We added "ipv4.route-table-sync" and "ipv6.route-table-sync" to not change
behavior for users that configured policy routing outside of NetworkManager,
for example, via a dispatcher script. Users had to explicitly opt-in
for NetworkManager to fully manage all routing tables.
These settings were awkward. Replace them with new settings "ipv4.route-table"
and "ipv6.route-table". Note that this commit breaks API/ABI on the unstable
development branch by removing recently added API.
As before, a connection will have no route-table set by default. This
has the meaning that policy-routing is not enabled and only the main table
will be fully synced. Once the user sets a table, we recognize that and
NetworkManager manages all routing tables.
The new route-table setting has other important uses: analog to
"ipv4.route-metric", it is the default that applies to all routes.
Currently it only works for static routes, not DHCP, SLAAC,
default-route, etc. That will be implemented later.
For static routes, each route still can explicitly set a table, and
overwrite the per-connection setting in "ipv4.route-table" and
"ipv6.route-table".
The name nm_device_get_priority() is misleading. Nowadays it's only used
for the default route metric, and nothing else.
Rename it, and make it static.
We already have various ways to mark a device as unmanaged.
1) via udev-rule ENV{NM_UNMANAGED}. This can be overwritten via D-Bus
at runtime.
2) via settings plugin. That is NM_CONTROLLED=no for ifcfg-rh and
keyfile.unmanaged-devices in NetworkManager.conf.
3) at runtime, via D-Bus. This is persisted in the run state file
and persists restarts (but not reboot).
This adds another way via NetworkManager.conf file. Note that the
existing keyfile.unmanaged-devices (above 2) is also a configuration
optin in NetworkManager.conf. However it has various downsides:
- it cannot be overwritten at runtime (see commit
c210134bd5).
- you can only explicitly mark a device as unmanaged. That means,
you cannot use it to manage a device which is unmanaged due to
a udev rule.
- the name "keyfile.*" sounds like it's only relevant for the keyfile settings
plugin. Nowadays the keyfile plugin is always loaded, so the option applies
to NetworkManager in general.
https://github.com/NetworkManager/NetworkManager/pull/29
- cleanup data type and use guint32 consistently. We might want to
introduce a new "infinity" value. But since libnm's
NM_SETTING_IP_CONFIG_DHCP_TIMEOUT asserts against the range
0 - G_MAXINT32, we cannot express it as -1 anyway. So, infinity
will have the numerical value G_MAXINT32, hence guint32 is just
fine.
- make use of existing ipv6.dhcp-timeout setting and add global
default configuration in NetworkManager.conf
- instead of having subclasses call nm_device_set_dhcp_timeout(),
add a virtual function get_dhcp_timeout().
Remove NMDefaultRouteManager. Instead, add the default-route to the
NMIP4Config/NMIP6Config instance.
This basically reverts commit e8824f6a52.
We added NMDefaultRouteManager because we used the corresponding to `ip
route replace` when configuring routes. That would replace default-routes
on other interfaces so we needed a central manager to coordinate routes.
Now, we use the corresponding of `ip route append` to configure routes,
and each interface can configure routes indepdentently.
In NMDevice, when creating the default-route, ignore @auto_method for
external devices. We shall not touch these devices.
Especially the code in NMPolicy regarding selection of the best-device
seems wrong. It probably needs further adjustments in the future.
Especially get_best_ip_config() should be replaced, because this
distinction VPN vs. devices seems wrong to me.
Thereby, remove the @ignore_never_default argument. It was added by
commit bb75026004, I don't think it's
needed anymore.
This brings another change. Now that we track default-routes in
NMIP4Config/NMIP6Config, they are also exposed on D-Bus like regular
routes. I think that makes sense, but it is a change in behavior, as
previously such routes were not exposed there.
NMIP4Config, NMIP6Config, and NMPlatform shall share one
NMDedupMultiIndex instance.
For that, pass an NMDedupMultiIndex instance to NMPlatform and NMNetns.
NMNetns than passes it on to NMDevice, NMDhcpClient, NMIP4Config and NMIP6Config.
So currently NMNetns is the access point to the shared NMDedupMultiIndex
instance, and it gets it from it's NMPlatform instance.
The NMDedupMultiIndex instance is really a singleton, we don't want
multiple instances of it. However, for testing, instead of adding a
singleton instance, pass the instance explicitly around.
Currently, device types like Bond hack around ignore-carrier
setting, as they always want to ignore-carrier.
