When receiving IP changes via platform event, remove all missing
addresses and routes from our internal configurations (such as
wwan, vpn, dhcp).
The effect is that on the next commit, those addresses and routes will
not be re-added as they were explicitly removed by the user.
However on a new DHCP lease or similar events, the addresses will
be added anew.
Another important improvement is that the NMIPxConfig of the active
device reflects when addresses or routes get removed externally. Before
we would continue to expose those entires although they were not
actually configured on the device.
https://bugzilla.gnome.org/show_bug.cgi?id=740443
In the IPv4 case, we check whether we have a direct route to the gateway
also by looking at the configured addresses/subnets. That is correct,
because every IPv4 address also implies a subnet route.
For IPv6, we explicitly add all subnet routes manually (noprefixroute),
hence, we have a direct route exactly if we have it in our list.
Regardless of the configured IPv6 prefixes.
The previous syntax (s/S for synced, n/N for never-default) is confusing.
Indicate 'never-default' by '0', vs. '1'.
Indicated synced/non-synced as '+sync' and '-sync'.
Since 03a5a85d, NMDeviceTeam was trying to use priv->teamd_pid to
decide whether a teamd_dbus_vanished() call indicated "teamd hasn't
been started yet" or "teamd was previously started and has now
exited". But this resulted in a race condition, where at startup, a
device could call g_dbus_watch_name(), then launch teamd (causing
teamd_pid to get set), and then have gdbus report that teamd hasn't
been started yet before the newly-launched teamd managed to grab the
bus name. Since teamd_pid would already be set when
teamd_dbus_vanished() was called, it would decide that this meant
"teamd was previously started and has now exited", so it would call
teamd_cleanup(), killing the just-started teamd process.
Fix this by having teamd_dbus_vanished() check priv->tdc instead,
which doesn't get set until after the first teamd_dbus_appeared()
call.
We forgot to include the BRIDGE, so that bridge
devices got a default priority (route-metric) of 950
Add it between VLAN and MODEM type.
Also return a different metric for UNKNOWN
device types, but these priorities are not
actually expected.
ModemManager needs to have CLOCAL set in the TTY termios configuration, in order
to notify the kernel that modem control lines are not in effect (e.g. so that a
transition to LOW in the DCD input control line doesn't trigger a hangup in the
TTY).
pppd in the other hand, needs CLOCAL unset in order to have proper modem control
lines in effect during the PPP session. So, when pppd starts it will store the
original termios settings, and before exiting it will restore the original
settings in the TTY. In other words, if CLOCAL was set before launching pppd,
CLOCAL will be also set after pppd exits.
Now, in order for this sequence to work correctly, NetworkManager also needs to
make sure that ModemManager is notified about the disconnection only after pppd
has really finished re-configuring the TTY.
https://bugzilla.gnome.org/show_bug.cgi?id=734347
----------------------
Once the patch is applied, we will be making sure that ModemManager is only
notified about the disconnection AFTER pppd has fully exited:
NetworkManager[27589]: <info> (ttyUSB2): device state change: activated -> deactivating (reason 'user-requested') [100 110 39]
Terminating on signal 15
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 8 / phase 'network'
Connect time 0.3 minutes.
Sent 56 bytes, received 0 bytes.
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 11 / phase 'disconnect'
Connection terminated.
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 1 / phase 'dead'
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_exit_notify): cleaning up
NetworkManager[27589]: <warn> pppd pid 27617 exited with error: pppd received a signal
NetworkManager[27589]: <info> (ttyUSB2): modem state changed, 'connected' --> 'disconnecting' (reason: user-requested)
NetworkManager[27589]: <info> (ttyUSB2): modem state changed, 'disconnecting' --> 'registered' (reason: user-requested)
NetworkManager[27589]: <info> (ttyUSB2) modem deactivation finished
NetworkManager[27589]: <info> (ttyUSB2): device state change: deactivating -> disconnected (reason 'user-requested') [110 30 39]
NetworkManager[27589]: <info> (ttyUSB2): deactivating device (reason 'user-requested') [39]
Add nm_utils_setpgid() as a g_spawn*() child setup function for
calling setpgid(), and use it where appropriate rather than
reimplementing it every time.
There's no point in calling setpgid() on short-lived processes, so
remove the setpgid() calls when spawning dispatcher scripts, iptables,
iscsiadmin, and netconf.
nm-iface-helper originally used the same pthread_sigmask()-based
signal handling as NetworkManager, but was then switched to using
g_unix_signal_add(). But a little bit of unnecessary code remained.
