* panel-applet/NMWirelessApplet.[ch]
panel-applet/NMWirelessAppletDbus.[ch]
- Move to incremental network updates. Instead of blowing away our list
of devices every time we get a signal from NetworkManager, we now
incrementally add/remove networks when NetworkManager notifies us that
a new network has appeared or disappered. Strength updates now happen
on-the-fly for each access point as well. There are now two copies of
data from NetworkManager: one for the dbus side, and one for the gui side.
When the dbus side data is modified, it is copied over to the gui side
so we don't have to hold the data_mutex for long periods of time (and
therefore block animation of the applet's icon).
- Clean up some memleaks too
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Minor code beautification
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): return whether or not the access point is
completely new and whether or not an existing one's strength was updated.
Try to fix multiple access points and signal strength by using the highest
signal strength in each scan for any given ESSID.
* src/NetworkManagerDbus.[ch]
- (nm_dbus_signal_wireless_network_change): consolidate signals that deal with
wireless networks; now we have only WirelessNetworkUpdate which includes
a UINT32 for Appeared, Disappeared, or StrengthChanged (see NetworkManager.h).
- Kill usage of DbusMessageIter
* src/NetworkManagerDevice.c
- (nm_device_wireless_process_scan_results): Use the same timestamp for all APs
in the same scan result list. Copy ESSIDs-by-address earlier on, for each
AP rather than all-at-once. Also don't ever remove the AP a card is
currently associated with from the network list.
- Update for new signals during scan, send out Appeared, Disappeared, or
StrengthChanged when necessary.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@477 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDHCP.[ch]
- (nm_device_dhcp_remove_timeouts): new function
* src/NetworkManagerDevice.c
- Use nm_device_dhcp_remove_timeouts() everywhere that we need to
remove the DHCP timeouts.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@466 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/essid.glade
panel-applet/NMWirelessAppletOtherNetworksDialog.c
- Correct spelling of "adaptor"->"adapter"
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/NMWirelessApplet.c: Use GTK_CHECK_VERSION() macro.
(nmwa_about_cb): Use standard copyright string. Update comment
text to reflect that it is a notification area applet. Remove
leading newline in authors list.
(nmwa_menu_show_cb, nmwa_setup_widgets): Populate menu on show
instead of on parent menu item activation. Fixes#167550.
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/essid.glade: Capitalize items as per HIG.
Fixes#167632
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@458 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dave Woodhouse for IPv6:
* src/NetworkManagerUtils.c
- (nm_ethernet_address_is_valid): Check for prism54 dummy MAC address
and multicast addresses
* src/NetworkManagerDevice.c
- (nm_device_set_up_down): make sure our cached MAC address is up-to-date
after bringing up a card.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@435 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dave Woodhouse:
* src/NetworkManagerSystem.h
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- New nm_system_device_add_ip6_link_address() function to add link-local
address on an interface. Stubbed in Debian, Gentoo, and Slackware.
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_add_ip6_link_address): implement
- (nm_system_device_flush_addresses): revert to previous behavior of
flushing all addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@432 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker:
* src/NetworkManagerDevice.c
- Remove the "#include <pci/types.h>" since both the ethtool.h and
mii.h headers are broken, and instead use our own typedefs
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@430 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Clean up usage of GSList objects and looping through their members
* Clean up DHCP rebind/renew timeouts, hopefully they will work correctly
now.
* Fix problem where even if scanning was turned off, card would still
cycle through frequencies.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@423 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Add a context menu that contains:
Pause/Resume Wireless Scanning
Stop/Start All Wireless Devices
About...
- Grab active device strength off active device,
not its network
* panel-applet/NMWirelessAppletDbus.[ch]
- Add DBUS accessors for "getSupportsCarrierDetect", "setScanningEnabled",
"getScanningEnabled", "setWirelessEnabled", and "getWirelessEnabled"
- Update active device strength every 2 seconds, not every 1 second
* panel-applet/menu-info.c
- Only disable wired devices in the menu when they support carrier detection,
and don't currently have a link. Non-carrier-detect devices will always
remain choosable
* src/Makefile.am
src/NetworkManagerDbusUtils.[ch]
- Add new new dbus utils sources
* src/NetworkManager.c
- Fixes for new link detection, we no longer need to call nm_device_update_link_active()
with the boolean parameter
- Set scanning_enabled & wireless_enabled to TRUE
* src/NetworkManagerDbus.c
- Use new dbus util method dispatcher functions for org.freedesktop.NetworkManager methods
- Implement scanning & wireless enable/disable calls
- Remove the dbus vtable unregister handlers, weren't doing anything with them anyway
* src/NetworkManagerDevice.c
- New link detection stuff again...
