Add nm-core-types.h, typedefing all of the GObject types in
libnm-core; this is needed so that nm-setting.h can reference
NMConnection in addition to nm-connection.h referencing NMSetting.
Removing the cross-includes from the various headers causes lots of
fallout elsewhere. (In particular, nm-utils.h used to include
nm-connection.h, which included every setting header, so any file that
included nm-utils.h automatically got most of the rest of libnm-core
without needing to pay attention to specifics.) Fix this up by
including nm-core-internal.h from those files that are now missing
includes.
Most NMDevice types defined their own error domain but then never used
it. A few did use their errors, but some of those errors are redundant
with NMDeviceError, and others can be added to it.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
NMDeviceBond, NMDeviceBridge, and NMDeviceTeam all used basically the
same code to generate a default interface name. Move it into
nm_utils_complete_generic().
Since we enforce the fact that bond, bridge, team, and vlan
interface-name properties match NMSettingConnection:interface-name,
nm_connection_get_virtual_iface_name() can be replaced with
nm_connection_get_interface_name() basically everywhere.
The one place this doesn't work is with InfiniBand partitions (where
get_virtual_iface_name() was actually computing the name), but for the
most part we only need to care about the interface names of InfiniBand
partitions in places where we also already need to do some other
InfiniBand-specific handling as well, so we can use an
InfiniBand-specific method
(nm_setting_infiniband_get_virtual_interface_name()) to get it.
(Also, while updating nm_device_get_virtual_device_description(), fix
it to handle InfiniBand partitions too.)
For NMDeviceWifi and NMDeviceWimax, the printf format string for
nm_utils_complete_generic() was created based on ssid/nsp. Since
these input strings are untrusted, this is a serious bug.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Now that we have nm_utils_hwaddr_matches() for comparing addresses
(even when one is a string and the other binary), there are now places
where it's more convenient to store hardware addresses as strings
rather than binary, since we want them in string form for most
non-comparison purposes. So update for that.
In particular, this also changes nm_device_get_hw_address() to return
a string.
Also, simplify the update_permanent_hw_address() implementations by
assuming that they will only be called once. (Since they will.)
Add nm_utils_hwaddr_matches(), for comparing hardware addresses for
equality, allowing either binary or ASCII hardware addresses to be
passed, and handling the special rules for InfiniBand hardware
addresses automatically. Update code to use it.
Include <linux/if_ether.h> and <linux/if_infiniband.h> from
nm-utils.h, to get ETH_ALEN and INFINIBAND_ALEN, and remove those
includes (as well as <net/ethernet.h> and <netinet/ether.h>, and
various headers that had been included to get the ARPHRD_* constants)
from other files where they're not needed now.
Drop the arptype-based nm_utils_hwaddr funcs, and rename the
length-based ones to no longer have _len in their names. This also
switches nm_utils_hwaddr_atoba() to using a length rather than an
arptype, and adds a length argument to nm_utils_hwaddr_valid() (making
nm_utils_hwaddr_valid() now a replacement for nm_utils_hwaddr_aton()
in some places, where we were only using aton() to do validity
checking).
Clean up some of the cross-includes between headers (which made it so
that, eg, if you included NetworkManagerUtils.h in a test program, you
would need to build the test with -I$(top_srcdir)/src/platform, and if
you included nm-device.h you'd need $(POLKIT_CFLAGS)) by moving all
GObject struct definitions for src/ and src/settings/ into nm-types.h
(which already existed to solve the NMDevice/NMActRequest circular
references).
Update various .c files to explicitly include the headers they used to
get implicitly, and remove some now-unnecessary -I options from
Makefiles.
These are (most likely) only warnings and not severe bugs.
Some of these changes are mostly made to get a clean run of
Coverity without any warnings.
Error found by running Coverity scan
https://bugzilla.redhat.com/show_bug.cgi?id=1025894
Co-Authored-By: Jiří Klimeš <jklimes@redhat.com>
Signed-off-by: Thomas Haller <thaller@redhat.com>
IPoIB "hardware addresses" are only partly based on the hardware, and
partly based on the InfiniBand configuration. So when checking if a
configuration matches a device, we should only match the fixed part.
Rather than having NMManager know how to parse various settings to
create each kind of software device, add a _new_for_connection()
constructor to each of them and let them call NMPlatform to create the
device correctly themselves.
Software devices don't have a UDI until udev finds them, and since we need
to know about the software devices before udev finds them the UDI will be
missing. Instead of requiring a UDI on NMDevice creation, update the
property from the NMPlatform link change signal when udev does find the
device.
Now that a UDI is no longer required for device creation, software devices
added by NM would be created in the platform_link_added_cb() signal
handler triggered by the various software device creation methods in
system_create_virtual_device() (eg nm_platform_bridge_add() etc). Then
the NMDevice created in system_create_virtual_device() would be a duplicate
and cause problems when it was added. Since system_create_virtual_device()
needs to do setup on some devices, suppress the device creation from the
platform link added handler in this function.
Much of this is a hack which should be cleaned up later.
For device types that don't override it, make
nm_device_get_hw_addr_len() use NMPlatform to find out the actual
hardware address length, rather than just defaulting to ETH_ALEN.
Fixes warnings in the logs when using tun or gre devices.
Rather than passing UDI, ifname, and driver name to the device
constructors as separate arguments, just pass the NMPlatformLink
instead and let it parse them out.
Virtual types still take UDI and ifname separately, since we create
fake NMDevices for them for autoactivating connections. That's weird
in other ways too though, so perhaps this should be revisted.
This is really, really old 2007-era code. Any NMDevice that gets
created is already supported, so there's no reason to have every
device set NM_DEVICE_CAP_NM_SUPPORTED. For those subclasses that
only set that capability, we can remove the subclass method
entirely. Next, it turns out that the "type capabilities" code
wasn't used anywhere, so remove that too. Lastly, "cipsec"
interfaces haven't been used on linux in about 5 years (they
were created by the Cisco binary-only IPSec kernel module for
Cisco VPNs long before vpnc and openswan came around) so we can
remove that code too.
With carrier handling moved to NMDevice, the only thing left in
NMDeviceWired was speed, which was actually ethernet-specific anyway.
So move that to NMDeviceEthernet, and then kill NMDeviceWired.
Change the way that nm-properties-changed-signal works, and parse the
dbus-binding-tool-generated info to get the exact list of properties
that it's expected to export.
This makes NM_PROPERTY_PARAM_NO_EXPORT unnecessary, and also fixes the
problem of properties like NMDevice:hw-address being exported on
classes where it shouldn't be.
