The name nm_device_get_priority() is misleading. Nowadays it's only used
for the default route metric, and nothing else.
Rename it, and make it static.
One might already question the existance of nm_utils_parse_inaddr_bin(),
because it only wraps inet_pton(), which by itself isn't terrible API.
The reason nm_utils_parse_inaddr_bin() exists, is to mirror to nm_utils_parse_inaddr()
function, which has additional functionality on top of inet_pton().
But we shouldn't have more then one wrapper for inet_pton().
For some logging lines this changes the domain
from LOGD_PPP or LOGD_MB|LOGD_IP4 to LOGD_MB.
Also, it changes the format of the prefix, and
adds a prefix for some logging lines that didn't
have one previously.
gcc doesn't consider variables with cleanup attribute as unused.
clang does, and warns about them.
In one case, clang is right, in the other one the warning is bogus.
Fix both.
Found by clang warning:
src/devices/nm-device.c:11370:14: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
|| NM_UNMANAGED_USER_UDEV
^ ~~~~~~~~~~~~~~~~~~~~~~
Fixes: 5778bc6a34
Allow passing a pretty name for the zero flag 0, like "none".
Also, don't require flags to be power-of-two. Instead, allow names for
multiple flags. For example an "all" name. By specifying multi-value
flags first, their nick will be supersede the more specific flags.
Probably it doesn't make sense in usual cases, but nm_utils_flags2str()
should prevent such use.
If unrealize() failed we returned without thawing notify signals. Fix
this by moving g_object_freeze_notify() after the
unrealization/deletion but before the properties are reset in
unrealize_notify().
Fixes: a93807c288
- clearify in the manual page that setting retry to 1 means to try
once, without retry.
- log the initially set retry value in nm_settings_connection_get_autoconnect_retries().
- use nm_settings_connection_get_autoconnect_retries() in
nm_settings_connection_can_autoconnect().
Split out a separate function _method_call_handle(). That way we can get
rid of the "goto out" and use cleanup attribute to manage resources inside
_method_call_handle().
- use nm_utils_addr_family_to_char(). It asserts that the input argument
is either AF_INET or AF_INET6.
- rename variable @family to @addr_family for consistency.
- when logging addr_family for activation-stage, use v4 or v6 instead
of numeric AF_INET/AF_INET6.
Move creating the logging output inside the logging macro, so it is
evaluated lazyly. Also, use a stack-allocated buffer.
Drop the redundant @inet4 variable.
Since commit 6845b9b80a ("device: delay
startup complete until device is initialized in platform", we also wait
for devices that are still initializing platform/UDEV.
Obviously, that only applies to realized devices.
Otherwise, an unrealized device is going to block startup complete.
Fixes: 6845b9b80a
Sometimes, when we have a platform object, we need to keep it
alive, because any subsequent platform operation might invalidate
the object.
Previously, we achieved that by copying the NMPlatformLink data.
For a while now, all platform object are immuable and recounted.
We should not copy the instance to a NMPlatformLink object, because
then the instance is no longer a full NMPObject. Instead, just take an
additional reference. Since the object must be immutable, that is
just as safe. But now callees down the stack get a proper NMPObject
instance, and might reference it too.
We call _platform_link_cb_idle() on idle, so we must take care of the lifetime
of NMManager.
We don't want to take a reference, so that the manager is not kept alive
by platform events.
Refactor the previous implementation with weak pointers to use a linked list
instead. Let's not have any pending idle actions after the manager instance
is destroyed. Instead, properly track and cancel the events.
We should reduce uses of singletons in general. Instead, the platform
instance should be passed around and kept for as long as it's needed.
Especially, as we subscribe platform_link_cb() signal. Currently, we
never unsubscribe it (wrongly). Subscribing signals is a strong
indication that the target object should keep the source object alive
until the signal is unsubscribed.
In case the connection is blocked because it failed, the availability
of a master is a good reason to unblock it so that it can be tried
again.
Fixes: a1ea422aad
Distinguish between connections blocked from autoconnecting by user
request and connections blocked because they failed (and would fail
again).
Later, the reason will be used to unblock failed connection when some
conditions change.
We already have various ways to mark a device as unmanaged.
1) via udev-rule ENV{NM_UNMANAGED}. This can be overwritten via D-Bus
at runtime.
