We added "ipv4.route-table-sync" and "ipv6.route-table-sync" to not change
behavior for users that configured policy routing outside of NetworkManager,
for example, via a dispatcher script. Users had to explicitly opt-in
for NetworkManager to fully manage all routing tables.
These settings were awkward. Replace them with new settings "ipv4.route-table"
and "ipv6.route-table". Note that this commit breaks API/ABI on the unstable
development branch by removing recently added API.
As before, a connection will have no route-table set by default. This
has the meaning that policy-routing is not enabled and only the main table
will be fully synced. Once the user sets a table, we recognize that and
NetworkManager manages all routing tables.
The new route-table setting has other important uses: analog to
"ipv4.route-metric", it is the default that applies to all routes.
Currently it only works for static routes, not DHCP, SLAAC,
default-route, etc. That will be implemented later.
For static routes, each route still can explicitly set a table, and
overwrite the per-connection setting in "ipv4.route-table" and
"ipv6.route-table".
We already have nm_strquote_a(). That is useful, but uses alloca(), hence it
is ill suited to be called from a macro, inside a loop, or from a function
that should be inlined.
Instead, add nm_strquote() that has the same purpose but writes to a provided
string buffer.
- clearify in the manual page that setting retry to 1 means to try
once, without retry.
- log the initially set retry value in nm_settings_connection_get_autoconnect_retries().
- use nm_settings_connection_get_autoconnect_retries() in
nm_settings_connection_can_autoconnect().
Rename @error to @out_err_str, because @error is usually used for GError
output arguments.
Also, make the string variables "const char *".
Use nm_assert() in read_field(), because it is a static function
with only four call sites. It's easily verified that the assertion
holds, so no need for a run-time check in production builds.
Expose previously internal function nm_ip_route_equal_full(). It's
just useful API.
However, add a @cmp_flags argument, so that in the future we could
extend it.
For kernel and NetworkManager's core, route identity is a complicated topic
(see NM_PLATFORM_IP_ROUTE_CMP_TYPE_ID). For example, a route
without explity table is treated identical to "table 254" or "table 0".
It would be complicated to have nm_setting_ip_config_add_route()
implement that logic, especially since libnm offers not public API
to expose kernel's logic.
However, previously nm_setting_ip_config_add_route() would only consider
dest/prefix,next_hop,metric when comparing for equality. Hence, with
nmcli connection modify "$CON" +ipv4.routes '192.168.5.0/24'
nmcli connection modify "$CON" +ipv4.routes '192.168.5.0/24 table=42'
the second route was not actually added, although it is a very different
route. Fix that, and consider attributes too. Note that this allows the user
to add two routes that look different to libnm, but are actually idential:
nmcli connection modify "$CON" +ipv4.routes '192.168.5.0/24'
nmcli connection modify "$CON" +ipv4.routes '192.168.5.0/24 table=254'
In the above example, the route instances look different, but
sementically they are both the same route in the main table (254).
This also allows the user to add routes that are semantically different, but
are treated as the same route by kernel:
nmcli connection modify "$CON" +ipv6.routes 'a🅱️c::/120'
nmcli connection modify "$CON" +ipv6.routes 'a🅱️c::/120 mtu=600'
I think libnm should allow to add routes as long as they look different
to libnm. Regardless how kernel and NetworkManager-core thinks about
route identity.
This changes API of nm_setting_ip_config_add_route(). However, I think
the previous behavior was just broken.
Same for nm_setting_ip_config_remove_route_by_value().
GArray's and GPtrArray's plen argument is unsigned. The index variable
to iterate the list, should not have a smaller range (or different data type).
Also, assert against negative idx argument.
At startup the manager tries to create virtual devices without a
specific order and spits warnings when a device can't be realized
because the parent device is not yet created. These failures are not
something the user should worry about because the creation will be
retried when the parent appears.
A better approach is to return an error code from the device's
create_and_realize() telling that it failed because the parent doesn't
exist. In this way, the manager knows that the device isn't ready and
can avoid printing warning messages.
