Heavily modify Inaky's Intel WiMAX SDK glue (originally from connman)
to be more generic and more thread-safe, and suitable for use with
NetworkManager instead of rolling our own client code. Rewrite the
NMDeviceWimax code to mostly work.
Still to be done: actual connection logic, DHCP handling, spawning
wimaxd if it's not started yet
Instead of doing this in every device subclass, do it in the NMDevice
superclass. nm_device_can_activate() already did the same logic that
each of the subclass device_state_changed() handlers were doing to
figure out whether they could do the transition from unavailable
to disconnected, so just use that in NMDevice and kill lots of code.
Mark activation requests that contain connections to be assumed,
and use that to short-circuit various parts of the activation
process by not touching various device attributes, since they
are already set up. Also ensure the device is not deactivated
when it initially becomes managed, because that would kill the
connection we are about to assume.
* include/NetworkManager.h
introspection/nm-device.xml
- Add device state change reason for carrier changes
* src/nm-device-ethernet.c
- (set_carrier): use the carrier change reason when changing device
state in response to carrier changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4203 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
include/NetworkManagerVPN.h
- Add a few more state reasons for the device deactivated state
* src/nm-device-interface.c
src/nm-device-interface.h
- (nm_device_interface_deactivate): add a 'reason' argument
* src/nm-device.c
src/nm-device.h
- (nm_device_deactivate, nm_device_take_down): add a 'reason' argument
- (nm_device_state_changed): pass the state change reason to
nm_device_take_down()
- (nm_device_set_managed): take a 'reason' argument, and pass it along
to the state change function
* src/nm-manager.c
src/nm-manager.h
- (remove_one_device, handle_unmanaged_devices, sync_devices,
impl_manager_sleep): pass a reason code to nm_device_set_managed()
- (nm_manager_deactivate_connection): add a 'reason' argument and pass
something reasonable along to VPN deactivation
* src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-manager.h
- (nm_vpn_manager_deactivate_connection): add a 'reason' argument and
pass that along to nm_vpn_connection_disconnect()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4174 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add support for VPN subnet gateways (bgo #549196)
* include/NetworkManager.h
- Add key for internal VPN subnet gateway
* src/vpn-manager/nm-vpn-connection.c
- (ip_address_to_string): return a const from a static buffer so we
don't leak a lot of strings
- (print_vpn_config): print internal VPN gateway as well
- (nm_vpn_connection_ip4_config_get): grab internal VPN gateway from
VPN service too
- (nm_vpn_connection_get_ip4_internal_gateway): new function
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_replace_default_ip4_route): split into two, one for
VPN connections and one for normal devices
- (replace_default_ip4_route): break out route stuff into its own function
- (nm_system_replace_default_ip4_route_vpn,
nm_system_replace_default_ip4_route): simplify by having two cases,
one for VPNs and one for normal devices
* src/NetworkManagerPolicy.c
- (update_routing_and_dns): simplify, use split default route replacement
functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4169 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.c: Add a signal handler for the
"Failure" signal from VPN plugins, store the failure reason, and
use it when the state is changed to failure.
* introspection/nm-vpn-plugin.xml: Fix the "Failure" signal's type
description.
* include/NetworkManagerVPN.h (NMVPNConnectionStateReason): Add a new
reason to the end of the list to not break the API.
(NMVPNPluginFailure): Move it here (from libnm-glib/nm-vpn-plugin.h)
so it can be shared by plugins and daemon.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@4088 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
introspection/nm-device.xml
- Add a "missing firmware" device state reason
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_up_down): add a no_firmware argument
- (nm_system_device_set_up_down_with_iface): if the result of setting
IFF_UP is ENOENT, that almost always means missing firmware
* src/backends/NetworkManagerGeneric.c
src/nm-device-ethernet.c
src/nm-device-private.h
src/nm-device-wifi.c
src/nm-device.c
src/nm-device.h
src/nm-hso-gsm-device.c
src/vpn-manager/nm-vpn-connection.c
- Pass no_firmware along; check it where appropriate
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3983 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add the DHCP4Config D-Bus interface
* libnm-glib/Makefile.am
libnm-glib/nm-dhcp4-config.c
libnm-glib/nm-dhcp4-config.h
- Handle DHCP4 config objects exported by NM over D-Bus
* libnm-glib/nm-device.c
libnm-glib/nm-device.h
- Add a 'dhcp4-config' property
* libnm-glib/libnm-glib-test.c
- Print out DHCP4 config for devices
- Fix some crashes when no connections are active
* src/nm-device-interface.c
src/nm-device.c
src/nm-dhcp4-config.c
src/nm-dhcp4-config.h
- Treat dhcp4-config object as an object path at the D-Bus interface so
that when it doesn't exist we can proxy it as "/" which dbus-glib
doesn't let us do when the property type is G_TYPE_OBJECT
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3905 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Modify the NMDevice::state-changed signal to include the previous state
and reason. Enables the applet to provide more information why device
activation failed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3819 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tambet Ingo <tambet@gmail.com>
* src/ppp-manager/nm-ppp-manager.c: Add ppp stats monitoring, signal the
changes.
