There's a couple of places where compose the output using nmc_print().
However, most of them (such as connectivity status or logging level) are
mostly one-line outputs where pager wouldn't make sense. These two stand
out.
allow to specify the DUID to be used int the DHCPv6 client identifier
option: the dhcp-duid property accepts either a hex string or the
special values "lease", "llt", "ll", "stable-llt", "stable-ll" and
"stable-uuid".
"lease": give priority to the DUID available in the lease file if any,
otherwise fallback to a global default dependant on the dhcp
client used. This is the default and reflects how the DUID
was managed previously.
"ll": enforce generation and use of LL type DUID based on the current
hardware address.
"llt": enforce generation and use of LLT type DUID based on the current
hardware address and a stable time field.
"stable-ll": enforce generation and use of LL type DUID based on a
link layer address derived from the stable id.
"stable-llt": enforce generation and use of LLT type DUID based on
a link layer address and a timestamp both derived from the
stable id.
"stable-uuid": enforce generation and use of a UUID type DUID based on a
uuid generated from the stable id.
Just to give it some variety. Also, note how the message from the
server cannot be translated. Which is the case with real NetworkManager
as well, and is a major usability issue.
The real NetworkManager service has a clear understanding how a valid
connection looks like. This is what nm_connection_verify() returns.
Let also our stub-service verify connections the same way.
Note that this is cumbersome, because the stub service uses python's
dbus module, while libnm only accepts creating NMConnection instances
from GVariant. Thus, we need to a cumbersome conversion first.
It would be better if test-networkmanager-service.py would also expose
normalized connections on D-Bus. But that requires the inverse converion
from GVariant to python dbus.
use nmc_print() for the job.
Also, localize non-terse output.
Also, fix bug with
$ nmcli c s /org/freedesktop/NetworkManager/ActiveConnection/1
if active connection #1 is invisible to the user.
Also, previously, fill_output_active_connection() wrongly tries to
write to a field that doesn't exist:
set_val_strc (arr, 13-idx_start, s_con ? nm_setting_connection_get_slave_type (s_con) : NULL);
The output of `nmcli connection show` contains also information about
whether the profile is currently active, for example the device and
the current (activation) state.
Even when a profile can be activated only once (without supporting
mutiple activations at the same time), there are moments when a
connection is activating and still deactivating on another device.
NetworkManager ensures in the case with single activations that
a profile cannot be in state "activated" multiple times. But that
doesn't mean, that one profile cannot have multiple active connection
which reference it. That was already handled wrongly before, because
`nmcli connection show` would only search the first matching
active-connection. That is, it would arbitrarily pick an active
connection in case there were multiple and only show activation
state about one.
Furthermore, we will soon also add the possibility, that a profile can be
active multiple times (at the same time). Especially then, we need to
extend the output format to show all the devices on which the profile is
currently active.
Rework printing the connection list to use nmc_print(), and fix various
issues.
- as discussed, a profile may have multiple active connections at each time.
There are only two possibilities: if a profile is active multiple
times, show a line for each activation, or otherwise, show the
information about multiple activations combined in one line, e.g. by
printing "DEVICE eth0,eth1". This patch, does the former.
We will now print a line for each active connection, to show
all the devices and activation states in multiple lines.
Yes, this may result in the same profile being printed multiple times.
That is a change in behavior, and inconvenient if you do something
like
for UUID in $(nmcli connection show | awk '{print$2}'); do ...
However, above is anyway wrong because it assumes that there are no
spaces in the connection name. The proper way to do this is like
for UUID in $(nmcli -g UUID connection show); do ...
In the latter case, whenever a user selects a subset of fields
(--fields, --get) which don't print information about active connections,
these multiple lines are combined. So, above still works as expected,
never returning duplicate UUIDs.
- if a user has no permissions to see a connection, we previously
would print "<invisible> $NAME". No longer do this but just print
the ID was it is reported by the active-connection. If the goal
of this was to prevent users from accidentally access the non-existing
connection by $NAME, then this was a bad solution, because a script
would instead try to access "<invisible> $NAME". This is now solved
better by hiding the active connection if the user selects "-g NAME".
- the --order option now sorts according to how the fields are shown.
For example, with --terse mode, it will evaluate type "802-11-wireless"
but with pretty mode it will consider "wifi". This may change the
ordering in which connections are shown. Also, for sorting the name,
we use g_utf8_collate() because it's unicode.
The files in shared/nm-utils are not compiled as one static library,
instead each subproject that needs (parts of) them, re-compiles the
files individually.
The major reason for that is, because we might have different compile
flags, depending on whether we build libnm-core or
libnm-util/libnm-glib. Actually, I think that is not really the case,
and maybe this should be refactored, to indeed build them all as a
static library first.
Anyway, libnm-util, libnm-glib, clients' common lib, they all need a
different set of shared files that they should compile. Refactor
"shared/meson.build" to account for that and handle it like autotools
does.
Another change is, that "shared_c_siphash_dep" no longer advertises
"include_directories: include_directories('c-siphash/src')". We don't
put c-siphash.h into the include search path. Users who need it, should
include it via "#include <c-siphash/src/c-siphash.h>". The only exception
is when building shared_n_acd library, which is not under our control.
