Add chains and rules to steer the IGMP reports to the primary member
port. This rules are adapted from the script provided by Eric Garver.
https://gitlab.com/egarver/virtual-networking/-/blob/master/mlag.sh
Fixes: e9268e3924 ('firewall: add mlag firewall utils for multi chassis link aggregation (MLAG) for bonding-slb')
(cherry picked from commit c691dd7ecf)
RFC 4191 section-3.1 says:
When processing a Router Advertisement, a type C host first updates a
::/0 route based on the Router Lifetime and Default Router Preference
in the Router Advertisement message header. [...] The Router Preference
and Lifetime values in a ::/0 Route Information Option override the
preference and lifetime values in the Router Advertisement header.
Fix the RA parsing so that the parameters from a default route option
are applied to the gateway.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1666https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2072
Fixes: c3a4656a68 ('rdisc: libndp implementation')
(cherry picked from commit 6c18fda519)
Calling c_list_link_tail() on a list entry that already belongs to
another list corrupts the other list, in this case 'old_lst_head';
this is explained in the documentation of c_list_link_before():
* @what is not inspected prior to being linked. Hence, it better not
* be linked into another list, or the other list will be corrupted.
This can be reproduced by invoking "nmcli device wifi rescan ssid x"
multiple times; in this way, _scan_request_ssids_track() reuses the
previous SSID data, the list gets corrupted and this causes a crash.
Fixes: 7500e90b53 ('wifi: rework scanning of Wi-Fi device')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2076
(cherry picked from commit 3b75577871)
The tracking of variable "has_intern" in intern_config_read() is
wrong: we set it when adding any entry to the keyfile, but then we
remove the global DNS section without updating the variable.
The effect is that the function might return an empty keyfile instead
of NULL.
Fix this by moving the check on global DNS above.
Fixes: 55c204b9a3 ('core: add support for reading global DNS configuration from keyfile')
(cherry picked from commit 07113dde30)
NetworkManager current code will refuse to activate a connection if its
interface has no SRIOV capacity but holding a empty SRIOV settings.
This patch only valid SRIOV capacity when it is enabled(total_vfs > 0).
Resolves: https://issues.redhat.com/browse/RHEL-58397
Signed-off-by: Gris Ge <fge@redhat.com>
(cherry picked from commit 421ccf8b4c)
When the attach_port()/detach_port() methods do not return immediately
(currently, only for OVS ports), the following situation can arise:
- nm_device_controller_attach_port() starts the attachment by sending
the command to ovsdb. Note that here we don't set
`PortInfo->port_is_attached` to TRUE yet; that happens only after
the asynchronous command returns;
- the activation of the port gets interrupted because the connection
is deleted;
- the port device enters the deactivating state, triggering function
port_state_changed()
- the function calls nm_device_controller_release_port() which checks
whether the port is already attached; since
`PortInfo->port_is_attached` is not set yet, it assumes the port
doesn't need to be detached;
- in the meantime, the ovsdb operation succeeds. As a consequence,
the kernel link is created even if the connection no longer exists.
Fix this by turning `port_is_attached` into a tri-state variable that
also tracks when the port is attaching. When it is, we need to perform
an explicit detach during deactivation.
Fixes: 9fcbc6b37d ('device: make attach_port() asynchronous')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2043
Resolves: https://issues.redhat.com/browse/RHEL-58026
(cherry picked from commit a8329587c8)
When handling event TIMEOUT, "acd_data->probing_timeout_msec" needs to
be always initialized before jumping to "handle_start_probing:";
otherwise, an assertion failure is triggered at:
static void
_l3_acd_data_timeout_schedule_probing_restart(AcdData *acd_data, gint64 now_msec)
{
...
nm_assert(acd_data->probing_timeout_msec > 0);
Even if the ACD data is already in state PROBE, that doesn't mean that
the timeout is already initialized because the PROBE state can also be
reached from a INSTANCE_RESET event; and depending on the previous
state "acd_data->probing_timeout_msec" could be uninitialized.
