Hook the signal handlers right before the main loop. Prior to that
the default handlers are good enough and our one crashes (due to
loop being instantialized).
Also, set the return value properly to indicate a termination by a
signal.
(cherry picked from commit edf6f826b5)
On "nmcli agent all", when the polkit agent fails (while the NM agent
succeeds), the failure is not communicated until the client exits.
(cherry picked from commit 7e8a84ae10)
'nmcli device wifi connect' only supports WEP and WPA-PSK at the
moment, but not WPA-EAP. If the AP supports both WPA-PSK and WPA-EAP,
nmcli doesn't add the PSK to the connection, causing a connection
failure. Fix this.
https://bugzilla.redhat.com/show_bug.cgi?id=1492064
(cherry picked from commit 7af471919a)
The INT signal can arrive after a new line has been processed in
nmc_readline_helper(). In such case, the handler gets uninstalled by
readline_cb() and nmc_seen_sigint() returns TRUE. However it's an
error to call rl_callback_read_char() without handler, don't do it.
Fixes the following:
"readline: readline_callback_read_char() called with no handler!"
#0 __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 __GI_abort () at abort.c:90
#2 rl_callback_read_char () at ../callback.c:116
#3 nmc_readline_helper (prompt=prompt@entry=0x2aa0d229080 "nmcli> ") at clients/cli/common.c:1387
#4 nmc_readline (prompt_fmt=prompt_fmt@entry=0x2aa0036ac9e "%s") at clients/cli/common.c:1448
#5 do_connection_edit (connection=0x2aa0d215440, nmc=0x2aa00391298 <nm_cli>) at clients/cli/connections.c:7072
Fixes: 995229181chttps://bugzilla.redhat.com/show_bug.cgi?id=1458311
(cherry picked from commit cd3a561251)
When running one of:
nmcli device wifi list ifname wlan0
nmcli device wifi connect ... ifname wlan0
nmcli wrongly adds the device name to the output.
Do the completion only when requested.
Fixes: 8679793f6b
Fixes: 1a0dfd31c4
(cherry picked from commit d2b4332b36)
Now that routes can include optional attributes, print the expected
syntax in case of parsing failure.
$ nmcli connection modify dummy ipv4.routes a
Error: failed to modify ipv4.routes: invalid route: Invalid IPv4
address 'a'. The valid syntax is: 'ip[/prefix] [next-hop] [metric]
[attribute=val]... [,ip[/prefix] ...]'.
(cherry picked from commit 00df57a066)
Cherry-picked commit from master which used the new
nmc->nmc_config member not available in nm-1-8.
We should use the nmc->show_secret member here.
Fixes: d4c8a3fbf2
'nmcli connection show <con_id1> --show-secrets'
secrets were not shown.
'nmcli connection show <con_id1> --show-secrets <con_id2>'
secrets were shown only for connection ids following the
"--show-secrets" option (so only for 'con_id2').
Fix these behaviors showing secrets for all connections also
if the "--show-secrets" option is put after the connection ids.
(cherry picked from commit 4bdb6b026a)
If the D-Bus call to DeactivateConnection() fails, don't wait for the
connection to change state because this is not going to
happen. Instead, notify the user of the error and, if necessary, wait
for remaining connections to be deactivated.
https://bugzilla.redhat.com/show_bug.cgi?id=1422786
(cherry picked from commit 67d144dd1e)
Call get_device_list() after next_arg(); call it only after checking
that there are other arguments after "monitor".
Fixes: 6a3d77fbe6
(cherry picked from commit 2c4e991aba)
Options dependant on specific commands (e.g., nmcli connection show
--active) are now allowed to be processed by the next_arg() function.
This would allow autocompletion to expand options belonging to specific
command first, and then global ones.
Note that global options ("--ask" and "--show-secrets") will be auto-completed
everywhere but only if at least a '-' is passed. Command specific ones
(--temporary, --active, --order) will be auto-completed only after the command
they belongs to but without requiring the user to pass a heading '-'.
Example:
'nmcli connection show -a'
will expand '-a' into '--active', but
'nmcli connection add -a`
will expand '-a' into '--ask' (as it is a global option)
This commit fixes also autocompletion for:
nmcli connection modify --temporary
(cherry picked from commit 6a3d77fbe6)
This happens when the connection is in "activating" state and
the connection is a master one waiting for slaves: "check_activated()"
is called by the active_connection_state_cb() and device_state_cb() callbacks.
If the device has already moved to a state >= NM_DEVICE_STATE_IP_CONFIG, the
call to active_connection_state_cb() will end calling
activate_connection_info_finish(), freeing the "info" object. The subsequent
call to device_state_cb() will result in accessing the freed "info".
Just call check_activated() once after registering the
active_connection_state() and device_state_cb() callbacks.
(cherry picked from commit 3d4d1bedda)
Fixes the parsing for correct and incorrect commands.
e.g.:
nmcli connection down id <conn>
nmcli -t
...
Fixes: 16902a2be6
(cherry picked from commit ef0d0d08eb)
Shift argc and argc manually between argument ant its value and use
next_arg() between arguments everywhere. Whill be useful to parse global
arguments.
moved from: char *colorize_string (..., gboolean &dealloc)
to: const char *colorize_string (..., char **out_to_free)
No more needed to cast (char *) on a (const char *).
Fixed also get_value_to_print() which relies on colorize_string()
When a full section is specified as the field parameter in terse tabular
mode, the section name should be printed followed by all the field values
belonging to that section separated by ':'. The NAME of section CONNECTIONS
was missing.
sample command:
$ nmcli -m tab -t -f CONNECTIONS device show ens3
previous output was:
/org/freedesktop/NetworkManager/Settings/{1}:5059XXX-XXXX.. | ens3-dhcp
now:
CONNECTIONS:/org/freedesktop/NetworkManager/Settings/{1}:5059XXX-XXXX.. | ens3-dhcp
When only the main header should be printed and output mode
is 'pretty' skip the construction of the string containing
field values as it will not be used.
Don't print value output in the "PRETTY" format when the --terse option
has been specified.
This should allow to feed back the output from "nmcli show" to "nmcli
modify" without changes.
Track both device and active connections at the same time and decide
whether activation finished (either successfully or not) in a single
place, check_activated().
This makes the already too complex code path a bit more straightforward
and also makes it possible to be more reasonable about the diagnostics.
Now that the active connection signals the reason, we include it; but if
the failure is due to the device disconnection while we're activating,
include a device reason instead, since it's often more useful. Like:
Before:
Error: Connection activation failed.
Without considering the device:
Error: Connection activation failed: the base network connection was interrupted
After:
Error: Connection activation failed: The Wi-Fi network could not be found
In practice, this should only matter when there are multiple
header files with the same name. That is something we try
to avoid already, by giving headers a distinct name.
When building NetworkManager itself, we clearly want to use
double-quotes for including our own headers.
But we also want to do that in our public headers. For example:
./a.c
#include <stdio.h>
#include <nm-1.h>
void main() {
printf ("INCLUDED %s/nm-2.h\n", SYMB);
}
./1/nm-1.h
#include <nm-2.h>
./1/nm-2.h
#define SYMB "1"
./2/nm-2.h
#define SYMB "2"
$ cc -I./2 -I./1 ./a.c
$ ./a.out
INCLUDED 2/nm-2.h
Exceptions to this are
- headers in "shared/nm-utils" that include <NetworkManager.h>. These
headers are copied into projects and hence used like headers owned by
those projects.
- examples/C
