deactivate_quickly is misnamed these days; it was originally used
for quickly tearing down a device for sleep and such. But these
days it's used for the bulk of device deactivation. Only the wifi
class used the actual deactivate method. So combine the two and
make device implementations less complicated.
Given connection details, complete the connection as well as possible
using the given specific object and device, add it to system
settings, and activate it all in one method.
Otherwise it doesn't auto-scan and we get no network list. As a later
optimization, we could detect this, call iwmx_sdk_get_connected_network()
to get the current NSP, match that up with a connection, and "assume"
the connection like we do for Ethernet devices.
Instead of a bizare mechanism of signals back to the manager
object that used to be required because of the user/system settings
split, let each place that needs secrets request those secrets
itself. This flattens the secrets request process a ton and
the code flow significantly.
Previously the get secrets flow was something like this:
nm_act_request_get_secrets ()
nm_secrets_provider_interface_get_secrets ()
emits manager-get-secrets signal
provider_get_secerts ()
system_get_secrets ()
system_get_secrets_idle_cb ()
nm_sysconfig_connection_get_secrets ()
system_get_secrets_reply_cb ()
nm_secrets_provider_interface_get_secrets_result ()
signal failure or success
now instead we do something like this:
nm_agent_manager_get_secrets ()
nm_agent_manager_get_secrets ()
request_start_secrets ()
nm_sysconfig_connection_get_secrets ()
return failure or success to callback
Previously, NM reset permanent MAC to an interface while disconnecting. That
basically ignored MAC addresses set before NM started managing the interface.
Now, the initial MAC address is remembered and set back to the interface when
disconnecting.
This commit implements MAC cloning feature in NetworkManager. To support that,
'PermHwAddress' property is added into *.Device.Wired and *.Device.Wireless
interfaces. The permanent MAC address is obtained when creating the device, and
is used for 'locking' connections to the device. If a cloned MAC is specified
in connection to be activated, the MAC is set to the interface in stage1. While
disconecting, the permanent MAC is set back to the interface.
Where we can do so, let's use ifindex since that's actually unique
and doesn't change when the interface name changes. We already use
ifindex in a bunch of places, and netlink *only* uses ifindex, so
this will make it easier later when we move over to ifindexes fully.
nm_device_set_use_dhcp() and nm_device_get_use_dhcp() were somewhat
confusing and don't really reflect the new DHCP architecture with
NMDHCPClient. Now that timeout and state signals are specific to
the NMDHCPClient it doesn't make sense to check for DHCP use
in the callbacks for those signals since they'll never get called
if DHCP isn't in use. We might as well just keep the DHCP manager
around and check whether a DHCP client instance exists when we need
to figure out whether DHCP is in use.
In the past networkmanager did not allow to manually disconnect devices.
Manually disconnected devices will not be automatically reconnected until one
of the following events occur:
1. user activates a connection for the currently disconnected device
2. network manager awakes from hibernate/suspend
3. network manager is restarted (e.g. reboot)
Add a Disconnect method to generic NMDevice dbus interface; set a new private
autoconnect_inhibit flag if Disconnect method is called through dbus.
Based on this auto activation for devices gets inhibited until one
of the above events occur.
This allows a device (or a companion) to signal that it is not a good
time for a specific device to autoconnect to a network.
The OLPC mesh device will use this to prevent automatic connection
to WLAN networks while the mesh device is active.
The only thing that doesn't work yet is the system-settings service's
"auto eth" connections for ethernet devices that don't have an existing
connection. Might also have issues with unmanaged devices that can't
provide a MAC address until they are brought up, but we'll see.