Fixes-test: @iptunnel_restart
Fixes: b8f9d7b5dd ('l3cfg: rework ACD handling in NML3Cfg to support handling conflicts')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2023
(cherry picked from commit a09f9cc616)
When using the netdev datapath, we wait for the link to appear in
different steps:
1. initially, in act_stage3_ip_config() connects to platform's
"link-changed" signal to detect when the TUN interface appears;
2. when the interface appears, _netdev_tun_link_cb() schedules
_set_ip_ifindex_tun() in a idle handler;
3. _set_ip_ifindex_tun() checks if the link is ready (e.g. if the MAC
address is correct) and in that case it reschedules stage3, which
will move forward with the activation;
4. if the link is not ready in _set_ip_ifindex_tun(), the function
connects again to platform's "link-changed" signal to react to link
changes;
5. after the link changes and it is ready, _netdev_tun_link_cb()
reschedules stage3, which moves forward with the activation;
With the current implementation it is possible that after step 2, if
act_stage3_ip_config() runs because it was already scheduled, it
registers again to the "link-changed" event; then when
_set_ip_ifindex_tun() is invoked it will hit assertion:
nm_assert(!priv->wait_link.tun_link_signal_id);
Fix this by preventing that the signal gets registered again after
step 2.
Fixes-test: @ovs_datapath_type_netdev_with_cloned_mac
Fixes: acf485196c ('ovs-interface: wait that the cloned MAC changes instead of setting it')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2024
(cherry picked from commit b6e69f3467)
Managed type = managed is a bit unclear, because all managed types are
for devices that are managed, but with different levels. Managed type =
managed could be interpreted as other types are unmanaged. Change it to
managed type = full.
Don't enforce IP cleanup when devices are in deactivating state, to
make sure that network connection is still available for pre-down
dispatcher phase.
Fixes ac4e63ddda ('ip: support dhcp-send-release in NMSettingIpConfig')
https://bugzilla.suse.com/show_bug.cgi?id=1228154
Currently if the system hostname can't be determined, NetworkManager
only retries when something changes: a new address is added, the DHCP
lease changes, etc.
However, it might happen that the current failure in looking up the
hostname is caused by an external factor, like a temporary outage of
the DNS server.
Add a mechanism to retry the resolution with an increasing timeout.
https://issues.redhat.com/browse/RHEL-17972
For now, always reapply the VLANs unconditionally, even if they didn't
change in kernel.
To set again the VLANs on the port we need to clear all the existing
one before. However, this deletes also the VLAN for the default-pvid
on the bridge. Therefore, we need some additional logic to inject the
default-pvid in the list of VLANs.
Co-authored-by: Íñigo Huguet <ihuguet@redhat.com>
Currently, nm_platform_link_set_bridge_vlans() accepts an array of
pointers to vlan objects; to avoid multiple allocations,
setting_vlans_to_platform() creates the array by piggybacking the
actual data after the pointers array.
In the next commits, the array will need to be manipulated and
extended, which is difficult with the current structure. Instead, pass
separately an array of objects and its size.
During nm_lldp_neighbor_parse(), the NMLldpNeighbor is not yet added to
the NMLldpRX instance. Consequently, n->lldp_rx is NULL.
Note how we use lldp_x for logging, because we need it for the context
for which interface the logging statement is.
Thus, those debug logging statements will follow a NULL pointer and lead
to a crash.
Fixes: 630de288d2 ('lldp: add libnm-lldp as fork of systemd's sd_lldp_rx')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1550
As part of the conscious language effort we must provide an alternative
option to configure autoconnect-ports system-wide on NetworkManager
configuration file.
The in_buffer is initialized with a NULL buffer. If we never receive and
data, the buffer might still be NULL.
Maybe it actually can never happen, but it's not clear that this is
always the case. To be sure, ensure we don't return a NULL buffer on
success.
It is possible that we learn the link is ready on stage3_ip_config
rather than in link_changed event due to a stage3_ip_config scheduled by
another component. In such cases, we proceed with IP configuration
without allocating the resources needed like initializing DHCP client.
In order to avoid that, if we learn during stage3_ip_config that the
link is now ready, we need to schedule another stage3_ip_config to
allocate the resources we might need.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2004
Fixes: 83bf7a8cdb ('ovs: wait for the link to be ready before activating')
If we add multiple default routes with the same metric and different
preferences, kernel merges them into a single ECMP route, with overall
preference equal to the preference of the first route
added. Therefore, the preference of individual routes is not
respected.
To avoid that, add routes with different metrics if they have
different preferences, so that they are not merged together.
We could configure only the route(s) with highest preference ignoring
the others, and the effect would be the same. However, it is better to
add all routes so that users can easily see from "ip route" that there
are multiple routers available.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1468https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1983
Fixes: 032b4e4371 ('core: use router preference for IPv6 routes')
When activating an ovs-interface we already wait for the cloned MAC
address to be set, ifindex is present and platform link also present but
in some cases this is not enough.
If an udev rule is in place it might modify the interface when it is in
a later stage of the activation causing some race conditions or
problems. In order to solve that, we must wait until the link is fully
initialized.
