We only needed proper glib enum types for having properties
and signal arguments. These got all converted to plain int,
so no longer generate such an enum type.
Had to rename "nm-enum-types.h" because it works badly with
"libnm/nm-enum-types.h". Maybe I could fix that differently,
but duplicate names is anyway error prone.
Note that "nm-core-enum-types.h" is already taken too, so
"nm-src-enum-types.h" it is.
An interface would make sense to allow the actual device-factory to inherit
from another type.
However, glib interfaces make code much harder to follow and less
efficient. The device factory shall be a very simple type with meta data
about supported device types and the ability to create device instances.
There is no need to make this an interface implementation, instead just
let the factories inherit from NM_TYPE_DEVICE_FACTORY directly.
Some TTY drivers or devices appear to ignore port speed and always
report zero. Technically this means the port is hung up and control
lines should be disconnected, but with USB devices many of the serial
port attributes are meaningless and ignored by some devices.
pppd requires the port's speed to be greater than zero, and will
exit immediately when that is not the case, even though these
modems will work fine. Passing an explicit speed to pppd in this
case works around the issue, as pppd attempts to set that speed
on the port and doesn't actually care if that operation fails.
https://bugzilla.redhat.com/show_bug.cgi?id=1281731
- use _NM_GET_PRIVATE() and _NM_GET_PRIVATE_PTR() everywhere.
- reorder statements, to have GObject related functions (init, dispose,
constructed) at the bottom of each file and in a consistent order w.r.t.
each other.
- unify whitespaces in signal and properties declarations.
- use NM_GOBJECT_PROPERTIES_DEFINE() and _notify()
- drop unused signal slots in class structures
- drop unused header files for device factories
enables (back) matching against 802-3-ethernet.mac-address and
802-3-ethenet.mac-address-blacklist connection parameters
for MAC addresses belonging to virtual devices too.
No longer typedef NMDeviceEthernet to NMDevice. We don't do that
for most other classes, and I think it is not a good pattern
(yes, the casts are cumbersome, but what can you do).
Also, embed a pointer to the private data in NMDeviceEthernet
for fast lookup and ease of debugging.
We should overwrite the constructed() method instead of hooking the
GObject creation via constructed(). That is much cleaner as at that
point the GObject is fully initialized.
Also, this avoids a pointless warning when trying to get the not yet
initialized GUdevDevice:
<debug> [1467714778.0958] platform: signal: link added: 15: eth0 <DOWN;broadcast,multicast> mtu 1500 arp 1 ethernet? not-init addrgenmode eui64 addr AA:BB:CC:DD:EE:FF driver e1000e
<warn> [1467714778.0961] device (eth0): failed to find device 15 'eth0' with udev
<debug> [1467714778.0962] device[0x562eac10ee50] (eth0): constructed (NMDeviceEthernet)
...
<debug> [1467714778.1334] platform: signal: link changed: 15: enp0s25 <DOWN;broadcast,multicast> mtu 1500 arp 1 ethernet? init addrgenmode eui64 addr AA:BB:CC:DD:EE:FF driver e1000e
Instead of letting different subclasses call reset in their
virtual deactivate() function, do it in the parent class.
This works nicely, because the parent know whether the MAC
address is currently modified.
When a user want to explicitly spoof the MAC address, a failure
to do so should fail activation. For one, failing to do so may
be a security problem. In any case, if user asks to configure the
interface in a certain way and we fail to do so that shall result
in a failure to activate.
Extend the "ethernet.cloned-mac-address" and "wifi.cloned-mac-address"
settings. Instead of specifying an explicit MAC address, the additional
special values "permanent", "preserve", "random", "random-bia", "stable" and
"stable-bia" are supported.
"permanent" means to use the permanent hardware address. Previously that
was the default if no explict cloned-mac-address was set. The default is
thus still "permanent", but it can be overwritten by global
configuration.
"preserve" means not to configure the MAC address when activating the
device. That was actually the default behavior before introducing MAC
address handling with commit 1b49f941a6.
"random" and "random-bia" use a randomized MAC address for each
connection. "stable" and "stable-bia" use a generated, stable
address based on some token. The "bia" suffix says to generate a
burned-in address. The stable method by default uses as token the
connection UUID, but the token can be explicitly choosen via
"stable:<TOKEN>" and "stable-bia:<TOKEN>".
On a D-Bus level, the "cloned-mac-address" is a bytestring and thus
cannot express the new forms. It is replaced by the new
"assigned-mac-address" field. For the GObject property, libnm's API,
nmcli, keyfile, etc. the old name "cloned-mac-address" is still used.
Deprecating the old field seems more complicated then just extending
the use of the existing "cloned-mac-address" field, although the name
doesn't match well with the extended meaning.
