g_ascii_strtoull() returns a guint64, which is very wrong to directly pass
to the variadic argument list of g_object_set(). We expect a guint there
and need to cast.
While at it, use _nm_utils_ascii_str_to_int64() to parse and validate the input.
(cherry picked from commit d506823d4f)
(cherry picked from commit 24177569c1)
When AddConnection() or Update() terminate, the (unrealized) virtual
device should be already be available, otherwise an activation attempt
of that connection can fail.
https://bugzilla.redhat.com/show_bug.cgi?id=1804350
This reverts commit c163207b07.
(cherry picked from commit efc04b1285)
(cherry picked from commit 987c1d282a)
The hostname used for DHCP can be the one obtained from the hostnamed
service and is not guaranteed to be valid, at least with systemd
239. Instead of sending an invalid DHCP option to the server or
failing due to later checks in clients, ignore the hostname and log a
warning when it is invalid.
https://bugzilla.redhat.com/show_bug.cgi?id=1744427
(cherry picked from commit 2da4d54ac3)
The signal is unused (and should be removed).
Still, the parameter passed to g_signal_emit() is a C string, not a
GVariant. I think as there are no subscribers, glib wouldn't actually
do anything with the arguments. Though, I am not sure whether glib still
tries to initialize a GValue with a GVariant type, leading to a crash.
Fixes: f05b7a78c9 ('supplicant: Track P2P Group information, creation and destruction')
(cherry picked from commit c106008091)
(cherry picked from commit 26d6ac5385)
Oddly enough, valgrind was not complaining about this leak...
Fixes: 87b2d783b6 ('core: accept 'ssids':aay option in RequestScan() dictionary parameter')
(cherry picked from commit 5ed1edc02a)
(cherry picked from commit 568c19f07d)
The autoconnection for virtual devices currently works in two
phases. First we detect that there is suitable profile that can
autoconnect and we realize the device. Then, when the device becomes
'disconnected', autoconnect kicks in and starts the activation.
However, if autoconnect is blocked for a device, currently we do step
1 without step 2, leaving a stale interface around. Fix this by also
checking that autoconnect is not blocked during step 1.
https://bugzilla.redhat.com/show_bug.cgi?id=1765047https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/360
(cherry picked from commit 6c716912eb)
(cherry picked from commit 944ff9f9dc)
If a device is being autoactivated and requires a parent that is
blocked due to user request, the autoactivation attempt should fail
because NM shouldn't overrule the user decision.
https://bugzilla.redhat.com/show_bug.cgi?id=1765566
(cherry picked from commit f2dbf8fbc0)
(cherry picked from commit 61d431a9e8)
Many device types take the MTU value from the wired setting; usually
they don't implement the can_reapply_change() method and so the MTU
can't be changed with the Reapply() API.
Instead of implementing the method for all such devices to support the
same property (adding a lot of duplicated code), add a check in
NMDevice to allow the reapply of MTU when we recognize that the device
uses the MTU from the wired setting.
Device types can still decide to implement can_reapply_change() and
support whatever properties they want, even from the wired setting.
(cherry picked from commit 9339d3310e)
(cherry picked from commit 1191eba15a)
If the activation of an assumed device fails, we first set the device
state to FAILED and then to ACTIVATED. In the FAILED state, the active
connection transitions to DEACTIVATED and clears its device pointer;
hence we end up with an inconsistent state which causes assertion
failures in other parts of the code (for example, get_best_ip_config()
assumes that the device of the best active connection is not NULL).
Don't first transition to FAILED and then to ACTIVATED, just set the
latter.
https://bugzilla.redhat.com/show_bug.cgi?id=1737774https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/351
(cherry picked from commit 93e9010b75)
(cherry picked from commit 366b90db87)
svUnsetValue (ifcfg, KEY);
if (condition)
svSetValue* (ifcfg, KEY, ...);
is not good. It requires first clearing the value, before setting
it again.
Various cleanup to fix such uses.
(cherry picked from commit 5028206ec4)
After we set link parameters (auto-negotiation, speed, duplex) in
stage1, the carrier can go down for several seconds because the
Ethernet PHY needs to renegotiate the link. Wait that carrier goes up
before starting the supplicant or the EAPoL start packet can be lost
causing an authentication failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1759797
(cherry picked from commit 838e5b87c2)
No change in behavior. Will be useful when we'll want to unconditionally
add new connection without the matching behavior.
(cherry picked from commit e1a068e93c)
It is really not clear what the user could have meant by specifying a
bootdev= argument, and we deal with it just by ensuring a device with
that name whould come up.