o Create device's mainloop earlier (but don't run it earlier)
o Hook up new carrier-detect support stuff
o Add in the ethtool & mii support detection code
- Don't scan if scanning is disabled
* src/NetworkManagerPolicy.c
- Never automatically choose a device that doesn't support carrier detection
- Don't automatically choose a wireless device if wireless is disabled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@416 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): merge strength too
* src/NetworkManagerUtils.c
- (nm_lock_mutex, nm_register_mutex_desc): new calls to facilitate debugging
of locking issues by printing out prettier information than g_mutex_lock
- Print out names of mutexes registered with nm_register_mutex_desc()
- (nm_try_lock_mutex): don't do the waiting thing when trying to lock, causes
us to seemingly block here for too long
* src/NetworkManager.c
src/NetworkManagerAPList.c
src/NetworkManagerDevice.c
- Convert to using nm_lock_mutex/nm_unlock_mutex rather than the glib variants
so we get better debug information printed
* src/NetworkManagerDbus.c
- (nm_dbus_devices_handle_request): reduce usage of nm_device_need_ap_switch()
since it sometimes has locking side effects
- (nm_device_get_association_pause_value): Reduce 802.11a card pause value to 8s
from 10s
- (nm_device_need_ap_switch): If we can't acquire the scan lock, return saying
we don't need a switch. This gets called often enough that we can't block
until the scan mutex is acquired, because we'll block on device activation
and a few other things, which hangs main thread for too long.
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): reduce the possiblity that
nm_device_need_ap_switch() will be called
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@407 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/RedHat/NetworkManager
- Don't spit out sysctl stuff to console
* libnm_glib/libnm_glib.c
- (libnm_glib_init): call dbus_g_thread_init()
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_worker): call dbus_g_thread_init()
* src/NetworkManager.c
- (main): call dbus_g_thread_init()
* src/NetworkManagerAPList.c
- (nm_ap_list_print_members): use LOG_ERR instead of LOG_DEBUG
so we can actually see what's there in a normal syslog
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): print out the "waiting for access point"
message only once, then say what access point we actually got after
the wait.
- (nm_device_need_ap_switch): If a scan is in progress when we're in this
function, wait until the scan is done. Scans may change the ESSID of
the card, making this function think we need to switch access points
- (nm_device_wireless_process_scan_results): for artificial access points
don't check against the card's ESSID, but the best_ap's ESSID. This
prevents collisions with the scanning code, which may change the card's
ESSID and cause the access point to get dropped from the device's AP
list. Also increase the keep-around time to 2m from 60s since the max
scan interval could be 60s in some cases.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Don't add invalid MAC addresses to GConf
- (nm_policy_allowed_ap_list_update): When we update, make sure we copy over
the new properties and ESSIDs to the device's AP list. Fixes some races
between NM and NMI.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@401 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_add_network_address): if the network doesn't yet exist in
GConf, make a minimal entry for it (essid & timestamp)
* src/NetworkManagerAPList.c
- (nm_ap_list_populate_from_nmi): Don't try to grab network data if
NetworkManagerInfo isn't running
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nmi_is_running): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): Don't set the created AP's MAC
address to garbage.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): On successful activation, make sure
the "best" AP has a MAC address, and don't tell NMI to add the
current AP's MAC address to GConf if the AP is an Ad-hoc AP.
- (nm_policy_allowed_ap_list_update): Update a wireless card's "best"
access point after refreshing our allowed list if it doesn't already
have a "best" access point.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@400 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
src/NetworkManagerDevicePrivate.h
- Block nm_device_new() until our device's worker thread has had a
chance to start up. Fixes a race between main thread and worker
thread starting that caused activation requests to get lost.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@396 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
panel-applet/NMWirelessAppletDbus.c
panel-applet/menu-info.c
src/NetworkManagerDevice.c
- Disable wired devices in the menu when they have no link.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@389 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Remove some debug messages
- Wrap others in #ifdef DEBUG/#endif
* src/NetworkManager.c
- Remove some debug messages
- Clarify some debug messages
- Remove code related to old single-thread wireless scanning
* src/NetworkManagerAP.[ch]
- New AP property "last_seen" to track how recently an AP was
found in a scan
- Start using 'const' more in function arguments
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_merge_scanned_ap): new, selectively update attributes
of an AP found in an AP list from a source AP, or if not found
in the list add the source AP
- (nm_ap_list_combine): remove, no longer needed
* src/NetworkManagerDevice.c
- Each device now has a "worker" thread from start to end of its life.