2) via settings plugin. That is NM_CONTROLLED=no for ifcfg-rh and
keyfile.unmanaged-devices in NetworkManager.conf.
3) at runtime, via D-Bus. This is persisted in the run state file
and persists restarts (but not reboot).
This adds another way via NetworkManager.conf file. Note that the
existing keyfile.unmanaged-devices (above 2) is also a configuration
optin in NetworkManager.conf. However it has various downsides:
- it cannot be overwritten at runtime (see commit
c210134bd5).
- you can only explicitly mark a device as unmanaged. That means,
you cannot use it to manage a device which is unmanaged due to
a udev rule.
- the name "keyfile.*" sounds like it's only relevant for the keyfile settings
plugin. Nowadays the keyfile plugin is always loaded, so the option applies
to NetworkManager in general.
https://github.com/NetworkManager/NetworkManager/pull/29
nm_device_match_parent() is called to check whether a device is
compatible with a given parent (UUID or interface). Accept any UUID If
there is no connection active on the device.
Without this, when there is a VLAN/MACVLAN connection with a parent
UUID the manager would create the device in
system_create_virtual_device(), realize it and then at the next call
of system_create_virtual_device() it would notice that the connection
is not compatible with the device because of the parent UUID;
therefore the manager would try to create again the same device,
failing.
https://mail.gnome.org/archives/networkmanager-list/2017-September/msg00034.html
The return value of g_hash_table_add() was added in GLib 2.40, use the
wrapper to avoid compile error on older versions:
src/nm-policy.c: In function ‘auto_activate_device’:
src/nm-policy.c:1279:7: error: void value not ignored as it ought to be
Fixes: a1ea422aad
When a connection is autoactivated NMPolicy only detects a failure by
watching the device state, or when the activation fails immediately.
If the activation fails after the asynchronus authorization check
before the device enters the PREPARE state, no other connection is
tried.
Let NMPolicy watch the active-connection state to detect early
failures and disconnect the signal handler when we detect that the
device state is progressing.
https://bugzilla.redhat.com/show_bug.cgi?id=1310676
Whenever we call a platform operation that reads or writes the netlink
socket, there is the possibility that the cache gets updated, as we
receive netlink events.
It is thus racy, if nm_platform_ip_route_sync() *first* adds routes, and
then obtains a list of routes to delete. The correct approach is to
determine which routes to delete first (and keep it in a list
@routes_prune), and pass that list down to nm_platform_ip_route_sync().
Arguably, this doesn't yet solve every race. For example, NMDevice
calls update_ext_ip_config() during ip4_config_merge_and_apply().
That is good, as it resyncs with platform. However, before calling
nm_ip4_config_commit() it calls other platform operations, like
_commit_mtu(). So, the race is still there.
Since commit a21b8882cc ("device: update
external configuration before commit"), we correctly re-sync the
external IP configuration before a merge, in case we notice that
there were some changes in platform.
Go a step further, and do the full update_ext_ip_config(). We should
have one way how to capture the external config, including intersect
and subtract. Otherwise, we end up with an @ext_ip4_config, which is
different from how it looks usually.
Refactor the code. There should be no changes in behavior at all.
The point is, to be able to reuse update_ext_ip_config() in the
next commit.
And also, I think it's an antipattern to have mirroring functions like
ip4_xyz() and ip6_xyz(). Instead, there should be one function, with
extra addr_family argument. That way, it'much clearer where two
implementations differ and where they are identical.
Basically, it moves the differentiation per the address family down
the call stack, closer to the place where the behavior is actually
different.
Kernel does not allow to add a route with table 0 (RT_TABLE_UNSPEC). It
effectively is an alias for the main table. We must consider that when
comparing routes sementically.
If the commit of static connection parameters fails before starting
RA, we should reset @con_ip6_config; otherwise any external update
arriving before the commit of RA parameters will remove from
@con_ip6_config all parameters not present externally, because in
update_ip6_config() we do:
/* This function was called upon external changes. Remove the configuration
* (addresses,routes) that is no longer present externally from the internal
* config. This way, we don't re-add addresses that were manually removed
* by the user. */
if (priv->con_ip6_config)
nm_ip6_config_intersect (priv->con_ip6_config, priv->ext_ip6_config);
Instead if @con_ip6_config is cleared it will be rebuilt from the
connection setting at the next commit.
Fixes-test: @ipv6_preserve_cached_routes