Fix deletion of VPN gateway route on DHCP renew (bgo #558133)
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_ip4_route): return the route that was added
- (nm_system_add_ip4_vpn_gateway_route): make add_vpn_gateway_route()
public, clean up, and return the route that was added
- (nm_system_apply_ip4_config): remove VPN related stuff to simplify,
since nm_system_add_ip4_vpn_gateway_route() is now available; add
flags to allow only certain attributes of the NMIP4Config to be
applied
* src/nm-device.c
- (handle_dhcp_lease_change): don't touch the DHCP4 config on failure
- (nm_device_set_ip4_config): use nm_ip4_config_diff() to only apply
what's really changed between the old and new configs; don't export
the new IP4 config on failure; always send the DNS info to the
named manager
* src/vpn-manager/nm-vpn-connection.c
- (device_ip4_config_changed, nm_vpn_connection_new, dispose): track the
parent device's IP4Config and re-add the VPN gateway route when it
changes
- (nm_vpn_connection_ip4_config_get): add the VPN gateway route (since
nm_system_apply_ip4_config() no longer does) and cache it for later
- (connection_state_changed): move cleanup code to its own function
- (vpn_cleanup): delete any previously added VPN gateway route; and
re-apply the parent device's addresses and routes using
nm_system_apply_ip4_config(), not nm_device_set_ip4_config()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4277 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
include/NetworkManagerVPN.h
- Add a few more state reasons for the device deactivated state
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_deactivate): add a 'reason' argument
* src/nm-device.c
src/nm-device.h
- (nm_device_deactivate, nm_device_take_down): add a 'reason' argument
- (nm_device_state_changed): pass the state change reason to
nm_device_take_down()
- (nm_device_set_managed): take a 'reason' argument, and pass it along
to the state change function
* src/nm-manager.c
src/nm-manager.h
- (remove_one_device, handle_unmanaged_devices, sync_devices,
impl_manager_sleep): pass a reason code to nm_device_set_managed()
- (nm_manager_deactivate_connection): add a 'reason' argument and pass
something reasonable along to VPN deactivation
* src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-manager.h
- (nm_vpn_manager_deactivate_connection): add a 'reason' argument and
pass that along to nm_vpn_connection_disconnect()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4174 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c (nm_device_get_priority): Implement.
(nm_device_set_ip4_config): Send the device priority to system ip4
config setter.
* src/NetworkManagerSystem.c (nm_system_device_set_from_ip4_config):
Add priority argument and if it's >= 0, set the priority of the network
route added automatically by netlink (or kernel?).
(nm_system_device_set_priority): Implement.
* src/NetworkManagerPolicy.c (get_best_device): Use
nm_device_get_priority() instead of home-grown version. Revert the
meaning, best priority is the lowest one.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement support for honoring configured and automatic hostnames, and for
setting the configured hostname.
* introspection/nm-ip4-config.xml
src/nm-ip4-config.c
src/nm-ip4-config.h
src/dhcp-manager/nm-dhcp-manager.c
- Remove useless hostname property; it's not really part of the IPv4
config
* introspection/nm-settings-system.xml
libnm-glib/nm-dbus-settings-system.c
libnm-glib/nm-dbus-settings-system.h
- Add SetHostname() call to system settings D-Bus interface
- Add Hostname property to system settings D-Bus interface
- (nm_dbus_settings_system_save_hostname,
nm_dbus_settings_system_get_hostname): implement
* src/nm-device.c
src/nm-device.h
- (nm_device_get_dhcp4_config): implement
* src/nm-manager.c
src/nm-manager.h
- Fetch and track system settings service hostname changes, and proxy
the changes via a GObject property of the manager
* system-settings/src/nm-system-config-interface.c
system-settings/src/nm-system-config-interface.h
- Replace nm_system_config_interface_supports_add() with a capabilities
bitfield
* system-settings/src/nm-system-config-error.c
system-settings/src/nm-system-config-error.h
- Add additional errors
* system-settings/src/dbus-settings.c
system-settings/src/dbus-settings.h
- (get_property, nm_sysconfig_settings_class_init): add hostname
property; first plugin returning a hostname wins
- (impl_settings_add_connection): use plugin capabilities instead of
nm_system_config_interface_supports_add()
- (impl_settings_save_hostname): implement hostname saving
* src/NetworkManagerPolicy.c
- (lookup_thread_run_cb, lookup_thread_worker, lookup_thread_new,
lookup_thread_die): implement an asynchronous hostname lookup thread
which given an IPv4 address tries to look up the hostname for that
address with reverse DNS
- (get_best_device): split out best device code from
update_routing_and_dns()
- (update_etc_hosts): update /etc/hosts with the machine's new hostname
to preserve the 127.0.0.1 reverse mapping that so many things require
- (set_system_hostname): set a given hostname
- (update_system_hostname): implement hostname policy; a configured
hostname (from the system settings service) is used if available,
otherwise an automatically determined hostname from DHCP, VPN, etc.