Scanning for wireless devices now happens in that thread,
not in a single "wireless scanning thread" for all devices as
previously. Activation consists of adding an idle handler to the
thread's main loop/context, which gets run at the next available
opportunity.
- Wireless scanning is also simplified, there is now only one list of
access points per wireless device, and APs older than 60s are
removed from the list. Previously, we kept results for the last
3 scans and merged whole lists, which was complicated.
- Cleaned up activation debug messages.
- Wireless activation and access-point search routines now use Open System
authentication before trying Shared Key.
- Removed some code in nm_device_update_best_ap() that could cause cards
to loose their link to the access point.
- Scanning now uses a backoff algorithm, where the inverval becomes
progressively longer between scans when the list of scanned access
points doesn't change. A change will revert to the shortest scan
interval (20s).
* src/NetworkManagerWireless.[ch]
- Remove code related to old single-thread wireless scanning
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@382 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* named/nm-named-manager.c
- Use syslog(LOG_WARNING) rather than g_warning() (gnome.org #163961)
* src/NetworkManagerDevice.c
- Rework wireless link detection code to be more reliable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@374 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Implement "auto" frequency/channel support, since cards like Atheros
can't use other frequencies at all when you've told it to use a
specific one, even for scanning.
- Grab the scan mutex around places where we can't tolerate wireless
settings changing underneath us, like nm_device_wireless_network_exists()
and nm_device_activate_wireless()
* src/NetworkManagerWireless.c
- Back scan interval off to 20s instead of 14s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@366 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Don't set mode/freq/bitrate if that mode/freq/bitrate is
already set. Stops some drivers like Atmel from continually
reloading the firmware, which they do upon every configuration
change.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@365 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Use correct timeout value
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.c
- Consolidate communication between NM and NMI by doing only 1 dbus
method call to get Wireless Network info from NMI instead of 6
* src/NetworkManager.c
- Make sure to cancel activation when we receive a SIGTERM, otherwise
when we didn't have an AP to use, we'd wait for one forever without
quitting
* src/NetworkManagerDevice.c
- nm_device_activation_cancel(): Fix a race between dhcp and quitting
activation, dhcp might not have started yet but we don't quit activation
before starting it, so the quit signal gets lost
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@363 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Take down then bring up wired devices after connection so
they send out ipv6 router advertisements
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@356 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Silently fail when setting bitrate doesn't work
Patch from j@bootlab.org:
* src/backends/NetworkManagerDebian
- Update backend to match functionality in RedHat backend
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@355 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c (nm_data_new): Initialize named.
Also, set up a signal handler for SIGINT/SIGTERM, and exit
the mainloop when these signals are received.
(nm_data_free): Unref named.
(sigterm_handler, sigterm_pipe_handler): New functions for
exiting mainloop.
* src/NetworkManagerMain.h (NMData): Add signal handling and
nameserver bits.
* src/NetworkManager.c (nm_device_unref): Quit device mainloop on
unref.
* src/NetworkManagerDHCP.c (set_nameservers): New function;
set nameservers from DHCP response data.
(set_domain_search): Set domain search from DHCP response.
(nm_device_dhcp_configure): Invoke them.
* src/NetworkManagerSystem.c
(nm_system_device_update_resolv_conf): Delete. Deleting
code is totally sweet.
* src/Makefile.am (NetworkManager_LDADD): Add libnamed.
* named/nm-named-manager.h, named/nm-named-manager.c: New files;
implements an object which controls a nameserver. Currently
uses bind 9.
* configure.in: Check for named.
* Makefile.am (SUBDIRS): Add named dir.
* named/named.conf: New template config file.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@352 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Major rework of the DHCP code, taking some cues from pump. We don't
write raw Ethernet packets anymore, which simplifies the code quite
a bit. The new code should be more robust, not hang in recvfrom()
as much, and generally work better. This also means that we need
to force HAL/dbus to use a created GMainContext rather than the
default context, since having the DHCP renew/rebind thread using
its own GMainContext seemed to give dbus a fit. There is also more
debugging information printed from the DHCP loop to help with future
problems.
* Also, if the DHCP server doesn't give us the "routersOnSubnet" option,
assume that the default gateway should be the DHCP server.
