Otherwise a device which was set as unmanaged (updated to the REMOVED
internal sys-state) will never update its own sys-state if later set
back as managed.
Manage either when setting explictly the device to managed either when
just upping a connection on an unmanaged device.
On cleanup, unconditionally release a device from its master if the
link is missing or it doesn't have a master, otherwise the master
would later try to release the slave, hitting the following assertion:
"nm_platform_link_release: assertion 'slave > 0' failed"
#0 g_logv
#1 g_log
#2 g_return_if_fail_warning
#3 nm_platform_link_release
#4 release_slave
#5 nm_device_master_release_one_slave
#6 slave_state_changed
#7 ffi_call_unix64
#8 ffi_call
#9 g_cclosure_marshal_generic
#10 g_closure_invoke
#11 signal_emit_unlocked_R
#12 g_signal_emit_valist
#14 _set_state_full
#15 nm_device_state_changed
#16 nm_device_unrealize
#17 _platform_link_cb_idle
#18 g_main_context_dispatch
#19 g_main_context_dispatch
#20 g_main_context_iterate
#21 g_main_loop_run
#22 main
Fixes: 9e8218f99ahttps://bugzilla.redhat.com/show_bug.cgi?id=1448907
Use nm_device_get_ip_ifindex() to obtain the right ifindex for the
device. Fixes the following:
nm_platform_ip4_address_get_all: assertion 'ifindex > 0' failed
#0 _g_log_abort () from target:/lib64/libglib-2.0.so.0
#1 g_logv () from target:/lib64/libglib-2.0.so.0
#2 g_log () from target:/lib64/libglib-2.0.so.0
#3 nm_platform_ip4_address_get_all (self=self@entry=0x1181020, ifindex=ifindex@entry=0) at src/platform/nm-platform.c:2640
#4 nm_ip4_config_capture (platform=0x1181020, ifindex=ifindex@entry=0, capture_resolv_conf=capture_resolv_conf@entry=0) at src/nm-ip4-config.c:271
#5 ip4_config_merge_and_apply (self=self@entry=0x1254a70, config=config@entry=0x0, commit=commit@entry=1) at src/devices/nm-device.c:5447
#6 activate_stage5_ip4_config_commit (self=0x1254a70) at src/devices/nm-device.c:8299
#7 activation_source_handle_cb (self=0x1254a70, family=family@entry=2) at src/devices/nm-device.c:4421
#8 activation_source_handle_cb4 (user_data=<optimized out>) at src/devices/nm-device.c:4358
#9 g_idle_dispatch () from target:/lib64/libglib-2.0.so.0
#10 g_main_context_dispatch () from target:/lib64/libglib-2.0.so.0
#11 g_main_context_iterate.isra () from target:/lib64/libglib-2.0.so.0
#12 g_main_loop_run () from target:/lib64/libglib-2.0.so.0
#13 main (argc=<optimized out>, argv=<optimized out>) at src/main.c:435
Fixes: a21b8882cc
with the rework in commit #87a3df2e572ed47b5f76f6d1cad63ce622296e21
the check of the return value of _device_activate () is no more needed.
Remove useless check and var.
ip link add name $'d\xccf\\c' type dummy
Use nm_utils_str_utf8safe_escape() to sanitize non UTF-8 sequences
before exposing them on D-Bus. The operation can be reverted client
side via nm_utils_str_utf8safe_unescape() or simply g_strcompress().
Note that this preserves all valid UTF-8 sequences as-is, with exception
of the backslash escape character and ASCII control characters. Thus, this
is a change in behavior for strings that contain such characters.
Note that nmcli is not changed to somehow unescape the string before
printing. As the string is not valid UTF-8 (or contains ASCII characters
that need escaping), they are not printable as-is, so unescaping before
printing makes little sense.
If the platform signaled that the external configuration changed (and
thus update_ipX_config() is scheduled) and we are doing a commit of
the new configuration, update priv->ext_ipX_config. Without this, the
commit will remove addresses added externally but not yet captured in
the external configuration.
https://bugzilla.redhat.com/show_bug.cgi?id=1449873
platform: signal: link changed: 2: eth0 <DOWN;broadcast,multicast> mtu ...
...
device[0x7f90c29c64d0] (eth0): bringing up device
...
platform: signal: link changed: 2: eth0 <UP,LOWER_UP;broadcast,multicast,up,running,lowerup> mtu ...
...
device (eth0): link connected
...
device[0x7f90c29c64d0] (eth0): add_pending_action (2): 'carrier wait'
Note how we schedule the pending action 'carrier-wait', although the device
already has carrier. That means, the pending action will not be removed
until timeout, 5 seconds later.
Avoid scheduling 'carrier-wait' if we already have carrier.
However, don't just add the pending action 'carrier-wait' only during
nm_device_bring_up(). Instead, always schedule the carrier_wait timeout.