* src/nm-serial-device.c: Monitor "ppp-stats" signals from NMPPPManager. Add
a signal to emit these changes over dbus.
* src/Makefile.am: Genereate nm-serial-device-glue.
* libnm-glib/nm-serial-device.[ch]: Implement.
* libnm-glib/nm-cdma-device.[ch]
libnm-glib/nm-gsm-device.[ch]: Inherit from NMSerialDevice.
* libnm-glib/Makefile.am: Add nm-serial-device.[ch].
* introspection/nm-device-serial.xml: Implement.
* introspection/all.xml: Fix a couple of typos, add nm-device-serial.xml.
* introspection/Makefile.am: Add nm-device-serial.xml.
* include/NetworkManager.h: Add a DBus interface for serial device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3740 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-dbus-settings.c (constructor): Fix the
"PropertiesChanged" signal signature.
* libnm-glib/nm-dbus-connection.c (constructor): Use the common GType
defined in nm-dbus-glib-types.h.
Don't register the connection on dbus, we're a proxy class to
communicate with an already registered connection over dbus.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement new subclasses of NMSettings and NMExportedConnection to make
it easier for the applet to access and modify system settings.
* libnm-glib/nm-dbus-connection.[ch]:
* libnm-glib/nm-dbus-settings.[ch]:
* libnm-glib/nm-dbus-settings-system.[ch]: Implement.
* libnm-glib/Makefile.am: Add the new files to build, generate some more
bindings and glue.
* include/NetworkManager.h: Define the system settings DBus interface.
2008-04-30 Tambet Ingo <tambet@gmail.com>
Implement additional C API for exported connections to make them identical
with the DBus API. Change the (list_connections) virtual function to be
more usable from C - instead of requiring implementers to return a GPtrArray
of dbus paths, return a list of connections.
* libnm-glib/nm-settings.c (nm_exported_connection_class_init): Fix a typo.
(nm_settings_list_connections):
(nm_exported_connection_new):
(nm_exported_connection_update):
(nm_exported_connection_delete): Implement.
(impl_settings_list_connections):
(impl_exported_connection_update):
(impl_exported_connection_delete): Use the new public functions to make
sure the C and dbus interfaces stay in sync.
* system-settings/src/dbus-settings.c (list_connections): Return a list of
connections.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3630 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add NMActiveConnectionState enum
* introspection/nm-active-connection.xml
introspection/nm-vpn-connection.xml
- Add 'State' property for overall active connection state
- Add 'Default' property, when True means this active connection
has the default route
- Add PropertyChanged signals so changes actually go out over the bus
* src/nm-active-connection.h
- Add defines for State & Default properties
* src/nm-activation-request.c
- Add 'state' and 'default' properties, hook up to device 'state-changed'
signal to determine active connection state
* src/vpn-manager/nm-vpn-connection.c
src/vpn-manager/nm-vpn-connection.h
src/vpn-manager/nm-vpn-manager.c
src/vpn-manager/nm-vpn-service.c
- Rename old 'state' to 'vpn-state'
- Rename nm_vpn_connection_get_state() -> nm_vpn_connection_get_vpn_state()
- Add 'state' and 'default' properties, hook up to the vpn connection's
'vpn-state-changed' signal
* libnm-glib/nm-active-connection.c
libnm-glib/nm-active-connection.h
- Add new 'state' and 'default' properties and accessors
* libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
- Rename old 'state' property to 'vpn-state'
- Add new 'state' and 'default' properties and accessors
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3582 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
