* gnome/vpn-properties/nm-vpn-properties.c: Intercept and short-circuit
the "delete_event" signal on the druid's parent window and handle it
our way, lest using the WM to close the druid results in a series of
bloody and ultimately lethal errors.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1677 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-properties.c: Validate VPN settings on
'Back' too or else the 'Forward' option is initially disabled despite
valid input.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1676 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix bad but simple bug where an active modem connection did not update
NM's connection state, breaking any app that did online/offline:
* src/NetworkManagerMain.h: Add 'modem_active' member to NMData,
represented whether a dial up connection is active, or not.
* src/nm-dbus-nm.c: Set and unset 'modem_active' in response
to modem activation and deactivation.
* src/NetworkManagerDbus.c: When asked our state, do not return
disconnected if the modem is active.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1674 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet.c: Remove the 'Remove' option that I added to the
applet. It just confuses the crap out of people and does not make a
lot of sense, as the daemon still runs.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1671 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/Arch/networkmanager.in: Added checks for HAL and dhcdbd
in start of service.
* src/backends/NetworkManagerArch.c: (nm_system_get_mtu): Added to
get Archlinux backend up to date.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1669 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Vinay R <rvinay@novell.com> and Robert Love <rml@novell.com>,
to add support for per-route MSS and improve support for per-interface
MTU:
* src/NetworkManagerSystem.c: Modify nm_system_device_set_ip4_route to
optionally take an MSS parameter and set it for the given route.
Remove nm_system_device_set_ip4_route_with_iface. Pass in the
NMIP4Config's stored MSS, if any.
* src/nm-ip4-config.c: Add 'mtu' and 'mss' to NMIP4Config, representing
the interface's MTU and the route's MSS, respectively. Add functions
nm_ip4_config_get_mtu, nm_ip4_config_set_mtu, nm_ip4_config_get_mss,
and nm_ip4_config_set_mss for retrieving and setting the MTU and the
MSS.
* src/nm-ip4-config.h: Add prototypes for nm_ip4_config_get_mtu,
nm_ip4_config_set_mtu, nm_ip4_config_get_mss, and
nm_ip4_config_set_mss.
* src/vpn-manager/nm-vpn-service.c: Modify to receive the MSS from the
VPN daemon.
* src/backends/NetworkManager{Arch,Debian,Gentoo,RedHat,Slackware,SUSE}.c:
Change the retval of nm_system_get_mtu to guint32.
* src/dhcp-manager/nm-dhcp-manager.c: Set the MTU on the new DHCP-given
NMIP4Config to the MTU provided by the system, if any. TODO: If DHCP
servers can specify MTU's, we should set it here if the MTU was not
provided.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1660 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Diffe <diffie@blazebox.homeip.net>
* src/backends/NetworkManagerSlackware.c
- Don't restart howl, since it's been replaced by Avahi
in most distributions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1652 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/other-network-dialog.c: Do not allow the user to try to
create WPA-EAP Ad-Hoc networks because such an action makes no sense.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1642 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Jürg Billeter <j@bitron.ch>:
* src/nm-logging.c: Add printf modifier to fix warning on 64-bit
systems.
* src/nm-netlink-monitor.c: Include <net/if.h> instead of <linux/if.h>
as we prefer glibc over kernel headers, if possible.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1641 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Jon Escombe <list@dresco.co.uk>:
* gnome/applet/nm-gconf-wso.c: Add missing NM_AUTH_TYPE_WPA_EAP case.
* gnome/applet/nm-gconf-wso-wpa-eap.c: If retrieving the gconf values
fail, don't bail out. We don't expect all of the various WPA-EAP
values to be present.
* src/nm-ap-security.c: We need to match all capabilities for each
encryption type, not any one of them.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1640 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerSuSE.c: Revert 2006-03-17 commit and again
restart, not reload, ypbind. Unfortunately there is no superior
solution.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1639 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-notifications.c:
When displaying a notification, make sure to get rid of the
previous notification so as to not have competing bubbles,
and stop leaking the old one.