Patch from Matthew Schick <matt oss-institute org>
* src/backends/NetworkManagerGentoo.c
- Fix compilation error due to missing "ip4_broadcast"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevicePrivate.h
- Split out the NMDevice struct to a different file so that stuff like
NetworkManagerDHCP.c and NetworkManagerSystem.c can use it
* dhcpcd/client.c
- fprintf->syslog
- (dhcpSendAndRecv): do non-blocking sends and receives, and check to see if we
need to cancel the dhcp request during the send and recv
* dhcpcd/client.h
- Move the DHCP option enum to dhcpcd.h
* src/NetworkManagerDHCP.c
- Split out the actual IP/netmask/etc setting code
- New Renew/Rebind functions
- New timer setup function for renew/rebind operations
* src/NetworkManagerDevice.c
- For device activation, if we are using DHCP then keep the activation thread
alive until device deactivation. We need to renew/rebind the DHCP address
after the T1 (renew) and T2 (rebind) times have expired.
- Increase some timeouts after bringing wireless cards up/down
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@320 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache access point MAC addresses in NetworkManagerInfo after you've explicitly
connected to them. Then, after a scan, match up non-ESSID-broadcasting access
points with any cached MAC addresses from NetworkManagerInfo. Allows us to
show known access points that don't broadcast their ESSID in the menus without
any user intervention whatsoever.
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_get_network_addresses, nmi_dbus_add_network_address): new functions
for dbus method calls "getNetworkAddresses" and "addNetworkAddress"
* src/NetworkManagerAP.[ch]
- Add a "user_addresses" data member to the NMAccessPoint structure
- (nm_ap_get_user_addresses, nm_ap_set_user_addresses): new functions for accessing
the user_addresses data member
* src/NetworkManagerAPList.c
- (nm_ap_list_get_ap_by_address): check user_addresses list too, instead of just
the AP's reported address
- (nm_ap_list_update_network): grab the user_addresses list from NetworkManagerInfo
* src/NetworkManagerDHCP.c
- Increase DHCP timeout from 25s -> 30s
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_network_addresses, nm_dbus_add_network_address): have NMI get/set
user addresses
* src/NetworkManagerDevice.c
- (nm_device_set_wireless_config): bring down the interface, wait 4s, bring it up,
wait 2s, then configure it. Sometimes Prism54 cards will freeze up with
"mgnt tx queue full", seemingly in response to NM controlling the card too much.
So, we take the card down to clear it out.
- (nm_device_do_normal_scan): Copy over AP ESSIDs from the allowed access point list
too, since that's where the user_addresses are
* src/NetworkManagerPolicy.c
- (nm_state_modification_monitor): Tell NMI to add an AP's hardware address to
that wireless networks' user_addresses list upon successful activation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@319 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- (nm_device_clear_activation_fail): new function
* src/NetworkManagerPolicy.c
- (nm_state_modification_monitor): clear the activation_failed flag on devices
when we've dealt with the failure so the user doesn't get failure-dialog-spammed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@317 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): Unref best_ap upon success so we don't
leak the structure, better updating of now_scanning status
- (nm_device_wireless_network_exists): Rewrite for better/faster checking
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@316 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker <palfrey@tevp.net>:
* src/NetworkManagerDevice.c
- Less output to console when no access
points are found during a scan
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@313 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches from j bootlab org
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): wait 5 seconds before attempting to detect
whether the card has a link or not, some cards are slow
- (nm_device_activation_configure_ip): make ipv6 work a bit better
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- Disable the "Login" button on the passphrase dialog until the user
enters a valid passphrase or key
Patches from Tom Parker <palfrey tevp net>
* src/backends/NetworkManagerDebian.c
- Add static IP support to the debian backend
* src/backends/interface_parser.[ch]
- Parse debian interface config files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@303 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Some random fprintf->syslog conversions
- (nm_device_wireless_network_exists): double-check for network
- (nm_device_find_and_use_essid): Copy over encryption key no matter what
* src/NetworkManagerWireless.[ch]
- (nm_wireless_[128|64]bit_ascii_to_hex): make "ascii" argument unsigned again
so that the binary->ascii conversion works (if unsigned, the bitshift
will fill with zeros, which is what's required). Also mask bitshift
result with 0xF for futher assurance.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@300 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.[ch]
src/NetworkManagerDevice.c
- Keep track of the # of attempts to get the WEP key
from the user and pass that along to the info daemon
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@297 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletOtherNetworkDialog.c,
- Disable OK button until valid data is entered
for encryption stuff too
* panel-applet/NMWirelessApplet.c