Prepare so that also for such master types, we rely and honor the
ignore-carrier setting better. In the next commit, bond, bridge and
team devices they will get ignore-carrier turned on by default.
For externally managed interfaces, we create an in-memory connection
and keep the device with sys-iface-state=external.
When the user actively modifies the connection, we persist it to
storage. But we also must take over managing the device.
One problem is that nm_device_reapply() errors out if the device
is still activating. It's unclear how to reapply the connection
while the device is in the process of activation. So, if the user
modifies the created connection very quickly, reapplying the settings
will fail.
https://bugzilla.redhat.com/show_bug.cgi?id=1462223
Don't log in a function that basically just inspects state, without
mutating it. Instead, pass the reason why a connection could not be
generated to the caller so that we have one sensible log message.
Originally 850c977 "device: track system interface state in NMDevice",
intended that a connection can only be assumed initially when seeing
a device for the first time. Assuming a connection later was to be
prevented by setting device's sys-iface-state to MANAGED.
That changed too much in behavior, because we used to assume external
connections also when they are activated later on. So this was attempted
to get fixed by
- acf1067 nm-manager: try assuming connections on managed devices
- b6b7d90 manager: avoid generating in memory connections during startup for managed devices
It's probably just wrong to prevent assuming connections based on the
sys-iface-state. So drop the check for sys-iface-state from
recheck_assume_connection(). Now, we can assume anytime on managed,
disconnected interfaces, like previously.
Btw, note that priv->startup is totally wrong to check there, because
priv->startup has the sole purpose of tracking startup-complete property.
Startup, as far as NMManager is concerned, is platform_query_devices().
However, the problem is that we only assume connections (contrary to
doing external activation) when we have a connection-uuid from the state
file or with guess-assume during startup.
When assuming a master device, it can fail with
(nm-bond): ignoring generated connection (IPv6LL-only and not in master-slave relationship)
thus, for internal reason the device cannot be assumed yet.
Fix that by attatching the assume-state to the device, so that on multiple
recheck_assume_connection() calls we still try to assume. Whenever we try
to assume the connection and it fails due to external reasons (like, the connection
no longer matching), we clear the assume state, so that we only try as
long as there are internal reasons why assuming fails.
https://bugzilla.redhat.com/show_bug.cgi?id=1452062
The state file should only be read initially when NM starts, that is:
during NMManager's platform_query_devices().
At all later points, for example when a software device gets destroyed
and re-realized, the state file is clearly no longer relevant.
Hence, pass the set-nm-owned flag from NMManager to realize_start_setup().
This is very much the same as with the NM_UNMANAGED_FLAG_USER_EXPLICT flag,
which we also read from the state-file.
The plugins may use stuff from core, but not the other way around.
Including "bluetooth/nm-bluez-common.h" is wrong.
The UUID argument is always "nap" in the NAP case. We don't need
the flexibility that it might be anything else. Just drop it.
As far as NMDevice is concerned, it anyway wouldn't (or shouldn't
know what the uuid is. It says register, and NMBluez5Manager should
figure out the details.
We'll use this to let the devices know they can retry autoactivation
because some component became available without actually having any
data that would be useful for that device.
Adjust the comment.
Don't give the subclass the ability to override the parents
behavior. The parent implementation is not intended to allow
for that. Instead, restrict the flexibility of how the virtual
function integrates with the larger picture. That means, the
virtual function is only called at one place, and there is only
one implementation in NMDeviceEthernet (and it doesn't really
matter whether the implementation chains up the parent implementation
or not).
Before, setting a device to unmanaged causes it to go down and clear
the interface state.
It may be useful to instruct NetworkManager not to touch the device
anymore but leave the current state up. Changing behavior for
nmcli device set "$DEV" managed no
To get the previous behavior, one has to first disconnect the interface
via
nmcli device disconnect "$DEV"
nmcli device set "$DEV" managed no
Note that non-permanent addresses like from DHCP will eventually time
out because NetworkManager stops the DHCP client. When instructing
NetworkManager to let go of the device, you have to take it over in
any way you see fit.
https://bugzilla.redhat.com/show_bug.cgi?id=1371433
(cherry picked from commit 9e8218f99a)
This also ensures that we own a reference to the
NMPlatform, NMRouteManager and NMDefaultRouteManager
instances. See bug rh#1440089 where we might access
the singleton getter after destroing the singleton
instance of NMRouteManager. This is prevented by
keeping a reference to those instances -- indirectly
via the netns instance.
