`use_carrier` is removed from kernel since 6.18 [1], and returns
the following error if set to 0:
> option obsolete, use_carrier cannot be disabled
This causes a failure of test-link-linux, so let's set it to 1.
[1] https://lore.kernel.org/all/2029487.1756512517@famine/
Fix the following error seen when running the build_clean.sh script
with LTO disabled:
In file included from ../src/libnm-glib-aux/nm-default-glib.h:66,
from ../src/libnm-glib-aux/nm-default-glib-i18n-prog.h:13,
from ../src/core/nm-default-daemon.h:11,
from ../src/core/platform/tests/test-link.c:6:
In function ‘_nm_auto_freev’,
inlined from ‘test_link_get_bridge_fdb’ at ../src/core/platform/tests/test-link.c:2732:33:
../src/libnm-glib-aux/nm-macros-internal.h:166:8: error: ‘addrs’ may be used uninitialized [-Werror=maybe-uninitialized]
166 | if (*p) {
| ^
../src/core/platform/tests/test-link.c: In function ‘test_link_get_bridge_fdb’:
../src/core/platform/tests/test-link.c:2732:33: note: ‘addrs’ was declared here
2732 | nm_auto_freev NMEtherAddr **addrs;
| ^~~~~
cc1: all warnings being treated as errors
Fixes: 16ef33d380 ('bond-slb: fix memory leak')
If sendto() fails, the function returns and the remaining entries are
not deallocated. Use nm_auto_freev instead to free the array and the
pointer it contains.
Add a test to check that nm_auto_freev does the right thing on the
value returned by nm_linux_platform_get_bridge_fdb().
Fixes: 3f2f922dd9 ('bonding: send ARP announcement on bonding-slb link/carrier down')
We're going to replace most of the ioctl-based ethtool functions with
a netlink-based equivalent. Move the ioctl ones to a separate file so
that it's easier to see what still needs to be converted. Also add a
common prefix to the function names.
iproute2 and the kernel accept 0 as valid rto_min value:
# ip route add 172.16.0.1 dev enp1s0 rto_min 0ms
# ip route show
172.16.0.1 dev enp1s0 scope link rto_min lock 0ms
Even if a value of 0ms would not be useful in practice, it is better
to exactly track what kernel reports, instead of assuming that when
the value is zero it is "not set".
When doing reapply on linux bridge interface, NetworkManager will reset
the VLAN filtering and default PVID which cause PVID been readded to all
bridge ports regardless they are managed by NetworkManager.
This is because Linux kernel will re-add PVID to bridge port upon the
changes of bridge default-pvid value.
To fix the issue, this patch introduce netlink parsing code for
`vlan_filtering` and `default_pvid` of NMPlatformLnkBridge, and use that
to compare desired VLAN filtering settings, skip the reset of VLAN
filter if `default_pvid` and `vlan_filtering` are unchanged.
Signed-off-by: Gris Ge <fge@redhat.com>
(cherry picked from commit 02c34d538c)
This option was only introduced only to allow keeping the old behavior
in RHEL7, while the default order was changed from 'ifindex' to 'name'
in RHEL8. The usefulness of this option is questionable, as 'name'
together with predictable interface names should give predictable order.
When not using predictable interface names, the name is unpredictable
but so is the ifindex.
https://issues.redhat.com/browse/NMT-926https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1814
sysfs is deprecated and kernel will not add new bridge port options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
Rename the variables and function name to use conscious language. In
addition, rename `type` and `link_type` variables to `port_type` and
`controller_type` to make it more intuitive.
When configuring the bridge port options the code was checking on port
link type instead of controller link type. In addition, the test is now
being skipped for nm-fake-platform.
The macro uses g_alloca(). Using alloca() is potentially dangerous. For
example, it must never be used in an unbounded loop. This should be
immediately obvious from the name, so we don't accidentally use them
in the wrong context.
All other alloca() macros should have such a prefix already. And they
always have to be macros, because you couldn't use alloca() to return
memory from a function.
sysfs is deprecated and kernel will not add new bond port options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
Older versions of iproute2 don't support the "enclimit" argument. Work
around that from the unit tests.
Fixes: 1505ca3626 ('platform/tests: ip6gre & ip6gretap test cases (ip6 tunnel flags)')
If the automatically selected channel for an AP is set as NO-IR in the
current regulatory domain, the hotspot connection will fail to
start. NO-IR means that any mechanisms that initiate radiation are not
permitted on this channel, this includes sending probe requests or
modes of operation that require beaconing such as AP. Skip channels
with the NO-IR flag.