This gives a grace period during which we keep setting 'carrier-wait' whenever
we have no carrier. This should prevent two cases:
- during nm_device_bring_up() the platform state might not yet have
caught up. If we don't add the pending action there, we will add
it a moment later when carrier goes away.
- bringing the interface up might cause carrier to get lost for a
moment (flapping). If that happens within the timeout, also add the
pending action.
nm_device_set_carrier_from_platform() is only called from two places.
- both check for NM_DEVICE_CAP_CARRIER_DETECT, so move that check
inside the function.
- drop the logging in realize_start_setup(). nm_device_set_carrier() already
does logging.
- always set the fake carrier in nm_device_set_carrier_from_platform().
For the fake carrer, we anyway expect it to be already TRUE in most
case, so usually this should have no effect.
Also emit a property changed signal. That is necessary to refresh the
D-Bus property.
Adding/Removing a pending action with assert_not_yet_pending/
assert_is_pending means that we expect that no action is taken.
Downgrade the logging level in those cases to <trace>.
Don't give the subclass the ability to override the parents
behavior. The parent implementation is not intended to allow
for that. Instead, restrict the flexibility of how the virtual
function integrates with the larger picture. That means, the
virtual function is only called at one place, and there is only
one implementation in NMDeviceEthernet (and it doesn't really
matter whether the implementation chains up the parent implementation
or not).
It's not the correct thing to do, but is the same behavior we've done
previously.
DAD is not even going to start until there's carrier and the client would
just wait indefinitely. Ideally, the client would choose not to waiat, but
it currently there's no way the client would discover what is going on.
https://bugzilla.redhat.com/show_bug.cgi?id=1446367
Set the @was_active flag for external activations with DHCP, so that
DHCP is retried multiple times in case of failure, as we do for
managed connections when the lease expires and for assumed
connections.
Fixes test: renewal_gw_after_dhcp_outage_for_assumed_var1
Fixes: e3113fdc4b
We check the return value of _get_stable_id(); when it is NULL
priv->ndisc would stay NULL too and we would crash when dereferencing
@error.
Actually, _get_stable_id() can never return NULL, so replace the check
with an assertion.
Most of the IPv6 methods require a non-tentative link local address
configured on the interface; we look at priv->ip6_config to determine
if such address exist. If the configuration is out-of-sync, we may
proceed with configuration when the link-local address does not exist
or is still tentative, especially because we toggle the "disable_ipv6"
sysctl parameter just before, which clears all IPv6 addresses on the
interface.
Ensure that priv->ext_ip6_config_captured is up-to-date before
continuing with the IPv6 configuration, and use it to determine
whether suitable addresses are present.
Fixes test: @ipv6_set_ra_announced_mtu
Fixes: 8f4caab601
update_ip6_config() also removes addresses and routes no longer
present externally from the configuration, so it can't be called
before the changes are committed.
This reverts commit 8f4caab601.
Most of the IPv6 methods require a non-tentative link local address
configured on the interface; we look at priv->ip6_config to determine
if such address exist. If the configuration is out-of-sync, we may
proceed with configuration when the link-local address does not exist
or is still tentative, especially because we toggle the "disable_ipv6"
sysctl parameter just before, which clears all IPv6 addresses on the
interface.
Ensure that priv->ip6_config is up-to-date before continuing with the
IPv6 configuration.
Fixes test: @ipv6_set_ra_announced_mtu
nm_device_update_firewall_zone() would only reconfigure the firewall
zone when the device is fully activated. That means, while the device
is activating, changing the firewall zone is not working. Activation
might take a long time with DHCP, or with master devices waiting
for their slaves.
For example:
nmcli connection add type team con-name t-team ifname i-team autoconnect no
nmcli connection up t-team
Note how t-team/i-team is waiting for a slave device. During stage3,
we already set firewall.zone to default.
nmcli connection modify t-team connection.zone external
Note how changing the firewall zone does not immidiately take
effect. Only later, during IP_CHECK state the firewall zone
is reset -- but only for devices with differing ip_ifindex.
https://bugzilla.redhat.com/show_bug.cgi?id=1445242
For regular devices that don't have a separate ip_iface/ip_ifindex,
the ip_ifindex is left at zero. Hence, the condition is always
true and does not work as intended, resulting in setting the
firewall zone twice.
Fixes: 7cf5c326bc
When a DHCP connection is active and the DHCP server is temporarily
unreachable, we restart DHCP for some times before failing the
connection. From the user point of view, restarting NM (and thus
assuming the existing connection) should not change this behavior.
However, if NM is restarted while the server is temporarily down, at
the moment we immediately fail because we consider the DHCP
transaction our first try. Fix this by restoring the multiple tries
when we detect that DHCP was active before because the connection is
assumed.