Most nmcli calls from clients/tests don't change the server's state.
Hence, they can easily run in parallel.
Run tests in parallel. No longer handle one nmcli invocation after the other.
Instead, spawn groups of processes in parallel, and track the pending jobs.
Only at certain synchronization points we call self.async_wait() to
wait for all previous jobs to complete.
This reduces the test time on my machine from 7 to 3 seconds. Arguably,
that matters less during a full `make check -j 8`, because the entire
set of tests anyway takes longer than 7 seconds. So when running the
entire test suite, the machine is kept busy anyway. It matters however
for manual invocations.
Add new stable-id specifier "${DEVICE}" to explicitly declare that the
connection's identity differs per-device.
Note that for settings like "ipv6.addr-gen-mode=stable" we already hash
the interface's name. So, in combination with addr-gen-mode, using this
specifier has no real use. But for example, we don't do that for
"ipv4.dhcp-client-id=stable".
Point being, in various context we possibly already include a per-device
token into the generation algorithm. But that is not the case for all
contexts and uses.
Especially the DHCPv4 client identifier is supposed to differ between interfaces
(according to RFC). We don't do that by default with "ipv4.dhcp-client-id=stable",
but with "${DEVICE}" can can now be configured by the user.
Note that the fact that the client-id is the same accross interfaces, is not a
common problem, because profiles are usually restricted to one device via
connection.interface-name.
Otherwise, the generated client-id depends purely on the profile's
stable-id. It means, the same profile (that is, either the same UUID
or same stable-id) on different hosts will result in identical client-ids.
That is clearly not desired. Hash a per-host secret-key as well.
Note, that we don't hash the interface name. So, activating the
profile on different interfaces, will still yield the same client-id.
But also note, that commonly a profile is restricted to one device,
via "connection.interface-name".
Note that this is a change in behavior. However, "ipv4.dhcp-client-id=stable"
was only added recently and not yet released.
Fixes: 62a7863979
The developer can re-generate .expected files with
$ NM_TEST_REGENERATE=1 ./clients/tests/test-client.py
Note that these files are also dist-ed, so that the tests also work
from a source-tarball. For that, we need to add them to EXTRA_DIST.
Previously, this was done manually in the base Makefile.am file. This
was cumbersome, because when adding a new test, the developer would need
to manually add the files.
Now, let the test (with NM_TEST_REGENERATE=1) also generate a makefile
part.
This bug resulted in spurious lines with "--pretty --mode tabular",
whenever nmc_print() was called with multiple rows.
Currently, the only case where this was visible was with:
$ nmcli --pretty general permissions
(note that "--mode tabular" is the default).
Fixes: 16299e5ac0
Before:
$ nmcli c modify Dukkha ipv4.ignore no
Error: invalid property 'ignore': 'ignore' is ambiguous (ignore-auto-routes x (null)).
After:
$ nmcli c modify Dukkha ipv4.ignore no
Error: invalid property 'ignore': 'ignore' is ambiguous (ignore-auto-routes x ignore-auto-dns).
call_nmcli_l() would test for 3 languages: 'C', 'de', and 'pl'. There
is no fundamental difference between 'de' and 'pl', so there is no need
to test for two languages.
Activate the same profile on two devices. Arguably, real NetworkManager
(currently) does not allow that. But the D-Bus API is fine with
having multiple ActiveConnections for one SettingsConnection.
So, also the client should do something sensible.
Also, later we will add wildcard support to NetworkManager, which means
that a profile can be active multiple times (simultaneously).
This is purely for (manual) printf debugging. Hence, it is unused in the commited code.
The point is, to add printf statements to nmcli or libnm, like
if (getenv ("MY_HACK1")) { ...
and trigger it from test-client.py via
self.call_nmcli(..., extra_env = { 'MY_HACK1': '1' } )
The reasons are:
- I want to locate all implmenetations of the get_fcn() handler. By
consistently using this macro, you can just grep for the macro and
find them all.
- all implementations should follow the same style. This macro
enforces the same names for arguments and avoids copy&paste.
- if we are going to add or change an argument, it becomes easier.
That's because we can easily identify all implementation and can
change arguments in one place.
These helper function will be needed in the next commit to be earlier.
Helper functions like these, that operate solely on trival types (in
this case, converting an enum to a string), make generally sense to have
at the beginning of the source file. Because they themself have few/no
dependencies and are rather trivial and self contained.
Functions like nmc_find_connection() and nmc_find_active_connection()
can easily find multiple matching results. For example, the
"connection.id" in NetworkManager is not enforced to be unique,
so if the user adds multiple connections with the same name,
they should be all selected.
The previous API had a @pos argument, that allowed to iterate over
the results. Change that, to return all matches in a GPtrArray.
Also, extend connection-show and other places, to anticipate that
a connection might be active multiple times in any moment.
- no more global variables, except those in the new variable "gl".
- don't pass that bus instance around. Use the singleton gl.bus.
- separate creation of ExportedObj from exporting on D-Bus.
- use enum values loaded from NM via GObject introspection.
- the visible change is that the generated D-Bus paths now start
counting at one. That is also how NetworkManager behaves, and
it looks nicer to have no zero ID for an object.