Replace the pthread_sigwait()-based signal handling with
g_unix_signal_add()-based handling, and get rid of all the
now-unnecessary calls to nm_unblock_posix_signals() when spawning
subprocesses.
As a bonus, this also fixes the "^C in gdb kills NM too" bug.
Testing WWAN connections through a Nokia Series 40 phone, addresses of family
AF_PHONET end up triggering an assert() in object_has_ifindex(), just because
object_type_from_nl_object() only handles AF_INET and AF_INET6 address.
In order to avoid this kind of problems, we'll try to make sure that the object
caches kept by NM only store known object types.
(fixup by dcbw to use cached passed to cache_remove_unknown())
https://bugzilla.gnome.org/show_bug.cgi?id=742928
Connect: ppp0 <--> /dev/ttyACM0
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
NetworkManager[27434]: <info> (ppp0): new Generic device (driver: 'unknown' ifindex: 12)
NetworkManager[27434]: <info> (ppp0): exported as /org/freedesktop/NetworkManager/Devices/4
[Thread 0x7ffff1ecf700 (LWP 27439) exited]
NetworkManager[27434]: <info> (ttyACM0): device state change: ip-config -> deactivating (reason 'user-requested') [70 110 39]
Terminating on signal 15
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate'
**
NetworkManager:ERROR:platform/nm-linux-platform.c:1534:object_has_ifindex: code should not be reached
Program received signal SIGABRT, Aborted.
0x00007ffff4692a97 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff4692a97 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff4693e6a in abort () from /usr/lib/libc.so.6
#2 0x00007ffff4c8d7f5 in g_assertion_message () from /usr/lib/libglib-2.0.so.0
#3 0x00007ffff4c8d88a in g_assertion_message_expr () from /usr/lib/libglib-2.0.so.0
#4 0x0000000000472b91 in object_has_ifindex (object=0x8a8320, ifindex=12) at platform/nm-linux-platform.c:1534
#5 0x0000000000472bec in check_cache_items (platform=0x7fe8a0, cache=0x7fda30, ifindex=12) at platform/nm-linux-platform.c:1549
#6 0x0000000000472de3 in announce_object (platform=0x7fe8a0, object=0x8a8c30, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL) at platform/nm-linux-platform.c:1617
#7 0x0000000000473dd2 in event_notification (msg=0x8a7970, user_data=0x7fe8a0) at platform/nm-linux-platform.c:1992
#8 0x00007ffff5ee14de in nl_recvmsgs_report () from /usr/lib/libnl-3.so.200
#9 0x00007ffff5ee1849 in nl_recvmsgs () from /usr/lib/libnl-3.so.200
#10 0x00000000004794df in event_handler (channel=0x7fc930, io_condition=G_IO_IN, user_data=0x7fe8a0) at platform/nm-linux-platform.c:4152
#11 0x00007ffff4c6791d in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#12 0x00007ffff4c67cf8 in ?? () from /usr/lib/libglib-2.0.so.0
#13 0x00007ffff4c68022 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#14 0x00000000004477ee in main (argc=1, argv=0x7fffffffeaa8) at main.c:447
(gdb) fr 4
#4 0x0000000000472b91 in object_has_ifindex (object=0x8a8320, ifindex=12) at platform/nm-linux-platform.c:1534
1534 g_assert_not_reached ();
The address might be zero-size, and therefore nl_addr_get_binary_addr()
returns a pointer to a zero-size array. We don't want to read past the
end of that array. Since zero-size addresses really mean an address
of all zeros, just make that happen.
As an additional optimization, if the prefix length is zero, the whole
address is host bits and should be cleared.