The previous parsing was done using regex. One could implement a
complex regex to parse the setting. However, as it was implemented,
the regex would just pick out parts of the line that it expects,
and ignore unknown parts.
Let's be strict about what we parse. The only strong requirement
is that NM can parse everything that was written by NM itself.
Eventually, we could extend the parser to accept everything that
initscripts accept.
Initscripts split the line at $IFS and do filename globbing on the
arguments. That is ugly, because globbing is of coures wrong (we don't
do that). But also, the splitting at $IFS cannot be escaped, hence for
initscripts it is impossible to use '<space><tab><newline>'. We do that
too, as it makes it easy to parse. Later we may want to extend this to
allow a form of escaping/quoting.
Yes, we may now ignore routes that are not defined as we expect them.
A replacement for g_strsplit_set(). While g_strsplit_set()
does (n+1) malloc and n slice allocations, this needs
roughtly (O(log(n))) mallocs.
Another difference from g_strsplit_set() is that this function
treats multiple delimiters as one (and thus never returns empty
words). While I can see that sometimes you may want to keep empty
words (like parsing a CSV file and preserve empty cells), we usually
use this function for splitting user input. In such case, we want
to treat multiple delimiters as one.
CC libnm-core/libnm_core_libnm_core_la-nm-utils.lo
libnm-core/nm-utils.c:210:6: error: variable 'encodings' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (lang) {
^~~~
libnm-core/nm-utils.c:220:7: note: uninitialized use occurs here
if (!encodings) {
^~~~~~~~~
libnm-core/nm-utils.c:210:2: note: remove the 'if' if its condition is always true
if (lang) {
^~~~~~~~~~
libnm-core/nm-utils.c:198:30: note: initialize the variable 'encodings' to silence this warning
const char *const *encodings;
^
= NULL
Fixes: 28a0627481
When the user sets a GSM or CDMA setting along with a Bluetooth setting
we know we're dealing with a DUN profile. No need to ask.
[thaller@redhat.com: verify() and normalize() must strongly agree whether a
connection is normalizable, and now to do it. That is, after verify()
determines the connection is normalizable, normalize() must fix it as
anticipated.
The reason is, we only want to modify the connection, if we are able
to create a valid result. Hence, after normalize() it *must* verify().
Try to simplify that by moving the logic of fixing the bt-type to a
common place _nm_connection_detect_bluetooth_type().]
Co-Authored-By: Thomas Haller <thaller@redhat.com>
The new device type represents a PPP interface, and will implement the
activation of new-style PPPoE connections, i.e. the ones that don't
claim the parent device.
When the property is set, it specifies the device on which PPPoE is to
be started. The ppp interface will be named as the
connection.interface-name property.
When the property is not set the previous behavior will be retained,
i.e. the PPPoE connection will be started on connection.interface-name
and the PPP interface will have a random name.
- kernel ignores rtm_tos for IPv6 routes. While iproute2 accepts it,
let libnm reject TOS attribute for routes as well.
- move the tos field from NMPlatformIPRoute to NMPlatformIP4Route.
- the tos field is part of the weak-id of an IPv4 route. Meaning,
`ip route add` can add routes that only differ by their TOS.
Software devices don't have a permanent hardware address and thus it
doesn't make sense to enforce the 'fake' (generated) permanent one
when cloned-mac-address=permanent. Also, setting the fake permanent
address on bond devices, prevents them from inheriting the first slave
hardware address, so let's just skip the setting of MAC when
cloned-mac-address=permanent and there is no real permanent address.
https://bugzilla.redhat.com/show_bug.cgi?id=1472965
The settings "bridge.mac-address" and "ethernet.cloned-mac-address" have an
overlapping meaning. If the former is unset, fallback to the latter.
Effectively, "bridge.mac-address" is deprecated in favor of
"ethernet.cloned-mac-address", which is more powerful as it supports
various modes like "stable". However, if a connection specifies
"bridge.mac-address", it is used when creating the bridge interface,
while "ethernet.cloned-mac-address" is used shortly after, during
activation.