Later, we may add support for multiple namespaces. Then it might
make sense to swap the NMNetns instance of a device when moving
the device between namespaces.
Also, drop the use of singelton instances.
https://bugzilla.redhat.com/show_bug.cgi?id=1440089
(cherry picked from commit c48a19b7c6)
This moves tracking of connectivity to NMDevice and makes the NMManager
negotiate the best of known connectivity states of devices. The NMConnectivity
singleton handles its own configuration and scheduling of the permission
checks, but otherwise greatly simplifies it.
This will be useful to determine correct metrics for multiple default routes
depending on actual internet connectivity.
The per-device connection checks is not yet exposed on the D-Bus, since they
probably should be per-address-family as well.
When deciding whether to touch a device we sometimes look at whether
the active connection is external/assumed. In many cases however,
there is no active connection around (e.g. while moving the device
from state unmanaged to disconnected before assuming).
So in most cases we instead look at the device-state-reason to decide
whether to touch the interface (see nm_device_state_reason_check()).
Often it's desirable to have no state and passing data as function
arguments. However, the state reason has to be passed along several hops
(e.g. a queued state change). Or a change to a master/slave can affect
the slave/master, where we pass on the state reason. Or an intermediate
event might invalidate a previous state reason. Passing the state
whether to touch a device or not as a state-reason is cumbersome
and limited.
Instead, the device should be aware of whats going on. Add a
sys-iface-state with:
- SYS_IFACE_STATE_EXTERNAL: meaning, NM should not touch it
- SYS_IFACE_STATE_ASSUME: meaning, NM is gracefully taking over
- SYS_IFACE_STATE_MANAGED: meaning, the device is managed by NM
- SYS_IFACE_STATE_REMOVED: the device no longer exists
This replaces most checks of nm_device_state_reason_check() and
nm_active_connection_get_activation_type() by instead looking at
the sys-iface-state of the device.
This patch probably has still issues, but the previous behavior was
not very clear either. We will need to identify those issues in future
tests and tweak the behavior. At least, now there is one flag that
describes how to behave.
nm_device_uses_assumed_connection() basically called
nm_active_connection_get_assumed() on the device.
Rename those functions to be closer to the activation-type
flags.
The concepts of "assume", "external", and "assume_or_external"
will make sense with the following commits.
Scenario:
Have a connection with DHCPv4 and a default-route. When externally
removing the default route (`ip route delete 0.0.0.0/0`) and issuing
`nmcli device reapply $IF`, the default route was not restored.
That was because when externally removing the default route,
we would remove the gateway from priv->con_ip4_config (see
update_ip4_config()). Later, when reapplying the connection,
the IP method doesn't actually change. So we would not restart
DHCP and thus there is no gateway around to add the default route.
The default route would only be restored after receiving a DHCP lease
in the far future.
Fix that, by always restarting the IP method.
Add two new methods can_reapply_change() and reapply_connection() to
the device class. In this way device subclasses can declare that they
support the changes in a given setting and take care of reapplying it.
The state-change of a device has a reason argument, which is mostly for information
only.
There are many places in code that are the source of a state-reason.
Mostly these are calls to:
- nm_device_state_changed()
- nm_device_queue_state()
- nm_device_queue_recheck_available()
- nm_device_set_unmanaged_by_*()
- nm_device_master_release_one_slave()
- nm_device_ip_method_failed()
- nm_modem_emit_prepare_result()
- nm_modem_emit_ppp_failed()
- nm_manager_deactivate_connection()
- NM_SET_OUT (out_failure_reason, NM_DEVICE_STATE_REASON_*);
However, there are a few places in code that look at the reason
to decide how to proceed. I think this is a bad pattern, because
cause and effect are decoupled and it gets hard to understand where
a certain reason is set and what consequences that has.
Add a nop-function nm_device_state_reason_check() to mark all uses
of the device state reason that derive decisions from it. That is,
highlight the "effect" part.
This argument is only relevant when the NMActStageReturn argument
indicates NM_ACT_STAGE_RETURN_FAILURE. In all other cases it is ignored.
Rename the argument to make the meaning clearer. The argument is passed
through several layers of code, it isn't obvious that this argument only
matters for the failure case. Also, the distinct name makes it easier
to distinguish from other uses of the "reason" name.
While at it, do some drive-by cleanup:
- use g_return_*() instead of g_assert() to have a more graceful
assertion.