==30286== Invalid read of size 4
==30286== at 0x478090: clear_host_address (nm-linux-platform.c:3786)
==30286== by 0x4784D4: route_search_cache (nm-linux-platform.c:3883)
==30286== by 0x4785A1: refresh_route (nm-linux-platform.c:3901)
==30286== by 0x4787B6: ip4_route_delete (nm-linux-platform.c:3978)
==30286== by 0x47F674: nm_platform_ip4_route_delete (nm-platform.c:1980)
==30286== by 0x4B279D: _v4_platform_route_delete_default (nm-default-route-manager.c:1122)
==30286== by 0x4AEF03: _platform_route_sync_flush (nm-default-route-manager.c:320)
==30286== by 0x4B043E: _resync_all (nm-default-route-manager.c:574)
==30286== by 0x4B0CA7: _entry_at_idx_remove (nm-default-route-manager.c:631)
==30286== by 0x4B1A66: _ipx_update_default_route (nm-default-route-manager.c:806)
==30286== by 0x4B1A9C: nm_default_route_manager_ip4_update_default_route (nm-default-route-manager.c:813)
==30286== by 0x45C3BC: _cleanup_generic_post (nm-device.c:7143)
==30286== Address 0xee33514 is 0 bytes after a block of size 20 alloc'd
==30286== at 0x4C2C080: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==30286== by 0x6B2B0B1: nl_addr_alloc (in /usr/lib/libnl-3.so.200.20.0)
==30286== by 0x6B2B0E3: nl_addr_build (in /usr/lib/libnl-3.so.200.20.0)
==30286== by 0x6B2B181: nl_addr_clone (in /usr/lib/libnl-3.so.200.20.0)
==30286== by 0x66DB0D7: ??? (in /usr/lib/libnl-route-3.so.200.20.0)
==30286== by 0x6B33CE6: nl_object_clone (in /usr/lib/libnl-3.so.200.20.0)
==30286== by 0x6B2D303: nl_cache_add (in /usr/lib/libnl-3.so.200.20.0)
==30286== by 0x472E55: refresh_object (nm-linux-platform.c:1735)
==30286== by 0x473137: add_object (nm-linux-platform.c:1795)
==30286== by 0x478373: ip4_route_add (nm-linux-platform.c:3846)
==30286== by 0x47F375: nm_platform_ip4_route_add (nm-platform.c:1939)
==30286== by 0x4AEC06: _platform_route_sync_add (nm-default-route-manager.c:254)
https://bugzilla.gnome.org/show_bug.cgi?id=742937
Testing WWAN connections through a Nokia Series 40 phone, addresses of family
AF_PHONET end up triggering an assert() in object_has_ifindex(), just because
object_type_from_nl_object() only handles AF_INET and AF_INET6 address.
In order to avoid this kind of problems, we'll try to make sure that the object
caches kept by NM only store known object types.
https://bugzilla.gnome.org/show_bug.cgi?id=742928
Connect: ppp0 <--> /dev/ttyACM0
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish'
NetworkManager[27434]: <info> (ppp0): new Generic device (driver: 'unknown' ifindex: 12)
NetworkManager[27434]: <info> (ppp0): exported as /org/freedesktop/NetworkManager/Devices/4
[Thread 0x7ffff1ecf700 (LWP 27439) exited]
NetworkManager[27434]: <info> (ttyACM0): device state change: ip-config -> deactivating (reason 'user-requested') [70 110 39]
Terminating on signal 15
nm-pppd-plugin-Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate'
**
NetworkManager:ERROR:platform/nm-linux-platform.c:1534:object_has_ifindex: code should not be reached
Program received signal SIGABRT, Aborted.
0x00007ffff4692a97 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff4692a97 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff4693e6a in abort () from /usr/lib/libc.so.6
#2 0x00007ffff4c8d7f5 in g_assertion_message () from /usr/lib/libglib-2.0.so.0
#3 0x00007ffff4c8d88a in g_assertion_message_expr () from /usr/lib/libglib-2.0.so.0
#4 0x0000000000472b91 in object_has_ifindex (object=0x8a8320, ifindex=12) at platform/nm-linux-platform.c:1534
#5 0x0000000000472bec in check_cache_items (platform=0x7fe8a0, cache=0x7fda30, ifindex=12) at platform/nm-linux-platform.c:1549
#6 0x0000000000472de3 in announce_object (platform=0x7fe8a0, object=0x8a8c30, change_type=NM_PLATFORM_SIGNAL_REMOVED, reason=NM_PLATFORM_REASON_EXTERNAL) at platform/nm-linux-platform.c:1617
#7 0x0000000000473dd2 in event_notification (msg=0x8a7970, user_data=0x7fe8a0) at platform/nm-linux-platform.c:1992
#8 0x00007ffff5ee14de in nl_recvmsgs_report () from /usr/lib/libnl-3.so.200
#9 0x00007ffff5ee1849 in nl_recvmsgs () from /usr/lib/libnl-3.so.200
#10 0x00000000004794df in event_handler (channel=0x7fc930, io_condition=G_IO_IN, user_data=0x7fe8a0) at platform/nm-linux-platform.c:4152
#11 0x00007ffff4c6791d in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#12 0x00007ffff4c67cf8 in ?? () from /usr/lib/libglib-2.0.so.0
#13 0x00007ffff4c68022 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#14 0x00000000004477ee in main (argc=1, argv=0x7fffffffeaa8) at main.c:447
(gdb) fr 4
#4 0x0000000000472b91 in object_has_ifindex (object=0x8a8320, ifindex=12) at platform/nm-linux-platform.c:1534
1534 g_assert_not_reached ();
Don't start an automatic connectivity check right when NMManager tells
us we're online; only do it if the manager doesn't request an explicit
connectivity check immediately afterward.
