enabled): removed
- nm_dbus_nm_get_scanning_enabled -> nm_dbus_nm_get_wireless_scan_method
- (nm_dbus_nm_methods_setup): remove [get | set] ScanningEnabled and add "getWirelessScanMethod"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@658 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
src/NetworkManagerPolicy.c
src/NetworkManager.c
src/nm-dbus-nm.c
- Remove the "just_added" parameter from nm_device_deactivate(). We no
longer send the DeviceNoLongerActive signal unconditionally, but only
when the device is actually active.
* dispatcher-daemon/NetworkManagerDispatcher.c
- (nmd_execute_scripts): convert to GLib directory functions from opendir(),
and simplify the logic
- (nmd_get_device_name): copy value from dbus reply so we don't segfault when
we free it later on
* initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManagerDispatcher
- Add initscript for NetworkManagerDispatcher
Patch from Bill Moss:
* dispatcher-daemon/NetworkManagerDispatcher.c
- Remove IP4AddressChange signal code including nmd_get_device_ip4_address()
* src/NetworkManagerDbus.c
- (nm_dbus_signal_device_ip4_address_change): remove. If the device goes up,
and DeviceNowActive gets signaled, then the device has a new IP address
anyway. There's no need for a separate signal.
* src/NetworkManagerDevice.c
- (nm_device_update_ip4_address): Don't send IP4AddressChange signal
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Send DeviceNowActive signal when the device
activates successfully. This kind of went missing when I reworked the
activation code.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@634 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Don't set NM_ACT_STAGE_ACTIVATED here, instead...
- (nm_policy_schedule_activation_finish): Set NM_ACT_STAGE_ACTIVATED here to
fix a situation where NM is told to terminate and the device stops activation,
but the main thread isn't aware of that because it would never have run
nm_policy_activation_finish() to set the ACTIVATED flag, because the main loop
had already quit.
* src/NetworkManagerDevice.c
- (nm_device_probe_wired_link_state): cosmetic fixes
- (nm_device_activate_stage5_ip_config_commit): Don't check link state if
we've failed to activate or been canceled.
- (nm_ac_test): nm_debug -> nm_info for "waiting for device to cancel" message
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@616 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-device.c
gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus.c
gnome/applet/applet.c
gnome/applet/applet.h
- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
so we notice when wired device's carriers come back on. Should
fix issue with wired devices being grayed out even if the cable
is in, for devices that support carrier detection.
* gnome/applet/applet.c
- (nmwa_driver_notify): bash focus-stealing prevention in the face
- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
tooltip message
- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
Fix situation where applet wouldn't respond to menu selections
* src/NetworkManager.c
src/NetworkManagerDevice.c
src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)
* src/NetworkManagerDbus.c
- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
Remove, no longer used or relevant
- (nm_dbus_signal_device_status_change): Better signal enum->string matching
- (nm_dbus_schedule_device_status_change_signal): add
* src/NetworkManagerDevice.c
- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
ie don't deactivate them unless explicitly told to by the user. Also send
CARRIER_OFF / CARRIER_ON signals when link changes
- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
Don't print error message when device is no longer around
- (nm_device_deactivate): kill any current DHCP process attached to this device,
not just during activation
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
auto-device-selection.
- (nm_policy_device_change_check): Don't interrupt semi-supported devices
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
is no longer present (Bill Moss)
* src/backends/shvar.c
- (svOpenFile): Open read-only to make SELinux happy
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
the path to the ifcfg-* files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Expose activation stages to NetworkManager clients, like the applet
* Add Diana's progress icons to the applet, cued off NM activation stage
* Use more descriptive tooltips, cued off NM activation stage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@611 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Suggestion from Bill Moss:
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): ignore ENODEV
* src/NetworkManager.c
- (nm_data_free): move destruction of the various managers after
release of device list, because deactivating and freeing a device
requires at least the named manager
- (nm_poll_and_update_wireless_link_state):
(nm_device_link_activated):
(nm_device_link_deactivated):
don't grab the device list lock when actually updating device
link status or strength, since nm_device_set_link_active()
needs to call nm_get_active_device(), which also locks the device list.
* src/NetworkManagerDevice.c
- (nm_device_set_link_active): if a device's link switches from off->on,
and it's wired, and the active device is wireless (or there is no
active device), activate the new device whose link just came on
- (link_to_specific_ap): try to smooth over intermittency in wireless links
my only calling the link to the current ap "failed" when more than 2
consecutive link checks have failed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@606 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_probe_wireless_link_state): don't lock the scan mutex here
but let link_to_specific_ap() do the locking where it needs
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Set MTU of VPN devices to 1412
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@605 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove NM_STATE_SCANNING from NetworkManager.h and applet code
* Fix some holes in device activation and retaining the currently connected
access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@602 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Peter Jones:
* Remove usage of varargs to fix crashes on PPC (RH #154336)
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Fix checking of return value from ioctl()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@592 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches from Tom Parker:
- Fix memleaks
- Join with worker thread rather than polling for its exit
Patch from Bill Moss:
- Cull duplicate ESSIDs from the scan list, taking highest strength AP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@573 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add debug code for socket/file descriptor leaks. We register every socket
that we open (except for stuff in dhcpcd/) for tracking, and print out the
list of sockets that we forgot to close on shutdown. This also consolidates
about 4 places where we opened sockets into 1 function in NetworkManagerUtils.c
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@559 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_call_nm_method): remove some commented code
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_remove_ap_by_essid): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): remove access points from the ignore list
when the user forces them
* src/nm-dbus-device.c
- (nm_dbus_device_get_active_network): fix up escaping of object paths
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@557 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c:
- (nm_completion_scan_has_results): restore pre-completion-patch behavior
of only erroring after the second consecutive scan times out. Also
don't exit when the card requires more time than we can give it, just
log the event and continue.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@552 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Perform scans during device activation, if needed. Both activation
and scans run in the same GMainContext. Therefore, if an access point
is not found by the time the device starts activation, it will not
be available until after activation. We now try to scan during
activation (in nm_wa_test) every 15s so that all available access
points are more likely to be found and available for the activation
procedure.