We therefore pick a default connection if there's one (that is a
conneciton that we create if the device name is unspecified, as in
"ip=auto"), otherwise we create a new one.
(cherry picked from commit 30f8154319)
This is so that we end up with a next-server option analogous to what
dhclient helper sends us. Dracut uses this for networked boots.
(cherry picked from commit c1104a5cc2)
With accept_ra set to 1, kernel sends its own router solicitation
messages and parses the advertisements. This duplicates what NM
already does in userspace and has unwanted consequences like [1] and
[2].
The only reason why accept_ra was re-enabled in the past was to apply
RA parameters like ReachableTime and RetransTimer [3]; but now NM
supports them and so accept_ra can be turned off again.
Also, note that previously the option was set in
addrconf6_start_with_link_ready(), and so this was done only when the
method was 'auto'. Instead, now we clear it for all methods except
'ignore'.
[1] https://mail.gnome.org/archives/networkmanager-list/2019-June/msg00027.html
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1734470
[3] https://bugzilla.redhat.com/show_bug.cgi?id=1068673
(cherry picked from commit 5a534529e2)
IPv6 router advertisement messages contain the following parameters
(RFC 4861):
- Reachable time: 32-bit unsigned integer. The time, in
milliseconds, that a node assumes a neighbor is reachable after
having received a reachability confirmation. Used by the Neighbor
Unreachability Detection algorithm. A value of zero means
unspecified (by this router).
- Retrans Timer: 32-bit unsigned integer. The time, in milliseconds,
between retransmitted Neighbor Solicitation messages. Used by
address resolution and the Neighbor Unreachability Detection
algorithm. A value of zero means unspecified (by this router).
Currently NM ignores them; however, since it leaves accept_ra=1, the
kernel parses RAs and applies those parameters for us [1].
In the next commit kernel handling of RAs will be disabled, so let NM
set those neighbor-related parameters.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/net/ipv6/ndisc.c?h=v5.2#n1353
(cherry picked from commit 5f0c6f8d3b)
We try to set only one time the MTU from the connection to not
interfere with manual user changes.
If at some point the parent interface changes temporarily MTU to a
lower value (for example, because the connection was reactivated), the
kernel will also lower the MTU on child interface and we will not
update it ever again.
Add a workaround to this. If we detect that the MTU we want to set
from connection is higher that the allowed one, go into a state where
we follow the parent MTU until it is possible to set again the desired
MTU. This is a bit ugly, but I can't think of any nicer way to do it.
https://bugzilla.redhat.com/show_bug.cgi?id=1751079
(cherry picked from commit ec28f5b343)
A MACsec connection doesn't have an ordering dependency with its
parent connection and so it's possible that the parent gets activated
later and sets a greater MTU than the original one.
It is reasonable and useful to keep the MACsec MTU configured by
default as the maximum allowed by the parent interface, that is the
parent MTU minus the encapsulation overhead (32). The user can of
course override this by setting an explicit value in the
connection. We already do something similar for VLANs.
https://bugzilla.redhat.com/show_bug.cgi?id=1723690
(cherry picked from commit 438a0a9ad5)
Introduce a generic function to set a MTU based on parent's one. Also
define a device-specific @mtu_parent_delta value that specifies the
difference from parent MTU that should be set by default. For VLAN it
is zero but other interface types (for example MACsec) require a
positive value due to encapsulation overhead.
(cherry picked from commit 5cf57f4522)
In nm_acd_manager_announce_addresses() we should not only start the
probes but also add the acd file descriptor to the main loop.
Otherwise, a timer is armed to send the announcements but it never
fires and no announcements are sent.
Fixes: d9a4b59c18 ('acd: adapt NM code and build options')
https://bugzilla.redhat.com/show_bug.cgi?id=1767681
(cherry picked from commit 14992ab9cd)
If the 802.1X authentication fails and 802-1x.optional is set,
continue with activation. In this case, subscribe to the auth-state
supplicant property so that any dynamic IP method can be restarted
when the authentication succeeds. This is because upon authentication
the switch could have changed the VLAN we are connected to.
(cherry picked from commit 8afce75bf3)
Introduce a 802-1x.optional boolean property that can be used to
succeed the connection even after an authentication timeout or
failure.
(cherry picked from commit 8763e6da9c)
Handle rd.znet with legacy interface names too, the index for eth or ctc
corresponds to the position on the command line.
(cherry picked from commit 22e388d90e)
When processing the rd.znet option set the interface name only in case when
the persistent interface names feature isn't disabled via net.ifnames=0
[lkundrak@v3.sk: minor tweaks to the net.ifnames=0 parsing]
(cherry picked from commit c7423dca89)