There is some overlap with the "wifi.mac-address-randomization" setting.
https://bugzilla.gnome.org/show_bug.cgi?id=705545https://bugzilla.gnome.org/show_bug.cgi?id=708820https://bugzilla.gnome.org/show_bug.cgi?id=758301
Both NMDeviceEthernet and NMDeviceWifi have a property "perm-hw-address".
As the hw_addr_perm property is tracked in the parent NMDevice class,
let it also implement the GObject property.
Then it knows better when to emit a notification about property
changes.
While a device is realized, we only want to read the permanent
MAC address once. If that fails, we fallback to the current MAC
address. Thus, we want the permanent address be stable until
the device unrealizes.
While we want to fallback to the current MAC address, in some cases
the caller wants to know whether this was a "real" permanent MAC
address as read via ethtool.
For example, when matching an ethernet device against ethernet.mac-address
property, the fake (current) address should not be used in such case.
The current MAC address is part of NMPlatformLink in the platform cache.
When it changes, we must update the device's current value.
Also, the MAC address of NMDeviceEthernet is exposed on D-Bus. That
property should show the currently configured MAC address, not a state
that was read some time in the past.
Also, nm_device_hw_addr_set() compares the current MAC address before
resetting it. If that field is out-of-date, nm_device_hw_addr_set() will
behave wrongly.
NMDeviceEthernet had some special handling in link_changed() that would
re-read the MAC addresses and possibly bring up the interface. Move that
code to the parent device.
When the entire NMSettingWired setting is missing, it should be treated
exactly the same as each property having the default/unset value.
Otherwise, adding a NMSettingWired setting only to set (say) MTU,
would result in different behavior. Although effectively the
"cloned-mac-address" shall be in both cases the same.
Instead of accessing the singleton getter nm_settings_get(), obtain
the settings instance from the device instance itself via
nm_device_get_settings().
The 'portname' sysfs attribute of s390 devices is deprecated since
kernel 4.4 and always set to 'no portname required'. But even on older
kernels such value must be interpreted as an unset portname and thus
ignored.
https://bugzilla.redhat.com/show_bug.cgi?id=1327204
Generate a stable connection UUID for the default-wired-connection.
Otherwise, on every reboot, the UUID changes although the generated
connection is the same.
But also hash into the UUID the machine-id, the device name and the
hardware address. So, the UUID is only the same if the connection is
identical in every aspect.
Also, the UUID is used as Network_ID for the stable-privacy address
generation mode. It is bad to re-create different UUIDs on every boot
as it causes different addresses.
Otherwise the connection wouldn't verify:
<error> [1458066126.2270] device (eth10): Generated connection does not verify:
connection.type: property type should be set to '802-3-ethernet'
<debug> [1458066126.2271] manager: (eth10): can't assume; no connection
(cherry picked from commit 4b71939e9ac3df93bfe72af0eac42b4ebaf94e15)
str_if_set() was added to replace the non-standard gcc extension "?:".
However, "?:" is supported by clang as well and we already use it at
several places.
Also, str_if_set() did not follow our naming scheme and renaming to
nm_str_if_set() would be ugly. So just drop it.
Functions that take a GError** MUST fill it in on error. There is no
need to check whether error is NULL if the function it was passed to
had a failing return value.
Likewise, a proper GError must have a non-NULL message, so there's no
need to double-check that either.
Based-on-patch-by: Dan Winship <danw@gnome.org>
Don't rely on what's already on the device. It could be that the MAC address
set on the device is not meaningful -- the NM crashed while two devices were
teamed together and now they have the same hardware address and now it's
impossible to bond them with mode=5.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
nm_supplicant_manager_iface_get() would cache and reuse the supplicant
interface. But no ref-counting was in place so that the first user returning
the interface via nm_supplicant_manager_iface_release() would destroy the
instance for others.
This is broken for a very long time. Which shows that we hardly ever
have a cache-hit and usually create a new instance. So, instead of
letting nm_supplicant_manager_create_interface() check for existing
supplicant interface, always create a new instance. This also makes
sense, because we would expect that per ifname only one instance is
requested at a time. Also add an assertion that we don't return
multiple supplicant interface instances for the same ifname.
Drop nm_supplicant_manager_iface_release() in favor of requiring users
to unref the returned instance.
Also, use a GSList instead of a GHashTable for the cache.
Also, previously callers would pass @is_wireless to nm_supplicant_manager_iface_get(),
but the cache lookup did not consider that value. That doesn't matter
now as we always create a new instance.
https://bugzilla.redhat.com/show_bug.cgi?id=1298007
All implementations of NMDevice:setup_start() in derived classes
invoke the parent implementation first. Enforce that by moving
NMDevice:setup_start() to realize_start_setup() and only notify
derived classes afterwards via NMDevice:realize_start_notify().