Merge the two nm_connectivity_set_online() calls into one, after
tweaking NMConnectivity to always update its internal state before
alerting callers to the new state.
When a connection has finished activating, but we don't know yet that
we have full connectivity, then find_best_device_state() should return
CONNECTED_SITE, not CONNECTING. Fixes a bug where the manager state
would repeatedly switch between those two states.
nm-connectivity was logging both "started" and "finished" for periodic
connectivity checks, but was only logging "finished" for manual ones,
which made the logs look weird. Fix it to log both periodic and manual
starts, and differentiate them.
Also add some additional logging to indicate when set_online() is
called, and when :state changes.
Custom IP ranges for shared connection were implemeted in bgo #6759732
(commit 32a001f526). The first IP address
is used and a range is calculated.
However, the commit missed to update ifcfg-rh plugin to read the address.
Test case:
* use ifcfg-rh plugin for NetworkManager
$ nmcli con add type eth con-name shared-ip ifname eth0
$ nmcli con mod shared-ip ipv4.addresses 9.8.7.6/24 ipv4.method shared
$ nmcli con show shared-ip
$ nmcli con show shared-ip <--- ip address 9.8.7.6 was missing
https://bugzilla.redhat.com/show_bug.cgi?id=1174632
This was not really an error, because NMIfcfgConnection would not
watch the files if monitoring is not enabled. Still do it, because
it feels more correct.
Make update_connection() analogous to keyfiles implementation.
Effectively merge _internal_new_connection() and update_connection()
-- previously connection_new_or_changed().
https://bugzilla.redhat.com/show_bug.cgi?id=1171751
Presort the files in read_connections() as we do it
for keyfile.
This alone has not much consequences. Do this patch first, to
keep the next patches more self-contained.
The ifcfg-rh implementation should be similar to the one from keyfile.
Rename the variables and function that have the same meaning.
Do this trivial commit first, before starting refactoring.
When adding a connection to NMSettings we did not check for
duplicate connection UUIDs (which could for example happen
if two different plugins report a conflicting UUID).
Also, we would not check that an already added connection
changes it's UUID.
Both could lead to have duplicate connections (by UUID).
Avoid that two ways:
- when adding a connection to NMSettings, ensure that we don't add
a conflicting UUID. Otherwise just bail out and do nothing.
- when modifying a connection that is already added to NMSettings,
enforce that the UUID cannot change. Otherwise fail with error.
For ifcfg-rh plugin this situation still can happen during reload.
In this case error out and refuse to update the connection. After
all, the user configured invalid UUIDs.
https://bugzilla.redhat.com/show_bug.cgi?id=1171751
Also during add_connection() we must take special care of not "adding" a
connection with a conflicting UUID. In that case we want to fallback to
"update".
update_connection() already does all the checks, so call
update_connection() from add_connection().
If there are keyfiles with duplicate UUIDs, read_connections()
would iterate over the files, loading them as they appear and
overwriting duplicate connections that were just loaded.
For example, have keyfiles 'A' and 'B' with the same UUID.
On start, NM might first load 'A', then 'B'. 'B' would replace the
content of 'A' which was just loaded.
On reload, NM would first overwrite 'B' with 'A', and then again
overwriting 'A' with 'B'.
Fix that by accept the first found connection and don't overwrite
it during the same read_connections() run.
Also sort the files by file modification timestamp so that we
get a reproducible and sensible behavior.
new_connection() and update_connection() are very similar as both
must anticipate collisions of UUIDs.
When reloading a connection (update_connection(), previously), the loaded
connection for a certain path might actually replace another existing
connection. In this case, the old connection must be removed, and
the existing one updated instead.
If reloading a connection changes the UUID to a new value, the old
connection must be removed likewise and a new connection added.
Merge both functions into update_connection().
