NMPolicy:auto_activate_device() would wrongly not free the
specific_object, although it is documented as transfer-full.
The only implementation of can_auto_connect() that returned
a specific-object is NMDeviceWifi:can_auto_connect(). So, there
wasn't any actual bug or memory leak.
Fixes: 4c028c7cef
Using the current, possibly non-permanent MAC address doesn't really
make sense.
Also, NM_DEVICE_HW_ADDRESS used to be writable and was set by NMDeviceBt
to the bdaddr. That is wrong, because bdaddr should not be the current
address, but the permanent one.
Introduce the nm_device_ip_method_failed() function to check if the
failure of an IP method should cause the activation to fail, and use
it where appropriate.
http://bugzilla.gnome.org/show_bug.cgi?id=741347
GError codes are only unique per domain, so logging the code without
also indicating the domain is not helpful. And anyway, if the error
messages are not distinctive enough to tell the whole story then we
should fix the error messages.
Based-on-patch-by: Dan Winship <danw@gnome.org>
Functions that take a GError** MUST fill it in on error. There is no
need to check whether error is NULL if the function it was passed to
had a failing return value.
Likewise, a proper GError must have a non-NULL message, so there's no
need to double-check that either.
Based-on-patch-by: Dan Winship <danw@gnome.org>
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Clone the connection upon activation. This makes it safe for the user
to modify the original connection while it is activated.
This involves several changes:
- NMActiveConnection gets @settings_connection and @applied_connection.
To support add-and-activate, we constructing a NMActiveConnection with
no connection set. Previously, we would set the "connection" field to
a temporary NMConnection. Now NMManager piggybacks this temporary
connection as object-data (TAG_ACTIVE_CONNETION_ADD_AND_ACTIVATE).
- get rid of the functions nm_active_connection_get_connection_type()
and nm_active_connection_get_connection_uuid(). From their names
it is unclear whether this returns the settings or applied connection.
The (few) callers should figure that out themselves.
- rename nm_active_connection_get_id() to
nm_active_connection_get_settings_connection_id(). This function
is only used internally for logging.
- dispatcher calls now get two connections as well. The
applied-connection is used for the connection data, while
the settings-connection is used for the connection path.
- needs special handling for properties that apply immediately
when changed (nm_device_reapply_settings_immediately()).
Co-Authored-By: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=724041
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
Create a GDBusProxy for the service to be monitored and use that to
tell whether it is running, rather than using NMDBusManager and the
global NameOwnerChanged signal.
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
because either GSM or CDMA is present. It is checked just above.
Coverity:
Defect type: DEADCODE
src/devices/bluetooth/nm-device-bt.c:312: dead_error_line: Execution cannot reach this statement: "fallback_prefix = dcgettext...".
Most NMDevice types defined their own error domain but then never used
it. A few did use their errors, but some of those errors are redundant
with NMDeviceError, and others can be added to it.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
NMDeviceBond, NMDeviceBridge, and NMDeviceTeam all used basically the
same code to generate a default interface name. Move it into
nm_utils_complete_generic().
For NMDeviceWifi and NMDeviceWimax, the printf format string for
nm_utils_complete_generic() was created based on ssid/nsp. Since
these input strings are untrusted, this is a serious bug.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Now that we have nm_utils_hwaddr_matches() for comparing addresses
(even when one is a string and the other binary), there are now places
where it's more convenient to store hardware addresses as strings
rather than binary, since we want them in string form for most
non-comparison purposes. So update for that.
In particular, this also changes nm_device_get_hw_address() to return
a string.
Also, simplify the update_permanent_hw_address() implementations by
assuming that they will only be called once. (Since they will.)
Add nm_utils_hwaddr_matches(), for comparing hardware addresses for
equality, allowing either binary or ASCII hardware addresses to be
passed, and handling the special rules for InfiniBand hardware
addresses automatically. Update code to use it.