The compiler may dislike this:
CC src/core/platform/tests/libNetworkManagerTest_la-test-common.lo
In function '_ip_address_add',
inlined from 'nmtstp_ip4_address_add' at ../src/core/platform/tests/test-common.c:1892:5:
../src/core/platform/tests/test-common.c:1807:63: error: array subscript 'NMIPAddr {aka const struct _NMIPAddr}[0]' is partly outside array bounds of 'in_addr_t[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds]
1807 | peer_address->addr4,
| ~~~~~~~~~~~~^~~~~~~
../src/core/platform/tests/test-common.c: In function 'nmtstp_ip4_address_add':
../src/core/platform/tests/test-common.c:1886:36: note: object 'peer_address' of size 4
1886 | in_addr_t peer_address,
| ~~~~~~~~~~~~^~~~~~~~~~~~
...
Fixes: 06aafabf14 ('platform/test: add test adding IPv4 addresses that only differ by their peer-address')
The link object is no longer valid after the cache gets updated in
nm_platform_link_change().
Fixes: e02fd76d9f ('platform: support changing link properties')
The tests failed in certain cases on gitlab-ci and were temporarily
disabled.
These issues should be fixed now and the test pass. Reenable.
(cherry picked from commit 5c324adc7c)
Certain ip-tunnel modules automatically create network interfaces (for
example, "ip_gre" module creates "gre0" and others).
Btw, that's not the same as `modprobe bonding max_bonds=1`, where
loading the module merely automatically creates a "bond0" interface. In
case of ip tunnel modules, these generated interfaces seem essential to
how the tunnel works, for example they cannot be deleted. I don't
understand the purpose of those interfaces, but they seem not just
regular tunnel interfaces (unlike, "bond0" which is a regular bond
interface, albeit automatically created).
Btw, if at the time when loading the module, an interface with such name
already exists, it will bump the name (for example, adding a "gre1"
interfaces, and so on). That adds to the ugliness of the whole thing,
but for our unit tests, that is no problem. Our unit tests run in a
separate netns, and we don't create conflicting interfaces. That is, an
interface named "gre0" is always the special tunnel interface and we
can/do rely on that.
Note that when the kernel module gets loaded, it adds those interfaces
to all netns. Thus, even if "test-route-linux" does not do anything with
ip tunnels, such an interface can always appear in a netns, simply by
running "test-link-linux" (or any other tool that creates a tunnel) in
parallel or even in another container.
Theoretically, we could just ensure that we load all the conflicting
ip-tunnel modules (with nmtstp_ensure_module()). There there are two
problems. First, there might be other tunnel modules that interfere but
are not covered by nmtstp_ensure_module(). Second, when kernel creates
those interfaces, it does not send correct RTM_NEWLINK notifications (a
bug), so our platform cache will not be correct, and
nmtstp_assert_platform() will fail.
The only solution is to detect and ignore those interfaces. Also,
ignore all interfaces of link-type "unknown". Those might be from other
modules that we don't know about and that exhibit the same problem.
(cherry picked from commit e99433866d)
Ubuntu 18.04 comes with iproute2-4.15.0-2ubuntu1.3. The
"/etc/iproute2/rt_protos" file from that version does not yet support
the "bgp" entry. Also the "babel" entry is only from 2014. Just choose
other entries. The point is that NetworkManager would ignore those, and
that applies to "zebra" and "bird" alike.
(cherry picked from commit 26592ebfe5)
This will make sure that the IP tunnel module is loaded. It does so by
creating (and deleting) a tunnel interface.
That is important, because those modules will create additional interfaces
that show up in `ip link` (like "gre0"), and those interfaces can interfere
with the tests.
Also add nmtstp_link_is_iptunnel_special() to detect whether an
interface is one of those special interfaces.
(cherry picked from commit 451cedf2bf)
Obviously, it would be nice if our unit tests are fast. However, with
valgrind and a busy machine, some of the tests can take a relatively
long time. In particular those, that are marked as "slow" (if you want
to skip them during development, do so via "NMTST_DEBUG=quick"
environment, or "CFLAGS=-DNMTST_TEST_QUICK=TRUE", see
"nm-test-utils.h").
Anyway. Our tests almost never hit the timeout, and if they do, the most
likely reason is that something was just slower then expected, and the
timeout is a bogus error.
Timeouts only act as last fail safe. It more important to avoid a false
(premature) timeout failure, than to minimize the wait time when the
test really hangs. Because a real hang is a bug anyway, that we will
discover and need to fix.
Increase the default test timeout for meson tests to 3 minutes.
Also, "test-route-linux" is known to take a long time. Increase that
timeout even further.
(cherry picked from commit 9ee42c0979)
