* test/Makefile.am
test/libnm-util/Makefile.am
test/nm-supplicant-test.c
- Add test program emulating the way NM drives wpa_supplicant
to help debug supplicant issues
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2022 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* tests/nm-online.c: New file. Simple utility that returns exit status
noting whether the connection is offline or online. If offline on
start, it waits 60 seconds (or a command-line given value) for an
online signal. If it times out, it again returns offline. This is
useful for scripts that want to wait for network connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1706 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* test/test-common.c
test/test-common.h
test/Makefile.am
- Move to a test-common subdirectory
* test/libnm-util/test-ciphers.c
- Move test data to test-inputs.h
- Test WPA ciphers too
* test/libnm-util/test-dbus-helpers.c
- Test serialization/deserialization of ciphers
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1240 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Move NetworkManager.h -> include/NetworkManager.h
* Split out VPN stuff to include/NetworkManagerVPN.h
* Fix up makefiles to include new location
* Fix up sources to include NetworkManagerVPN.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1130 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* test/nmtest.c
- Removed
* test/nm-tool.c
test/Makefile.am
- Added new "nm-tool" tool that gives quite a bit more
information
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1006 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dan Reed: DHCP options D-BUS API
Exposes the DHCP options that a device receives to clients over D-BUS.
* configure.in
- A few cleanups
* dhcpcd/client.h
- Correct names, option length, and types for DHCP options
* dhcpcd/dhcpcd.[ch]
- Clarify function names that access DHCP options & data
* src/NetworkManagerDHCP.c
- Use new DHCP data access functions
* src/NetworkManagerDbus.c
- Message handler for DHCP functions
* src/nm-dbus-dhcp.[ch] (new)
- DHCP dbus methods
* test/nm-dhcp-opt-test.c
- Test DHCP D-BUS API and return all present DHCP options
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@444 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/gtkcellview.[ch]
panel-applet/menu-info.c
- Fix GTK version checks to be <= rather than <
* test/Makefile.am
- Include the libtool archive of libnm_glib rather than
trying to pull in the .so
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@397 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm_glib/
- Client library for applications using glib
* configure.in
various Makefiles
- Split NM_CFLAGS and NM_LIBS into separate variables
like DBUS_*, HAL_* and GLIB_*
* src/NetworkManager.c
src/NetworkManagerMain.h
- (nm_schedule_status_signal_broadcast): at the earliest convenience,
broadcast a status changed signal over DBUS from the main thread.
Still unused anywhere for the moment.
Patch from j@bootlab.org
* panel_applet/NMWirelessAppletDbus.c
src/NetworkManagerDbus.c
- Correct INT32->UINT32 mistmatch between NM and the panel applet
for the "getMode" method call
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@368 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Add checks for GConf libs & headers & flags
* info-daemon/Makefile.am
- Add GConf flags & libs to compile/link stages of NetworkManagerInfo
* info-daemon/NetworkManagerInfo.[ch]
- Don't use gquarks for data storage, just use normal data storage
- Add gconf bits to watch /system/networking/wireless/allowed_networks
* info-daemon/NetworkManagerDbus.[ch]
- Add method call for getting allowed networks
- Add method calls for getting an allowed network's essid, priority, and key
- Hook the method calls up to GConf
- Split user key dialog code into separate function (nmi_dbus_get_key_for_network)
- nmi_dbus_nmi_message_handler(): make sure to unref the reply message after sending
* src/NetworkManagerDbus.[ch]
- Switch for enumeration of networks to using essid instead
* test/Makefile.am
test/nminfotest.c
- Add test program for NetworkManagerInfo
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@19 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
- Add info-daemon directory
* configure.in
- Check for glade libs and headers
- Add info-daemon directory
* src/NetworkManagerAP.c
- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
copied over to the new AP.
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
- Remove nm_dbus_signal_need_key_for_network()
- Add disabled code for asynchronous user wep key callbacks
- Add functions for getting, setting, and cancelling user key operations
- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
- Add "setKeyForNetwork" dbus method call on NetworkManager object
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
logic is in device activation now
- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
key is wrong) trigger get-user-key pending action
- Implement get-user-key pending action stuff, tie to dbus messages
- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
- Add nm_device_ap_list_get_ap_by_essid()
- Instead of copying "best" access points, ref them instead so that the key we set
sticks around
* src/NetworkManagerPolicy.c
- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
- Don't cancel pending actions on a device if its the same device as last iteration
- Only promote pending_device->active_device if activation was successfull
* src/Makefile.am
- Rename nmclienttest->nmtest
* info-daemon/Makefile.am
info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfo.h
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoDbus.h
info-daemon/passphrase.glade
info-daemon/NetworkManagerInfo.conf
info-daemon/keyring.png
- Import sources for info-daemon, which pops up dialog for passphrase/key when
NetworkManager asks for it, and also will (soon) provide "allowed" access point
lists to NetworkManager by proxying user's GConf
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@16 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