We are currently asserting that the list of devices waiting for
auto-activation in NMPolicy is not empty. This condition is always
false because:
- NMDevice holds a reference to NMManager
- NMManager holds a reference to NMPolicy
- on dispose, NMDevice asserts that it's not in NMPolicy's
auto-activate list
Therefore if there is any NMDevice alive, NMPolicy must be alive as
well. Instead, if there is no NMDevice alive the list must be empty.
The assertion could fail only when the NMPolicy instance gets
disposed, which usually doesn't happen because it's still referenced
at shutdown.
Fixes: aede228974 ('core: assert that devices are not registered when disposing NMPolicy')
When activating a port with its controller deactivating by new
activation, NM will register `state-change` signal waiting controller to
have new active connections. Once controller got new active connection,
the port will invoke `nm_active_connection_set_controller()` which lead
to assert error on
g_return_if_fail(!nm_dbus_object_is_exported(NM_DBUS_OBJECT(self)))
because this active connection is already exposed as DBUS object.
To fix the problem, we remove the restriction on controller been
write-only and notify DBUS object changes for controller property.
Signed-off-by: Gris Ge <fge@redhat.com>
It's deprecated. Warn any time it is being considered for loading,
instead of at load time, so that the user gets a warning when they got
the plugin in configuration, even if it's build time disabled.
https://issues.redhat.com/browse/RHEL-24622
Prioritize internal, which is what most people should be using. Try
dhclient last, so that it's not attempted when not explicitly
configured or everything else fails.
Before introducing the hostname lookup via nm-daemon-helper and
systemd-resolved, we used GLib's GResolver which internally relies on
the libc resolver and generally also returns results from /etc/hosts.
With the new mechanism we only ask to systemd-resolved (with
NO_SYNTHESIZE) or perform the lookup via the "dns" NSS module. In both
ways, /etc/hosts is not evaluated.
Since users relied on having the hostname resolved via /etc/hosts,
restore that behavior. Now, after trying the resolution via
systemd-resolved and the "dns" NSS module, we also try via the "files"
NSS module which reads /etc/hosts.
Fixes: 27eae4043b ('device: add a nm_device_resolve_address()')
When ModemManager become available, NetworkManager resets
GDBusObjectManagerClient object.
But there is a race condition if object-added is emitted before
modm_ensure_manager(), we need to check existing objects if we want to be
in sync with ModemManager.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1957
Also check for gateway equality when deduplicate routing entries. This
allows to support multiple routes to the same network using different
gateways. This is useful for Thread networks where multiple BRs route
to the same Thread network. If one of these BRs go offline, fallback to
a different router will be much quicker if multiple entries are present.
Note that quick fallback to a different router requires IPv6
reachability probe to be active. Typically Linux disables reachability
probes on Linux machines which act as IPv6 gateway (when forwarding is
enabled).
When the lease expires, the DHCP client emits a LEASE_UPDATE event
with a NULL l3cd. After returning from the handler, it sends
immediately a DHCP DISCOVER message to try to get a new lease.
It is important that when the DISCOVER gets sent the address is no
longer configured on the interface. Otherwise, the server could see
that it is already in use and assign a different one. Therefore,
remove the address synchronously when handling the event.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1532
Currently, when the agent manager is sent a registration request
containing UTF-8 characters, it will form an invalid error message
using only one of the bytes from the UTF-8 sequence, which causes
an assertion in glib to fail, which replaces the returned error message
with "[Invalid UTF-8]". It will also print an assertion failure to the
console, or crash NetworkManager on non-release builds.
This commit makes it so that it instead prints out the character in
hexadecimal form if it isn't normally printable, so that it is once
again a valid UTF-8 string.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1965
Fixes: a30cf19858 ('agent: add agent manager and minimal agent class')
Adds an option in the connectivity section to change the timeout before
the interface is deemed "limited". Previously, it was hardcoded to
20 seconds, but for our usecase (failing over to cell modem if
hardwired ethernet drops), it's nice to be able to failover to another
interface more quickly.
The OVS interface can be matched via MAC address; in that case, the
"connection.interface-name" property of the connection is empty.
When populating the ovsdb, we need to pass the actual interface name
from the device, not the one from the connection.
Fixes: 830a5a14cb ('device: add support for OpenVSwitch devices')
https://issues.redhat.com/browse/RHEL-34617
The group interface is only used during activation; there is no need
to add a pending action for it, because when the device is in
activating state it already delays "startup-complete" via other
pending actions.
