* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_add_network_address): if the network doesn't yet exist in
GConf, make a minimal entry for it (essid & timestamp)
* src/NetworkManagerAPList.c
- (nm_ap_list_populate_from_nmi): Don't try to grab network data if
NetworkManagerInfo isn't running
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nmi_is_running): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): Don't set the created AP's MAC
address to garbage.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): On successful activation, make sure
the "best" AP has a MAC address, and don't tell NMI to add the
current AP's MAC address to GConf if the AP is an Ad-hoc AP.
- (nm_policy_allowed_ap_list_update): Update a wireless card's "best"
access point after refreshing our allowed list if it doesn't already
have a "best" access point.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@400 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Check DBUS version in configure, and set the C macros
DBUS_VERSION_[MAJOR,MINOR,MICRO]
* info-daemon/NetworkManagerInfoDbus.c
- Remove #if 0-d section of code that quit NMI if NM went away.
* panel-applet/NMWirelessAppletDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
* src/NetworkManager.c
src/NetworkManagerMain.h
src/NetworkManagerDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
- Make updating of our Allowed Wireless Network lists from NMI
an idle function in the main thread now, with a high priority.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@398 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm_glib/
- Client library for applications using glib
* configure.in
various Makefiles
- Split NM_CFLAGS and NM_LIBS into separate variables
like DBUS_*, HAL_* and GLIB_*
* src/NetworkManager.c
src/NetworkManagerMain.h
- (nm_schedule_status_signal_broadcast): at the earliest convenience,
broadcast a status changed signal over DBUS from the main thread.
Still unused anywhere for the moment.
Patch from j@bootlab.org
* panel_applet/NMWirelessAppletDbus.c
src/NetworkManagerDbus.c
- Correct INT32->UINT32 mistmatch between NM and the panel applet
for the "getMode" method call
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@368 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Use correct timeout value
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.c
- Consolidate communication between NM and NMI by doing only 1 dbus
method call to get Wireless Network info from NMI instead of 6
* src/NetworkManager.c
- Make sure to cancel activation when we receive a SIGTERM, otherwise
when we didn't have an AP to use, we'd wait for one forever without
quitting
* src/NetworkManagerDevice.c
- nm_device_activation_cancel(): Fix a race between dhcp and quitting
activation, dhcp might not have started yet but we don't quit activation
before starting it, so the quit signal gets lost
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@363 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Suck in gcc warnings code from Rhythmbox,
but use fewer default flags, and in particular add -Wno-unused,
since the codebase has a lot of unused variables.
* test/nmtestdevices.c (create_device):
* test/nminfotest.c (get_network_string_property)
(get_networks_of_type):
* test/nmclienttest.c (main):
* src/NetworkManagerDbus.c (nm_dbus_create_error_message):
* initscript/NMLaunchHelper.c (get_nm_status):
* info-daemon/NetworkManagerInfoPassphraseDialog.c (update_button_cb):
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_create_error_message):
Fix declarations after statements.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@331 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_return_vpn_password): New method.
(nmi_dbus_get_vpn_userpass): New method.
(nmi_dbus_nmi_message_handler): Invoke it.
* info-daemon/NetworkManagerInfoDbus.h (nmi_dbus_return_vpn_password): Prototype.
* info-daemon/NetworkManagerInfoVPN.h,
info-daemon/NetworkManagerInfoVPN.c: New files; responds
to requests for VPN passwords.
* configure.in (GNOME_KEYRING_LIBS): Check for gnome-keyring.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@329 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache access point MAC addresses in NetworkManagerInfo after you've explicitly
connected to them. Then, after a scan, match up non-ESSID-broadcasting access
points with any cached MAC addresses from NetworkManagerInfo. Allows us to
show known access points that don't broadcast their ESSID in the menus without
any user intervention whatsoever.