- functions like dhcp4_start() don't need to return a failure reason.
Most callers don't care, and the caller who does can determine the
proper reason.
- allow omitting the out-argument via NM_SET_OUT().
Use the per-connection authentication timeout for 802.1X Ethernet,
MACsec and Wi-Fi connections. In case the value is not defined, fall
back to the global one.
It allows derived classes to override the autoconnect-allowed
state.
We already have
- NM_DEVICE_AUTOCONNECT property, which is two parts:
- NMDevicePrivate::autoconnect_user, which is settable via
D-Bus by the use, to allow the device to autoconnect.
- NMDevicePrivate::autoconnect_intern, which is set by
internal decision.
- NM_DEVICE_AUTOCONNECT_ALLOWED signal, where other devices can
subscribe to block autoconnect. Currently that is only used
by NMDeviceOlpcMesh.
These two make up for nm_device_autoconnect_allowed().
Add another way to allow derived classes to disable autoconnect
temporarily. This could also be achieved by having the device
subscribe to NM_DEVICE_AUTOCONNECT_ALLOWED of self, or by adding
a signal slot. But a plain function pointer seems easier.
The NMDevice's autoconnect property is settable via D-Bus and is is
also modified by internal decision, like when no PIN is available.
Certain internal actions cause clearing the internal autoconnect flag,
but they should not override the user desicion.
For example, when NM awaks from sleep it would reenable autoconnect,
but it should not reenable it for devices where the user explicitly
said that autoconnect is to be disabled.
Similarly, activating a device alone is not yet an instruction to
re-enable autoconnect. If the user consciously disables autoconnect,
it should stay enabled. On the other hand, activating a device should
reenable autoconnect if it was blocked by internal decision.
We need to track these two flags separately, and set them accordingly.
Previously, we would have different functions like
- nm_match_spec_device_type()
- nm_match_spec_hwaddr()
- nm_match_spec_s390_subchannels()
- nm_match_spec_interface_name()
which all would handle one type of match-spec.
So, to get the overall result whether the arguments
match or not, nm_device_spec_match_list() had to stich
them together and iterate the list multiple times.
Refactor the code to have one nm_match_spec_device()
function that gets all relevant paramters.
The upside is:
- the logic how to evaluate the match-spec is all at one place
(match_device_eval()) instead of spread over multiple
functions.
- It requires iterating the list at most twice. Twice, because
we do a fast pre-search for "*".
One downside could be, that we have to pass all 4 arguments
for the evaluation, even if the might no be needed. That is,
because "nm-core-utils.c" shall be independend from NMDevice, it
cannot receive a device instance to get the parameters as needed.
As we would add new match-types, the argument list would grow.
However, all arguments are cached and fetching them from the
device's private data is very cheap.
(cherry picked from commit b957403efd)
Instead of overwriting ip4_config_pre_commit(), add a new function
get_mtu().
This also adds a default value in case there is no user-configuration.
This will allow us later to reset a default MTU based on the device
type.
The only implementations were there for tracking the parent device.
That is now donw via nm_device_parent_*(), parent_changed_notify()
and _parent_notify_changed().
Multiple subclasses have a parent/link interface (NMDeviceIPTunnel,
NMDeviceVlan). Tracking the parent interface properly is midly
complicated to get right. So, instead of repeating it in each
subclass, track it in the parent device.
Most implementations of realize_start_notify() do the same
for link_changed().
Let NMDevice's base implementation of realize_start_notify() call
link_changed() -- which by default does notthing. This allows subclasses
to only overwrite link_changed().
There's two parts of the configuration involved: the subnet addresses
and the DNS information.
For the addressing, the shared (downlink) device signals the policy needs for a
/64 subnet. When it gets one, it merges it into the autoconf configuration and
forwards to the NDisc. When more prefixes are needed, the (uplink) device asks
the DHCP manager and eventually signals delegation (reception) of a prefix.
The NMDevice only provides the mechanism, the actual subnetting needs to
be done by the NMPolicy.
For the DNS configuration, the shared device just copies it from
whichever device the policy deems suitable.
Before the link is initialized, that is before UDEV completed
initializing the device, we should not evaluate the user-settings
unmanaged flags.
The reason is, that evaluating it likely involves looking at the
permanent MAC address, which might use the wrong fake MAC address
(before UDEV set the right one). Also, it might use the wrong ifname
to lookup the permanent MAC address via ethtool.
