Before, when having a test with nmtst_init_assert_logging(),
the caller was expected to setup logging separately according
to the log level that the test asserts against.
Since 5e74891b58, the logging
level can be reset via NMTST_DEBUG also for tests that
assert logging. In this case, it would be useful, if the test
would not overwrite the logging level that is set externally
via NMTST_DEBUG.
Instead, let the test pass the logging configuration to
nmtst_init_assert_logging(), and nmtst will setup logging
-- either according to NMTST_DEBUG or as passed in.
This way, setting the log level works also for no-expect-message
tests:
NMTST_DEBUG="debug,no-expect-message,log-level=TRACE" $TEST
keyfile should become our main import/export format. It is desirable,
that a keyfile can contain every aspect of a connection.
For blob certificates, the writer in core daemon would always write
them to a file and convert the scheme to path.
This behavior is not great for a (hyptetical) `nmcli connection export`
command because it would have to export them somehow outside of keyfile,
e.g. by writing them to temporary files.
Instead, if the write handler does not handle a certificate, use a
default implementation in nm_keyfile_write() which adds the blob inside
the keyfile.
Interestingly, keyfile reader already supported reading certificate
blobs. But this legacy format accepts the blob as arbitrary
binary without marking the format and without scheme prefix.
Instead of writing the binary data directly, write it with a new
uri scheme "data:;base64," and encode it in base64.
Also go through some lengths to make sure that whatever path
keyfile plugin writes, can be read back again. That is, because
keyfile writer preferably writes relative paths without prefix.
Add nm_keyfile_detect_unqualified_path_scheme() to encapsulate
the detection of pathnames without file:// prefix and use it to
check whether the path name must be fully qualified.
We have nm_keyfile_plugin_utils_should_ignore_file() to ignore certain
files based on patterns. We also need a matching escape function to
avoid saving connections with a name we would ignore later.
https://bugzilla.gnome.org/show_bug.cgi?id=735824
After refactoring libnm-core to use GBytes instead of
GByteArray/DBUS_TYPE_G_UCHAR_ARRAY, it was forgotten to update
keyfile writer.
This causes keyfile writer to skip the NMSetting8021x:password-raw setting
and raise a g_critical() warning.
Fixes: c43f88907b
NMIPRoute is used by NMSettingIPConfig, but also
NMIPConfig. In the former case, default routes are (still)
disallowed. But in the NMIPConfig use-case, it can make sense
to expose default routes as NMIPRoute instances.
Relax the restriction on the NMIPRoute API to allow this
future change.
No code actually supports having NMIPRoute instances with
prefix length zero (default routes). Up to now, all such uses
would be a bug.
https://bugzilla.gnome.org/show_bug.cgi?id=739969
Signed-off-by: Thomas Haller <thaller@redhat.com>
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
The gateway is a global property of the IPv4/IPv6 configuration, not
an attribute of any particular address. So represent it as such in the
API; remove the gateway from NMIPAddress, and add it to
NMSettingIPConfig.
Behind the scenes, the gateway is still serialized along with the
first address in NMSettingIPConfig:addresses, and is deserialized from
that if the settings dictionary doesn't contain a 'gateway' key.
Adjust nmcli's interactive mode to prompt for IP addresses and gateway
separately. (Patch partly from Jirka Klimeš.)
NMSettingIP[46]Config let you associate a gateway with each address,
and the writable settings backends record that information. But it
never actually gets used: NMIP4Config and NMIP6Config only ever use
the first gateway, and completely ignore any others. (And in the
common usage of the term, an interface can only have one gateway
anyway.)
So, stop pretending that multiple gateways are meaningful; don't
serialize or deserialize gateways other than the first in the
'addresses' properties, and don't read or write multiple gateway
values either.
Split a base NMSettingIPConfig class out of NMSettingIP4Config and
NMSettingIP6Config, and update things accordingly.
Further simplifications of now-redundant IPv4-vs-IPv6 code are
possible, and should happen in the future.
Merge NMIP4Address and NMIP6Address into NMIPAddress, and NMIP4Route
and NMIP6Route into NMIPRoute. The new types represent IP addresses as
strings, rather than in binary, and so are address-family agnostic.
Add nm-core-types.h, typedefing all of the GObject types in
libnm-core; this is needed so that nm-setting.h can reference
NMConnection in addition to nm-connection.h referencing NMSetting.
Removing the cross-includes from the various headers causes lots of
fallout elsewhere. (In particular, nm-utils.h used to include
nm-connection.h, which included every setting header, so any file that
included nm-utils.h automatically got most of the rest of libnm-core
without needing to pay attention to specifics.) Fix this up by
including nm-core-internal.h from those files that are now missing
includes.
Each plugin defined its own error domain, though none actually defined
any errors. Replace these with appropriate uses of
NM_SETTINGS_ERROR_INVALID_CONNECTION and NM_SETTINGS_ERROR_FAILED.
NMSettingSerial:parity was defined as a char-typed property that could
have the (case-sensitive!) values 'n', 'E', or 'o'. This is zany. Add
an NMSettingSerialParity enum, and use that instead.
Change all DBUS_TYPE_G_UCHAR_ARRAY properties to G_TYPE_BYTES, and
update corresponding APIs. Notably, this means they are now refcounted
rather than being copied.
Update the rest of NM for the changes. The daemon still converts SSIDs
to GByteArrays internally, because changing it to use GBytes has lots
of trickle-down effects. It can possibly be changed later.
Make the :addresses and :routes properties be GPtrArrays of
NMIP4Address, etc, rather than just reflecting the D-Bus data.
Make the :dns properties be arrays of strings rather than arrays of
binary IP addresses (and update the corresponding APIs as well).