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_get_network_addresses, nmi_dbus_add_network_address): new functions
for dbus method calls "getNetworkAddresses" and "addNetworkAddress"
* src/NetworkManagerAP.[ch]
- Add a "user_addresses" data member to the NMAccessPoint structure
- (nm_ap_get_user_addresses, nm_ap_set_user_addresses): new functions for accessing
the user_addresses data member
* src/NetworkManagerAPList.c
- (nm_ap_list_get_ap_by_address): check user_addresses list too, instead of just
the AP's reported address
- (nm_ap_list_update_network): grab the user_addresses list from NetworkManagerInfo
* src/NetworkManagerDHCP.c
- Increase DHCP timeout from 25s -> 30s
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_network_addresses, nm_dbus_add_network_address): have NMI get/set
user addresses
* src/NetworkManagerDevice.c
- (nm_device_set_wireless_config): bring down the interface, wait 4s, bring it up,
wait 2s, then configure it. Sometimes Prism54 cards will freeze up with
"mgnt tx queue full", seemingly in response to NM controlling the card too much.
So, we take the card down to clear it out.
- (nm_device_do_normal_scan): Copy over AP ESSIDs from the allowed access point list
too, since that's where the user_addresses are
* src/NetworkManagerPolicy.c
- (nm_state_modification_monitor): Tell NMI to add an AP's hardware address to
that wireless networks' user_addresses list upon successful activation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@319 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_service_init): Delete
call to nmi_dbus_is_running too, not necessary anymore.
* info-daemon/NetworkManagerInfoDbus.c: Include stdlib.h to
pick up exit().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@306 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_is_running):
Delete.
(nmi_dbus_service_init): Call dbus_bus_acquire_service with
the DBUS_SERVICE_FLAG_PROHIBIT_REPLACEMENT flag, and
then check the result for DBUS_SERVICE_REPLY_SERVICE_EXISTS.
This avoids a race condition that made it pretty easily
possible to get two NetworkManagerInfo daemons running.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@305 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches from j bootlab org
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): wait 5 seconds before attempting to detect
whether the card has a link or not, some cards are slow
- (nm_device_activation_configure_ip): make ipv6 work a bit better
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- Disable the "Login" button on the passphrase dialog until the user
enters a valid passphrase or key
Patches from Tom Parker <palfrey tevp net>
* src/backends/NetworkManagerDebian.c
- Add static IP support to the debian backend
* src/backends/interface_parser.[ch]
- Parse debian interface config files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@303 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.[ch]
src/NetworkManagerDevice.c
- Keep track of the # of attempts to get the WEP key
from the user and pass that along to the info daemon
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@297 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletOtherNetworkDialog.c,
- Disable OK button until valid data is entered
for encryption stuff too
* panel-applet/NMWirelessApplet.c
- Report card strength for current AP if the card
doesn't report strength data for scanned access
points
* src/NetworkManagerDevice.c
- Smooth out cards reported quality, Atmel card was
intermittently reporting no quality data but soon
recovers
* src/NetworkManagerWireless.c
- Better quality data percentage calculation. Atmel
cards (mine at least) seem to report the quality
in percentage format already, so honor that
Patch from <j@bootlab.org>
* NetworkManager.h
info-daemon/NetworkManagerInfoPassphraseDialog.c
info-daemon/passphrase.glade
panel-applet/NMWirelessAppletOtherNetworkDialog.c
panel-applet/essid.glade
src/NetworkManagerAP.c
src/NetworkManagerDevice.c
src/NetworkManagerWireless.[ch]
- Support ASCII WEP keys, in both 40/64 bit and 104/128 bit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@291 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoPassphraseDialog.c
panel-applet/NMWirelessApplet.c
- Properly escape gconf keys
* src/NetworkManager.c
- remove unused variables
* src/NetworkManagerAP.c
- (nm_ap_new_from_ap): Don't redundantly set new APs
refcount since it got set in nm_ap_new()
* src/NetworkManagerAPList.c
- (nm_ap_list_combine): Give up ownership of newly created
access points to the ap list, fixes memleak
* src/NetworkManagerDevice.c
- Remove cached_ap_list4 member since its not really needed
- (nm_device_wireless_network_exists): Try to get correct
encryption status of a found AP if its already in our
device list
- (nm_device_do_normal_scan): Clean up scanning a bit, make
memory allocs/deallocs a bit clearer and shorter-lived
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@275 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_is_running): New function for determining if nmi is already running
- (nmi_dbus_service_init): exit if another instance of nmi is already running