Also change nm_wireless_link_state_handle() to only update the "best"
AP if we are not forcing a device and if we are not about to change
state. This attempts to work around a race when forcing a device,
where the forced AP would get cleared out too soon by the link state
checking timeout in the main thread, and the activation attempt with
that AP would fail.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@545 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
- (nm_poll_and_update_wireless_link_state): make code less indented
Patch from Bill Moss:
* src/NetworkManager.c
- (nm_device_update_link_state): Update signal strength on wireless
devices every time we update link state too.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@531 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_set_essid): Work around Orinoco cards which need
extra time after setting the ESSID
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@530 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_set_up_down): remove check for unsupported devices
that caused NM to not bring devices up when they were
added to the device list.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@523 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (mdio_read): Fix two bugs that caused all devices to fail
the MII carrier detection support checks
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@514 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_about_cb): Add some more contributors
- (nmwa_update_state): show the applet when there's no connection
- Enable the "Stop/Resume all wireless devices" option in the
context menu
- New "no connection" icon
* src/NetworkManager.c
- (nm_poll_and_update_wireless_link_state): don't do anything if
wireless is disabled or we're asleep
* src/NetworkManagerDHCP.c
- Remove trailing "\n" on debug messages
* src/NetworkManagerDbus.c
- (nm_dbus_network_status_from_data): new state "asleep"
* src/NetworkManagerDevice.c
- Merge most of Peter Jones' "completion" patch that greatly reduces
latency and wait times for most operations
- (nm_device_wireless_scan): Don't scan when asleep
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): return no device when asleep
- (nm_policy_allowed_ap_list_update): From Bill Moss: merge properties
for all wireless devices on update, not just active device
* src/NetworkManagerUtils.c
- Merge Peter Jones' "completion" patch
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_wireless_enabled): bring down wireless devices when
we're told to disable them
- (nm_dbus_nm_sleep, nm_dbus_nm_wake): new functions for sleep/wake
* utils/nm-utils.h
- New variants of the warn/info/error/debug print functions that can take
variables rather than static strings
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@510 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker:
* src/nm-netlink-monitor.c
- Include unistd.h
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_update_network_auth_method): free GConf values
Patch from Nathaniel McCallum <npmccallum@gentoo.org>:
* src/NetworkManagerDevice.c
- (nm_device_set_wireless_config): wait for successful
association longer for some cards (Atheros a/b/g)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@502 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fourth (probably working) cut at porting to
dbus 0.30 api and new hal. This cut adds
some new logging macros to make debugging
easier.
* dispatcher-daemon/NetworkManagerDispatcher.c:
* info-daemon/NetworkmanagerInfo.c:
* info-daemon/NetworkManagerInfoPassphraseDialog.c:
* info-daemon/NetworkManagerInfoVPN.c:
* src/NetworkManager.c:
* src/NetworkManagerAP.c:
* src/NetworkManagerAPList.c:
* src/NetworkManagerDHCP.c:
* src/NetworkManagerDbus.c:
* src/NetworkManagerDevice.c:
* src/NetworkManagerPolicy.c:
* src/NetworkManagerSystem.c:
* src/NetworkManagerUtils.c:
* src/NetworkManagerWireless.c:
* src/autoip.c:
* src/nm-dbus-nm.c:
* src/backends/NetworkManagerDebian.c:
* src/backends/NetworkManagerGentoo.c:
* src/backends/NetworkManagerRedHat.c:
* src/backends/NetworkManagerSlackware.c:
use new logging macros.
* dispatcher-daemon/NetworkManagerDispatcher.c:
(nmd_dbus_filter): s/dbus_free/g_free/
* info-daemon/Makefile.am: link in utils library.
* info-daemon/NetworkmanagerInfo.c: use new logging
macros.
(nmi_dbus_get_network): don't assume enumerations
are 32-bit.
(nmi_dbus_nmi_message_handler): don't free what
doesn't belong to us.
* libnm_glib/libnm_glib.c:
(libnm_glib_get_nm_status):
(libnm_glib_init): don't free what doesn't
belong to us.
(libnm_glib_dbus): strdup result, so it doesn't get
lost when message is unref'd.