* gnome/applet/applet.c:
* gnome/applet/applet.h:
Add a new 'notification' member to the applet, and zero it out
and free it appropriately.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1635 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by j <j@bootlab.org>:
* gnome/applet/applet.glade: Don't set the invisible_char property,
which simply overrides the GTK default. By and by, this behavior
ought to be fixed in Glade.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1633 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Bug fix by Timo Hoenig <thoenig@suse.de>:
* gnome/applet/applet-dbus.c: Let the applet reconnect to DBUS on
disconnect. Otherwise, we have the daemon surviving DBUS restarts
and the applet going AWOL.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c: Create NM_DHCP_TIMEOUT
preprocessor define and use it instead of open-coded the DHCP
timeout, which is currently 25 seconds, everywhere.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1629 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Implement "Dynamic WEP", which is basically WPA authentication and WEP
key exchange via WPA, ostensibly providing good security without
requiring hardware that supports full WPA. Also, add UI elements to
allow the user to select the pairwise & group cipher for WPA Enterprise
networks, too:
* gnome/applet/applet.glade: Update glade file.
* gnome/applet/nm-gconf-wso-wpa-eap.c: Serialize and deserialize the
key type, too, to and from gconf.
* gnome/applet/wireless-security-option.c: Add "wpa_eap" parameter to
wso_wpa_create_key_type_model(), noting whether we are handling PSK
or EAP configuration, and in the latter case add in "Dynamic WEP" if
the capabilities match.
* gnome/applet/wso-private.h: Update wso_wpa_create_key_type_model()'s
prototype.
* gnome/applet/wso-wpa-eap.c: Manage UI elements for the key type and
serialize from UI to DBUS.
* gnome/applet/wso-wpa-psk.c: Cannot fail and always returns at least
one element.
* libnm-util/dbus-helpers.c: Update nmu_security_serialize_wpa_eap(),
nmu_security_serialize_wpa_eap_with_cipher(), and
nmu_security_deserialize_wpa_eap() to take a "key_type" parameter and
serialize/deserialize the key type via DBUS as the new third DBUS
parameter.
* libnm-util/dbus-helpers.h: Update prototypes.
* src/nm-ap-security-wpa-eap.c: Deserialize the key type from DBUS,
too. If the key type is WEP104, do Dynamic WEP, which means
"IEEE8021X" for "key_mgmt". Also add support for user-specified
pairwise and group ciphers (fixes a FIXME).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1628 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c, src/NetworkManagerSystem.h: Add
nm_system_get_mtu(), which returns a user-provided or system-mandated
MTU value for a given device, if any, or zero if no such value
exists. Add nm_system_set_mtu() to set the MTU for a given device
if we have a provided value.
* src/nm-device.c: Set the MTU of devices.
* src/backends/NetworkManagerSuSE.c: Read MTU, if any, from sysconfig.
* src/backends/NetworkManagerDebian.c,
src/backends/NetworkManagerGentoo.c,
src/backends/NetworkManagerRedHat.c,
src/backends/NetworkManagerSlackware.c: Implement stub functions.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1626 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerSuSE.c: Do "rcypbind reload" to send the
signal SIGHUP to ypbind, not "rcypbind restart" to physically restart
it, in case it is not running in the first place. We just want its
configuration reloaded. Also, do not "rcypbind stop" on device down.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerSuSE.c: Do "rcypbind reload" to send the
signal SIGHUP to ypbind, not "rcypbind restart" to physically restart
it, in case it is not running in the first place. We just want its
configuration reloaded.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1614 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet.glade, gnome/applet/wso-wep-ascii.c,
gnome/applet/wso-wep-hex.c, gnome/applet/wso-wep-passphrase.c: The
label "WEP 40/128-bit" is inconsistent because the physical key size
is 40 or 104-bits, to which a 24-bit initialisation vector is
appended, forming a 64 or 128-bit traffic key. Thus, the label ought
to read "40/104" or "64/128". I do not care much which, but most
users think of "silver" and "gold" encryption as 64 and 128-bits, so
let's stick with that. Thus, s/"40/128"/"64/128"/g. Also, since our
WEP passphrase support only handles 128-bit keys, and any future
64-bit passphrase support will require a new option (no way to auto-
detect the target key size), explicitly label our passphrase support
"WEP 128-bit Passphrase".
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1608 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c: Do not start dhcdbd, but rely on
the system init scripts (or some other mechanism) starting it (or a
compatible DBUS service) before NetworkManager runs. This means that
distributions might need to update their init scripts. This fixes
possible races and is quite a bit cleaner.
* initscript/SUSE/networkmanager.in: Update to start dhcdbd before
starting the NetworkManager daemon.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1607 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/vpn-properties/nm-vpn-properties.c: Hide the next page's
widgets, too, if they exist, in case the user hit the back button.
Fixes a bug where the details page contains the widgets of multiple
VPN modules (Novell bug #157048).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1596 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Timo Hoenig <thoenig@suse.de>:
* dispatcher-daemon/NetworkManagerDispatcher.c: Let the dispatcher
daemon survive DBUS restarts, too.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1593 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet.glade: Add toggles to show/obfuscate the
passphrase or key.