- Report card strength for current AP if the card
doesn't report strength data for scanned access
points
* src/NetworkManagerDevice.c
- Smooth out cards reported quality, Atmel card was
intermittently reporting no quality data but soon
recovers
* src/NetworkManagerWireless.c
- Better quality data percentage calculation. Atmel
cards (mine at least) seem to report the quality
in percentage format already, so honor that
Patch from <j@bootlab.org>
* NetworkManager.h
info-daemon/NetworkManagerInfoPassphraseDialog.c
info-daemon/passphrase.glade
panel-applet/NMWirelessAppletOtherNetworkDialog.c
panel-applet/essid.glade
src/NetworkManagerAP.c
src/NetworkManagerDevice.c
src/NetworkManagerWireless.[ch]
- Support ASCII WEP keys, in both 40/64 bit and 104/128 bit
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@291 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- (nm_device_set_enc_key): Add parameter to set Authentication
Mode (Open System, Shared Key, or None). We're still using
Shared Key for now though.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@289 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_wireless_network_exists): Actually use the encryption
key we got from the applet when attempting to find a wireless network
- Don't bring devices down so much since on some cards it triggers
firmware hotplugs each time
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): free the passphrase we may have gotten
from the caller
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@279 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletOtherNetworksDialog.[ch]
- New files, implement the "Other wireless network" dialog
* panel-applet/NMWirelessApplet.c
- Move "other wireless network" dialog to separate file
* panel-applet/NMWirelessAppletDbus.[ch]
- Take key and key_type paramaters for the set_device function
* panel-applet/essid.glade
- Add UI bits for encryption settings
* src/NetworkManagerDbus.c
- Retrieve key and key_type params for "setActiveDevice" method call
and pass them on
- unref AP returned from nm_device_get_best_ap() when needed
* src/NetworkManagerDevice.c
- (nm_device_get_best_ap): ref the ap before returning it
- unref AP returned from nm_device_get_best_ap() when needed
- (nm_device_activate_wireless): add "ap" parameter so we don't
need to call nm_device_get_best_ap() here, it was pretty much
redundant anyway
- (AP_NEED_KEY): break second link check condition out into separate
function, and fix segfault when ap->enc_key_source was NULL
- (nm_device_find_and_use_essid): take key and key_type parameters and
pass them along to nm_device_wireless_network_exists(). If the
network does exist, set the passed-in key+key_type on the AP
* src/NetworkManagerPolicy.c
- unref AP returned from nm_device_get_best_ap() when needed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@277 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerUtils.c
- (nm_spawn_process): Fix a potential dereference of NULL
Patches from Peter Jones:
* src/NetworkManagerDevice.c
- (nm_device_test_wireless_extensions): Better check for
wireless devices
* src/NetworkManagerUtils.c
- (nm_spawn_process): Pass in valid stdout and stderr so
executed programs don't randomly SIGPIPE and fail
- (nm_get_wired_driver_support_level): quash hal warning
when checking for USB ethernet device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@276 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoPassphraseDialog.c
panel-applet/NMWirelessApplet.c
- Properly escape gconf keys
* src/NetworkManager.c
- remove unused variables
* src/NetworkManagerAP.c
- (nm_ap_new_from_ap): Don't redundantly set new APs
refcount since it got set in nm_ap_new()
* src/NetworkManagerAPList.c
- (nm_ap_list_combine): Give up ownership of newly created
access points to the ap list, fixes memleak
* src/NetworkManagerDevice.c
- Remove cached_ap_list4 member since its not really needed
- (nm_device_wireless_network_exists): Try to get correct
encryption status of a found AP if its already in our
device list
- (nm_device_do_normal_scan): Clean up scanning a bit, make
memory allocs/deallocs a bit clearer and shorter-lived
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@275 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Trap the "DeviceActivationFailed" signal
* docs/NetworkManager DBUS API.txt
- Add "DeviceActivationFailed" signal
* panel-applet/NMWirelessAppletDbus.c
- Quash the "NetworkManager service not available" message
* src/NetworkManagerDbus.[ch]
- Add the "DeviceActivationFailed" signal
* src/NetworkManagerDevice.c
- Add support for activation_failed flag
- Fix deadlock where activation thread didn't clean itself up, making
main thread still believe it was alive forever (didn't reset activation
flags like activating, just_activated, etc when IP configuration
failed)
* src/NetworkManagerPolicy.c
- Implement logic for DeviceActivationFailed signal, and when activation fails
for wireless networks, try to fall back to some other access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@268 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Place the GtkMenuBar inside a GtkEventBox, and add the Event Box
to the applet object, so we can get tooltips
- Add tooltips (RH #136866)
* src/NetworkManagerDevice.c
- When trying to find a wireless network, try to connect with encryption
turned on first, so that we can more accurately detect whether or not
we need to use encryption for the actual association later on
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@267 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
