Moving the PPP manager to a separate plugin that is loaded when needed
has the advantage of slightly reducing memory footprint and makes it
possible to install the PPP support only where needed.
https://bugzilla.gnome.org/show_bug.cgi?id=773482
This makes it easier to install the files with proper names.
Also, it makes the makefile rules slightly simpler.
Lastly, the documentation is now generated into docs/api, which makes it
possible to get rid of the awkward relative file names in docbook.
Added platform functions to retrieve device link mode status and to
switch from auto to manual link negotiation:
nm_platform_ethtool_get_link_settings
nm_platform_ethtool_set_link_settings
Keep the include paths clean and separate. We use directories to group source
files together. That makes sense (I guess), but then we should use this
grouping also when including files. Thus require to #include files with their
path relative to "src/".
Also, we build various artifacts from the "src/" tree. Instead of having
individual CFLAGS for each artifact in Makefile.am, the CFLAGS should be
unified. Previously, the CFLAGS for each artifact differ and are inconsistent
in which paths they add to the search path. Fix the inconsistency by just
don't add the paths at all.
With systemd < 219, restarting the journald service closes the stdout
and stderr streams associated with services.
The NM process has SIGPIPE ignored, but g_spawn_sync()/g_spawn_async()
re-enable it and so any child executed with those functions will
terminate by default if it tries to log anything to stdout/stderr.
The teamd instance launched by NM is affected by this problem since it
writes debug messages before actually ignoring SIGPIPE.
To fix this, use the @child_setup callback of g_spawn() to ignore
again SIGPIPE in the child process.
https://bugzilla.redhat.com/show_bug.cgi?id=1393853
Otherwise its path remains visible on D-Bus despite the object is gone,
making libnm sad and grumpy:
libnm-WARNING **: no object known for /org/freedesktop/NetworkManager/AccessPoint/666
On some architectures, it seems we don't properly expose
the symbol of these static variables from NetworkManager
binary.
Just avoid that and don't instead use a static array
inside the device plugin itself.
While at it, make the arrays all const, which possibly allows
the linker to put those symbols in the read-only section.
When the device has an IP interface different from the main one, we
previously took the MTU saved in priv->mtu (which is the MTU initially
set on the underlying interface) and applied it to the IP interface.
This is wrong as it forces the two MTUs to be equal and breaks
connectivity for devices with encapsulation (as PPP). Instead, track
the two MTUs in different variables.
https://bugzilla.redhat.com/show_bug.cgi?id=1385198
It is a bit fragile not to clone the string because we depend on
nm_ip6_config_get_search(priv->ip6_config) to be stable.
In practice, it's no problem. Saves an additional strdup and the
effort to cleanup the memory afterwards.
- only record @now timestamp if we actually need it.
- use gint32 for @now. It seems wrong that NMNDiscDNSServer
uses guint32 for the timestamp. We keep
nm_utils_get_monotonic_timestamp_s() as gint32 for a reason.
- ensure the arrays are initialized to zero. E.g.
ndisc_addr->dad_counter was uninitalized.
- set the size for arrays outside the loop
- use g_array_unref(). I think that is usually better. It makes
only a difference when somebody else holds a reference to the
array. And in that case, it usually seems better not to clear
the array, just release your refrence.
You cannot assume that we are always able to lookup a corresponding
lnk object. In fact, there is no guarantee that link->ifindex still
exists in the platform cache at all.
The compiler warns us when we don't specify all enum values
in a switch(), provided that default: is missing.
Make use of that to get a warning when we add a new tunnel mode.
When an IP-tunnel connection with mode different from the implemented
ones was activated, an assertion failed in tunnel_mode_to_link_type().
Instead we should return NM_LINK_TYPE_UNKNOWN there and fail the
activation.
There's two parts of the configuration involved: the subnet addresses
and the DNS information.
For the addressing, the shared (downlink) device signals the policy needs for a
/64 subnet. When it gets one, it merges it into the autoconf configuration and
forwards to the NDisc. When more prefixes are needed, the (uplink) device asks
the DHCP manager and eventually signals delegation (reception) of a prefix.
The NMDevice only provides the mechanism, the actual subnetting needs to
be done by the NMPolicy.
For the DNS configuration, the shared device just copies it from
whichever device the policy deems suitable.
Utilizes RFC 3633 prefix option in role of requesting router to ask the
delegating router for prefixes. In future we'll be able to use the
addresses from those prefixes on ipv6.method=shared connections.
This esentially causes us to announce the prefixes of the addresses we
own and the DNS configuration.
Currently the only way to get the IPv6 configuration on such device is
manual setting in the connection. This will change with IPv6 prefix
delegation.
The ndisc config can now be changed by NMDevice as well when the NDisc
is in ROUTER mode. But what we're really interested in is when we
receive a new one from the outside.
We'll soon not only do the router discovery, but announce ourselves as a
reouter. "Neighbor discovery" sounds to be a more appropriate name for
the class than "Router discovery".
For example for tun devices we get a lot of
(tun7): hw-addr: failed reading current MAC address
warnings. Just be silent about it. We log when something
changes, we don't need to log when we fail to obtain
a MAC address.
Thereby, refactor nm_device_update_hw_address() to return early.
The unmanaged flags PLATFORM_INIT indicates whether UDEV is done
initializing the device. We should not handle IP config changes
before that pointer.