* panel-applet/NMWirelessAppletDbus.c:
(nmwa_dbus_update_devices): s/dbus_free/g_free/
* src/NetworkManager.c:
(nm_monitor_wired_link_state): request initial status
dump of all cards when we start up, instead of relying
on /sys/.../carrier.
(nm_info_handler), (nm_set_up_log_handlers):
log handlers to specify what syslog priorites
the logging macros default to.
* src/NetworkManagerAPList.c:
(nm_ap_list_populate_from_nmi):
s/dbus_free_string_array/g_strfreev/
* src/NetworkManagerDbus.c:
(nm_dbus_get_network_object):
validate d-bus message argument types.
Advance message iterator after reading argument,
prepend instead of append to GSList.
* src/NetworkManagerDevice.c:
(nm_device_probe_wired_link_status):
remove redundant /sys in /sys path. remove wrong
contents == NULL means has carrier assumption.
* src/nm-netlink-monitor.c
(nm_netlink_monitor_request_status): implement
function to ask kernel to dump interface link
status over netlink socket.
* test/*.c: s/dbus_free/g_free/
* utils/nm-utils.h:
(nm_print_backtrace): new macro to print backtrace.
(nm_get_timestamp): new macro to get sub-second precise
unix timestamp.
(nm_info), (nm_debug), (nm_warning), (nm_error):
new logging functions. nm_info just prints,
nm_debug includes timestamp and function,
nm_warning includes function, nm_error includes
backtrace and sigtrap.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@497 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Third (unfinished, partially working) cut at porting to
dbus 0.30 api and new hal.
* info-daemon/NetworkManagerInfoDbus.c:
don't free null arrays.
* panel-applet/NMWirelessAppletDbus.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/NetworkManagerDbus.c: more
STRING -> OBJECT_PATH fun
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
(rename nm_device_get_link_active): rename to
nm_device_has_active_link
(nm_device_wireless_link_active): rename to
nm_device_probe_wireless_link_state
(nm_device_wired_link_active): rename to
nm_device_probe_wired_link_state. Rewrite to
use carrier file since hal doesn't maintain
link state anymore.
(nm_device_update_link_active): rename to
nm_device_update_link_state
* src/NetworkManagerPolicy.c
(nm_policy_activation_finish): check for NULL
MAC address.
* src/Makefile.am:
* src/NetworkManagerMain.h:
* src/NetworkManager.c:
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h: New class to support
monitoring wired ethernet link status, since HAL
doesn't export that information anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@495 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
panel-applet/NMWirelessAppletDbus.[ch]
- Move to incremental network updates. Instead of blowing away our list
of devices every time we get a signal from NetworkManager, we now
incrementally add/remove networks when NetworkManager notifies us that
a new network has appeared or disappered. Strength updates now happen
on-the-fly for each access point as well. There are now two copies of
data from NetworkManager: one for the dbus side, and one for the gui side.
When the dbus side data is modified, it is copied over to the gui side
so we don't have to hold the data_mutex for long periods of time (and
therefore block animation of the applet's icon).
- Clean up some memleaks too
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Minor code beautification
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): return whether or not the access point is
completely new and whether or not an existing one's strength was updated.
Try to fix multiple access points and signal strength by using the highest
signal strength in each scan for any given ESSID.
* src/NetworkManagerDbus.[ch]
- (nm_dbus_signal_wireless_network_change): consolidate signals that deal with
wireless networks; now we have only WirelessNetworkUpdate which includes
a UINT32 for Appeared, Disappeared, or StrengthChanged (see NetworkManager.h).
- Kill usage of DbusMessageIter
* src/NetworkManagerDevice.c
- (nm_device_wireless_process_scan_results): Use the same timestamp for all APs
in the same scan result list. Copy ESSIDs-by-address earlier on, for each
AP rather than all-at-once. Also don't ever remove the AP a card is
currently associated with from the network list.
- Update for new signals during scan, send out Appeared, Disappeared, or
StrengthChanged when necessary.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@477 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDHCP.[ch]
- (nm_device_dhcp_remove_timeouts): new function
* src/NetworkManagerDevice.c
- Use nm_device_dhcp_remove_timeouts() everywhere that we need to
remove the DHCP timeouts.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@466 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/essid.glade
panel-applet/NMWirelessAppletOtherNetworksDialog.c
- Correct spelling of "adaptor"->"adapter"
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/NMWirelessApplet.c: Use GTK_CHECK_VERSION() macro.
(nmwa_about_cb): Use standard copyright string. Update comment
text to reflect that it is a notification area applet. Remove
leading newline in authors list.
(nmwa_menu_show_cb, nmwa_setup_widgets): Populate menu on show
instead of on parent menu item activation. Fixes#167550.
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/essid.glade: Capitalize items as per HIG.
Fixes#167632
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@458 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dave Woodhouse for IPv6:
* src/NetworkManagerUtils.c
- (nm_ethernet_address_is_valid): Check for prism54 dummy MAC address
and multicast addresses
* src/NetworkManagerDevice.c
- (nm_device_set_up_down): make sure our cached MAC address is up-to-date
after bringing up a card.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@435 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