* gnome/applet/wso-wep-ascii.c, gnome/applet/wso-wep-hex.c,
gnome/applet/wso-wep-passphrase.c, gnome/applet/wso-wpa-eap.c,
gnome/applet/wso-wpa-psk.c: Show and obfuscate passphrases and keys
in response to "toggled" signal on new toggle.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Track pending call requests in the applet, and report how many are
outstanding, and how long each completed one takes.
* gnome/applet/applet-dbus-devices.c
gnome/applet/applet-dbus-vpn.c
- Track pending calls
* gnome/applet/applet-dbus.[ch]
- Remove some unused enums
- (nma_dbus_send_with_callback, nma_dbus_send_with_callback_replied):
new functions to track dbus pending calls and spit out some
statistics about them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c, src/NetworkManagerAP.h: Have the function
nm_ap_set_timestamp() take the second and micro-second parameters as
direct arguments, which avoids both a dynamic memory allocation and a
structure-to-structure copy! Add a new interface, the aptly named
nm_ap_set_timestamp_via_timestamp(), to set the timestamp from an
existing GTimeVal, as nm_ap_set_timestamp() once did, for use with
the return from nm_ap_get_timestamp(). New users should use the new
nm_ap_set_timestamp(), not nm_ap_set_timestamp_via_timestamp(), for
the extreme benefit to performance.
* src/NetworkManagerAPList.c, src/nm-dbus-nmi.c,
src/backends/NetworkManagerSuSE.c: Use the new functions as needed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/Makefile.am: Define AUTOSTARTDIR.
* gnome/applet/applet.c: Add 'Remove' option to the right click menu,
to exit the applet. As a sweet side-effect, idea courtesy of Chris
Rivera, detect if the applet was auto-started. If so, ask the user
if he or she would like to stop automatically running the applet on
login. If so, disable autostart.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1561 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.pc.in: Provide an -I to the NetworkManager include
directory in CFLAGS so developers can actually use NetworkManager.h.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1560 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c: Use preprocessor defines and not
open-coded integer constants. Add state_to_string() to map a given
state to a textual description, and provide that when notifying of
state change.
* src/dhcp-manager/nm-dhcp-manager.h: Provide defines for the dhcdbd
states, copied and cleaned up from dhcdbd.d. Ideally, we would use
this header directly, but it is currently not installed on most
systems.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1559 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Process netlink messages in device subclasses rather than in
NetworkManager.c. Also add support for recognizing Wireless Events.
* configure.in
- Find GLIB_GENMARSHAL
* src/Makefile.am
- Since we're marshalling custom types for wireless event signals,
we get to create our own marshallers using GLIB_GENMARSHAL
* src/NetworkManager.c
- (nm_monitor_wired_link_state): renamed to nm_monitor_setup
- (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and
cut down somewhat. We no longer process signals here.
- (nm_data_new): create the netlink monitor here, and remove a
useless call to nm_policy_schedule_device_change_check()
- (nm_data_free): get rid of the netlink monitor here
- (nm_device_link_activated, nm_device_link_deactivated): removed
- (main): don't create the netlink monitor here, let nm_data_new
do that. Call nm_policy_schedule_device_change_check() right
before we jump to the mainloop to figure out which device
to use first
* src/NetworkManagerSystem.[ch]
- (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index):
convert back and forth from interface names to interface
indexes
* src/nm-device-802-11-wireless.c
- (real_init): connect to wireless-event signals from the netlink
monitor object
- (nm_device_802_11_wireless_event): new function, schedule handler
for wireless event signals from the netlink monitor object. We
want the handler to run in the device's context
- (wireless_event_helper): handle wireless-event signals from netlink
- (nm_device_802_11_wireless_dispose): disconnect wireless-event
signal handler
* src/nm-device-802-11-wireless.h
- remove unused prototype for nm_device_802_11_wireless_new
* src/nm-device-802-3-ethernet.c
- (real_init): new function; set up signal handlers for link events
- (nm_device_802_3_ethernet_link_activated): new function, schedule
handler for netlink link activated events on device's main loop
- (link_activated_helper): when we get a link activated event, set
the device's link to be active
- (nm_device_802_3_ethernet_link_deactivated): new function; schedule
handler for netlink link deactivated events on device's main loop
- (link_deactivated_helper): when we get a link deactivated event, set
the device's link to be inactive
- (nm_device_802_3_ethernet_dispose): disconnect signal handler on
dispose
* src/nm-device-802-3-ethernet.h
- remove unused prototype for nm_device_802_3_ethernet_new