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@273 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Trap the "DeviceActivationFailed" signal
* docs/NetworkManager DBUS API.txt
- Add "DeviceActivationFailed" signal
* panel-applet/NMWirelessAppletDbus.c
- Quash the "NetworkManager service not available" message
* src/NetworkManagerDbus.[ch]
- Add the "DeviceActivationFailed" signal
* src/NetworkManagerDevice.c
- Add support for activation_failed flag
- Fix deadlock where activation thread didn't clean itself up, making
main thread still believe it was alive forever (didn't reset activation
flags like activating, just_activated, etc when IP configuration
failed)
* src/NetworkManagerPolicy.c
- Implement logic for DeviceActivationFailed signal, and when activation fails
for wireless networks, try to fall back to some other access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@268 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Display name of network in the "network not found" dialog
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_call_nm_method): new function replaces all other
nmwa_dbus_get_[string|string_array|int|boolean] methods
- nmwa_dbus_get_network_name() and nmwa_dbus_get_device_name()
consolidated into nmwa_dbus_get_object_name()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@254 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c
info-daemon/NetworkManagerInfoDbus.c
- Display an error dialog when the user tries to use an
"Other wireless network" that's not found.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@250 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c (nmi_spawn_notification_icon): Stop respawning
if the notification icon crashes 5 times within 5 seconds of each respawn
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@221 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NWManagerInfo.h
- (struct NetworkManagerInfo): add shutdown_timeout GSource
* info-daemon/NWManagerInfoDbus.c
- (shutdown_callback): new function
- (nmi_dbus_filter): Create a 30 second timeout until shutdown
if NetworkManager goes away. Kill the timeout
if NetworkManager restarts before the 30 seconds
are up.
- (nmi_dbus_service_init):
- call gtk_main_quit if NetworkManager is not running
- add filters to monitor dbus service creations and
deletions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@204 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_update_state): Hide notification icon if we are only
showing one wired card and no wireless interfaces
(Red Hat Bug #134895)
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_filter): changed exit to gtk_main_quit ()
* panel-applet/NWManagerInfo.c
- (main): Terminated the notification_icon_cmd array with a NULL
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@202 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.[ch]
info-dameon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.[ch]
- Preserve original label text in the passphrase dialog so that
it actually gets updated with the new network name the next
time around. Previously, we were overwriting it so you'd get
the wrong network name to enter a key for
- Add a "Key Type" combo to the passphrase dialog, user selects
encryption key type now, type is stored in GConf too
- Adjust NM<->NMI DBUS protocol to pass the key type back to NM too
* src/NetworkManagerAP.[ch]
- Remove all the encyption method magic. It's now set by the user
and NetworkManager retrieves the type of encryption key from
NetworkManagerInfo
* src/NetworkManagerAPList.[ch]
src/NetworkManagerDbus.[ch]
- Adjust to new way of setting encryption key and method
- Pull encryption method down from NMI along with key
* src/NetworkManagerDevice.[ch]
- Removed encryption method fallback magic as the method is now
determined by the user. This greatly simplifies the connection
logic.
- More robust connection/link logic. Besides removing the encryption
method fallback magic, check whether or not the card is receiving
invalidly encrypted packets, which usually indicates that we have
a bad WEP key set.
- Don't blindly forge ahead when DHCP fails (still not completely fixed)
* test/nminfotest.c
- Test out new "Key Type" stuff in the NMI passphrase dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@195 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- Add a slightly more robust method of determining if the WEP key
is correct or not, by checking the WEP-discarded packet count
on the card
* info-daemon/NetworkManagerInfo.c
- (nmi_gconf_notify_callback): Fix GConf essid escaping, should
un-escape values we pull out rather than escaping them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@189 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.c
test/nminfotest.c
- Escape ESSIDs in gconf
* src/NetworkManagerDevice.c
- Fix pseudo-scanning to use netowrk list from info daemon
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@182 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Add a temporary --enable-notification-icon. This
will prolly go away.
* info-daemon/Makefile.am:
* info-daemon/NetworkManagerInfo.c:
* info-daemon/NetworkManagerInfo.h: Use a notification icon.