Add a stable, recursive merge sort for CList.
This could be improved by doing an iterative implementation.
The recursive implementation's stack depth is not an issue,
as it is bound by O(ln(n)). But an iterative implementation
would safe the overhead of O(n*log(n)) function calls and be
potentially faster.
And get rid of the unused obj_full_equality_allows_different_class.
It's hard to grasp how to implement different object types that can compare
despite having different klasses. The idea was, that stack allocated
objects (used as lookup needles), are some small lightweight objects,
that still compare equal to the full instance. But it's unused. Drop it.
Implement the reference counting of NMPObject as part of
NMDedupMultiObj and get rid of NMDedupMultiBox.
With this change, the NMPObject is aware in which NMDedupMultiIndex
instance it is tracked.
- this saves an additional GSlice allocation for the NMDedupMultiBox.
- it is immediately known, whether an NMPObject is tracked by a
certain NMDedupMultiIndex or not. This saves an additional hash
lookup.
- previously, when all idx-types cease to reference an NMDedupMultiObj
instance, it was removed. Now, a tracked objects stays in the
NMDedupMultiIndex until it's last reference is deleted. This possibly
extends the lifetime of the object and we may reuse it better.
- it is no longer possible to add one object to more then one
NMDedupMultiIndex instance. As we anyway want to have only one
instance to deduplicate the objects, this is fine.
- the ref-counting implementation is now part of NMDedupMultiObj.
Previously, NMDedupMultiIndex could also track objects that were
not ref-counted. Hoever, the object anyway *must* implement the
NMDedupMultiObj API, so this flexibility is unneeded and was not
used.
- a downside is, that NMPObject grows by one pointer size, even if
it isn't tracked in the NMDedupMultiIndex. But we really want to
put all objects into the index for sharing and deduplication. So
this downside should be acceptable. Still, code like
nmp_object_stackinit*() needs to handle a larger object.
Add the NMDedupMultiIndex cache. It basically tracks
objects as doubly linked list. With the addition that
each object and the list head is indexed by a hash table.
Also, it supports tracking multiple distinct lists,
all indexed by the idx-type instance.
It also deduplicates the tracked objects and shares them.
- the objects that can be put into the cache must be immutable
and ref-counted. That is, the cache will deduplicate them
and share the reference. Also, as these objects are immutable
and ref-counted, it is safe that users outside the cache
own them too (as long as they keep them immutable and manage
their reference properly).
The deduplication uses obj_id_hash_func() and obj_id_equal_func().
These functions must cover *every* aspect of the objects when
comparing equality. For example nm_platform_ip4_route_cmp()
would be a function that qualifies as obj_id_equal_func().
The cache creates references to the objects as needed and
gives them back. This happens via obj_get_ref() and
obj_put_ref(). Note that obj_get_ref() is free to create
a new object, for example to convert a stack-allocated object
to a (ref-counted) heap allocated one.
The deduplication process creates NMDedupIndexBox instances
which are the ref-counted entity. In principle, the objects
themself don't need to be ref-counted as that is handled by
the boxing instance.
- The cache doesn't only do deduplication. It is a multi-index,
meaning, callers add objects using a index handle NMDedupMultiIdxType.
The NMDedupMultiIdxType instance is the access handle to lookup
the list and objects inside the cache. Note that the idx-type
instance may partition the objects in distinct lists.
For all operations there are cross-references and hash table lookups.
Hence, every operation of this data structure is O(1) and the memory
overhead for an index tracking an object is constant.
The cache preserves ordering (due to linked list) and exposes the list
as public API. This allows users to iterate the list without any
additional copying of elements.
Commit df0dc912cc ("8021x: don't request secrets if they are empty
and system owned") changed need_private_key_password() to return FALSE
when flags are NONE. This broke authentication using an encrypted
private key because after this the key password is never added to the
applied connection.
Don't require a password with NONE flags only for the PKCS11 scheme.
Fixes: df0dc912cc