If there was no automatically determined hostname, reverse DNS of
the best device's IP address will be used, and as a last resort the
hostname 'localhost.localdomain' is set.
- (update_routing_and_dns): use get_best_device(); update the system
hostname when the network config changes
- (hostname_changed): update system hostname if the system settings
service signals a hostname change
- (nm_policy_new): list for system settings service hostname changes
- (nm_policy_destroy): ensure that an in-progress hostname lookup thread
gets told to die
* system-settings/plugins/keyfile/plugin.c
system-settings/plugins/ifcfg-suse/plugin.c
- (get_property, sc_plugin_ifcfg_class_init): implement hostname and
capabilities properties
* system-settings/plugins/ifcfg-fedora/shvar.c
- (svOpenFile): re-enable R/W access of ifcfg files since the plugin
writes out /etc/sysconfig/network now
* system-settings/plugins/ifcfg-fedora/plugin.c
- (plugin_get_hostname): get hostname from /etc/sysconfig/network
- (plugin_set_hostname): save hostname to /etc/sysconfig/network
- (sc_network_changed_cb): handle changes to /etc/sysconfig/network
- (sc_plugin_ifcfg_init): monitor /etc/sysconfig/network for changes
- (get_property, set_property, sc_plugin_ifcfg_class_init): implement
hostname get/set and capabilities get
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4077 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
- Add a "missing firmware" device state reason
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_up_down): add a no_firmware argument
- (nm_system_device_set_up_down_with_iface): if the result of setting
IFF_UP is ENOENT, that almost always means missing firmware
* src/backends/NetworkManagerGeneric.c
src/nm-device-ethernet.c
src/nm-device-private.h
src/nm-device-wifi.c
src/nm-device.c
src/nm-device.h
src/nm-hso-gsm-device.c
src/vpn-manager/nm-vpn-connection.c
- Pass no_firmware along; check it where appropriate
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3983 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Modify the NMDevice::state-changed signal to include the previous state
and reason. Enables the applet to provide more information why device
activation failed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3819 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix mobile broadband username/password issues. NM was never requesting
mobile broadband secrets, nor was it passing back the username and password
if it had them.
* marshallers/nm-marshal.list
- Add some new types for activation request objects
* src/nm-activation-request.c
src/nm-activation-request.h
- (get_secrets_cb): pass the caller type in the signal
- (nm_act_request_request_connection_secrets): take a caller type, so
that GetSecrets() reply handlers know who asked for the secrets in
the first place; use secret hints too so the settings service can
figure out exactly what NM wants (ie, PIN or the PPP password)
* src/ppp-manager/nm-ppp-manager.c
src/ppp-manager/nm-ppp-manager.h
- (impl_ppp_manager_need_secrets): nm_connection_need_secrets() won't
detect needed secrets when the secret could be blank, like GSM/CDMA
passwords. So always ask for secrets, and send a hint as to what
secret we really want.
- (nm_ppp_manager_update_secrets): make function more generic by making
the device specific class figure out the username and password, and
accept an error argument to return back over D-Bus
* src/nm-device-wifi.c
- (link_timeout_cb, handle_auth_or_fail): update for changes to
nm_act_request_request_connection_secrets()
- (real_connection_secrets_updated): update for 'caller' changes
* src/nm-device.c
src/nm-device.h
- (connection_secrets_updated_cb, connection_secrets_failed_cb): update
for 'caller' changes
* src/nm-device-ethernet.c
- (real_connection_secrets_updated): update for 'caller' changes and
move logic for getting PPPoE username and password here before
calling nm_ppp_manager_update_secrets()
- (link_timeout_cb, handle_auth_or_fail): update for changes to
nm_act_request_request_connection_secrets()
* src/nm-cdma-device.c
- (real_connection_secrets_updated): pass username and password back
to the PPP manager when required
* src/nm-gsm-device.c
- (enter_pin): send the required secret name to the settings service
- (real_connection_secrets_updated): pass username and password back
to the PPP manager when required
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3794 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix the device up/down ambiguities. Up/down state used to be a
conglomeration of hardware state (IFF_UP) and any device-specific things
(supplicant, periodic timers, etc) that the device used to indicate
readiness. Unfortunately, if the hardware was already IFF_UP for some
reason, then the device specific stuff wouldn't get run, and the device
would be stuck.