Include <linux/if_ether.h> and <linux/if_infiniband.h> from
nm-utils.h, to get ETH_ALEN and INFINIBAND_ALEN, and remove those
includes (as well as <net/ethernet.h> and <netinet/ether.h>, and
various headers that had been included to get the ARPHRD_* constants)
from other files where they're not needed now.
GLib/Gtk have mostly settled on the convention that two-letter
acronyms in type names remain all-caps (eg, "IO"), but longer acronyms
become initial-caps-only (eg, "Tcp").
NM was inconsistent, with most long acronyms using initial caps only
(Adsl, Cdma, Dcb, Gsm, Olpc, Vlan), but others using all caps (DHCP,
PPP, PPPOE, VPN). Fix libnm and src/ to use initial-caps only for all
three-or-more-letter-long acronyms (and update nmcli and nmtui for the
libnm changes).
We no longer need a class method for reading the hardware address
length, for a couple reasons:
1) Using the IP interface hardware address for IP operations now makes
NMDevice's priv->hw_addr_len constant. So there's no reason to re-read
it all the time.
2) get_hw_address_length() is now only used for determining whether the
hardware address is permanent, and that only mattered for Bluetooth.
Since Bluetooth interfaces have a bogus interface name, they will never
have a valid ifindex, and thus nm_platform_link_get_address() would be
useless. So instead of using the 'permanent' stuff, just don't bother
updating the hardware address if the NMDevice's ifindex isn't valid,
and let subclasses pass the initial hardware address at device creation.
This also works correctly for NMDevice classes that previously
implemented get_hw_address_length() like ADSL and WWAN, since those
too will never have a valid ifindex or a valid hardware address.
3) Reading the device's hardware address length just ended up calling
nm_platform_link_get_address() for most devices anyway, so
nm_device_update_hw_address() would effectively read the link address
twice (once to read the length, the second time to read the actual
address). Let's just read the address once.
Remove all remaining GParamSpec name and blurb strings (and fix
indentation while we're there), and add G_PARAM_STATIC_STRINGS to all
paramspecs that were lacking it.
It's only ever used as an MAC address array, so we might as well
make it one instead of a string. Saves a memory allocation and
some cycles converting back and forth.
This also fixes a bug, where NMDeviceBt:check_connection_compatible()
would not set GError on mismatch of bdaddr.
Signed-off-by: Thomas Haller <thaller@redhat.com>
If the given PIN was wrong, we really don't want to try that PIN
again automatically because it might lock the SIM. To ensure that
doesn't happen, disable autoconnect so that the user must manually
request reconnection.
(this doesn't fix auto-connect-with-a-wrong-PIN completely, as
autoconnect is reset when resuming from sleep, but it's a start)
Determining when the NMDeviceModem is available and when different
connections are available is easier if the modem's state is tracked,
instead of using the separate Enabled and Connected properties.
These properties could not accurately represent the SIM lock state
and prevented NetworkManager from making the modem available for
auto-activation when locked, even if a PIN was available.
In this new scheme, the NMDeviceModem is UNAVAILABLE when the
ModemManager modem state is FAILED, UNKNOWN, or INITIALIZING. It
transitions to the NM DISCONNECTED state when the modem has finished
initializing and has not failed.
Once the NMDeviceModem is in DISCONNECTED state it can be activated
even if the SIM is locked and a PIN is required; the PIN will be
requested when starting activation, either from the connection itself
or via a secrets request. This makes auto-activation of WWAN
connections possible.
This also allows us to consolidate code dealing with modem enable/disable
into the base NMModem class using the modem state, and to log more modem
information for debugging purposes.
Make Bluetooth support a plugin using the new device factory interface.
Provides a 5% size reduction in the core NM binary.
Before After
NM: 1253016 1187224 (-5%)
BT: 0 85752
(all results from stripped files)
2014-03-03 09:32:41 -06:00
Renamed from src/devices/nm-device-bt.c (Browse further)