* src/nm-device.[ch]
- (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface
but locks the device list
- (nm_device_set_active_link): a little bit of cleanup and de-indenting
* src/nm-netlink-monitor.[ch]
- (nm_netlink_monitor_class_install_signals): New signal
"wireless-event"
- (nm_netlink_monitor_new): keep reference to NMData so we can get
at the device list
- (nm_netlink_monitor_event_handler): expand for wireless events too
* src/nm-marshal-main.c
- Include generated nm-marshal.c and nm-marshal.h
* src/nm-marshal.list
- List of custom marshal functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-notifications.h
- Protect prototype of nma_send_event_notification() because it
includes libnotify-specific types
- Include libnotify/libnotify.h too, since we technically need it
* gnome/applet/applet.c
- (nma_show_vpn_failure_dialog): fix usage of g_return_if_fail
- (nma_show_vpn_login_banner_dialog): add some error checking
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1551 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Clean up activation cancellation. Should be a lot faster now. Observed
an issue with wireless devices between stage 2 and 3 of activation, where
activation would be cancelled, but the device thread wouldn't notice until
the supplicant association timed out. Reorganize activation such that
a cancellation handler gets immediately scheduled in the device's thread,
and devices have a chance to perform any custom cleanup too.
* src/nm-device.[ch]
- (activation_cancel_handler): new device-type-specific function
for cleaning up device-type-specific stuff on cancellation
- (cancel_activation): removed
- (nm_device_activation_cancel): subsume functionality of
real_cancel_activation, but instead of doing anything, punt
operation to a handler that's run in device-thread context
- (nm_device_schedule_activation_handle_cancel): fix spelling of
a warning message
- (activation_handle_cancel_helper): cancellation handler run in
device-thread context, calls device-type-specific cancelation,
then tears down the activation request
- (real_activation_cancel_handler): generic cancellation handler,
deals with cancelling any in-process DHCP request
- (nm_device_activate_stage1_device_prepare,
nm_device_activate_stage2_device_config,
nm_device_activate_stage3_ip_config_start,
nm_device_activate_stage4_ip_config_get,
nm_device_activate_stage4_ip_config_timeout,
nm_device_activate_stage5_ip_commit): don't call
nm_device_schedule_activation_handle_cancel() any more, since
cancellation will have been already scheduled for us by
nm_device_activation_cancel(). Just exit the function and
assume that the cancel handler will be called next.
* src/nm-device-802-3-ethernet.c
- (real_act_stage2_config): remove; didn't do anything anyway
* src/nm-device-802-11-wireless.c
- (supplicant_status_cb): ensure we don't do anything if the activation
got cancelled
- (real_activation_cancel_handler): implement; cancel user key request
on activation cancellation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1549 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (supplicant_send_network_config): assume that drivers that don't
support WPA pretty much suck, and can't handle NM scanning
along with wpa_supplicant.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1548 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix a crash if an "Other wireless network" was chosen, failed, then
chosen again from the applet's menu. If the other network wasn't
noticed in a scan, it wouldn't have any capabilities, but would still
be listed because the user forced the network. To fix this, we set
sensible capabilities on the forced network, which will get overwritten
with the correct ones if the network shows up later in a scan.
* src/nm-ap-security.h
- Add a new "get_default_capabilities_func" member to the
NMAPSecurity class
* src/nm-ap-security.c
- (nm_ap_security_get_default_capabilities): new function
* src/nm-ap-security.c
src/nm-ap-security-wep.c
src/nm-ap-security-wpa-psk.c
src/nm-ap-security-wpa-eap.c
- Implement get_default_capabilities_func() for all, which
uses the information contained in a specific NMAPSecurity
object to determine default AP capabilites necessary
to support that object
As a secondary measure, we now prune artificial access points that fail
to be activated right away. The thing failed, and we have no scan data for
it, so it's pretty much useless since security information is only saved
in the applets when a connection is successful.
* src/NetworkManagerAPList.c
- (nm_ap_list_merge_scanned_ap): mark any ap noticed in a scan
not artificial. If we see it, it's no longer a figment of the
user's imagination :)
* src/NetworkManagerPolicy.c
- (nm_policy_activation_failed): send along the failed AP if we
have it
* src/nm-device-802-11-wireless.c
- (real_activation_failure_handler): remove artificial APs from
the device list, because activation failed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1542 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