* src/nm-device.c
src/nm-device.h
- Create hw_is_up, hw_bring_up, and hw_take_down
- Rename bring_down -> take_down
- (real_hw_is_up): check interface flags for IFF_UP
- (nm_device_hw_is_up): let subclasses figure out their own HW state
- (nm_device_is_up): make static; only used locally
- (nm_device_hw_bring_up): update the hardware and IPv4 addresses even
if the device is already up; if the device isn't up, bring it up
- (nm_device_hw_take_down): just take down hardware
- (nm_device_bring_up): bring up HW first, then device specific stuff
- (nm_device_take_down): always deactivate device when called; always
try to take hardware down too
- (nm_device_state_changed): take device down when entering unmanaged
state from a higher state
* src/nm-device-802-11-wireless.c
- (real_hw_is_up, real_hw_bring_up, real_hw_take_down): implement; just
check IFF_UP really
- (real_take_down, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): fix some messages
* src/nm-device-802-3-ethernet.c
- (real_hw_is_up, real_hw_bring_up, real_hw_take_down): implement; just
check IFF_UP really
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3618 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Remove the DOWN and CANCELLED device states
- Add UNMANAGED and UNAVAILABLE device states
- Document the device states
* introspection/nm-device.xml
src/nm-device-interface.c
src/nm-device-interface.h
- Add the 'managed' property
* test/nm-tool.c
- (detail_device): print out device state
* src/NetworkManagerSystem.h
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerMandriva.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerSuSE.c
- (nm_system_device_get_system_config, nm_system_device_get_disabled
nm_system_device_free_system_config): remove; they were unused and
their functionality should be re-implemented in each distro's
system settings service plugin
* src/nm-gsm-device.c
src/nm-gsm-device.h
src/nm-cdma-device.c
src/nm-cdma-device.h
- (*_new): take the 'managed' argument
* src/nm-device.c
- (nm_device_set_address): remove, fold into nm_device_bring_up()
- (nm_device_init): start in unmanaged state, not disconnected
- (constructor): don't start device until the system settings service
has had a chance to figure out if the device is managed or not
- (nm_device_deactivate, nm_device_bring_up, nm_device_bring_down):
don't set device state here, let callers handle that as appropriate
- (nm_device_dispose): don't touch the device if it's not managed
- (set_property, get_property, nm_device_class_init): implement the
'managed' property
- (nm_device_state_changed): bring the device up if its now managed,
and deactivate it if it used to be active
- (nm_device_get_managed, nm_device_set_managed): do the right thing
with the managed state
* src/nm-hal-manager.c
- (wired_device_creator, wireless_device_creator, modem_device_creator):
take initial managed state and pass it along to device constructors
- (create_device_and_add_to_list): get managed state and pass to
type creators
* src/nm-device-802-11-wireless.c
- (real_can_activate): fold in most of
nm_device_802_11_wireless_can_activate()
- (can_scan): can't scan in UNAVAILABLE or UNMANAGED
- (link_timeout_cb): instead of deactivating, change device state and
let the device state handler to it
- (real_update_hw_address): clean up
- (state_changed_cb): when entering UNAVAILABLE state, schedule an idle
handler to transition to DISCONNECTED if the device isn't rfkilled
* src/nm-device-802-3-ethernet.c
- (set_carrier): move above callers and get rid of prototype
- (device_state_changed): when entering UNAVAILABLE state, schedule an
idle handler to transition to DISCONNECTED if the device has a
carrier
- (real_update_hw_address): clean up
- (link_timeout_cb, ppp_state_changed): change state instead of calling
deactivation directly as deactivation doesn't change state anymore
* src/NetworkManagerPolicy.c
- (schedule_activate_check): yay, remove wireless_enabled hack since
the NMManager and wireless devices work that out themselves now
- (device_state_changed): change to a switch and update for new device