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
Remove the virtual :interface-name properties and their getters, and
use property overrides to do backward-compat handling when
serializing/deserializing.
Now when constructing an NMConnection from a hash, if the virtual
property is set and the NMSettingConnection property isn't, then the
override for NMSettingConnection:interface-name will set that property
to the value of the virtual interface-name. And when converting an
NMConnection to a hash, the overrides for the virtual properties will
return the value of NMSettingConnection:interface-name.
The virtual :interface-name properties (eg,
NMDeviceBond:interface-name) are deprecated in favor of
NMSettingConnection:interface-name, and nm_connection_verify() ensures
that their values are kept in sync. So (a) there is no need to set
those properties when we can just set
NMSettingConnection:interface-name instead, and (b) we can replace any
calls to the setting-specific get_interface_name() methods with
nm_connection_get_interface_name() or
nm_setting_connection_get_interface_name().
The new nm_connection_normalize() function allows to fixup an incomplete connection.
The keyfile reader should call normalize on a connection, so that we can implement
common normalizations there instead of inside the settings plugin.
Signed-off-by: Thomas Haller <thaller@redhat.com>
The fact that NMRemoteConnection has to be an NMConnection and
therefore can't be an NMObject means that it needs to reimplement bits
of NMObject functionality (and likewise NMObject needs some special
magic to deal with it). Likewise, we will need a daemon-side
equivalent of NMObject as part of the gdbus port, and we would want
NMSettingsConnection to be able to inherit from this as well.
Solve this problem by making NMConnection into an interface, and
having NMRemoteConnection and NMSettingsConnection implement it. (We
use some hacks to keep the GHashTable of NMSettings objects inside
nm-connection.c rather than having to be implemented by the
implementations.)
Since NMConnection is no longer an instantiable type, this adds
NMSimpleConnection to replace the various non-D-Bus-based uses of
NMConnection throughout the code. nm_connection_new() becomes
nm_simple_connection_new(), nm_connection_new_from_hash() becomes
nm_simple_connection_new_from_hash(), and nm_connection_duplicate()
becomes nm_simple_connection_new_clone().
Include <linux/if_ether.h> and <linux/if_infiniband.h> from
nm-utils.h, to get ETH_ALEN and INFINIBAND_ALEN, and remove those
includes (as well as <net/ethernet.h> and <netinet/ether.h>, and
various headers that had been included to get the ARPHRD_* constants)
from other files where they're not needed now.
Add NetworkManager.h, which includes all of the other NM header, and
require all external users of libnm to use that rather than the
individual headers.
(An exception is made for nm-dbus-interface.h,
nm-vpn-dbus-interface.h, and nm-version.h, which can be included
separately.)
Remove deprecated functions and enum types.
For now, deprecated properties are still around, because removing them
would cause warnings when talking to older implementations.
Since the API has not changed at this point, this is mostly just a
matter of updating Makefiles, and changing references to the library
name in comments.
NetworkManager cannot link to libnm due to the duplicated type/symbol
names. So it links to libnm-core.la directly, which means that
NetworkManager gets a separate copy of that code from libnm.so.
Everything else links to libnm.
Some subdirectories of src/ encapsulate large chunks of functionality,
but src/config/, src/logging/, and src/posix-signals/ are really only
separated out because they used to be built into separate
sub-libraries that were needed either for test programs, or to prevent
circular dependencies. Since this is no longer relevant, simplify
things by moving their files back into the main source directory.
Clean up some of the cross-includes between headers (which made it so
that, eg, if you included NetworkManagerUtils.h in a test program, you
would need to build the test with -I$(top_srcdir)/src/platform, and if
you included nm-device.h you'd need $(POLKIT_CFLAGS)) by moving all
GObject struct definitions for src/ and src/settings/ into nm-types.h
(which already existed to solve the NMDevice/NMActRequest circular
references).
Update various .c files to explicitly include the headers they used to
get implicitly, and remove some now-unnecessary -I options from
Makefiles.
Several plugins were using -I$(top_srcdir)/libnm-glib, which is bad
since libnm-glib has its own nm-types.h which is different from src's.
Worse yet, some were actually linking against libnm-glib (which
presumably only worked at all because they weren't calling any
functions in it and so the linker just ignored the request). Fix both
problems.
nm-version.h was getting disted, making srcdir!=builddir work for
tarball builds, but not for git builds.
Also, remove "-I${top_builddir}/include" from all Makefile.ams, since
there's nothing generated in include/ any more.
In this mode, nmtst itself will not log anything and not set the logging
level. Also, it will set g_log_set_always_fatal().
This is for tests that want to assert against all logged messages via
g_test_expect_message().
In this mode also setting the logging level via NMTST_DEBUG variable has
no effect. The test is expected to manage the logging level itself and
changing the logging level might interfere with the test.
As a showcase, move keyfile/tests/test-keyfile.c to nmtst.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Don't call nm_utils_hwaddr_type () with random len, because it causes ugly
(NetworkManager:25325): libnm-util-CRITICAL **: file nm-utils.c: line 1989 (nm_utils_hwaddr_type): should not be reached
And add a testcase.
https://bugzilla.gnome.org/show_bug.cgi?id=730514
This results in some nice coloring. Only move the tests that are called
without arguments from check-local to TESTS.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Use g_test_expect_message() in the various daemon-side test programs,
to avoid spewing error messages when (successfully) running "make
check".
The ifnet and ifupdown plugins are extremely verbose, so they were
partially "fixed" by turning down the logging level from INFO to WARN
in those tests.
test-dhcp-options needed to be converted to gtestutils so that the
newly-added check in nm-dbus-manager would recognize it as a test
program and not try to create a private bus.