This avoids codepaths that require the permanent MAC address of the
device. We should not freeze the permanent MAC address before
UDEV initialized the device, for two reasons:
- getting the permanent MAC address using ethtool is racy as
UDEV might still rename the interface.
- freezing a fake permanent MAC address should only happen after
UDEV is done configuring the MAC address of software devices.
#0 0x000055555568bc7a in nm_device_update_permanent_hw_address (self=self@entry=0x555555f0fb70 [NMDeviceVeth], force_freeze=force_freeze@entry=1) at src/devices/nm-device.c:11817
#1 0x000055555568c443 in nm_device_get_permanent_hw_address_full (self=self@entry=0x555555f0fb70 [NMDeviceVeth], force_freeze=force_freeze@entry=1, out_is_fake=out_is_fake@entry=0x0)
at src/devices/nm-device.c:12227
#2 0x000055555568cb06 in nm_device_get_permanent_hw_address (self=self@entry=0x555555f0fb70 [NMDeviceVeth]) at src/devices/nm-device.c:12237
#3 0x000055555568cb50 in spec_match_list (self=0x555555f0fb70 [NMDeviceVeth], specs=0x555555a5c000 = {...}) at src/devices/nm-device.c:12294
#4 0x00005555556a4ee6 in spec_match_list (device=0x555555f0fb70 [NMDeviceVeth], specs=0x555555a5c000 = {...}) at src/devices/nm-device-ethernet.c:1461
#5 0x00005555556978db in nm_device_spec_match_list (self=self@entry=0x555555f0fb70 [NMDeviceVeth], specs=0x555555a5c000 = {...}) at src/devices/nm-device.c:12277
#6 0x000055555558e187 in _match_section_infos_lookup (match_section_infos=0x555555a5d500, keyfile=0x555555a46f80, property=property@entry=0x555555793123 "ipv4.route-metric", device=device@entry=0x555555f0fb70 [NMDeviceVeth], out_value=out_value@entry=0x7fffffffe018) at src/nm-config-data.c:1169
#7 0x00005555555922ca in nm_config_data_get_connection_default (self=0x555555a548c0 [NMConfigData], property=property@entry=0x555555793123 "ipv4.route-metric", device=device@entry=0x555555f0fb70 [NMDeviceVeth]) at src/nm-config-data.c:1234
#8 0x00005555556790cd in _get_ipx_route_metric (self=self@entry=0x555555f0fb70 [NMDeviceVeth], is_v4=is_v4@entry=1) at src/devices/nm-device.c:1142
#9 0x000055555567912e in nm_device_get_ip4_route_metric (self=self@entry=0x555555f0fb70 [NMDeviceVeth]) at src/devices/nm-device.c:1161
#10 0x000055555567da6c in ip4_config_merge_and_apply (self=self@entry=0x555555f0fb70 [NMDeviceVeth], config=config@entry=0x0, commit=commit@entry=0, out_reason=out_reason@entry=0x0)
at src/devices/nm-device.c:4787
#11 0x000055555567e0fb in update_ip4_config (self=self@entry=0x555555f0fb70 [NMDeviceVeth], initial=initial@entry=0) at src/devices/nm-device.c:9532
#12 0x0000555555693acd in queued_ip4_config_change (user_data=0x555555f0fb70) at src/devices/nm-device.c:9651
#13 0x00007ffff4c966ba in g_main_context_dispatch (context=0x555555a46af0) at gmain.c:3154
#14 0x00007ffff4c966ba in g_main_context_dispatch (context=context@entry=0x555555a46af0) at gmain.c:3769
#15 0x00007ffff4c96a70 in g_main_context_iterate (context=0x555555a46af0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3840
#16 0x00007ffff4c96d92 in g_main_loop_run (loop=0x555555a47400) at gmain.c:4034
#17 0x000055555558372a in main (argc=<optimized out>, argv=<optimized out>) at src/main.c:411
Before the link is initialized, that is before UDEV completed
initializing the device, we should not evaluate the user-settings
unmanaged flags.
The reason is, that evaluating it likely involves looking at the
permanent MAC address, which might use the wrong fake MAC address
(before UDEV set the right one). Also, it might use the wrong ifname
to lookup the permanent MAC address via ethtool.
The permanent MAC address of an NMDevice shall not change as
long as the device is realized. That is, we read it only once
and don't change it afterwards.
There are two issues that this commit tries to mitigate:
(1) users are advised to use UDEV to rename interfaces. As we lookup
the permenent MAC address using ethtool (which uses the interface
name), there is a race where we could read the permanent MAC
address using the wrong interface name. We should wait until
UDEV finished initializing the device and until the interface
name is stable (see rh#1388286).
This commit still cannot avoid the race of ethtool entirely. It only
tries to avoid ethtool until UDEV has done its work. That is, until we
expect the interface name no longer to change.
(2) some device types, don't have a permanent MAC address so we fall
back to use the currently set address (fake). Again, users are advised
to use UDEV to configure the MAC addresses on such software devices.
Thus, we should not get the fake MAC address until UDEV initialized
the device.
This patch actually doesn't solve the problem at all yet.
The reason is that a regular caller of nm_device_get_permanent_hw_address() can
not afford to wait until UDEV settled. Thus, any user who requests the
permanent MAC address before the link is initialized, runs into the
problems above.
In a next step, we shall revisit such calls to nm_device_get_permanent_hw_address()
and delay them until the link is initialized.