states
- (device_carrier_changed): remove; device handles this now through
state changes
- (device_added): don't care about carrier any more; the initial
activation check will happen when the device transitions to
DISCONNECTED
* src/nm-manager.c
- (dispose): clear unmanaged devices
- (handle_unmanaged_devices): update unmanaged device list and toggle
the managed property on each device when needed
- (system_settings_properties_changed_cb): handle signals from the
system settings service
- (system_settings_get_unmanaged_devices_cb): handle callback from
getting the unmanaged device list method call
- (query_unmanaged_devices): ask the system settings service for its
list of unmanaged devices
- (nm_manager_name_owner_changed, initial_get_connections): get unmanaged
devices
- (manager_set_wireless_enabled): push rfkill state down to wireless
devices directly and let them handle the necessary state transitions
- (manager_device_state_changed): update for new device states
- (nm_manager_add_device): set initial rfkill state on wireless devices
- (nm_manager_remove_device): don't touch the device if it's unmanaged
- (nm_manager_activate_connection): return error if the device is
unmanaged
- (nm_manager_sleep): handle new device states correctly; don't change
the state of unavailable/unmanaged devices
* libnm-glib/nm-device-802-11-wireless.c
- (state_changed_cb): update for new device states
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Date: Mon Mar 17 12:27:01 2008 -0600
2008-03-17 Tambet Ingo <tambet@gmail.com>
Clean up activating device deactivation.
* src/nm-device.c (real_activation_cancel_handler): Remove. The same thing
should be done whether the device activation gets cancelled or the device
is just getting deactivated.
(nm_device_activation_cancel): Remove.
(nm_device_deactivate_quickly): Handle the case where device is activating.
* src/nm-device-802-11-wireless.c (real_activation_cancel_handler): Remove.
It does the exact same thing as real_deactivate_quickly().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3471 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Split the 802.1x bits out of the wireless-security setting so they are
generalized enough for wired 802.1x to use too.
* introspection/nm-exported-connection.xml
- GetSecrets now returns 'a{sa{sv}}' (a hash of settings hashes) instead
of just a hash of the secrets for one setting
* libnm-util/nm-setting-wireless-security.c
libnm-util/nm-setting-wireless-security.h
- Remove 802.1x-specific stuff
- Added leap-username and leap-password properties for old-school LEAP
* src/nm-device.c
src/nm-device.h
- (connection_secrets_updated_cb): take a list of updated settings names,
not just one
* src/supplicant-manager/nm-supplicant-config.c
src/supplicant-manager/nm-supplicant-config.h
- (nm_supplicant_config_add_setting_wireless_security): remove 802.1x
specific stuff; fix for updated LEAP bits; punt 802.1x stuff
to nm_supplicant_config_add_setting_8021x()
- (nm_supplicant_config_add_setting_8021x): add an 802-1x setting to
the supplicant config
* src/nm-device-802-11-wireless.c
- (build_supplicant_config): pass in the 802.1x setting too, if any
- (real_connection_secrets_updated): take a list of updated settings
names, not just one
* src/nm-device-802-3-ethernet.c
src/nm-cdma-device.c
src/nm-gsm-device.c
- (real_connection_secrets_updated_cb): take a list of updated settings
names, not just one
* src/nm-activation-request.c
src/nm-activation-request.h
- (nm_act_request_class_init): the 'connection-secrets-updated' signal
now passes a list of updated settings names, not just one
- (update_one_setting): new function; handle one updated setting
- (get_secrets_cb): handle multiple settings returned from the
settings service; have to be careful of ordering here as there are
some dependencies between settings (ex. wireless-security and 802.1x
in some cases)
* src/marshallers/nm-marshal.list
- new marshaller for connection-secrets-updated signal
* libnm-util/nm-setting-8021x.c
- Add back the 'pin' and 'psk' settings, for EAP-SIM and EAP-PSK auth