* panel-applet/Makefile.am:
* panel-applet/NMWirelessApplet.c: Turn into a notification icon
* panel-applet/NMWirelessApplet.h:
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@180 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Changes from J5
* info-daemon/NetworkManagerInfo.conf: fixed own permissions
* info-daemon/NetworkManagerInfoDbus.c: added service name to
syslog output
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@176 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
- Created a more robust security policy for the DBus service
- everything is denied by default
- root can own and send to the service
- users logged in at the console can send to the service
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@159 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Update our state every second to get more responsive panel icon
- (nmwa_update_state): remove bogus applet->pix_state = PIX_WIRED that
was causing our marching ants status blips to never move when
looking for a wireless network
* src/NetworkManagerDevice.c
- (nm_device_activation_begin): return if activation has already begun
- (nm_device_do_normal_scan): merge WEP key and priority from the
trusted/preferred network into the device's access point when the
scan list is processed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@60 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- (nmi_passphrase_dialog_ok_clicked): when updating the wep key
for a network, set the essid as well since it may not exist yet
- (nmi_passphrase_dialog_init): don't star out the passphrase field,
since WEP keys/passphrases are long and prone to entry-error
* panel-applet/Makefile.am
panel-applet/wired.png
- Add (pulled from system-config-network temporarily)
* panel-applet/NMWirelessApplet.[ch]
- Show wired picture when a wired connection is used
- Rename wireless icon enums, adding WIRELESS
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): unset encryption before bringing
down the card and setting the essid
- (nm_device_activatin_worker): request a key from the user if the
AP we are connecting to is encrypted but we don't have a key
for it yet
- (nm_device_set_user_key_for_network): fix missing '== 0' for a
strcmp() that prevented a user-entered key from actually getting
used
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@58 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/passphrase.glade
- Set window title to " "
* panel-applet/Makefile.am
panel-applet/keyring.png
- Deliver to correct place
* panel-applet/NMWirelessApplet.[ch]
- Add comments
- Remove applet->have_active_device as its no longer used
- (nmwa_load_theme): load keyring.png too
- (error_dialog): remove
- (show_warning_dialog): subsume functionality of error dialog too
- (nmwa_destroy, nmwa_new): create and dispose of an application-wide GConfClient
- (nmwa_handle_network_choice): add to deal with user clicking on an item from
the networks menu
- (nmwa_menu_item_activated): GtkMenuItem "activate" signal handler
- (nmwa_button_clicked, nmwa_setup_widgets): create and populate the menu on startup
and when we get broadcasts of changed wireless access points only, not when the
user clicks on the button to display the menu (too long of a wait)
- (nmwa_add_menu_item): Make active network bold, and place a keyring icon beside
networks that are encrypted
- (nmwa_dispose_menu, nmwa_menu_item_data_free): dispose of the data we place on each
menu item with g_object_set_data()
* panel-applet/NMWirelessAppletDbus.[ch]
- (nmwa_dbus_get_bool): add method to return boolean value from dbus message
- (nmwa_dbus_get_active_network): add (nmwa_dbus_get_string() wrapper to get active network)
- (nmwa_dbus_add_networks_to_menu): clean up, only show one instance of each ESSID in the menu
- (nmwa_dbus_set_network): force NetworkManager to use a particular network for wireless cards
- (nmwa_dbus_init, nmwa_dbus_filter): Trap network appear/disappear and device
activation/deactivation signals and rebuild the menu when they happen
* src/NetworkManager.c
- (main): use new nm_spawn_process() rather than system()
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): don't compare AP structure addresses directly, but essids
instead. Since we can now force best_aps to stick around, the AP structure to which
dev->options.wireless.best_ap points to won't necessarily be in the device's device list
if a scan has happened since the best_ap was frozen. Also add "setNetwork" method
to freeze the best_ap.
* src/NetworkManagerDevice.[ch]
- (nm_device_activation_worker): Use new nm_spawn_process() call rather than system()
- (nm_device_*_best_ap): add freeze/unfreeze/get_frozen functions, and don't really update
the best_ap in nm_device_update_best_ap() if the best_ap is frozen AND in the device's
ap list
* src/NetworkManagerUtils.[ch]
- (nm_spawn_process): add replacement for system() usage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@48 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