We call nm_device_activate_stage3_ipX_start() in various places,
e.g. after a carrier change or when a master enslaves a new device to
configure IP for the device. If the device is a slave in state
IP_CONFIG, this makes it transition to IP_CHECK, while it should stay
in IP_CONFIG until the master becomes ready. When the master is ready,
it will move slaves directly to SECONDARIES, skipping IP configuration
entirely.
The dad_counter is hashed into the resulting address. Since we
want the hashing to be independent of the architecture, we always
hash 32 bit of dad_counter. Make the dad_counter argument of
type guint32 for consistency.
In practice this has no effect because:
- for all our (current!) architectues, guint is the same as
guint32.
- all callers of nm_utils_ipv6_addr_set_stable_privacy() keep
their dad-counter argument as guint8, so they never even pass
numbers larger then 255.
- nm_utils_ipv6_addr_set_stable_privacy() limits dad_counter
further against RFC7217_IDGEN_RETRIES.
Fixes a crash where the default DNS domain to be announced together with the
prefixes to be delegated is updated at the same time the device is being
unrealized.
https://bugzilla.redhat.com/show_bug.cgi?id=1425818
nm_pacrunner_manager_remove() required a "tag" argument. It was a
bug for callers trying to remove a configuration for a non-existing
tag.
That effectively means, the caller must keep track of whether a certain
"tag" is pending. The caller also must remember the tag -- a tag that he
must choose uniquely in the first place.
Turn that around and have nm_pacrunner_manager_send() return a (non
NULL) call-id. This call-id may later be used to remove the
configuration.
Apparently, previously the tracking of the "tag" was not always correct
and we hit the assertion in nm_pacrunner_manager_remove().
https://bugzilla.redhat.com/show_bug.cgi?id=1444374
nm_config_device_state_*() always access the file system directly,
they don't cache data in NMConfig. Hence, they don't use the
@self argument.
Maybe those functions don't belong to nm-config.h, anyway. For lack
of a better place they are there.
Before, setting a device to unmanaged causes it to go down and clear
the interface state.
It may be useful to instruct NetworkManager not to touch the device
anymore but leave the current state up. Changing behavior for
nmcli device set "$DEV" managed no
To get the previous behavior, one has to first disconnect the interface
via
nmcli device disconnect "$DEV"
nmcli device set "$DEV" managed no
Note that non-permanent addresses like from DHCP will eventually time
out because NetworkManager stops the DHCP client. When instructing
NetworkManager to let go of the device, you have to take it over in
any way you see fit.
https://bugzilla.redhat.com/show_bug.cgi?id=1371433
This also ensures that we own a reference to the
NMPlatform, NMRouteManager and NMDefaultRouteManager
instances. See bug rh#1440089 where we might access
the singleton getter after destroing the singleton
instance of NMRouteManager. This is prevented by
keeping a reference to those instances -- indirectly
via the netns instance.
Later, we may add support for multiple namespaces. Then it might
make sense to swap the NMNetns instance of a device when moving
the device between namespaces.
Also, drop the use of singelton instances.
https://bugzilla.redhat.com/show_bug.cgi?id=1440089
Don't try to remove the configuration if we haven't added it in the
first place, for example when the connection gets deactivated before
it completes or for slave connections without IP configuration.
Fixes: 3ad89223d0
If a VPN provides a proxy, we want to restrict the usage of that proxy
to URLs in the VPN domain. For all other connections, the proxy should
be used for all domains.
Fix some issues in nm-pacrunner-manager.c:
- when adding a configuration through nm_pacrunner_manager_send(), we
kept an association between the interface name and the pacrunner
configuration object path, so that the configuration for that
interface could be removed later. Unfortunately not all
configurations have an interface associated, so we need a more
generic way to identify configurations. Introduce a new @tag
argument that serves as key to match configurations
- the interface name of the last pushed configuration was stored in
the manager private config and reused later; this could cause
issues when there are multiple outstanding D-Bus calls. The
interface is not needed anymore after the previous point.
- remove() didn't actually remove the configuration from the list
We now update the default route metric based on the result of the
connectivity check. When we update the metric and there is no other
changes to the IP configuration, NMPolicy is not notified about it and
can't update the best device until an actual change in IP config
happens. This results in a wrong best device set in NMPolicy.
NMDevice has NM_DEVICE_IP[4,6]_CONFIG_CHANGED signals that are used
exclusively by NMPolicy to detect when there is a change in
configuration that requires an update of global DNS and routing
information. Emit those signals also when the default route changes.
Commit 029a0a21ea ("device: split out cloned MAC decision from
nm_device_hw_addr_set_cloned()") accidentally removed the assignment
of the new device @hw_addr_type, which then was left to
HW_ADDR_TYPE_UNSET. As a consequence, we never restored the initial
MAC address when the connection was deactivated. Fix this.
Fixes: 029a0a21ea