methods
- (verify): a valid 'eap' property is now required
* libnm-util/nm-connection.c
- (register_default_settings): add priorities to settings; there are
some dependencies between settings, and during the need_secrets
calls this priority needs to be respected. For example, only the
wireless-security setting knows whether or not the connection is
going to use 802.1x or now, so it must be asked for secrets before
any existing 802.1x setting is
- (nm_connection_lookup_setting_type): expose
* libnm-util/nm-setting-wireless.c
- (verify): should verify even if all_settings is NULL; otherwise won't
catch the case where there is missing security
* libnm-util/nm-setting-wireless-security.c
- Remove everything to do with 802.1x
- Add old-school LEAP specific properties for username and password
- (need_secrets): rework LEAP secrets checking
- (verify): rework for LEAP and 802.1x verification
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3470 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Move the 'carrier' property from NMDevice to NMDevice8023Ethernet;
convert the libnm-glib NMDevice8023Ethernet to cached properties
* introspection/nm-device-802-3-ethernet.xml
- New 'Carrier' property
- New 'PropertiesChanged' signal
* introspection/nm-device.xml
- Remove 'Carrier' property
- Remove 'CarrierChanged' signal
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_init): remove 'carrier' property and
'carrier-changed' signal
* src/nm-device.c
src/nm-device.h
- (nm_device_get_carrier, nm_device_set_carrier): remove
- (nm_device_activate_stage5_ip_config_commit): don't bother updating
the link here; wired device will handle that
- (handle_dhcp_lease_change): don't bother updating link here
- (get_property, nm_device_class_init): remove carrier property
* src/nm-device-802-11-wireless.c
- (real_update_link, nm_device_802_11_wireless_class_init): remove
real_update_link(); wireless devices don't use carrier at all
- (link_timeout_cb, supplicant_iface_state_cb_handler,
supplicant_iface_connection_state_cb_handler,
supplicant_mgr_state_cb_handler): remove anything to do with carrier
* src/nm-device-802-3-ethernet.c
src/nm-device-802-3-ethernet.h
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off, constructor): use set_carrier()
instead of nm_device_set_carrier()
- (device_state_changed): update link from sysfs on activation;
replaces real_update_link()
- (real_update_link): remove, replaced by device_state_changed()
- (nm_device_802_3_ethernet_get_carrier, set_carrier): new functions
- (nm_device_802_3_ethernet_get_speed): move up with other getters/setters
- (real_get_generic_capabilities, real_can_interrupt_activation): use
new get_carrier function
- (get_property): add 'carrier' property
- (nm_device_802_3_ethernet_class_init): add 'carrier' property and
hook into property-changed signal helper
* src/NetworkManagerPolicy.c
- (device_carrier_changed): will only ever be called with a wired device
- (device_added): only hook up to carrier-changed for wired devices
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- (constructor, nm_device_class_init): remove carrier-changed signal
- (device_carrier_changed_proxy): remove; unused
- (nm_device_get_carrier): remove; carrier a property of wired devices
* libnm-glib/nm-device-802-3-ethernet.c
libnm-glib/nm-device-802-3-ethernet.h
- Convert to cached properties like AP and Wireless objects
- (nm_device_802_3_ethernet_get_hw_address): now returns a 'const char *'
instead of a 'char *', return value should not be freed
- (nm_device_802_3_ethernet_get_carrier): return current carrier status
- (constructor): hook into properties-changed helper
- (set_property, get_property): new functions
- (nm_device_802_3_ethernet_class_init): export GObject properties
* test/nm-tool.c
- (detail_device): strdup the wired hardware address too since it's
cached now
* libnm-glib/libnm-glib-test.c
- (dump_wired): strdup the wired hardware address too since it's
cached now
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
First pass of multiple active device support. Expect bugs.
* src/nm-ip4-config.c
src/nm-ip4-config.h
- (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove;
there are better ways to do this in the named manager
* src/nm-device.c
src/nm-device.h
- (nm_device_can_activate): return whether the device can activate a
connection right now; taking into account things like carrier state
and rfkill state
- (nm_device_get_best_auto_connection): renamed from
nm_device_get_best_connection
- (real_act_stage4_get_ip4_config): MTU stuff is now handled in the
device subclasses themselves, so that each device can override the
MTU from it's NMSetting subclass if needed
- (nm_device_set_ip4_config): set MTU when setting up routes and stuff
in NetworkManagerSystem.c, not here
* src/named-manager/nm-named-manager.c
src/named-manager/nm-named-manager.h
- (nm_named_manager_name_owner_changed,
nm_named_manager_dbus_connection_changed): fix for changes to
rewrite_resolv_conf()
- (compute_nameservers): don't need the NMNamedManager at all, remove
from parameter list
- (merge_one_ip4_config): new function; merge ip4 configs together
- (rewrite_resolv_conf): write out resolv.conf from all the stored
ip4 configs; the VPN config takes precedence, then the best
device config, then the rest of the configs
- (get_domain_for_config): take the NMNamedManager as an argument
to check whether the config is the VPN config
- (add_ip4_config_to_named): fixups for removal of the 'secondary'
attribute from ip4 configs
- (add_all_ip4_configs_to_named): add all the configs in priority order
- (remove_ip4_config_from_named): fix for changes to
get_domain_for_config()
- (nm_named_manager_add_ip4_config): assign the config to the right slot
based on its type; callers must pass in the type now
- (get_last_default_domain): remove, unused
- (nm_named_manager_remove_ip4_config): handle config slots correctly
* src/nm-device-802-11-wireless.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): handle MTU override
* src/nm-device-802-3-ethernet.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): new function; handle MTU override
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary'
attribute on the ip4 config
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): remove
- (nm_policy_device_change_check): remove
- (update_default_route): new function; set the default route via
the specified device
- (get_device_priority): new function; return the priority number of
a device type WRT which one should have the default route. Order is
(highest to lowest) wired, wireless, GSM, CDMA.
- (update_routing_and_dns): new function; determine which device should
have the default route, then update the routing table and DNS
- (maybe_auto_activate_device): new function; if a device is now
available for activation, find out what connection it would like to
activate and do it
- (schedule_activate_check): new function; if a device can be activated
now, schedule the activation. Each device may have only one
pending activation at a given time.
- (device_state_changed): if activation was canceled, try again,
possibly with another connection; if the device was activated,
update routing and DNS; if the device was deactivated, try again
with another connection
- (device_carrier_changed): if there is no carrier, deactivate the
device; otherwise schedule an activation check for the device
- (wireless_networks_changed): schedule an activation check for the
device
- (device_added): keep track of the signal handler IDs so they can
be removed when the device goes away
- (device_removed): remove any signal handlers that might be attached
to the device; update routing and DNS
- (schedule_activate_all): new function
- (connections_added, connection_added, connection_updated): when
connections change, schedule all devices for an activation check
- (connection_removed): when a device is deactivated because its
connection was removed, schedule another activation check for it
- (nm_policy_destroy): destroy pending activations and disconnect
all device signal handlers
* src/nm-manager.c
- (nm_manager_activate_device): if the device was already actived,
deactivate it
- (deactivate_old_device): remove
- (connection_added_default_handler, impl_manager_activate_device):
don't deactivate other devices when activating this one
* src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerDebian.c
- (nm_system_get_mtu): remove; MTU should be provided through the
distro's system settings service plugin instead
- (nm_system_device_add_default_route_via_device): remove
- (nm_system_device_add_default_route_via_device_with_iface): remove
- (nm_system_device_replace_default_route): new function; call
generic implementation
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_device_add_default_route_via_device,
nm_generic_device_add_default_route_via_device_with_iface): remove
- (nm_generic_device_replace_default_route): replace the default route
with the given route via some gateway
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_from_ip4_config): let the policy handle updates
to routing and DNS; but set the MTU here
- (nm_system_vpn_device_set_from_ip4_config): set the route with the
ip_iface of the active device; use the standard MTU setting function
- (nm_system_set_mtu): remove
- (nm_system_device_set_mtu): consolidate MTU setting code in one place
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
src/nm-device.h
- (device_activation_precheck, check_connection_complete): remove this
virtual function; incomplete connections should be invalid by
definition, complete-ness should be checked in the setting's
verify function
* src/nm-serial-device.c
src/nm-gsm-device.c
- (real_check_connection_complete): remove
* libnm-util/nm-setting-serial.c
- (verify): new function; ensure there is a PPP setting too
* libnm-util/nm-setting-gsm.c
- (verify): ensure there is a serial setting too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3225 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_error_quark, nm_device_interface_error_get_type):
normalize and expand errors
- (nm_device_interface_init): register errors so they can be marshalled
through dbus-glib
- (nm_device_interface_activate): ensure that failure of activation
returns an error
* src/nm-device.c
src/nm-device.h
- (device_activation_precheck): implementations of check_connection()
now take a GError and must fill it in if the check fails. Return
more descriptive error if the requested connection is already
activating
- (nm_device_activate): actually try to return descriptive errors on
failures
* src/nm-device-802-11-wireless.c
src/nm-device-802-3-ethernet.c
src/nm-serial-device.c
src/nm-gsm-device.c
- (real_check_connection): return more descriptive errors on failure
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): print activation errors in the logs
* src/nm-manager.c
- (nm_manager_error_quark, nm_manager_error_get_type,
nm_manager_class_init): new errors
- (nm_manager_activate_device): handle errors
- (nm_manager_error_new): removed
- (wait_for_connection_expired, connection_added_default_handler,
impl_manager_activate_device): better error handling
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3197 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Change the
arguments: This whole file shouldn't really know anything about
NMDevices, it
should deal only with device interfaces. Devices might have
different ifaces for
different stuff and this place shouldn't know anything about it.
* src/NetworkManagerPolicy.c: Get rid of leftover global
* variable global_policy.
(global_state_changed): Implement. In the current NM it's not
really important,
but will be required in the case of multiple active devices. (Or
even better,
if stuff like that gets moved out from NM).
* src/vpn-manager/nm-vpn-connection.c
* (connection_state_changed): Don't call
nm_system_device_set_from_ip4_config() directly, use
nm_device_set_ip4_config()
instead.
* src/nm-device.c: Add a ip_face protected member. It's used for
* 'multi-interface'
devices like serial devices (ttyS0 and ppp0 for example).
(nm_device_get_ip_iface): Implement. Default to the device iface
if ip_iface is not
set.
(nm_device_set_ip_iface): Implement.
(nm_device_activate_stage5_ip_config_commit): Move all the extra
actions that happen
after setting ip4_config from here ...
(nm_device_set_ip4_config): ... to here. The reason behind it is
that no other code
than this function should call
nm_system_device_set_from_ip4_config() because no
other code has enough information on which arguments to use. So
instead, other code
could just set the new ip4 config using this function and
everyone is happy.
* src/nm-umts-device.c: Store the pending ids so that we can
* remove pending actions
if we happen to get deactivated while something is pending.
(automatic_registration): Handle the response that indicates
pending network
registration and wait until the pending registration is done.
(real_deactivate_quickly): If there's a pending operation,
cancel it.
* src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when
* the iface is up ...
(real_deactivate_quickly): ... and remove it when it's down.
(nm_serial_device_get_reply): Return the timeout id so that the
callers can remove
it if needed.
(nm_serial_device_wait_for_reply): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c (manager_device_state_changed): Listen to
* device' NEED_AUTH
state and try to get the secrets.
* src/NetworkManagerPolicy.c (nm_policy_auto_get_best_device):
* Get the list of
connections from NMManager and let the device to choose the best
from the list.
Since the connection list is sorted by system ones first and
user ones later,
the devices still prefer system connections like they did
before.
(deactivate_old_device): Implement. When a device starts
activation, we have a
policy (for now at least) to deactivate any other device that
might be either
active or still activating.
* src/vpn-manager/nm-vpn-manager.c: Add NMManager back to the
* private structure.
It's set on construction, there will be no other way to access
it.
* src/nm-device-802-11-wireless.c: Don't touch NMManager,
* NMManager can listen to
device events and drive the device, not the other way around.
* src/nm-device-802-3-ethernet.c: Ditto.
* src/nm-device.c (nm_device_get_best_connection): The
* connections list is now
sent along, pass it on to virtual functions.
* src/nm-device-interface.c (nm_device_interface_get_iface):
* Implement. It's static
for now, but should really be public instead of
nm_device_get_iface() since iface
is a property of the DeviceInterface, not Device.
(impl_device_activate): Don't touch NMManager!
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2889 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
